A seconed b4 my Athena will found her way to the bin.
I gave My Athena to a lab, the made things worst....
My Athena Just display the 3 color screen
and after a while black screen charge a bit and then again 3 color screen.
If I plug it to USB it change from Serial To USB .
cannot sync it with microsft sync.
thank you
adleron said:
A seconed b4 my Athena will found her way to the bin.
I gave My Athena to a lab, the made things worst....
My Athena Just display the 3 color screen
and after a while black screen charge a bit and then again 3 color screen.
If I plug it to USB it change from Serial To USB .
cannot sync it with microsft sync.
thank you
Click to expand...
Click to collapse
first of all try removing the sim and sd card and do a hard reset by I think powering on with the volume down button held in
if this doesnt work tell me what the writing says in the 3 coloured screen
Good Luck
HI
It going in a loop
when display is says:
IPL-V1.00
Spl-1V1.2 olipro
USB\Serial
adleron said:
It going in a loop
when display is says:
IPL-V1.00
Spl-1V1.2 olipro
USB\Serial
Click to expand...
Click to collapse
Good news.
you can fix this easily
download an SPL 1.2 rom from here
http://forum.xda-developers.com/showthread.php?t=397518
remove sd and sim card , put the phone in bootloader by holding the camera button in and resetting(press the recessed button on the bottom of the phone.)
now connect the phone to usb port and run the upgrade program you downloaded.
Because your phone has been unlocked(spl 1.2) you can flash any SP 1.2 rom
The cause of this problem is you corrupted therom image on the phone, possibly by installing a rom with the wrong spl
Good luck and let me know how you went
Hi
The machine Won't pass the 1%
and it bsod .
then restart
The Htc not recornize by Microsoft ActiveSync
adleron said:
The machine Won't pass the 1%
and it bsod .
then restart
The Htc not recornize by Microsoft ActiveSync
Click to expand...
Click to collapse
try using the sd card method with a rom I suggested
read the wiki about this
Iirc you rename the nbh to atheimg.nbh and put it on the sd card then put the sd card in the phone and reset while pressing the camera button
Related
i have a m600 its about 3 month old, just done a factory hard reset after having many problems getting it to stay on, after about a hour of ****ing about with the mains charger it decided to turn on, however just kept on rebooting, back to the boot screan, not the 3 clolred boot menu, but the orange start screen with numbers like 2.1.001? however now it has been stuck on the blue windows mobile screen for 5 mins and not changed, it is pluged in to mains but i have no lights ilununated not green or orange or red? i know this is a long shot but any ideas befor i smash it through my local orange shop window?
I think the solution is use mtty tool doing format the DOC is OK
MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef
feffo said:
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef
Click to expand...
Click to collapse
Ola,
just for info.
I made a big mistake detaching the cable during tentatve of CID unlock
My SPV M600was dead ....
Thanks to deep investigation mainly on his forum I found the solution:
Hard reset the M600: Photo button + COmm Manaer buttor + stylo in the ole near usb connector (soft reset),
releasing first the comm button, leving photo button pressed
this leave you in a multicolor screen with usb written in the bottom left (if connected to PC)
then I run the ROM updater that I found here:
http://forum.xda-developers.com/showthread.php?t=297489&page=3
In 10 minutes it as reborn, and I was happy again
Ciao ciao
MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
How 'bout all task? Can you show me ?
Hi i have the same problem i updated my M600 when i went to charge it no lights came on and the fone failed to come on i have tryed to do a hard reset and a sort reset but the fone just looks dead any advice plzzzzzz?
yeah, try turning it off, or remove the battery. Then hold the camera button. Then insert USB. Phone should show bootloader (3colour screen). You can now flash official RUU.
have some on try to flash a original rom with IPL/SPL/Radio Rom/OS?
Hi,
I've been reading through these forums and am getting very lost as to what to do.
I have the Orange SPV M3100 and it won't boot into windows. On switching it on, it does the orange bit: at the bottom - "m05 s04 b06 d1.23" and 'No GSM' flashes up briefly before the freeze on 'Windows Mobile' loading screen.
On pressing 'Ok' and power button together with a soft reset, I get to the tri-colour screen and it says "HERM100", "IPL-1.01", "HERM100", "SPL-1.04", and either "USB" or "Serial" depending on whether or not it's USB'd to a PC port.
I've tried the master reset - top two buttons and a soft reset, followed by 'R' to confirm a full reset. It immediately said 'done' or something to that effect, but still freezes on 'Windows Mobile'.
All the help threads here seem to indicate that I need to have this phone running with Active Sync on the PC to transfer files to it in order to refresh the ROM but Windows [XP] can't see the phone because it's not finished booting.
Please please please can someone give me a nudge in the right direction?
Many thanks
Dave
as you said ok and power together with soft reset action brings you tri colour screen. At that stage you plug in to active sync (4.5) and ensure you have .net framework installed on your PC.
with the tricolour screen, plug PC to phone and run the exe file from one of these ship ROM http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
you should then be able to get an OS back to your phone. Then get this one on to your phone
http://forum.xda-developers.com/showthread.php?t=296722
after that you can flash what ever rom you like make sure you follow the dr's suggestions here. http://forum.xda-developers.com/showpost.php?p=1990320&postcount=6
other than that, http://forum.xda-developers.com/showthread.php?t=299462 this thread is the only one I had to go on with the first time I played with my hermes.
zocster said:
as you said ok and power together with soft reset action brings you tri colour screen. At that stage you plug in to active sync (4.5) and ensure you have .net framework installed on your PC.
with the tricolour screen, plug PC to phone and run the exe file from one of these ship ROM http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
you should then be able to get an OS back to your phone. Then get this one on to your phone
http://forum.xda-developers.com/showthread.php?t=296722
after that you can flash what ever rom you like make sure you follow the dr's suggestions here. http://forum.xda-developers.com/showpost.php?p=1990320&postcount=6
other than that, http://forum.xda-developers.com/showthread.php?t=299462 this thread is the only one I had to go on with the first time I played with my hermes.
Click to expand...
Click to collapse
Will this remove all data from the phone, like contacts, settings?
If so, is there a way retrieve them before reinstalling OS?
Thank you.
[email protected] said:
Will this remove all data from the phone, like contacts, settings?
If so, is there a way retrieve them before reinstalling OS?
Thank you.
Click to expand...
Click to collapse
Well if your phone is semi dead, you can't really retrieve any data other than the ones on the SD card.
zocster said:
Well if your phone is semi dead, you can't really retrieve any data other than the ones on the SD card.
Click to expand...
Click to collapse
What is "semi dead"?
In my case it frozen at windows mobile screen, before it gets the animated "busy" square at the center...any hope?
[email protected] said:
What is "semi dead"?
In my case it frozen at windows mobile screen, before it gets the animated "busy" square at the center...any hope?
Click to expand...
Click to collapse
Well if you can't soft reset successfully then it is semi dead, you have to re flash
zocster said:
as you said ok and power together with soft reset action brings you tri colour screen. At that stage you plug in to active sync (4.5) and ensure you have .net framework installed on your PC.
with the tricolour screen, plug PC to phone and run the exe file from one of these ship ROM http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
you should then be able to get an OS back to your phone. Then get this one on to your phone
#######################################
Hi there, well, I'm back after months of forgetting about this but still hoping to get it to work. Thanks for the above reply, but that method of putting software on still relies on getting activesync to communicate with the mobile phone via the usb cable - my phone doesn't. windows sees that I've connected a usb device but active sync gives up trying to talk to it... any further ideas greatly appreciated...
Best regards
Dave
Click to expand...
Click to collapse
Hi,
I tried to USPL my P4350 (SPL & IPL 4.xx.xxxx) in order to update to WM6.1, using Herald-USPL-Beta3. Everything went OK until ROMUpdateUtility kicked in, and gave me an error: FILE IN USE.
So I started the ROMUpdateUtility again, with the screen still blank, and suddenly the P4350 turned off. I'm 100% sure the battery was at least 90% full during USPL'ing, so why it turned off; I have no idea.
Problem is: I can't power up the device anymore. No LED's, even when attaching it to the power adapter.
Any tips on how to fix this, or is it fair to say my device is now really DEAD?
Thanks!
Some suggestions of a Junior Member.
1st. Try a soft reset. Didn't work? Go to Step 2
2nd. Try a hard reset. Didn't work? Go to Step 3
3rd. Pull the battery off. Put it again. Try to turn it on. Didn't work? Go to Step 4
4rd. Wait replies from advanced user. End.
Thank you for replying
However none of the options you mentioned worked out.
I'm stuck waiting for some expert guidance here
Hi, it's been a while, but today I finally made -sure hope so- some progress..
I purchased a HTC Touch HD two weeks ago, from which I plugged in the power adaptor to see what my P4350 would do. (specs are the same btw as the P4350 power adaptor; output 5V, 1A) On this attempt however, the left LED on the front of the device turned RED for about 5 seconds before turning off again. I plugged in the adaptor again, and it lit up RED again. However, the device did not respond to an attempt to power it up.
What does this mean? Is it not dead after all?
Any tips on what to do?
Thanks again.
Wow man, I'm getting somewhere now!
I got the device powered on holding the RESET+POWER+CAMERA and it now hangs on the IPL + SPL screen.
What is very strange is the following:
IPL 1.08.0001
SPL 1.08.0001
as to where these were above 4.xx.xxxx before I did the USPL'ing. I am a 100% sure.. (not so sure anymore now to be honest.. )
The screen displays USB in the left bottom corner, because it is connected to the USB power supply.
I'm afraid to turn it off because it might not turn on again...
Where do I go from here?
Well, I finally got my P4350 to work again
I noticed I was able to start into bootloader mode using CAMERA+RESET, unlike previous attempts to do so. I don't know what caused the device to boot after 6 weeks, but I guess attaching the Touch HD power adapter did the trick.
At first I followed the instructions at topic "Goldcard for Herald", but somehow I wasn't able to make the MicroSD card bootable using my HTC Touch HD for the formatting.
Instead I went to page 5 of the topic and discovered this comment by leptir79, who stated the creation of the Goldcard could easily be done from a DOS-prompt in Windows, with the MicroSD card in the SD-cardreader on a PC or notebook. And this is what did the trick for me:
- I put the SD-card in my notebook cardreader (drive W: ), opened a DOS-prompt, and ran the following command to format the SD-card with the correct priviliges: FORMAT w: /FS:FAT32 /A:4096
- After that I copied heradiag.nbh to the blank MicroSD card to see if my P4350 would boot from the MicroSD card. And it did. From this tool I ran some diagnostics tools to see whether my device was fully functioning, and I got no errors. I noticed that among the diagnostics tools there was a tool to Flash the device with a new ROM
- So I downloaded HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe, extracted RUU_signed.nbh to the root of my MicroSD card (along with heradiag.nbh), and renamed RUU_signed.nbh to heraimg.nbh.
- I started the P4350 into bootloader mode, booting from the MicroSD card. Heradiag.nbh booted up, and I chose to use the Flash ROM utility that came with heradiag. The device automatically found heraimg.nbh, and started the flashing procedure for my device. After confirming, the flashing started.
After a few minutes my P4350 rebooted, and my device is now running Windows Mobile 6.0. Everything seems to work just fine now.
So, if you don't have a second (working) WM device, but do have an cardreader on your PC or notebook, this really is the best option to create the Goldcard imho.. (even if you do have another WM-phone, really, try this procedure first before installing ActivePerl and all the perl-scripts)
Thanks everyone for all the procedures and help. You all did a great job, but most credits in this case go out to leptir79 who gave me the breakthrough in getting my -left for dead- device to work again.
This is a gold trick thats what i'm waiting for...
I have my heralds bricked since 2 months ago... Yup....really bricked...means cant do bootloader mode or hard reseting on device...
And already sent it to the HTC care center, and they ask for mainboard replacing...which is too expensive for me...400US...later cancelling it...
Searching out this forum, and didn't find a solution to reprogramming OMAP via JTAG...then my research suspended...
Untill I found this...
All I need...just to enter to the bootloader...powering up the brick
Can't wait to try this method @home...ASAP...
For now...just looking for 5V, 1A Charger first....
TIA frummel...
hera100
hie i have a hera100 does not detect on active sync when i try to update rom stops at 2% try diffrernt roms some stop at 7% my IPL 4.14.0002 SPL 4.10.000 i tried formating my 2gig and put heraimg on it nothing happens. pliz help how do i do it now phone shows three colors i cant hard spl coz of active sync. ithanx in advance
Attach phone to a computer with a mini-USB cable and install a RUU ROM.
I bought a second hand X7500.
I feel sheepy , I tried follow instruction (even for nobes like me) but I can't flash anything.
I got athena x7500, It was cid lock so i tried to unlocked it ,getting no connection error...then I found out I forgot to do kaizer hardspl....and then got error 244 ....
because I complete ignorant I done hard reset and format the micro drive....
and cannot flash any new os ....
please help me
additional info
Can get into bootloader (tri color screen) ,cannot recover old os. (black screen)
ipl-v.1.00
spl-v.1.2.oripro
battary status
p.s. forgive me english its not my native language
I managed to flash it yesterday. I had the same problem as you. It seems that u have succeeded to unlock your athena. The black screen also appeared on my athena, so i was worried that i bricked it. But then i found out it is quite normal, if your have followed the 3 steps olipro SPL. If I am not wrong, the black screen appeared in step 2. so now you flash with a wm 6, then restart from the begining the 3 steps olipro SPL. you can download the wm 6 from here. good luck.
http://forum.xda-developers.com/showthread.php?t=334512
by the way, i am completely disappointed with Athena. It is working extremely slow and it cannot play any videos. So it is a waste of money. I never expected such a poor pda from HTC.
doesn't work
wow, really? Make sure you've read as much as you can about flashing issues before you trash the hardware. It took me 8 different ROMs including 4 temporary bricks before I found the configuration that rocks this thing. My video is smooth (all formats) my camera is far better than my tilts, especially in lower light settings, and with real VGA set to 128, this screen is unmatched. Garmin gets me anywhere and I have no speed problems at all. Don't give up, people.
ouch
I gave up ((
adleron said:
I gave up ((
Click to expand...
Click to collapse
get an spl 1.2 rom from here
http://forum.xda-developers.com/showthread.php?t=397518
put your athena into the bootloader screen and connect to your computer
run the upgrade on your computer
do a hard reset , then things should be fine
you can't boot because there is no image on the athena
Almost it is always possible to recover fron the bootloader screen.
nb file
I have 2 nb files as backup,will it help?
adleron said:
I have 2 nb files as backup,will it help?
Click to expand...
Click to collapse
best to start afresh with one of the packages in the link I referenced.
havn't solve
I don't know what is my battery status,
cannot succeed flashing anything, Just get the progrees uploading then black screen.
TNX
Ronen
adleron said:
I don't know what is my battery status,
cannot succeed flashing anything, Just get the progrees uploading then black screen.
TNX
Ronen
Click to expand...
Click to collapse
The phone should charge via usb cable , if not try a different cable.
Once the phone is charged (light shows green around the joystick nipple) another option is to flash via SD card
There is a guide to do this in the wiki
Hello everybody,
I have a refurbished HTC HD2 (sent to me by HTC) that is stuck on a white screen. However, I can get it to a green, blue red and white screen by holding down the volume button and turning it on. I haven't installed anything except a twitter application 2 weeks ago. I was on an interview for a internship and my phone all of the sudden made a loud noise and the screen when black. When I reset it, the screen turned white. Did I brick it? Is there anyway to make my phone work? I am so scared!
candrade511 said:
Hello everybody,
I have a refurbished HTC HD2 (sent to me by HTC) that is stuck on a white screen. However, I can get it to a green, blue red and white screen by holding down the volume button and turning it on. I haven't installed anything except a twitter application 2 weeks ago. I was on an interview for a internship and my phone all of the sudden made a loud noise and the screen when black. When I reset it, the screen turned white. Did I brick it? Is there anyway to make my phone work? I am so scared!
Click to expand...
Click to collapse
Hi,
If you can get the tri-color bootloader screen,it is not bricked.
From there you can start to re-install everything.
I hope you made frequent back ups,because you may not be able to retrieve your data.
Hi candrade,
I'm in the same situation as you matey - take a look at this thread and see if it can help you in any way:
White Screen of Death - Is There a Solution?
I also get a blank white screen. I can enter Bootloader mode but when I connect the device to my PC via USB, the word 'Serial' at the bottom of the screen doesn't change to 'USB'. I've also tried both soft and hard resets, with no luck.
Best of luck trying to resolve the issue. If you do manage to make any progress then please post it on here.
Archey* said:
Hi candrade,
I'm in the same situation as you matey - take a look at this thread and see if it can help you in any way:
White Screen of Death - Is There a Solution?
I also get a blank white screen. I can enter Bootloader mode but when I connect the device to my PC via USB, the word 'Serial' at the bottom of the screen doesn't change to 'USB'. I've also tried both soft and hard resets, with no luck.
Best of luck trying to resolve the issue. If you do manage to make any progress then please post it on here.
Click to expand...
Click to collapse
malybru I am truly grateful for your advice. You put my mind at ease. Where do I get the programs to reinstall on my HTC? Is it a rom? I cannot thank you enough!
Archey, good luck to you as well! I will keep you posted!
Archey* said:
Hi candrade,
I'm in the same situation as you matey - take a look at this thread and see if it can help you in any way:
White Screen of Death - Is There a Solution?
I also get a blank white screen. I can enter Bootloader mode but when I connect the device to my PC via USB, the word 'Serial' at the bottom of the screen doesn't change to 'USB'. I've also tried both soft and hard resets, with no luck.
Best of luck trying to resolve the issue. If you do manage to make any progress then please post it on here.
Click to expand...
Click to collapse
Hi,
If your serial is not changing to usb,maybe your pc/laptop is lacking the correct drivers.
Use ActiveSync for XP and WMDC for Windows 7.
malybru said:
Hi,
If your serial is not changing to usb,maybe your pc/laptop is lacking the correct drivers.
Use ActiveSync for XP and WMDC for Windows 7.
Click to expand...
Click to collapse
You only need the Activesync/WMDC drivers if the phone is fully booted up into WinMo. It is completely different drivers when connected in Bootloader Mode. Even with no drivers installed the 'Serial' will change to 'USB' just be the very nature of initiating the communication with the PC.
fred_up said:
You only need the Activesync/WMDC drivers if the phone is fully booted up into WinMo. It is completely different drivers when connected in Bootloader Mode. Even with no drivers installed the 'Serial' will change to 'USB' just be the very nature of initiating the communication with the PC.
Click to expand...
Click to collapse
Ok,
So could you please explain why Archey*'s phone doesn't change form serial to usb?
malybru said:
Ok,
So could you please explain why Archey*'s phone doesn't change form serial to usb?
Click to expand...
Click to collapse
In order of known problems:
USB cable either not a data cable (only a power cable) or faulty - solution try another cable.
Front USB Connectors on PCs - solution, try the rear USB connector or if possible another PC.
Faulty USB on the the phone - I had the same problem with an HTC Diamond.
Corrupted Bootloader, thus the phone won't communicate with its internal USB controller.
I am still having trouble
How do you do it exactly? I'm sorry phones/computers is not my thing.
Also, are there any atlernatives to using activesync/WMDC? So sorry for all the questions!
candrade511 said:
I am still having trouble
How do you do it exactly? I'm sorry phones/computers is not my thing.
Also, are there any atlernatives to using activesync/WMDC? So sorry for all the questions!
Click to expand...
Click to collapse
Hi,
You only have to install them on your pc/laptop.
candrade511 said:
I am still having trouble
How do you do it exactly? I'm sorry phones/computers is not my thing.
Also, are there any atlernatives to using activesync/WMDC? So sorry for all the questions!
Click to expand...
Click to collapse
You don't need Activesync or WMDC if you connect the phone to the computer in Bootloader Mode.
The easiest method is to download the ROM from HTC's website (this guarantees that you are getting the correct ROM for your phone). Rename the .exe file to .zip, then extract the .nbh file. Rename that .nbh file to LEOIMG.nbh
Copy that file to the root of a FAT32 formatted microSD Card (less than 8GB in size).
Place the SD Card in the HD2.
Put the phone into Bootloader mode. It will then pick up the ROM and install it.
Oh no so this won't work with a Scan Disk 16 gb I take it? And do I put the scan disk into the computer downloading the rom?
And bootloader mode is the multicolored screen correct?
Sorry, totally computer/phone illiterate!
THANKS SO MUCH!
candrade511 said:
Oh no so this won't work with a Scan Disk 16 gb I take it? And do I put the scan disk into the computer downloading the rom?
And bootloader mode is the multicolored screen correct?
Sorry, totally computer/phone illiterate!
THANKS SO MUCH!
Click to expand...
Click to collapse
Yes, Bootloader is the muulticoloured screen.
You can buy or borrow a 1 or 2GB microSD Card with a either a USB adaptor or micro to SD adaptor and SD to USB adaptor. Most laptops and lots of desktops come with built-in SD Card readers.
Did your HD2 not come with a 2GB SD Card?
Of course not :/ came with a really small 16gb ...I'll have to buy it from like Best buy or something?