Database Users

Need help

I have a ogange SPV M3100, when i torn it on i se 4 stripes, red, green, blue and white stripes. on red i se text :
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
What i need to do?
Can some one help me?
Sory for my english!

That is the bootloader screen. Just soft reset the device with the stylus and it should boot up normally, if the device is OK. If you are not sure how to softreset, check the WIKI here:
http://wiki.xda-developers.com/
If it doesn't go past there, there is still hope. Read the info in the WIKI on how to unbrick your phone. Based on the SPL version that is on the phone, someone has already been playing around with loading roms, as that is not a factory standard SPL. Much better, but not factory version.
Reply back with your findings after the soft reset.

Nothing hapans, its stil the same, screan with 4 colors.
I tryed hard reset an soft, but nothing.
How to instal a new rom?

OK, a couple of questions.
1. do you have the usb cable to connect your device to a pc.
2, do you have access to a pc with activesync installed that has usb ports.
3. do you have a micro sd card and a device that can write to that card.
Your answers to these questions will determine the path we need to take for upgrading.
Will try to respond as soon as I see your posting.

Steve Sharp said:
OK, a couple of questions.
1. do you have the usb cable to connect your device to a pc.
2, do you have access to a pc with activesync installed that has usb ports.
3.
,0
Your answers to these questions will determine the path we need to take for upgrading.
Will try to respond as soon as I see your posting.
Click to expand...
Click to collapse
At firs i flashed my m3100, pocket pc is working, but as a phone it dont works, phone is swichin off him self.
1. Yes, i have a cable
2. Yes, i have access to a pc with activesync installed that has usb ports. But it is not connecting to a activesync.
3. Yes, i have a micro sd card and a device that can write to that card.
I flashed my device with micro SD card!
I think the phone is broken.

steks84 said:
At firs i flashed my m3100, pocket pc is working, but as a phone it dont works, phone is swichin off him self.
Click to expand...
Click to collapse
so that it all clear, do you mean to say that you m3100 boots up fine, but you cant make calls?
or
your m3100 keeps resetting itself
or
basically, what exactly do you mean by pocket pc work but phone dont work.
anyways, just reflash using your microsd again, and you *should* be fine

XtreMe_G said:
so that it all clear, do you mean to say that you m3100 boots up fine, but you cant make calls?
or
your m3100 keeps resetting itself
or
basically, what exactly do you mean by pocket pc work but phone dont work.
anyways, just reflash using your microsd again, and you *should* be fine
Click to expand...
Click to collapse
At first, hi don not offer me to write in may sim pin code, then hangs on and shows white screan, then phone buton dont works and hang down buton too.
I have flashed my M3100 several times an several rom versions, but the same!

you can try reflashing your radio, or checking your device for bad blocks with mtty
edit:
just saw this link over at the upgrading subforum
http://forum.xda-developers.com/showthread.php?t=377389
just exactly what you need for checking bad blocks

Ok, i will try to check for bad blocks, and let you know about situation.
Can someone give me a link for radio files?

Dude, try the wiki : radio roms....

Frozen on blue 'Windows Mobile' screen

Hi,
I've been reading through these forums and am getting very lost as to what to do.
I have the Orange SPV M3100 and it won't boot into windows. On switching it on, it does the orange bit: at the bottom - "m05 s04 b06 d1.23" and 'No GSM' flashes up briefly before the freeze on 'Windows Mobile' loading screen.
On pressing 'Ok' and power button together with a soft reset, I get to the tri-colour screen and it says "HERM100", "IPL-1.01", "HERM100", "SPL-1.04", and either "USB" or "Serial" depending on whether or not it's USB'd to a PC port.
I've tried the master reset - top two buttons and a soft reset, followed by 'R' to confirm a full reset. It immediately said 'done' or something to that effect, but still freezes on 'Windows Mobile'.
All the help threads here seem to indicate that I need to have this phone running with Active Sync on the PC to transfer files to it in order to refresh the ROM but Windows [XP] can't see the phone because it's not finished booting.
Please please please can someone give me a nudge in the right direction?
Many thanks
Dave

as you said ok and power together with soft reset action brings you tri colour screen. At that stage you plug in to active sync (4.5) and ensure you have .net framework installed on your PC.
with the tricolour screen, plug PC to phone and run the exe file from one of these ship ROM http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
you should then be able to get an OS back to your phone. Then get this one on to your phone
http://forum.xda-developers.com/showthread.php?t=296722
after that you can flash what ever rom you like make sure you follow the dr's suggestions here. http://forum.xda-developers.com/showpost.php?p=1990320&postcount=6
other than that, http://forum.xda-developers.com/showthread.php?t=299462 this thread is the only one I had to go on with the first time I played with my hermes.

zocster said:
as you said ok and power together with soft reset action brings you tri colour screen. At that stage you plug in to active sync (4.5) and ensure you have .net framework installed on your PC.
with the tricolour screen, plug PC to phone and run the exe file from one of these ship ROM http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
you should then be able to get an OS back to your phone. Then get this one on to your phone
http://forum.xda-developers.com/showthread.php?t=296722
after that you can flash what ever rom you like make sure you follow the dr's suggestions here. http://forum.xda-developers.com/showpost.php?p=1990320&postcount=6
other than that, http://forum.xda-developers.com/showthread.php?t=299462 this thread is the only one I had to go on with the first time I played with my hermes.
Click to expand...
Click to collapse
Will this remove all data from the phone, like contacts, settings?
If so, is there a way retrieve them before reinstalling OS?
Thank you.

[email protected] said:
Will this remove all data from the phone, like contacts, settings?
If so, is there a way retrieve them before reinstalling OS?
Thank you.
Click to expand...
Click to collapse
Well if your phone is semi dead, you can't really retrieve any data other than the ones on the SD card.

zocster said:
Well if your phone is semi dead, you can't really retrieve any data other than the ones on the SD card.
Click to expand...
Click to collapse
What is "semi dead"?
In my case it frozen at windows mobile screen, before it gets the animated "busy" square at the center...any hope?

[email protected] said:
What is "semi dead"?
In my case it frozen at windows mobile screen, before it gets the animated "busy" square at the center...any hope?
Click to expand...
Click to collapse
Well if you can't soft reset successfully then it is semi dead, you have to re flash

zocster said:
as you said ok and power together with soft reset action brings you tri colour screen. At that stage you plug in to active sync (4.5) and ensure you have .net framework installed on your PC.
with the tricolour screen, plug PC to phone and run the exe file from one of these ship ROM http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
you should then be able to get an OS back to your phone. Then get this one on to your phone
#######################################
Hi there, well, I'm back after months of forgetting about this but still hoping to get it to work. Thanks for the above reply, but that method of putting software on still relies on getting activesync to communicate with the mobile phone via the usb cable - my phone doesn't. windows sees that I've connected a usb device but active sync gives up trying to talk to it... any further ideas greatly appreciated...
Best regards
Dave
Click to expand...
Click to collapse

$100 Reward if can fix my T8285

Long story short my phone worked fine for months. Went to a 1.56 Rom active sync stopped working. I have already tried everything associated with AS problem, everything. Went to get it repaired at HTC America in Houston, TX there gay and dont support T8285. I have tried flashing via memory card but I seem to be retarded doing it that way. Engineer said mini usb slot works fine, cooked rom may have corrupted AS. Customer service would not let him fix my phone because it was an "aussie version". I just want the phone to sync is that too much to ask? Anyway $100 bucks to anyone that can make it work paid via paypal immediately.

moved out of development

Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature

Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!

Thanks to both of you guys for your suggestions. I thought I was not a noob when it came to flashing roms but once I could not do it via usb I was a whole different story. Yeah I am offering the $100 just to get people to help. I know you get slammed if you ask a question so I figured I would make it worth someone's time. I am going right now to pick it up from the repair center so I will try during my lunch in about an hour.

Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
Click to expand...
Click to collapse
I tried uninstalling and reinstalling active sync. Different cables, different computers, xp and vista, everything, checked usb enhanced, etc ,etc.

bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
Thanks for breaking it down barney style for me. I will try this very soon. If it works my friend you got $100 smackers.

no worries, Glad to help (if it does lol)

bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
So I got my phone and this is what it says.
BLAC120 32M
SPL-1.56.01Olinex
MicroP-Blackstone (LED) v6
and it's just red green blue and white no word on the bottom. Ran BlackstoneRUUWrapper with the nbh file that I wanted and it gave me a connection error. Now it says Seiral in the white.

Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature
Click to expand...
Click to collapse
Well I get it into bootloader no problem but then plug in the usb cable and nada, it says serial. So then I tried starting bootloader mode with the cabe and still nada, it does not even say serial. If I unplug it then it says serial. I have tried both ways to run the RUU Wrapper and I keep getting the usb conncetion error

serial?
Hi, please can you post a screen shot of where it says serial at boot screen?

stoolzo said:
Hi, please can you post a screen shot of where it says serial at boot screen?
Click to expand...
Click to collapse
I cant because I cant use my software that would do that since it wont sync to my computer.

snap shot
just take a snap shot with a webcam or digital camera if you have one.

stoolzo said:
just take a snap shot with a webcam or digital camera if you have one.
Click to expand...
Click to collapse
let me see if this comes thru ok.

turcomora said:
let me see if this comes thru ok.
Click to expand...
Click to collapse
Here yo go. This picture is with me having the device plugged in it charging fine. Then entering bootloader mode. If I unplug then it will say serial. If I dont plug in before then enter bootloader it will say serial still.

thanks
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?

stoolzo said:
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?
Click to expand...
Click to collapse
Only thing I was not doing was taking out the battery. Just tried that and still same screen. Nothing happens when I press the volume up button just stays there.

pc
do you have another pc to try this on to rule out an actual active sync problem?

stoolzo said:
do you have another pc to try this on to rule out an actual active sync problem?
Click to expand...
Click to collapse
Yeah I have been trying on my latop, home pc, and work pc and nothing same result. I have tried different usb cables, os, reinstalling, everything. Only thing I have not tried is flashing via sd card yet.

brick
its sounds like you have a corrupt spl, it is definately worth trying the sd card as it may allow you to activesync but it may then fallover when it reboots and goes into boot mode. This i where user viperbjk (see android dev thread) may be able to help as he has successfully managed to unbrick a phone.
I had this same problem but powering down and simply triggering the and spl reflash resolved it. your problem sounds different though.

Is there something I can Do?

A seconed b4 my Athena will found her way to the bin.
I gave My Athena to a lab, the made things worst....
My Athena Just display the 3 color screen
and after a while black screen charge a bit and then again 3 color screen.
If I plug it to USB it change from Serial To USB .
cannot sync it with microsft sync.
thank you

adleron said:
A seconed b4 my Athena will found her way to the bin.
I gave My Athena to a lab, the made things worst....
My Athena Just display the 3 color screen
and after a while black screen charge a bit and then again 3 color screen.
If I plug it to USB it change from Serial To USB .
cannot sync it with microsft sync.
thank you
Click to expand...
Click to collapse
first of all try removing the sim and sd card and do a hard reset by I think powering on with the volume down button held in
if this doesnt work tell me what the writing says in the 3 coloured screen
Good Luck

HI
It going in a loop
when display is says:
IPL-V1.00
Spl-1V1.2 olipro
USB\Serial

adleron said:
It going in a loop
when display is says:
IPL-V1.00
Spl-1V1.2 olipro
USB\Serial
Click to expand...
Click to collapse
Good news.
you can fix this easily
download an SPL 1.2 rom from here
http://forum.xda-developers.com/showthread.php?t=397518
remove sd and sim card , put the phone in bootloader by holding the camera button in and resetting(press the recessed button on the bottom of the phone.)
now connect the phone to usb port and run the upgrade program you downloaded.
Because your phone has been unlocked(spl 1.2) you can flash any SP 1.2 rom
The cause of this problem is you corrupted therom image on the phone, possibly by installing a rom with the wrong spl
Good luck and let me know how you went

Hi
The machine Won't pass the 1%
and it bsod .
then restart
The Htc not recornize by Microsoft ActiveSync

adleron said:
The machine Won't pass the 1%
and it bsod .
then restart
The Htc not recornize by Microsoft ActiveSync
Click to expand...
Click to collapse
try using the sd card method with a rom I suggested
read the wiki about this
Iirc you rename the nbh to atheimg.nbh and put it on the sd card then put the sd card in the phone and reset while pressing the camera button

please help

i break my usb so I take phone to shop for fix after a week I got the phone back. and now when connected to any pc 'usb not recognized' I try update drivers bat nothing hapen .....anybody can help????

take it back to the shop and complain. maybe they cross soldered some usb pins, so the cable only charges, not carries data.

I gave him a fix again and after a week he called me that he can not fix... can I instal new rom without connecting with pc??? thanks

Flash from sd card.
trengy said:
I gave him a fix again and after a week he called me that he can not fix... can I instal new rom without connecting with pc??? thanks
Click to expand...
Click to collapse
You can flash via your sd card. Go to here to read up on how to do this and all the REQUIRED STEPS to do so.

wild
does it still charge from the usb port

I'm using android nand rom

how I can instal nand rom without connect with computer ?????
please help (((

I would try another USB cable or even simply another USB plug on my PC.
Or, to make sure it´s not my PC, try it with another PC.

trengy said:
how I can instal nand rom without connect with computer ?????
please help (((
Click to expand...
Click to collapse
You cant unless you..
a) Want WM6.5
b) Have CWR already flashed (For Android)
If your USB is broken you will need to get it fixed or get a new HD2.

usb is broken and nobody cant fix does not make sense to replace the usb cabel or tried another computer

I have installed MDJs_CyanogenMod7 nand rom.... so is no change to instal rom from sd without CWRecovery???

trengy said:
I have installed MDJs_CyanogenMod7 nand rom.... so is no change to instal rom from sd without CWRecovery???
Click to expand...
Click to collapse
No, not unless you want to put WM6.5 back on.

so how I can put wm 6.5 ???

trengy said:
so how I can put wm 6.5 ???
Click to expand...
Click to collapse
Go into bootloader (turn of the phone, press the vol down button and press the power on button at the same time, wait until four color screen appear and see at the white color part the text "Serial". Plug in to your PC and wait until the "Serial" changes to "USB". Now you can flash it with winmo
Goodluck

Thanks for your answer but I knew how to flash rom with computer without you help .... you should read the other coments...
I have broken usb

You will need to place leo.image onto microsim assuming you have card reader which you will need since your usb is dead.
Then hold volume up and down whilst briefly pressing power on button. Then boot up from microsim which has leo image on it.
Do a search here on xda forums. Lots of posts on this form of rebooting..
Good luck..

xlr8me said:
You will need to place leo.image onto microsim assuming you have card reader which you will need since your usb is dead.
Then hold volume up and down whilst briefly pressing power on button. Then boot up from microsim which has leo image on it.
Do a search here on xda forums. Lots of posts on this form of rebooting..
Good luck..
Click to expand...
Click to collapse
What the hell are you talking about??
a) its leoimg.nbh not "leo.image"
b) Its MicroSD not "microsim"
c) You dont hold volume up "and" down, you JUST hold volume "down".
d) You dont boot "from" the image you flash using it.
People like you just confuse n00bs more.