Related
Hello again,
I was having problems with my old battery and i tried to hard reset my phone when the power was almost half but the batter suddenly hanged my fone in the middle of formatting and now i brought a new battery and its not entering BOOTLOADER MODE when i press the Bulb+Power+Reset button
When i place the phone on charging the indicator on the Phone glows Red and it wont turn on the phone or wont go to bootloader mode...if only you guys can explain me how to enter bootloader mode then i can do the rest.
Thanks.
P.S : Despite all the problems i face using a WM i still love it the most.
Common guys...this forum is my only hope....as i dont have any HTC service centre near my place.
Hoping for some usefull adivces.
ZODI said:
Hello again,
I was having problems with my old battery and i tried to hard reset my phone when the power was almost half but the batter suddenly hanged my fone in the middle of formatting and now i brought a new battery and its not entering BOOTLOADER MODE when i press the Bulb+Power+Reset button
When i place the phone on charging the indicator on the Phone glows Red and it wont turn on the phone or wont go to bootloader mode...if only you guys can explain me how to enter bootloader mode then i can do the rest.
Thanks.
P.S : Despite all the problems i face using a WM i still love it the most.
Click to expand...
Click to collapse
Bootloader mode:
1) Press the Light Button
2) Press the power button
(silver thing at the bottom)
3) Press something into the reset button and hold for 2-5 seconds
If this does not work READ the Wiki
Good luck,
orb3000 said:
Bootloader mode:
1) Press the Light Button
2) Press the power button
(silver thing at the bottom)
3) Press something into the reset button and hold for 2-5 seconds
If this does not work READ the Wiki
Good luck,
Click to expand...
Click to collapse
Thanks for the reply but i already tried it....
My phone doesn't go into BOOTLOADER mode.
I have previously installed many roms and tested them but this time it doesnt seem to go to bootloader mode itself...
When i place the phone on charger it shows RED light that its charging but after few mins it turns off....i brought a new Battery as well just incase but i am still unable to go to bootloader mode.
If only i can go into bootloader mode i can do the rest,
Any smallest help is appreciated guys.
~ZODI.
Just incase if anyone wanted to know how i.....
How i screwed up my HTC Universal ?
I tried to Hard Reset it when the battery was running on low power and while the process of hard resetting was going on it suddenly shut down due to low power and now it wont even enter bootloader mode....Any help guys ? i purchased it from dubai and i dont even have any HTC repair centre in my city...not that i know off.
Right now i removed the battery of my Phone and i placed it on charging just hoping that there is an internal battery in the device and when it gets charged i should be able to go into bootloader mode but im not sure if what i think is right .
Still unable to find any solutions guys....help me out please.
Most common repair trick you have tried.
Can u take a look at this ?
http://www.mikechannon.net/PDF Manuals/HTC Universal_Service-Manual.pdf
subratamm said:
Most common repair trick you have tried.
Can u take a look at this ?
http://www.mikechannon.net/PDF Manuals/HTC Universal_Service-Manual.pdf
Click to expand...
Click to collapse
I dont think i am willing to open my phone like that....unless there is someone who can help me out constantly on the forum ( some technician )
As i dont want to completly screw it up.
are you sure its not in bootloader - look closer its very dim as no backlight
colinc57 said:
are you sure its not in bootloader - look closer its very dim as no backlight
Click to expand...
Click to collapse
Yes i am very sure, As i have previously installed many ROMS on it but this time its not even going into bootloader mode.
I doubt that the bootloader mode itself is currupted or something is there a way to install a fresh bootloader mode ?
Kindly help me out its been a month i havnt used my phone now.,using a Motorola W220 ,from jasjar to w220 is not a very good feeling guys. please sort my problem i dont have anyone to guide me here.
Funny thing is i found a HTC repair center and the guys over their said they only repair HTC products not Imate and imate service centre in whole aisa = 5 or 6 :| checked it on club imate site.
subratamm said:
Most common repair trick you have tried.
Can u take a look at this ?
http://www.mikechannon.net/PDF Manuals/HTC Universal_Service-Manual.pdf
Click to expand...
Click to collapse
Thanks for your help. I've tried the remedies outlined in the PDF document, including flashing the memory via the SD card. This does not solve the problem.
Any suggestions?
teritius said:
Thanks for your help. I've tried the remedies outlined in the PDF document, including flashing the memory via the SD card. This does not solve the problem.
Any suggestions?
Click to expand...
Click to collapse
Teritius are you able to enter bootloader mode bro ?
ZODI said:
Teritius are you able to enter bootloader mode bro ?
Click to expand...
Click to collapse
Yes, that's the funny part; can enter bootloader mode. I've followed the instructions to burn a new ROM to the SD card. After I burn the new ROM to the SD card, I can then burn the new ROM, but as soon as I choose to hard reboot my device, I receive a message reading; CLEARING, then the display fades and nothing further happens.
I will post this answer in the other threads with this problem, but I installed Tomal's WM6.1 v8.2 and the phone worked fine afterward. I think the problem is that some phones don't accept all ROMS.
If only i could enter bootloader mode i would have tried whichever rom you would have suggested but my problem is different i cant even enter Bootloader mode.
And i think only a service center can help me nothing else.
Hi!
My device as similar behavior.
After a failed upgrade at 99%.
It don't Start , can't go to Boot Loader mode.
When I connect to Windows give me usb not recongnized.
Try to flash with orginal ROM, Even "usb not recognized but it gives a comunication error...
and stop's.
Did you manage to put your device in bootloader mode ?
I try ever possible combination of keys and no luck...
Please help!
paulorosa said:
Hi!
My device as similar behavior.
After a failed upgrade at 99%.
It don't Start , can't go to Boot Loader mode.
When I connect to Windows give me usb not recongnized.
Try to flash with orginal ROM, Even "usb not recognized but it gives a comunication error...
and stop's.
Did you manage to put your device in bootloader mode ?
I try ever possible combination of keys and no luck...
Please help!
Click to expand...
Click to collapse
Hello there...Welcome to the club bro...
Funny thing is i gave my phone to a Local service center and he was able to get it in Bootloader mode but couldnt install a proper ROM as he didnt had one...so i got my problem fixed and i sold my jasjar two days ago for 5000/- Indian Rupees...Thats around $105 .
I have promised myself that i will NEVER buy an Imate as they dont have proper service centers here in my place.I am planning to get Sony X1 now
My suggestion to you...get it repaired and sell it before it gets messed up again.,its a very delicate and very pain in the @$$ phone.Im so happy now ^.^
Mods :Can lock this thread now...i no longer own a jasjar.
How They Get in Bootloader?
Using JTAG ?
Or there is another trick ?
Because Normal combination of key don't work
...
Can you try to find out ?
Thanks
ZODI said:
Hello there...Welcome to the club bro...
Funny thing is i gave my phone to a Local service center and he was able to get it in Bootloader mode but couldnt install a proper ROM as he didnt had one...so i got my problem fixed and i sold my jasjar two days ago for 5000/- Indian Rupees...Thats around $105 .
I have promised myself that i will NEVER buy an Imate as they dont have proper service centers here in my place.I am planning to get Sony X1 now
My suggestion to you...get it repaired and sell it before it gets messed up again.,its a very delicate and very pain in the @$$ phone.Im so happy now ^.^
Mods :Can lock this thread now...i no longer own a jasjar.
__________________
There is no Knowledge that is not Power...
Click to expand...
Click to collapse
How They Get in Bootloader?
Using JTAG ?
Or there is another trick ?
Because Normal combination of key don't work
...
Can you try to find out ?
Thanks
Any updates?
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
mAke sure you have install all LG Software on your computer, like usb driver the important one
then download stock rom for your device
and flash it through KDZ Software update,
Try instaling drivers on some win7 pc/laptop, then try to revive the phone via kdz, because win8 sometimes has problems with drivers etc,
Btw which procedure were you using to change the rom?
Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound
Thank you everybody for your awnsers !
mugen_dz said:
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound
Click to expand...
Click to collapse
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again
Makozak said:
Thank you everybody for your awnsers !
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again
Click to expand...
Click to collapse
Download the stock rom (original) for your phone, must know which version there is a lot of version ( V10C, V10G, V10E ...)
Use Kdz updater, if the App crash check compatibility and choose windows XP, in KDZ updater use the mode 3GQCT and phone mode DIAG, browse for the stock rom in the KDZ FILE and click Launch software update.
When i flashed the stock rom i got the loop, so i tried to hard reset it and it worked for me (power + menu + volume down or up i forgot)
Try to hard reset before flash if it doesn't work, flash it.
Okay Thanx again mate, i'll try it now and tell you
Worked ?
Sent from my HTC Desire S using xda app-developers app
Sorry mate, i was busy all the week, i only had free time today.
Anyway, yes it worked
Thanx a lot !!
You're a life saver
Excellent !
Sent from my HTC Desire S using xda app-developers app
Friends please help .I know im new here but i do everything i could i didnt solve problem.
Im literally crying because of my phone .
Im having rooted LG G2 D802 ,and in the begining phone was working good until i instal flashfly and started this img. openrecovery-twrp-2.6.3.2-g2d802. (was trying to instal it)
After that i got error in left corner while booting (it was saying unsecured ...) , but phone woorked and than i didnt like that so i went in setings , backup and press reset and what happend is that i cant now start my phone further then 1st page of wizzard screen.
I can enter in download mode and i did update firmware to 4.4.2 but nothing happend........ still when i turn it on i dont have home button ,back button ,option button and it always poping up unfortunately the process android process acore has stoped and when i click ok ,
THEN
unfortunately lg keyboard has stopped. ( In wizzard )
If i try to be fast he returnes me from wifi to welcome screen and crash.....
Im desperate and i dont have much money for fixing ,i hardly bought phone ,you are my only hope i dont know what to do.
Phone can not enter in hard reset mode and if i try he restart whole time but it can in download.
PLEASE PLEASE PLEASE.
On the pc im using win7
AND SORRY FOR MY ENGLISH , im trying to type correct as much as i know. Please dont blame me, thanks.
Shooter_SRB said:
Friends please help .I know im new here but i do everything i could i didnt solve problem.
Im literally crying because of my phone .
Im having rooted LG G2 D802 ,and in the begining phone was working good until i instal flashfly and started this img. openrecovery-twrp-2.6.3.2-g2d802. (was trying to instal it)
After that i got error in left corner while booting (it was saying unsecured ...) , but phone woorked and than i didnt like that so i went in setings , backup and press reset and what happend is that i cant now start my phone further then 1st page of wizzard screen.
I can enter in download mode and i did update firmware to 4.4.2 but nothing happend........ still when i turn it on i dont have home button ,back button ,option button and it always poping up unfortunately the process android process acore has stoped and when i click ok ,
THEN
unfortunately lg keyboard has stopped. ( In wizzard )
If i try to be fast he returnes me from wifi to welcome screen and crash.....
Im desperate and i dont have much money for fixing ,i hardly bought phone ,you are my only hope i dont know what to do.
Phone can not enter in hard reset mode and if i try he restart whole time but it can in download.
PLEASE PLEASE PLEASE.
On the pc im using win7
AND SORRY FOR MY ENGLISH , im trying to type correct as much as i know. Please dont blame me, thanks.
Click to expand...
Click to collapse
When you say you upgraded the firmware and nothing happened, what exactly did you do and what steps did you take?
Also, for hard reset did you try vol down + power then vol up + vol down?
Thanks thanks thanks
You solved my problem with your combination for hard reset. I have tryed every combination except that. You are my hero and i love you ,i love you i love you maybe even more than my girfriend now !!! :highfive:
No1 gave me that combination
Art Vanderlay said:
When you say you upgraded the firmware and nothing happened, what exactly did you do and what steps did you take?
Also, for hard reset did you try vol down + power then vol up + vol down?
Click to expand...
Click to collapse
Shooter_SRB said:
You solved my problem with your combination for hard reset. I have tryed every combination except that. You are my hero and i love you ,i love you i love you maybe even more than my girfriend now !!! :highfive:
No1 gave me that combination
Click to expand...
Click to collapse
No worries. Glad I could help
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
something similar happend to me..
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
HyperVenoms said:
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
Click to expand...
Click to collapse
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
No but i found a solution
rxxern said:
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
Click to expand...
Click to collapse
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
#https://docs.google.com/uc?id=0B7pEcClQW-2JenF1cW9jb05OVlk&export=download
thanks enjoy!!
No that lucky
HyperVenoms said:
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
Click to expand...
Click to collapse
So lucky! I can't do that to mine, when I put the battery out and try to do this, my phone has no response. ):
out of options
marwachacha said:
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
thanks enjoy!!
Click to expand...
Click to collapse
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
rxxern said:
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
Click to expand...
Click to collapse
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
marwachacha said:
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
Click to expand...
Click to collapse
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
hmmm
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
HyperVenoms said:
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
Click to expand...
Click to collapse
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
haha ok, i habe no idea what to do wiith your phone try searching other threads maybe ???
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
also in advance try to change the usb cable which you are using to connect (him) with your computer as well as try different Pc's may Be yours might have some usb port drivers corrupted also try to install the ADB interface drivers in your pc so as you can enhance your Pc detect the devices even if they are powered off gues it will work still i have hope with your (him) buddy!!!
Nothing better than xda.
I am having the same problem with my G530BT. Managed to solve ?
rxxern said:
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
I am having the same problem with my G530BT. Managed to solve ?
Raphaelfla said:
I am having the same problem with my G530BT. Managed to solve ?
Click to expand...
Click to collapse
Ow, one year latter I don't think this will help you anymore, but just in case someone has the same question: I didn't solve the problem, I took it to the Samsung assistence and discover that the motherboard was damaged, they would have to replace it.
Hi all,
I've received my S7 Edge today(Exynos), yay.
All was working flawlessly until few moments ago, I was running 3Dmark, and before I even start to bench, while i was downloading the first scene The screen goes all black, then after 10 seconds, there's a message on top (in the same way a rooted phone would display "kernel is not seandroid enforced..."):
Bootloader Exception
[RST_START = 0x100000000 ]
[...]
Exception: do_handler_serror: SERROR(esr: 0xbf00000000)
[...]
I didn't install any rom, root or else, it's pure stock untouched. I tried to reboot phone using volume down+power, it reboots I think (screen goes all black) but quickly the same message appears...
I'm surely going to call phone operator to tell them that phone is KO, but if one of you guys has any idea that would avoid me to send back phone to warranty, it would be nice
Thanks !
@mods : Sorry for posting in wrong section
Try this...
https://www.youtube.com/watch?v=UV0Zp7F1LHs
I'd suggest a factory reset if the above fails.
Hold Power + Volume Up + Menu
Then use the volume keys to scroll to factory reset and select using menu or power buttons.
Hi guys,
Thanks very much for you answers,
Unfortunately any key combination is not working can't get into recovery nor download mode ...
I don't want to try Odin, scared about potential warranty issues ... but it kills me to have to send the phone back to sammy and wait ..
Mr_PoPoP said:
Hi guys,
Thanks very much for you answers,
Unfortunately any key combination is not working can't get into recovery nor download mode ...
I don't want to try Odin, scared about potential warranty issues ... but it kills me to have to send the phone back to sammy and wait ..
Click to expand...
Click to collapse
The phone must be off for the Volume Up + Power + Home button combination to work. Keep those pressed for like 10 seconds, even after the phone powers on. I just tried it on my S7 Edge (which drops every call) and could restore to factory settings (but didn't solve the issue).
Cst79 said:
The phone must be off for the Volume Up + Power + Home button combination to work. Keep those pressed for like 10 seconds, even after the phone powers on. I just tried it on my S7 Edge (which drops every call) and could restore to factory settings (but didn't solve the issue).
Click to expand...
Click to collapse
Thanks for your advices !
Unfortunately, even with this combination and a lot of patience I cannot manage to "bypass" this Bootloader error ...
I'm mad because it will take one month to get a new phone from my operator(just called them ...)
So maybe i'm going to try Odin ... but if I cannot put my phone into download mode, i'm f*ckued, right ?
Here's a photo of the error message :
https://drive.google.com/open?id=0B_3xOO1wyNGMVWl1RUFybTZoM3c
Mr_PoPoP said:
Thanks for your advices !
Unfortunately, even with this combination and a lot of patience I cannot manage to "bypass" this Bootloader error ...
I'm mad because it will take one month to get a new phone from my operator(just called them ...)
So maybe i'm going to try Odin ... but if I cannot put my phone into download mode, i'm f*ckued, right ?
Here's a photo of the error message :
https://drive.google.com/open?id=0B_3xOO1wyNGMVWl1RUFybTZoM3c
Click to expand...
Click to collapse
I'm stumped. I've never seen that before
From where did you order your phone?
thunderroid said:
From where did you order your phone?
Click to expand...
Click to collapse
A french mobile operator , Bouygues Telecom.
Can you do a factory reset from the Settings menu?
thunderroid said:
Can you do a factory reset from the Settings menu?
Click to expand...
Click to collapse
Nope, the phone doesn't boot anymore... it only displays the bootloader error message...
And no possibility to access reboot or recovery...
Maybe I can try to check with ADB, but my problem is that i would need to active USB debugging in settings ... but i can't do that
Return it. Nand flash died.
Sent from my iPad using Tapatalk
Yap, I think you have to return it.
hiepgia said:
Return it. Nand flash died.
Click to expand...
Click to collapse
Yep, I wanted to avoid it, but I don't see other reasonnable option. The phone didn't last more than 24h ... ok, it happens, I know ...
My previous (Still actual (sic)) Phone was a Note 3 and I installed so much roms, soft bricked the device so many times, but I could always restore it ... But not the S7 EDGE ... And I didn't spot any other user with same bootloader issue...
I've just sent back the phone for replacement, Thanks for all who replied to me in this thread
Oh and by the way : don't download 3DMark from play store , it will Hard brick your phone !!! (haha just kidding , i know it's not what caused my phone to die, I'm sure of it , however I won't try to install it anymore i think^^ )
Cheers XDA crew !!
Mine has done just the same. went to bed, woke up this morning and the same message as yourself.
Borgella said:
Mine has done just the same. went to bed, woke up this morning and the same message as yourself.
Click to expand...
Click to collapse
Sorry to hear that bro
Try things to troubleshoot if you wanna, but my advice : don't lose one day of trying to fix it, send it back directly to warranty...
I tried lot of things, key combination to reboot phone in recovery or download, I tried Kies, Odin, ADB....
I believe it's a real samsung bug that will happen to many people, So send it now before sammy is drowned under hard bricked S7 phones and start to have issues to provide replacement devices....
the S7 edge is getting a "urgent" update on approx 3mb..maybe this is a fix of some sort.
johanbiff said:
the S7 edge is getting a "urgent" update on approx 3mb..maybe this is a fix of some sort.
Click to expand...
Click to collapse
That is to correct the Screen Edge sensitivity
For anyone else who runs into this issue, I managed to fix my phone.
Holding the power and VOL down buttons for about 5-10 seconds will reboot the phone; if you hold home at the same time you can get into download mode (might take a couple tries).
From there, you can flash a new bootloader (BL option in odin) and then get back into recovery to do whatever you need to do.
Went from soft-brick to full restore in about ten minutes--not even a factory reset necessary.
Hope this helps!