Hi
I ahve a problem during FW downgreade.
All files are readed by downloader and after pressing Start buton, app reseting device only.
Any idea?
Related
I tried to update my i5801 to froyo but it stuck to the samsung logo. then when i replaced the battery an connected the phone again to PC, it showed ‘USB not recognized’. then i hard reset the phone by going in to recovery mode and wiped the user data, but the task did not finish and got stuck in to ‘wiping data… Formatting data:…’ . then i replaced the battery and restarted fone in normal mode. It now shows ‘GT-i5800′ in the center of the screen and ‘samsung’ at the bottom of the screen. what should i do now? please help.
Do you mean, you are upgraded to froyo using Odin?
If yes, which version you tried to install?
Maybe one solution with odin
Hi!
If your phone crash at start, try to do that: (ok on my I5800 Phone)
1- Go to samfirmware site (need free register), load the lastest froyo (I5800XXJPF), and .ops file in the bottom of page.
2- Unzip the firmware using password. (giving on the firmware page)
3- Launch odin, and select ops, boot, phone, pda, csc downloaded in first step.
4- Launch your phone in "downloading mode" (press vol- / center button and power)
5- Plug your phone with usb.
6- In Odin, click start when your phone is recognize and wait t'ill it's done.
I hope it help you. Sorry for my poor english.
Have a good day
@asif: still u r confused??
Sent from my GT-I5800 using the XDA mobile application powered by Tapatalk
Same problem
I have same problem
i loaded the JPA 2.2 update successfully and even rooted using super oneclick
everything was working fine.
suddenly the phone froze
i took out the battery and after restarting it just stays stuck on the i5800 logo screen
i tried loaded jpa again and also jpb it gets completed
but the phone doesnt go beyond the logo screen
will try loading jpf if that doesnt work i will try the default jg6 rom...
if someone has any more things i can try, the info would be much appreciated
ok jpf has worked and phone has booted successfully
same thing happened with me...
with new JP9 update...
it got stuck on samsung logo forever..
so I reflashed to JG6
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
manuel80 said:
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
Click to expand...
Click to collapse
Try flashing. Look at the link in my sig.
Its nothing big
The same happened to me. I then searched the net and found this wonderful site. I flashed the original rom, then got bolder and started flashing froyo roms and am now happily flashing custom roms ! I can say I enjoy my phone more now!!. Flash your phone too!!
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
manuel80 said:
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
Click to expand...
Click to collapse
You can try to factory reset it... Follow the following
Press Vol Up + Vol Down Key (Press in middle so that both are pressed)
Press Home Key
Now Press Power
GT I5801 logo will appear
Leave the keys and your phone will boot into recovery
Try wiping cache first and if not working factory reset it
If after this it doesnt work, Install Kies...It will install drivers
Follow the above steps except press vol down key instead of both
Phone will go into download mode.... Plug in USB and flash it
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Just flash your phone with new rom. For this use Odin and OPS file and rom .
Boot into download mode of gt-5800 by using vol - , power and home button all at a time. Then you can flash new firmware from Odin , use one package or other option specific to rom and your phone will start working again. Hope this helps.
Post any problem while flashing.
manuel80 said:
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Click to expand...
Click to collapse
Did the phone hung during upgrade process or Kies hung during download process?
If phone hung during upgrade process and now you cannot boot that means your phone is hard bricked. This is because when you upgrade the phone through kies, it updates the boot loader and when phone hung during the process means bootloader is corrupted. In this scenario, you need to take the phone to service center and get hardware replaced
then I guess I'll have to bring your cell phone service ... damn ..
Grazzi guys for the help anyway .. I just know you know the developments of the case ..
hello
have you ever tried anything like flashing before? if not take it to samsung service centre and say it is not switching on.
I had the 5.1.6a firmware and tried to install 5.1.6g through some method described in the maizufuns forum. Did everything by the book and when i restarted my phone it didn't open it was stack at the meizu logo (not the blue logo when your phone poewrs up but the black logo). Simply poot and doesnt power up.
The only thing that works is Volume up + Power Button to enter recovery mode but i ender fastboot instead with only two options
1) System Upgrade
2) Clear Data
And an empty recovery file in my PC similar to a usb stick
I tried to copy-paste new firmwares in the phone through the PC older and newer, chinese and global but nothing works. When I try to upgrade I get "firmware corrupt" message
specificaly I tried 4.1.4 , 5.1.1a+g , 5.1.6a+g , and 1 more 4something versions of flyme
Searched a while for a reason to upgrade with flashing but didn't get anywhere
I have also seen posts 2-5 months old with similar problems that got no response. Is there a possible solution???
Any ideas are welcome. Thank you
Edit: Dragged and dropped chinese firmware 4.2.6.2 to recovery file and upgraded through fastboot.. for some strange reason this version worked fine and upgraded
suddenly i putt the code *#2663# and update the Touch Keys FW after that soft keys are not working even never lighting up i do reset wipe date cache re flashing downgrading root but not success the problem not solved please help me
please see the screenshot the Touch key update is not showing there
no one is here to help me not expert here our developer ???
Did you do this whilst on stock firmware?
yes i do this on stock rom
Try flashing a clean stock image with Odin.
Hello ,
Can't hard reset my huawei y3c everytime i try ti reset it says that data wipe completed and nothing changes in the phone , tried to flash it using research download tool it shows flashing normally and no problems and operation passed but nothing changes too ,restarting twice before booting , when i get into phone after unlocking screen it keeps showing stopped working messages about com.process.acore and black background and no home but i can swipe from up to see notifications and open settings but stopped working messages are showing continously when i try to change any settings and go back nothing changes , when i connect the phone to pc and try to delete any file it says "filename couldn't be deleted , The device has either stopped responding or has been disconnected." with options (skip , skip all , cancel) , can't even rename or do anything , can someone tell me what's problem or whats wrong with it?
Thanks in advance
Best regards
Edit : i found similar issue under title "Read only internal storage" but i can't solve it without root and i found a script here but when i try to update it using stock recovery getting signature error