Database Users

Neocore results

Curious as to what neocore results you guys are ripping?
I ripped 32.1 FPS running Fresh Toast and overclocked to 710 MHZ.
other scores-31.4 31.8,32.2,32.4,32.7
Highest so far is 33.0
Post results including ROM and clock etc.

eagles16 said:
Curious as to what neocore results you guys are ripping?
I ripped 32.1 FPS running Fresh Toast and overclocked to 710 MHZ.
other scores-31.4 31.8
Highest so far is 32.4!
Post results including ROM and clock etc.
Click to expand...
Click to collapse
On Fresh toast clock to 768mhz i had 34.5 fps.
Current darchdroid 768mhz i got 32.2 fps

Jus10o said:
On Fresh toast clock to 768mhz i had 34.5 fps.
Current darchdroid 768mhz i got 32.2 fps
Click to expand...
Click to collapse
wow, that's pretty fast on Fresh, im curious as to how other roms perform

I just pulled in a 25.6
darchdroid 2.6.4 no autokiller. no taskiller. no setcpu. my phone has been running for... well ever since the last update.
that's with sound. pretty good I think?

Not bad considering no overclocking, I don't use a a task.killer either
-------------------------------------
Sent via the XDA Tapatalk App

22.2 on zenmt3g without overclock or any taskkillers I'm wondering what stock rom will get? I guess i'll run the old ruu when I get back.

thatguythatdid said:
22.2 on zenmt3g without overclock or any taskkillers I'm wondering what stock rom will get? I guess i'll run the old ruu when I get back.
Click to expand...
Click to collapse
when i was stock 2.1 unrooted i would get around 17ish if i was lucky

27.1 FPS
Fresh 2.1.2 with no overclocking or anything.

thedudejdog said:
I just pulled in a 25.6
darchdroid 2.6.4 no autokiller. no taskiller. no setcpu. my phone has been running for... well ever since the last update.
that's with sound. pretty good I think?
Click to expand...
Click to collapse
If the op was replying to this guy^^
He is overclocked, its just only 710mhz. Its what it defaults to if you dont use setcpu or similar.
And 25 with sound is pretty good. Try it without sound you might get 28 to 30.. Almost all neocore test that people post are without sound.

Getting 30.9 without sound and 27 with on Zen's mt3g Rom
Sent from my HERO200 using Tapatalk

I just pulled in a 25.6
darchdroid 2.6.4 no autokiller. no taskiller. no setcpu. my phone has been running for... well ever since the last update.
Click to expand...
Click to collapse
If the op was replying to this guy^^
He is overclocked, its just only 710mhz. Its what it defaults to if you dont use setcpu or similar.
And 25 with sound is pretty good. Try it without sound you might get 28 to 30.. Almost all neocore test that people post are without sound.
Click to expand...
Click to collapse
Oh, thanks for the info, I had no idea that it autoclocked if you didn't use like oc widget and setcpu
-------------------------------------
Sent via the XDA Tapatalk App

Im running DC 2.08.1 with sense disable with memkiller set to low, no overclocking and I got 29.3 without sound and 24.5 with sound.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
im running dc 2.07.2 customized 31.0fps (oc and jit enable)

32.9 - no sound
DC 2.08.1
710 mhz with toast's kernel

How are you getting results that high?? I'm using Aloysius 2.1 OC'd to 768 and I'm only getting 4.5FPS with sound off!! What am I doing wrong?? lol

SONIC589 said:
How are you getting results that high?? I'm using Aloysius 2.1 OC'd to 768 and I'm only getting 4.5FPS with sound off!! What am I doing wrong?? lol
Click to expand...
Click to collapse
probably has broken opengl es for the sake of better live wallpaper compatibility.

I just got some weird results. I ran the 2.1 ruu then installed adw launcher. Ran neocore three times with sound. The first time got 27. something fps second time stopped sense and erased it's data and got 25.something fps it force closed so I ran it again and got 17 fps. Weird

Fresh 2.1.2 overclocked 556-768 autokiller - optimum
sound on - 32.1fps
sound off - 32.5fps

60.1 FPS
LG GT540, Android 2.2.1 Quarkx cyanogenMod-6.1.1
overclocked from 600 MHz to 806 MHz
magnificat.uw.hu/capture3.png

im getting 29.7fps with sound, & 33.3fps w/o sound,, running CM6.1 (nightly), kernel #589, overclocked to 749mhz, autokiller @ optimum

[Q] SetCPU settings for Epic?

Being new to the Android world, I'm a little unsure of what my settings should be for SetCPU on my Epic.
Looking for something that would offer a good balance of battery and performance without crippling the device too much.
Thanks in advance...
Sent from my SPH-D700 using XDA App

I keep mine short and simple. I am using a kernel at allows for overclocking so I set the max to 1.2Ghz and the min to 200Mhz. You can play around with the scaling to see which governor works for you best. It's really up to your butt-o-meter.
Under "Profiles" I have one single profile for "Sceen Off" that keeps my EPIC at 200Mhz when the screen is off.

spiicytuna said:
Under "Profiles" I have one single profile for "Sceen Off" that keeps my EPIC at 200Mhz when the screen is off.
Click to expand...
Click to collapse
Your epic doesn't freeze when you do that? No matter which kernel I use, if I set it so that my phone down clocks when the screen is off it freezes. It won't unlock and the only way for me to be able to use it again is to pull the battery out and reboot.
Sent from my Samsung Epic using XDA App

no problems here with my settings
rockethot said:
Your epic doesn't freeze when you do that? No matter which kernel I use, if I set it so that my phone down clocks when the screen is off it freezes. It won't unlock and the only way for me to be able to use it again is to pull the battery out and reboot.
Sent from my Samsung Epic using XDA App
Click to expand...
Click to collapse
I set mines to min 100 max 1200 conservative scaling and its been almost 48 hours and I have yet to have a lock up or freeze up im using the Stoopid fast kernel posted in Android development, set cpu 2.03 and AOSP OC v2 ROM

rockethot said:
Your epic doesn't freeze when you do that? No matter which kernel I use, if I set it so that my phone down clocks when the screen is off it freezes. It won't unlock and the only way for me to be able to use it again is to pull the battery out and reboot.
Sent from my Samsung Epic using XDA App
Click to expand...
Click to collapse
Nope. Seems to love it. I guess my EPIC and my EVO share their love for UV + underclocking maybe they really are related

I keep my Epic 1.2 -600 , I'd recommend the Stoopid Fast Kernel as well. The phone is still quick and phone is better with battery life and a hell of a lot quicker when it comes to charging.

I have mine set to 100 Min / 1200 Max. No problems that I can tell.
MixUp kernel.

What about the advanced settings? Can somebody explain to me what they are for?

when i input my own settings it wont show the settings. it just says 1 if at max and 0 if anything else. i love the app i just dont think its really working. i'm wondering if the kernel i'm on allows it to change cpu speeds.
running suppernova build 1.5
kernel 2.6.32.9 (not sure what that means)

Mr.Muscles said:
I keep my Epic 1.2 -600 , I'd recommend the Stoopid Fast Kernel as well. The phone is still quick and phone is better with battery life and a hell of a lot quicker when it comes to charging.
Click to expand...
Click to collapse
might be a stupid question...but is that a Froyo Kernel your running thur?

Here is what I have on mine set to and I get at least 11 to 12hrs of battery life and its super fast
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-D700 bonsai4all v1.1.4 ext4 using XDA App

Estewa_619 said:
Here is what I have on mine set to and I get at least 11 to 12hrs of battery life and its super fast
Sent from my SPH-D700 bonsai4all v1.1.4 ext4 using XDA App
Click to expand...
Click to collapse
i was always told to leave it on concervative scaling for sgs phones. Conservative won't allow my phone's screen to toggle on if my max is over 400. If i set it to ondemand, it works just fine at 400mhz.

jemarent said:
i was always told to leave it on concervative scaling for sgs phones. Conservative won't allow my phone's screen to toggle on if my max is over 400. If i set it to ondemand, it works just fine at 400mhz.
Click to expand...
Click to collapse
Huh. I just set it up the way I have it my phone just flys and I get 1965 on quadrant just try it out and if it doesn't work just go back to conservative. Make sure u enable the profiles
Sent from my SPH-D700 using XDA App

I thought SetCPU didn't work with the Froyo Builds.

imwillzillla said:
I thought SetCPU didn't work with the Froyo Builds.
Click to expand...
Click to collapse
It does. Where did u hear that
Sent from my SPH-D700 using XDA App

Estewa_619 said:
It does. Where did u hear that
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I forgot where I read it but it was when I sold my Evo and moved to this section of the forums. I'll look around some more and see if I come up with something but I thought it was something like "Until Froyo gets officially released Set Cpu can't work with it. I bought set cpu a long time ago and didn't use it since. I'm about to throw that bad boy on though to see if it makes any difference.

It's not that SetCPU doesn't work with froyo, but the stock kernel on froyo already scales between 100mhz to 1000mhz without it. I do not have it installed and when I run a system monitor mine usually idles between 200mhz to 400mhz and ramps up whenever a notification comes in or syncing starts.
Just did a screen cap and the phone it idling at 135mhz.

pjree said:
It's not that SetCPU doesn't work with froyo, but the stock kernel on froyo already scales between 100mhz to 1000mhz without it. I do not have it installed and when I run a system monitor mine usually idles between 200mhz to 400mhz and ramps up whenever a notification comes in or syncing starts.
Just did a screen cap and the phone it idling at 135mhz.
Click to expand...
Click to collapse
thats true.
also. setCPU messes with your 4g connection to connect. i wasent able to connect when i turnned on the setcpu but i was on the stock conservative setting. i think 4g requires alot of cpu usage that setCPU dosent recognize. SMH

[Q] Low Quadrant Scores

I know that this tool isn't a good indicator of performance... but when I see other people with the EVO getting 1200+ and I am at 800-900, I am starting to wonder if there is a setting wrong. My phone occasionally feels sluggish. Any idea's what the cause could be? using an AOSP rom with Tiamat Kernel
- Just realized I wasn't in Q&A forums Sorry! - please delete if needed

Stuke00 said:
I know that this tool isn't a good indicator of performance... but when I see other people with the EVO getting 1200+ and I am at 800-900, I am starting to wonder if there is a setting wrong. My phone occasionally feels sluggish. Any idea's what the cause could be? using an AOSP rom with Tiamat Kernel
Click to expand...
Click to collapse
Good question!
Ive always wondered why some score so low on good combos.
I'm on CM nightly rc3 build 18 with savgzen 1.0.0 cfs-havs and scoring very well
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

new quad you will get low scores
imho quad and all the other benchmark test mean nothing

CheesyNutz said:
new quad you will get low scores
imho quad and all the other benchmark test mean nothing
Click to expand...
Click to collapse
I agree when comparing to other phones... but 2 phones of the same model should get similar scores right?

Stuke00 said:
I agree when comparing to other phones... but 2 phones of the same model should get similar scores right?
Click to expand...
Click to collapse
Have you ran it off of a fresh reboot?
I find my best scores were when I rebooted let it sit for 3-5 min after reboot, and then fire it up.

Mark_in_Tulsa said:
Have you ran it off of a fresh reboot?
I find my best scores were when I rebooted let it sit for 3-5 min after reboot, and then fire it up.
Click to expand...
Click to collapse
Trying it again after the phones been on a few minutes.
I used to use SETCPU and I thought maybe that screwed things up

If you want to increase scores why don't you put your Max frequency at 1190 and min at 1190 with setcpu. High scores are a thing of the past.
~ d3rk

dirkyd3rk said:
If you want to increase scores why don't you put your Max frequency at 1190 and min at 1190 with setcpu. High scores are a thing of the past.
~ d3rk
Click to expand...
Click to collapse
That is with my CPU at 1190. I am not trying to get a high score, but a score my phone should be able to get, you know? I see someone with an EVO get 1500 and then I am thinking something is wrong with my phone... I have the same phone..

Stuke00 said:
That is with my CPU at 1190. I am not trying to get a high score, but a score my phone should be able to get, you know? I see someone with an EVO get 1500 and then I am thinking something is wrong with my phone... I have the same phone..
Click to expand...
Click to collapse
Putting stock in scores is foolish though. 936 does seem a Tad bit low for sure. My set up is cm7 #36, tiamat kernel 3.3.5, JIT on, setcpu 1113 Max, 422 min smartass governor. I just ran a linpack and got 37mflops and 1200 in benchmark. This is the same set up I usually run on any rom or kernel. I try not to clock so high because it just drains battery. My evo actually can perform flawlessly clocked at even 998mhz. The only thing I notice different is that scores change and I don't really take a performance hit. Underclocking is the new overclocking lol. My last suggestion would be to play around with different kernels to achieve what you desire. Try savage zen!
Edit: just ran these 2 test just for you right now. Same results and I'm using same kernel you are.
~ d3rk

Run, it once, and then run it again right after w/out quitting. The if you run it multiple times (at least on my phone), all subsequent scores are on par with the second one which is usually 1-300 more than the first. Won't mean anything any different, but at least you might get some higher scores.
Also, you might need to try some different kernel combinations as well as different clock speeds. Mine usually does fine at 998 sometimes even at 921, but if I go too high it will start to slow things down. If you're not getting good results at 1190, try backing it off one setting at a time and see if you can get improved scores.
As far as comparing to other phones, even of the same make/model, you can't really do that. As long as they're in the same ball park, within a couple hundred, you're probably OK. Every phone reacts differently.
It also depends on the version of quadrant. You def can't compare diff phones running diff versions. I usually don't use it to compare to other phones, just diff setups on my phone. I know if I'm getting 1200 avg and then I all of the sudden flash a ROM and kernel and can't break 800 that something is probably wrong.
The most important thing is how the phone feels though. The fact that you say it feels sluggish leads me to believe you might need to try a diff kernel or see if something is eating up your CPU. Also, when you're over clocking, the min clock speed can effect your scores just as much as the max speed.

Ya give savage a go.
Kernel CPU setting:
Ondemand governor
Min 245
Max 998
My Device scores high runs smooth battery drain not a problem.

I just tested mine and got 1326. With these settings.. CM7 Nightly 36 with 2.6.37.6-Tiamat -v3.3.5 kernal.
Governor - Conservative
Min - 384
Max 1036

Share your benchmark score! (any application test you want)

I'm curious to know if anyone has incredible results
I use quadrant and cf- bench, for now I have a quadrant screenshot, this is also my average score:
Uploaded at Picoodle.com
I use last Mysam rom with abysskernel 2.5

theendfear said:
I'm curious to know if anyone has incredible results
I use quadrant and cf- bench, for now I have a quadrant screenshot, this is also my average score:
Uploaded at Picoodle.com
I use last Mysam rom with abysskernel 2.5
Click to expand...
Click to collapse
At what cpu speed, 1600-1664-1704?

Use Antutu or CF-Bench...Quadrant is a random number generator.

Mine is fully stock and antutu gives something around 6200, what about others?
Sent from my GT-N7000 using XDA App

this is my score with cf-bench:
Uploaded at Picoodle.com
always with abyssnote kernel 2.5 and mysam rom at 1.66ghz

CPU at 1.7GHz @ Rocket ROM v11
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@vessk0 wow!! at antutu test 7528 its exellent! I tried now, and don't go up 6900.. I think Its time to change rom =)

Are the 3D benchmarks limited to ±58fps (the refresh rate of the screen)? Is there any v-sync off setting that could unleash the power and give better results?

Yup, as far as i know it's limited to 60 fps. (Correct me if i'm wrong)

vessk0 said:
CPU at 1.7GHz @ Rocket ROM v11
Click to expand...
Click to collapse
Do I saw something wrong?
RAM: 1205
how you do that? can you teach me?

Even better with v12, second in world N7000 chart

Sent from my GT-N7000 using XDA App

Hi vessk0, I have the same rom now, but the score is too low
what's your configuration? I tried with 1.7ghz, aggressive task killer in sistem tuner app, 2048mb cache on sd and noop setted in I/O scheduler section.. the score is around 6900-7000 points

For benchmark I use 1.7GHz @ Performance governer, but internal SD card in settings of Antutu. That's it.

vessk0 said:
For benchmark I use 1.7GHz @ Performance governer, but internal SD card in settings of Antutu. That's it.
Click to expand...
Click to collapse
every time I use 1.7GHz and performance gov. my phone allways freezes.
I tried some different roms and kernels but same result
any advice?

k-12 said:
every time I use 1.7GHz and performance gov. my phone allways freezes.
I tried some different roms and kernels but same result
any advice?
Click to expand...
Click to collapse
Check your voltages, try to reduce it to 1325-1350 for 1.7 (default is 1450). That'll help it run cooler, and make it less likely to lock up.
But that said, you may just have an Exynos chip that is not happy at that speed, there is no guarantee that they can all do 1.7.

Rocket ROM V12/Abyss 2.6 @1.7GHz Performance Governor:
Quadrant
Linpack
Antutu
CF-Bench
SunSpider
BrowserMark
Vellamo
And here's a fairly recent benchmark of the Droid Razr with some other phones...you can use this as rough basis of comparison.
http://www.anandtech.com/show/5198/motorola-droid-razr-review-a-better-clad-bionic/8
TL;DR: The Note really kicks ass when you crank up the clocks!

@croak I have tested your same combination rom/kernel and for now seems the best! with performance gov and cpu set to 1.7ghz the score is very higher in all tests
our note is one of the most promising device, estimating that the development is just at the beginning point

What's going to be amazing is how fast the upcoming A15-based Exynos will be. Clock for clock, it's supposed to be 20% faster than A9 cores. And they will be shipping at 2Ghz!
I expect that the A15 Exynos dual-core will outperform a quad-core Tegra 3 and use a lot less power doing it. And it'll be cheaper to make.

Croak said:
I expect that the A15 Exynos dual-core will outperform a quad-core Tegra 3 and use a lot less power doing it. And it'll be cheaper to make.
Click to expand...
Click to collapse
One of the 3 can not be right. If it outperform a quadcore hardly will be needing less power. If it needs less power hardly will outperform quadcores and at end if both are true then no way to be cheaper!!!!
From quadlogic!!!
Sent from my GT-N7000 using XDA App

[Q] OC/UV Beater2v1.7 makes my phone unstable with default values, help!

Ok I need to narrow down if I'm doing something wrong, or if my phone is actually faulty.
I have the latest Virtuous Affinity Rom, and installed OC/UV Beater, and I cannot seem to find a stable setting, and after using the VDD/OC reset .zip's that are supposed to reset everything to normal, I still have the issues.
I'm new to the whole OC the phone thing, can someone tell me if my voltages are far off what they should be for my phone.
ALSO could anyone supply me with their virgin (or stable working) files from their MT4G found in the sys/devices/system/cpu/cpu0/cpufreq/ folder so I can double check mine?
It seems below the 537600mhz is where I'm unstable. I stress tested 3 freq at a time and went down the list, that's where I would get the issues.
My OC settings in OC/UV Beater are:
Wake Gov: ondemand
Wake Min: 122000
Wake Max: 1459200
Sleep Gov: conservative
Sleep Min: 122000
Sleep Max: 460800
VDD:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I can think of 2 things.
1) Your wake min is WAY too low. That alone could be the issue.
2) Try bumping the voltage on higher frequencies up a notch.
Asking us if your voltages are ok is asking us a question we can't answer. Always start with default voltages. If that gives you stability VERY slowly adjust your voltage down a notch at a time, allowing time and testing between each setting. Never set on boot until you're SURE it's stable.
Sent from my HTC Glacier using xda app-developers app

estallings15 said:
I can think of 2 things.
1) Your wake min is WAY too low. That alone could be the issue.
2) Try bumping the voltage on higher frequencies up a notch.
Asking us if your voltages are ok is asking us a question we can't answer. Always start with default voltages. If that gives you stability VERY slowly adjust your voltage down a notch at a time, allowing time and testing between each setting. Never set on boot until you're SURE it's stable.
Sent from my HTC Glacier using xda app-developers app
Click to expand...
Click to collapse
Thanks for that. I understand what you are saying as I have been overclocking my PC for years, however, what I don't understand is why does OC/UV Beater2 seem to not be stable at all stock clocks and voltages when I stress test.
I have now gotten 1.5Ghz through 537600mhz stable, however, I cannot get 460mhz through 122mhz stable at stock volts, but it is stable with the voltage boost I have added. I'm curious to see if maybe my default voltage settings have gotten corrupted or misconfigured, that's why I am looking for someone to fill me in on the stock VDD and Freq for my cpu.
Also looking for advice as to what I have set there is normal voltage for the frequencies there?

Just looked at mine on cm 7.2. Your voltages look a little low across rhe board. Clear the data on oc/uv beater and reflash your kernel.
Sent from my HTC Glacier using xda app-developers app

Awesome, when you get a chance could you give me some screen shots of your voltages or tell me how much more yours are boosted?

Well, I'm on a different ROM now, but maybe this will help you. The voltages on this kernel are pretty low.
Sent from my HTC Glacier using xda app-developers app