Hi,
after an Accidentally terminated flashing process, my s200 stuck on acer logo and "clean boot"message, i tried hard reset (vol +- and reset button) and all available custom roms (Rafyvitto, Arto etc..) but some problem.. any advice is welcome
Thanks in advance.
Related
One fine day it refused to startup. No matter how many resets i do it always hangs up at the startup screen. "windows mobile" written on the top and HTC at the bottom. Tried soft resetting, hard resetting, nothing works. Am able to get into the bootloader mode though(by pressing ok button and power button then hitting reset, no clue what that mode is for.)
I have no clue what to do ? how to get it to work again. Could some one help please??
is this on a 6.1 rom?
if so
Get into bootloader mode (side ok and power buttons and reset)
Test for bad blocks via mtty and fix if need be.
Flash carrier rom (AT&T official rom reccomended)
Reflash 6.1 rom
however if it is just from official rom go to bootloader mode install hardspl and reflash your current rom
hi all pro(s)...
im still a noobie here and i juz got my o2 xda exec...
when i try to upgrade it to wm6 rom it failed n got stuck in boot loader mode...
any pro(s) have the same experience and managed to solve the problem pls do share it wif me...
tq all...!!
Perhaps newbs should read wiki etc.
Can't you just reboot?
Or Hard-reset (both soft keys + reset key)
Here is tool for exit bootloader
Hi Guys,
weird problem,
I tried to hard reset (hold 2 soft keys, press power, press 0 when prompted) but now I get stuck at the IPL/SPL screen.
It doesn't even boot into windows now...
has anyone else been able to hard reset with this procedure after flashing to WM6.1?
Thanks,
mr_yellow said:
Hi Guys,
weird problem,
I tried to hard reset (hold 2 soft keys, press power, press 0 when prompted) but now I get stuck at the IPL/SPL screen.
It doesn't even boot into windows now...
has anyone else been able to hard reset with this procedure after flashing to WM6.1?
Thanks,
Click to expand...
Click to collapse
As usualy standart hard reset (hold 2 soft keys, press power, press 0 when prompted) erase the OS such as WM6-6.1, cause they contains in ROM in other method( such a user files), reflash eou phone again with WM6, as you do it previosly, before it do "format BINFS" in MTTY (ATENTION-DO NOT USE ANOTHER FORMAT COMANDS, it can damage the CID).
And when you again whant do HR on WM6,WM6.1, when phone booting on you see red liters: "clean hive-press <1>; "format partition-press<2> it is HR for WM6,WM6.1
Whoa..
sorry, i just need to confirm/clarify...
1) Assuming you have Wm 6.1 installed on typhoon, if you hard reset using the "old" method (hold 2 soft keys, press power, then 0 when prompted), this will actually WIPE the WM 6.1 rom and (i assume) corrupt it? this is why I got stuck at the boot loader?
2) The "new" method to hard reset if you have WM 6.1 installed is to press 1 and then 2 when prompted during the boot loader (with the clean hive/format partition prompt)?
mr_yellow said:
Whoa..
sorry, i just need to confirm/clarify...
1) Assuming you have Wm 6.1 installed on typhoon, if you hard reset using the "old" method (hold 2 soft keys, press power, then 0 when prompted), this will actually WIPE the WM 6.1 rom and (i assume) corrupt it? this is why I got stuck at the boot loader?
2) The "new" method to hard reset if you have WM 6.1 installed is to press 1 and then 2 when prompted during the boot loader (with the clean hive/format partition prompt)?
Click to expand...
Click to collapse
1)Yes, this will actually WIPE the WM 6.1 rom.
2)Yes, to hard reset if you have WM 6.1 installed is to press 1 and then 2 when prompted during the phone boot, you see some informatin on splash screen (with the clean hive/format partition prompt), not in boot loader.
this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.
rakec00 said:
this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.
Click to expand...
Click to collapse
hi,
am having problem here. doing something wrong while flash rom & my x1 bricked. now bootloader shows no image. when turn on it stuck at sony logo.
how do i overcome this? please help.
me too..
just want to install the Energy Leo (this is my first time, n i've done the HARD-SPL before install the ROM)
did u mean that i should enter the bootloader mode n do the hard reset while in bootloader mode?
Thankyou very much!
sorry if my english is bad..
3rd party world..
fully bricked
Hi
After last power off Xperia X1 dont wake up at all
- no bootloader
- no hard reset
- no power up
- no any single spark of life
Is there some trick or JTAG to wake up the phone.
Thanks in advance.
charge the phone completely, enter bootloader using the camera button+power button, task29, then flash via RUU
task29 saved me after bricking my phone few days ago when my device disconnected during a rom installation... something i tried and hoped it worked then it did... RUU wont even install unless i task29 that heartbreaking moment
What is task29
Suhel28 said:
What is task29
Click to expand...
Click to collapse
its the miracle task
inheaven said:
its the miracle task
Click to expand...
Click to collapse
very funny can you please elaborate..
I would also like to know of this task of 29.
I'm screwing around allot on my phone and an accidental brick'ing would like to be un'bricked.
Greetings!
I am trying to flash a new ROM to my HTC Legend. However, when i choose Install new ROM in Clockworkmod (and selects my ROM) it just reboots and shows a phone with a red triangle on top. Does anyone know what´s wrong?
I´ve currently got CM7 installed.
Thanks in advance.
Patrick
I managed to fix it, pressing Power + Vol Up made my way into the recovery