Important Question - HD2 General

When i disassemble my hd2 and then reassemble it does the whole housing have to be on it before it will power up? Because i recently purchased a LCD + Digitizer combo and watch the video on how to fix it and did. Now when i go to power on my HD2 without the back housing on it just vibrates and no screen turns on?! Can anyone tell me what maybe the problem =)

Important question yet you didn't feel the need to put a descriptive title for you topic?

Related

HD2 Wont Power On Suggestions?

When i disassemble my hd2 and then reassemble it does the whole housing have to be on it before it will power up? Because i recently purchased a LCD + Digitizer combo and watch the video on how to fix it and did. Now when i go to power on my HD2 without the back housing on it just vibrates and no screen turns on?! Can anyone tell me what maybe the problem =)
Check the wiring again.
Sent from my Nexus One using XDA App

Volume rocker switch damaged need help please!

My volume rocker switch isnt working properly. The up section works and feels correct but the bottom part is pressed and and despite it kind of giving a click it fails to function.
I went onto ebay and bought a replacement switch but I want to be sure the best way to replace it.
Anyone have any experience or tips for doing this please?
there are very detailed videos to take apart hd2 and repair in you tube. make a search
I used this video when I replaced the housing. Should help you, too!
http://www.youtube.com/watch?v=cL-jnUKufC4
Thanks guys

[Q] Strange screen Problem HD2

Hi guys, first post. So heres the problem. My HD2 screen is not glued properly to the base of the phone and it has a little space between them at the bottom right corner ( next to the Power button), whenever i press the screen to close the gap the phone freezes, and i have to remove the batery. It is getting really annoying couse i cant even put the damn thing in my pocket without it freezing. The hardware keys dont even work i just have to restart it. So my question is does any1 know of this problem and can he/she offer a way out?
Sorry for my english. thanks in advance
Sounds like it been opened before & had not the best assembly.
Would imagine hardware button ribbon is torn or pulled out of socket hence no buttons.
freezing issue could be down to issue with digitizer ribbon or button ribbon or worse ?
Do you have any issues with screen touch & do you know full history of the handset.
If black Void sticker is missing from case screw near battery pins then you know it been opened & most repairs including so called specialists are poor from ones I've seen.
I know this is the last thing you want to hear but if it were my device I'd take it apart and redo the assembly myself. Theres plenty of how-to videos with detailed steps. Hope this helps.
Sent from my SGH-T889 using xda app-developers app

[Q] HTC HD2 Black screen after falling

My HTC HD2 with kitkat os falling from my hand and after that the screen shows nothing, my phone is alive and everything works like ringing vibrate alarm even touch screen and touch vibrate, but i see nothing and the display is dark.
whats my problem? can i fix it?
thanks for reply me
any body ????
muhama said:
My HTC HD2 with kitkat os falling from my hand and after that the screen shows nothing, my phone is alive and everything works like ringing vibrate alarm even touch screen and touch vibrate, but i see nothing and the display is dark.
whats my problem? can i fix it?
thanks for reply me
Click to expand...
Click to collapse
any body ????
probably need new screen assembly!
needs opening to check lcd connector to mainboard & if all connections good then new screen should be tried.
LCD & digitizer pre built assembly is only about $30 these days for decent ones but indeed not easy fit with some experience or good read up on procedure & good care when doing it.
Mister B said:
probably need new screen assembly!
needs opening to check lcd connector to mainboard & if all connections good then new screen should be tried.
LCD & digitizer pre built assembly is only about $30 these days for decent ones but indeed not easy fit with some experience or good read up on procedure & good care when doing it.
Click to expand...
Click to collapse
Thanks for reply me:good:
How can i open my phone? And where is connector located?
Do you have a link to view that?
Have a read of this thread for start
http://forum.xda-developers.com/showthread.php?t=1566179
Plenty more if do a search
Basically be very very careful, use plastic pry tool ONLY to remove back, start at top. 2 clips about 7mm in from top edges then once released work down right side, DO NOT stick any tools in near the volume key, if doing it right the back comes of very easy (2 pry tools are better as can keep one in top sstopping it clipping back in)
Once back off handle with care, rough handling breaks th spring contacts for antenna etc.
LCD from mainboad can be disconnected from mainboard without fully removing flex & is absolute best way do it.
I did write few posts on it so will try dig them up & link you.
If buy lcd/gigi assemble also buy a button board ribbon as they like only $3USD, with spare button ribbon you can easily plug new lcd/digi in & plug new button board ribbon into mainboard & hold a battery on it to do a test befoe sticking things together.
Also you likely damage ribbon if not careful so spare likely get used on rebuild.
Parts link is in HD2 Wiki
http://forum.xda-developers.com/wiki/HTC_HD2#Fixes.2C_Hints_.26_Tips

Screen replacement

Hi guys! I broke the screen of my lovely G2. It has a little scratch at bottom like 8mm above the back button, from the left to the right. THe back button works , and the Home button sometimes, the phone booting up like dream, showing lock and home screens, so i think Mobo is fine.
So the Question is: if i purchase this and replace the screen following this tutorial, will it work? Please share your thoughts with me Thanks in Advance!
Regards,
Mate
I recommend to buy the whole LCD + frame of the LG 2, with that you only have to remove the old screen and put the new one without replacing anything else. Many sellers offer the G2 LCD panel without the frame a bit cheaper than the complete set and you must take out the glued frame and then put in the new LCD panel... better buy the whole set.

Categories

Resources