Related
hi - as many of you will know the xda experiance can be an all consuming task .
i after reading many many posts would like some information on how exactly to get the mtty tool to offer me the option of usb so i can connect to my bricked xda exec.
my bootloader screen is severely distored in colour however i can get back and forth to the promt for "press x or 0 " to reset / exit. it seems this proble m is not unknown however i dont seem to be lucky when it comes to the mtty tool.
any help would be greatly appreciated : thanks in advance.
Did you disable Activesync on your PC first?
Find the (two) executables in taskmanager and end task.
V
True. And make sure you're not running Vista! (bricked my phone for a few days until I could fix that)
snorbaard said:
True. And make sure you're not running Vista! (bricked my phone for a few days until I could fix that)
Click to expand...
Click to collapse
would you share HOW you sorted vista bricking your uni? i've had to send it for repairs because nothing i could do fixed it.
i tried updating the firmware to another of helmi's cooked roms. i've flashed the device many times and used all sorts of people's roms, and i think it was the time i switched to VISTA that bricked it.
My solution
Take the sd card from the phone... duh
It was giving the same error, when i took the card it started to work...
ohmlogic said:
how do i get usb in drop down in mtty tool ?
Click to expand...
Click to collapse
Strange, I never have a problem with the sd card or sim card in the phone
[1]
First make sure active sync is not running, you may have to kill the process wcescomm.exe (CTRL+ALT+DEL, Processes TAB, right click on process and End Process Tree)
[2]
If that doesn't work, change the usb cable, every time i encounter that problem - it is nearly always the usb cable, if you have a canon digital camera, those cable works for me about every time
No man... i've been tryin to get USB in dropdown list but never appears. I'm so tired of incomplete answers. I'm using vista and i kill every process indicated by you.
Did you or did you not post multiple threads on the same problem?
Try this instead of mtty.
http://handheld.softpedia.com/get/System-Utilities/nueTTY-Console-71189.shtml
Its a console that diables everything automatically.
It worked a treat for me. My phone was stuck in bootloader.... no ROM or SPL would flash (stuck at 0%) I couldn't get mtty to give me "USB" from the dropdown in Vista.
I can't get into the boot loader so it says "USB" in the bottom white area... even though USB cable is inserted, of course. If I boot up with device with USB cable inserted the only thing that happens is that the white area is blank. When unplugging the device "Serial" is written, but plugging the USB cable back in doesn't change a ****... stills says "Serial"...
Any clue, USB connector defective? Tried two cables.
nueTTYConsole says the following:
Code:
Disabling RAPI...Already Stopped!
Searching for CE USB devices to connect...
No devices found to connect, aborting...
Not restarting RAPI because it was already disabled.
shadeyhk said:
If that doesn't work, change the usb cable, every time i encounter that problem - it is nearly always the usb cable, if you have a canon digital camera, those cable works for me about every time
Click to expand...
Click to collapse
WOW!! after 2.5 hrs all I had to do is change the cord. hats off for the solution.
Hey, small problem here. I was charging my HD2 earlier today with no problems at all, I flashed the 1.72 stock ROM back onto my phone, and it seemed to be charging fine for a small while after that. But now, after I tried charging my phone, it doesn't seem to recognise there's a USB connection at all. The LED at the speaker-grille isn't doing anything, and the the phone tells me it isn't connected by USB when it's plugged into a computer.
I tried a tonne of things, checked the cable and switched it, soft-reset it, took the battery out, hard reset it, and even blown inside the socket to try and get rid of anything that might be blocking it, but it just isn't showing it's plugged in AT ALL any more... and now the battery is dead, so I can't do anything with it now to try and help it. :/
The only sign I have that the phone realises it has any sort of USB connection, is when I tried to hard reset the device, (I used the hold volUp+volDown+Power method) and it shows the message 'press volUp to hard reset,' usually when I do this, pressing volume up doesn't do anything when the phone is connected by USB for some weird reason - and I have to disconnect USB for the phone to hard reset. I figured this wouldn't happen if the phone doesn't realise it has a USB connection, but when the cable was plugged in, it still wouldn't hard reset until I took it out. So it shows there must be some way the phone knows it's connected.
I'm running the WWE 1.72 ROM with radio 2.10. 50.08_2 if it helps.
Any suggestions?
*Bump*
Sorry for the bump, but it would really help if anyone could help explain this.
I think a bit of trial and error would be best here to establish whats at fault.
phone, cable, or usb port.
-try plugging into a different usb port
-try a different cable (if you have one)
appologies if you have tried these allready.
Tried another cable again just incase, still nothing though. My iPods connected via that USB port I tried using, and that's working fine, so it doesn't seem like that's it, either...
Hi:
I'm having a similar problem. I had plugged in a new retractable usb cable, and when I did, the phone shut off. I rebooted, and tried my original cable, but the phone doesn't charge or sync. I've also tried hard/soft reset, wall charger, usb charger, and none of that seems to work.
Any suggestions?
Thanks.
No idea if this is related or not but my USB connection stopped working after I got the "bttrayce.exe is not a valid pocket pc application" problem (Thanks TomTom! ) so it would appear the USB port has some weird dependencies!
Fixed it by renaming the windows\btsdkce30.dll file (added "[temp]" to the name just in case!) and soft-resetting.
Might be worth a try?
r u using activsync or windows mobile centre ???
USB Issue
I've got exactly the same issue, running HyperROM 3.01.405.T1 and Radio 2.06.51.07.
Suddenly USB isn't working, tried various cables and I suspect it's a software issue somewhere.
Charging isn't a problem at the moment, I have a charging station (ebay from Hong Kong) so I can access the phone and try and resovle this.
I'm going to go back to the stock rom (I assume I'll find that somewhere on XDA) and upddate the Radio version and see if that sorts it.
If anyone has worked out what's casuing this generally let me know as I can imagine this will take a lot of trial and error to solve!
Thanks
have you fixed it?
i am having a similar issue:
I have recently updated my HTC HD2 rom to version 3.14.410.2.
After that i have installed tomtom navigator, but when i turn on the device it returned a message 'BTTRAYCE' is not a valid Pocket PC application'.
I looked at the forums and it was recommended to delete files Windows\BtSdkCE30.dll and
\Windows\BtCoreIf.dll, so i did.
Unfortunately my usb connection is now not working, and i think it could be related to the deletion of those 2 files.
I made a hard reset, but the problem still persists.
can anyone help me please?
My problem solved
Hi i got the same problem , i use ARTEMIS 48 rom 3.14. so my phone suddenly droped to the ground last night but i was charging after that .... next days morning i wanted to connect it to my pc via activesync but it dose not connect .... even disk drive did not work and i could not charge it via AC CHARGER and PC , i toyed around with it here is what i did
1- tried on another pc (result wass the same it did not worked)
2-i hard reseted it (result = the problem was not solved )
3-i went to setting>>>>system>>>power>>>battery and unchecked the option "when phone is on , do not charge ...."
4- i connected it to pc it was not recognozed by pc but it was charging !!!!!!
5-after that i connected it to AC ADAPTOR and it was charging !!!!!!
6- i decided to flash my rom and do a HSPL so my phone will not brick so i connected it to activesync via bluetooth and it was as sucess
7-mean while i was searching this forums
8- i checked my SPL ver
9- i soft-reset and stuning it was recognized by pc and everything was back to normal
in my XP i think it was due to BAD ASS ANDROID ROM and some custom roms bugs....
fpcraveiro said:
have you fixed it?
i am having a similar issue:
I have recently updated my HTC HD2 rom to version 3.14.410.2.
After that i have installed tomtom navigator, but when i turn on the device it returned a message 'BTTRAYCE' is not a valid Pocket PC application'.
I looked at the forums and it was recommended to delete files Windows\BtSdkCE30.dll and
\Windows\BtCoreIf.dll, so i did.
Unfortunately my usb connection is now not working, and i think it could be related to the deletion of those 2 files.
I made a hard reset, but the problem still persists.
can anyone help me please?
Click to expand...
Click to collapse
Uninstall TomTom and the problem goes away.
You can download versions on TomTom Navigator 7 with the Bluetooth files removed - like * HERE *
I don't have an OS installed...
This is due to aMAGLDR being installed and when I had the device open.. I created a 'temp' folder and my next task was to create a 'create_to_sd_root', well I renamed the temp folder to that... bad move? I think so. My system acknowledges the device, however I'm unable to access it. I.e. my computer(no icon), windows mobile center(not connected), etc. Please help! I need my phone!
MrHellas said:
This is due to aMAGLDR being installed and when I had the device open.. I created a 'temp' folder and my next task was to create a 'create_to_sd_root', well I renamed the temp folder to that... bad move? I think so. My system acknowledges the device, however I'm unable to access it. I.e. my computer(no icon), windows mobile center(not connected), etc. Please help! I need my phone!
Click to expand...
Click to collapse
I you were trying to flash Android you just need to flash Clock Work Mod (CWM) and then place the .zip file for the Android ROM on your SD card and use CWM to flash the Android ROM. It is links to Youtube videos in the OP of the thread showing you how to flash CWM and the ROM.
Are you could flash back to Win MO through USB and bootloader or SD card and bootloaderr.. If you go for USB and bootloader make sure you see USB in the white bar of bootloader befor tryng to flash the ROM. Also thew SD card metrhod will remove HSPL if you use a Official and not a custom ROM.
Well I've figured out how to get the android os on there, however I'm unable to locate the drivers for AD8? I'm still unsure about what folder/files need to be on my microSD if I'm running the Desire HD Froyo(current) I cannot access any internal/external(microSD). Help?
MrHellas said:
Well I've figured out how to get the android os on there, however I'm unable to locate the drivers for AD8? I'm still unsure about what folder/files need to be on my microSD if I'm running the Desire HD Froyo(current) I cannot access any internal/external(microSD). Help?
Click to expand...
Click to collapse
You have to use MAGLDR's mass storage option to get access to your SD card, or use the mount storage option in Clock Work Mod. I recomemd usingvthecnass storagecin MAGLDR though as I have had trouble gettingvthecdrivers for mount storage in CWM to install but have never had a problem with the mass storage option in MAGLDR.
T-Macgnolia said:
You have to use MAGLDR's mass storage option to get access to your SD card, or use the mount storage option in Clock Work Mod. I recomemd usingvthecnass storagecin MAGLDR though as I have had trouble gettingvthecdrivers for mount storage in CWM to install but have never had a problem with the mass storage option in MAGLDR.
Click to expand...
Click to collapse
How do I get back the loader without booting up? Obviously haven't been able to copy the rar files. Could this be why my GPS and other functions could not be working properly?
imanh said:
3-i went to setting>>>>system>>>power>>>battery and unchecked the option "when phone is on , do not charge ...."
Click to expand...
Click to collapse
Thanks this sorted my problem!
imanh said:
Hi i got the same problem , i use ARTEMIS 48 rom 3.14. so my phone suddenly droped to the ground last night but i was charging after that .... next days morning i wanted to connect it to my pc via activesync but it dose not connect .... even disk drive did not work and i could not charge it via AC CHARGER and PC , i toyed around with it here is what i did
1- tried on another pc (result wass the same it did not worked)
2-i hard reseted it (result = the problem was not solved )
3-i went to setting>>>>system>>>power>>>battery and unchecked the option "when phone is on , do not charge ...."
4- i connected it to pc it was not recognozed by pc but it was charging !!!!!!
5-after that i connected it to AC ADAPTOR and it was charging !!!!!!
6- i decided to flash my rom and do a HSPL so my phone will not brick so i connected it to activesync via bluetooth and it was as sucess
7-mean while i was searching this forums
8- i checked my SPL ver
9- i soft-reset and stuning it was recognized by pc and everything was back to normal
in my XP i think it was due to BAD ASS ANDROID ROM and some custom roms bugs....
Click to expand...
Click to collapse
I did the same but no work. I have issue #USB not recognized# after installed Android Transformer SD ver.
In three color screen I have USB connection working fine. I could install HSPL4, update Radio, but Win 6.5 has a USB problem.
I don't think this is a hardware issue or I am wrong?
Still confused. Should I take my phone to service?
Hi,
I have the similar problem with my hd2, but worse. Out of 3 different comouters I tried none can see the phone connected and gives me the error saying one of the USB device connected to this computer has malfunctioned and cannot be recognized. I have tried two different cables. I cannot connect my phone through latest magldr using USB flasher or USB mass storage modes. Moreover, when I connect my phone in rainbow screen (hspl screen where you install magldr), it should change to USB from serial but even that does not happen. ANy solutions?? I think its my phone.... Is there any way to revert this back to normal. I don't want a brick.
mcdoc said:
I did the same but no work. I have issue #USB not recognized# after installed Android Transformer SD ver.
In three color screen I have USB connection working fine. I could install HSPL4, update Radio, but Win 6.5 has a USB problem.
I don't think this is a hardware issue or I am wrong?
Still confused. Should I take my phone to service?
Click to expand...
Click to collapse
Your USB drivers for the defualt bootloader (multicolor screen) seem to be working fine, so no you do not have a hardware problem. You might want to uninstall Windows Mobile Device Center or Active Sync, which ever one your computer uses. Then re install it. Also go to device manager in your comtrol panel while you have hour HD2 booted up and connected via USB and clck on update drivers for hour phone, it should be listed in device manager.
kushki said:
Hi,
I have the similar problem with my hd2, but worse. Out of 3 different comouters I tried none can see the phone connected and gives me the error saying one of the USB device connected to this computer has malfunctioned and cannot be recognized. I have tried two different cables. I cannot connect my phone through latest magldr using USB flasher or USB mass storage modes. Moreover, when I connect my phone in rainbow screen (hspl screen where you install magldr), it should change to USB from serial but even that does not happen. ANy solutions?? I think its my phone.... Is there any way to revert this back to normal. I don't want a brick.
Click to expand...
Click to collapse
When you say your Serial in boorloader does not change to USB this tells me you are having driver issues or hardware issues with your micro USB port on your HD2. My bet is it is just driver issues. I sugest you uninstall and rei nstall Wimdows Mobile Device Center or Active Sync which ever one your computer uses. These programs contain the USB drivers for the HD2 and MAGLDR partialy relies on those drivers to. So maybe that will solve your problem.
Recently my hd2 stopped charging so i bought an mains charger for it but now the usb is not regogninzing whenever i connect it nothing comes up on the phone nor the pc is there a way to upgrade the device without connecting it to the pc
regards
you can flash via sd card if that is what you mean. But you should probably send your phone in for service as the usb port is shot.
ah i see could you point me to any tutorials on how i can do it with the sd card and how much would htc charge to fix the usb?
Nev2star said:
ah i see could you point me to any tutorials on how i can do it with the sd card and how much would htc charge to fix the usb?
Click to expand...
Click to collapse
chances are, all the hd2's come with a 1year warranty. You don't have to be the original owner to have it fixed. Call the htc for your country.
For flashing ROMs:
http://forum.xda-developers.com/showthread.php?t=609477
hey thanks alot for your help im going to try and flash artemis rom and if there is still a usb problem im going to phone up htc
and thanks alot mate i would have been stuck without you
hey i have a problem when trying to flash the artemis rom using the micro sd its stuck on the loading screen what should i do
bump............
Did you resolve this problem. I have the same issue. USB only works to charge now. Have tried Hard reset, changing Active Sync options. It just doesn't seem to be detected by windows at all. I have tried numerous cables.
b j p said:
Did you resolve this problem. I have the same issue. USB only works to charge now. Have tried Hard reset, changing Active Sync options. It just doesn't seem to be detected by windows at all. I have tried numerous cables.
Click to expand...
Click to collapse
y have same problem, only charge, whats could be happend?
Did you find a solution to this problem? Im also having this issue
Computer not detecting for cell SD card files?
Hello everybody,
I have a refurbished HTC HD2 (sent to me by HTC) that is stuck on a white screen. However, I can get it to a green, blue red and white screen by holding down the volume button and turning it on. I haven't installed anything except a twitter application 2 weeks ago. I was on an interview for a internship and my phone all of the sudden made a loud noise and the screen when black. When I reset it, the screen turned white. Did I brick it? Is there anyway to make my phone work? I am so scared!
candrade511 said:
Hello everybody,
I have a refurbished HTC HD2 (sent to me by HTC) that is stuck on a white screen. However, I can get it to a green, blue red and white screen by holding down the volume button and turning it on. I haven't installed anything except a twitter application 2 weeks ago. I was on an interview for a internship and my phone all of the sudden made a loud noise and the screen when black. When I reset it, the screen turned white. Did I brick it? Is there anyway to make my phone work? I am so scared!
Click to expand...
Click to collapse
Hi,
If you can get the tri-color bootloader screen,it is not bricked.
From there you can start to re-install everything.
I hope you made frequent back ups,because you may not be able to retrieve your data.
Hi candrade,
I'm in the same situation as you matey - take a look at this thread and see if it can help you in any way:
White Screen of Death - Is There a Solution?
I also get a blank white screen. I can enter Bootloader mode but when I connect the device to my PC via USB, the word 'Serial' at the bottom of the screen doesn't change to 'USB'. I've also tried both soft and hard resets, with no luck.
Best of luck trying to resolve the issue. If you do manage to make any progress then please post it on here.
Archey* said:
Hi candrade,
I'm in the same situation as you matey - take a look at this thread and see if it can help you in any way:
White Screen of Death - Is There a Solution?
I also get a blank white screen. I can enter Bootloader mode but when I connect the device to my PC via USB, the word 'Serial' at the bottom of the screen doesn't change to 'USB'. I've also tried both soft and hard resets, with no luck.
Best of luck trying to resolve the issue. If you do manage to make any progress then please post it on here.
Click to expand...
Click to collapse
malybru I am truly grateful for your advice. You put my mind at ease. Where do I get the programs to reinstall on my HTC? Is it a rom? I cannot thank you enough!
Archey, good luck to you as well! I will keep you posted!
Archey* said:
Hi candrade,
I'm in the same situation as you matey - take a look at this thread and see if it can help you in any way:
White Screen of Death - Is There a Solution?
I also get a blank white screen. I can enter Bootloader mode but when I connect the device to my PC via USB, the word 'Serial' at the bottom of the screen doesn't change to 'USB'. I've also tried both soft and hard resets, with no luck.
Best of luck trying to resolve the issue. If you do manage to make any progress then please post it on here.
Click to expand...
Click to collapse
Hi,
If your serial is not changing to usb,maybe your pc/laptop is lacking the correct drivers.
Use ActiveSync for XP and WMDC for Windows 7.
malybru said:
Hi,
If your serial is not changing to usb,maybe your pc/laptop is lacking the correct drivers.
Use ActiveSync for XP and WMDC for Windows 7.
Click to expand...
Click to collapse
You only need the Activesync/WMDC drivers if the phone is fully booted up into WinMo. It is completely different drivers when connected in Bootloader Mode. Even with no drivers installed the 'Serial' will change to 'USB' just be the very nature of initiating the communication with the PC.
fred_up said:
You only need the Activesync/WMDC drivers if the phone is fully booted up into WinMo. It is completely different drivers when connected in Bootloader Mode. Even with no drivers installed the 'Serial' will change to 'USB' just be the very nature of initiating the communication with the PC.
Click to expand...
Click to collapse
Ok,
So could you please explain why Archey*'s phone doesn't change form serial to usb?
malybru said:
Ok,
So could you please explain why Archey*'s phone doesn't change form serial to usb?
Click to expand...
Click to collapse
In order of known problems:
USB cable either not a data cable (only a power cable) or faulty - solution try another cable.
Front USB Connectors on PCs - solution, try the rear USB connector or if possible another PC.
Faulty USB on the the phone - I had the same problem with an HTC Diamond.
Corrupted Bootloader, thus the phone won't communicate with its internal USB controller.
I am still having trouble
How do you do it exactly? I'm sorry phones/computers is not my thing.
Also, are there any atlernatives to using activesync/WMDC? So sorry for all the questions!
candrade511 said:
I am still having trouble
How do you do it exactly? I'm sorry phones/computers is not my thing.
Also, are there any atlernatives to using activesync/WMDC? So sorry for all the questions!
Click to expand...
Click to collapse
Hi,
You only have to install them on your pc/laptop.
candrade511 said:
I am still having trouble
How do you do it exactly? I'm sorry phones/computers is not my thing.
Also, are there any atlernatives to using activesync/WMDC? So sorry for all the questions!
Click to expand...
Click to collapse
You don't need Activesync or WMDC if you connect the phone to the computer in Bootloader Mode.
The easiest method is to download the ROM from HTC's website (this guarantees that you are getting the correct ROM for your phone). Rename the .exe file to .zip, then extract the .nbh file. Rename that .nbh file to LEOIMG.nbh
Copy that file to the root of a FAT32 formatted microSD Card (less than 8GB in size).
Place the SD Card in the HD2.
Put the phone into Bootloader mode. It will then pick up the ROM and install it.
Oh no so this won't work with a Scan Disk 16 gb I take it? And do I put the scan disk into the computer downloading the rom?
And bootloader mode is the multicolored screen correct?
Sorry, totally computer/phone illiterate!
THANKS SO MUCH!
candrade511 said:
Oh no so this won't work with a Scan Disk 16 gb I take it? And do I put the scan disk into the computer downloading the rom?
And bootloader mode is the multicolored screen correct?
Sorry, totally computer/phone illiterate!
THANKS SO MUCH!
Click to expand...
Click to collapse
Yes, Bootloader is the muulticoloured screen.
You can buy or borrow a 1 or 2GB microSD Card with a either a USB adaptor or micro to SD adaptor and SD to USB adaptor. Most laptops and lots of desktops come with built-in SD Card readers.
Did your HD2 not come with a 2GB SD Card?
Of course not :/ came with a really small 16gb ...I'll have to buy it from like Best buy or something?
Just bought a used HD2 (TMOUS). I checked the bootloader and it already had HSPL installed. However, I wanted to flash stock ROM and do task29 prior to installing HSPL again myself.
I flashed the stock ROM v3.14.531.1 via microSD card method. Then I tried to run task29 and it failed. Bootloader wouldn't detected the USB connection. I also try to install HSPL but it doesn't work. I get an error: USB COnnect Failed!
When I connect to PC or wall charger, the phone charges perfectly fine. I even see the icon that says its connected.
When I am on the bootloader and connect the phone to my PC via USB, the white background area says "Serial" and it doesn't change to "USB".
I tried using different USB cables and also different PC, but still no luck.
What is wrong? Why can't I connect via USB? Help please.
Have you tried droidexployer? Doubt that'll work but worth a shot. What might be wrong is you don't have the proper drivers installed.
Sent from my Desire HD-2 using XDA App
htccraze said:
Have you tried droidexployer? Doubt that'll work but worth a shot. What might be wrong is you don't have the proper drivers installed.
Sent from my Desire HD-2 using XDA App
Click to expand...
Click to collapse
Droidexployer is for devices running rooted android. mine is still stuck on windows, i can't install hspl in order to run android...
i am sure its not a driver problem because i have another hd2 which connects perfectly fine.
Have you tried it on a different usb port on the pc? Sometimes one will work while another won't for some reason. Also remember to check the options in ActiveSync or WMDC to ensure usb connections are allowed, seems a stupid mistake, but one I have made myself before. If all that fails, maybe try on a different pc or with a different usb cable. Sorry for the super simple answers, I see you're not a brand new user, but its often these simple little things that hang us up
Change the battery
Change the battery ?
I seen your comment that said you already had hspl so I just assumed it was on android, sorry. Yea the different usb ports is a great idea if it wasn't for the fact that you even tried it on a different computer as well. Since you said you bought it used would you mind saying where from? I've known people who have problems with they're phone & can't find out how to fix it so they try and sell it on ebay. If you did get it from there the best thing to do is contact the seller and explain your problem. Ask if it had this problem before and say you don't want this phone if it's not repairable. With ebay you only have a short time to file a complaint if it leads to that.
Sent from my Desire HD using XDA App
another "simple" thing..
check for dirt or fluff in usb port
same here but I have EU version of HTC HD2...
also i Have MIUI 1.8.5. Gibgerbread 2.3.5 and same thing with bootloader...when start phone everything works fine !!!
If you find any solutions please write it to me so i can solve problem! Thanks
Are you able to charge the phone? if not, it's possible the microusb port is broken.
yes able to charge phone....i think its manufacture something cause tryed to connect to other PC with other USB and still same prob.
sportman123 said:
yes able to charge phone....i think its manufacture something cause tryed to connect to other PC with other USB and still same prob.
Click to expand...
Click to collapse
Have you installed windows mobile device center?
I am having the same issue. It worked a couple weeks ago. Now I can not get USB connection in MAGLDR or Bootloader...
Any help?
Yeah, me too.
Get your self a new sparkly xoom and wanna put android on my hd2. Oh well no mobile internet for my xoom. Unless any one knows of any wm6.5 app/prog that'll do it?
Arty U.K.