Hi Guys,
weird problem,
I tried to hard reset (hold 2 soft keys, press power, press 0 when prompted) but now I get stuck at the IPL/SPL screen.
It doesn't even boot into windows now...
has anyone else been able to hard reset with this procedure after flashing to WM6.1?
Thanks,
mr_yellow said:
Hi Guys,
weird problem,
I tried to hard reset (hold 2 soft keys, press power, press 0 when prompted) but now I get stuck at the IPL/SPL screen.
It doesn't even boot into windows now...
has anyone else been able to hard reset with this procedure after flashing to WM6.1?
Thanks,
Click to expand...
Click to collapse
As usualy standart hard reset (hold 2 soft keys, press power, press 0 when prompted) erase the OS such as WM6-6.1, cause they contains in ROM in other method( such a user files), reflash eou phone again with WM6, as you do it previosly, before it do "format BINFS" in MTTY (ATENTION-DO NOT USE ANOTHER FORMAT COMANDS, it can damage the CID).
And when you again whant do HR on WM6,WM6.1, when phone booting on you see red liters: "clean hive-press <1>; "format partition-press<2> it is HR for WM6,WM6.1
Whoa..
sorry, i just need to confirm/clarify...
1) Assuming you have Wm 6.1 installed on typhoon, if you hard reset using the "old" method (hold 2 soft keys, press power, then 0 when prompted), this will actually WIPE the WM 6.1 rom and (i assume) corrupt it? this is why I got stuck at the boot loader?
2) The "new" method to hard reset if you have WM 6.1 installed is to press 1 and then 2 when prompted during the boot loader (with the clean hive/format partition prompt)?
mr_yellow said:
Whoa..
sorry, i just need to confirm/clarify...
1) Assuming you have Wm 6.1 installed on typhoon, if you hard reset using the "old" method (hold 2 soft keys, press power, then 0 when prompted), this will actually WIPE the WM 6.1 rom and (i assume) corrupt it? this is why I got stuck at the boot loader?
2) The "new" method to hard reset if you have WM 6.1 installed is to press 1 and then 2 when prompted during the boot loader (with the clean hive/format partition prompt)?
Click to expand...
Click to collapse
1)Yes, this will actually WIPE the WM 6.1 rom.
2)Yes, to hard reset if you have WM 6.1 installed is to press 1 and then 2 when prompted during the phone boot, you see some informatin on splash screen (with the clean hive/format partition prompt), not in boot loader.
Related
Problem with my htc 3300.
I try to boot but is freezes . I di hard reset it starts showing th first screen then freeze.
Can you help me
make hard reset. if is not working, install a clean wm6 version, official one. And don't forget about CID Unlock
Athanti said:
Problem with my htc 3300.
I try to boot but is freezes . I di hard reset it starts showing th first screen then freeze.
Can you help me
Click to expand...
Click to collapse
Do a hard reset yes. I had the same problem once and this helped me.
Hard reset= hold both selection button next to green and red button.
Keep them push down and switch on your Artemis. Afterwards you will get a question. To proceed is pushing the green key.
Your Artemis will be restarted again with all basic (use lost all your contacts but you still be able to activesync them back if you did make a backup)
**good luck**
Hard reset= hold both Left&Right button + Reset button (lower left)
An rainbow screen will appear (PDA must be connected on USB)
After, you can flash a ROM again...
One fine day it refused to startup. No matter how many resets i do it always hangs up at the startup screen. "windows mobile" written on the top and HTC at the bottom. Tried soft resetting, hard resetting, nothing works. Am able to get into the bootloader mode though(by pressing ok button and power button then hitting reset, no clue what that mode is for.)
I have no clue what to do ? how to get it to work again. Could some one help please??
is this on a 6.1 rom?
if so
Get into bootloader mode (side ok and power buttons and reset)
Test for bad blocks via mtty and fix if need be.
Flash carrier rom (AT&T official rom reccomended)
Reflash 6.1 rom
however if it is just from official rom go to bootloader mode install hardspl and reflash your current rom
I need help,recently i upgrade my jas jam with (CRC_r14.1-naked.bs)it was good,but after few days,when i switch on my phone,the screen strucks and the display is showing (windows mobile 6.1)and nothing but when yesterday i switch on it again,it displays good,but when i click on windows icon,the list is vanished only it shows(today,recent programs)and nothing is working in windows,and then i connect to active sync and wants to upgarde again with (CRC_r14.1-naked.bs)and i follow all the steps but atlast activesync showing no device is connected,after that i repeat the same thing,but it is showing like that only, wat can i do,iam in trouble can any body tell me how to go through this, i will be very very thankful to u.
Do a hard reset (hold context buttons and hit the reset button with stylus). Or you can go to bootloader (bold power + side OK and hit reset button with stylus) and now you will be able to flash via RUUWrapper.
imate
pajousek said:
Do a hard reset (hold context buttons and hit the reset button with stylus). Or you can go to bootloader (bold power + side OK and hit reset button with stylus) and now you will be able to flash via RUUWrapper.
Click to expand...
Click to collapse
hi,yes i've done like that only (hold the ok button and hit the stylus on rest but still it is giving crcs rom loading )second one (hold power+side ok)then its giving the hermes display with four color bands,what can i do,plz tell me.
ttsadaf said:
hi,yes i've done like that only (hold the ok button and hit the stylus on rest but still it is giving crcs rom loading )second one (hold power+side ok)then its giving the hermes display with four color bands,what can i do,plz tell me.
Click to expand...
Click to collapse
Where you have the colour bands, you can flash from PC without connecting to activesync. At least that works for me.
And try also context buttons on the HW keyboard.
You have to hold BOT soft keys and reset with stylus. Holding down the ok button and resetting does nothing but a soft reset. You want to hard reset.
You will still get CRC's rom loading up as that is the loaded OS.
If you wish to upgrade then, if you have Hard SPL (SPL: 2.10 oli), then you can use the sd card method fromn the bootloader (tri-colour) screen.
SD Card method
1. Format SD card fat32 (2Gb or less ONLY) then copy the .nbh file to it. Rename .nbh file to "hermimg.nbh".
2. Insert into Hermes and go to bootloader.
3. If sd card is formatted fat32 and flash file is renamed properly, follow the prompts.
Cheers...
Hi everybody,
on my Trinity hard reset doesn't work anymore. After for example flashing with a new rom bootloader just blinking. OS is booting normally but hard buttons doesn't work only the "joypad" in the middle. For hardreset i have to press Send button to accept hard reset when i remeber well. But nothing happend when pressing the button. In fact that the device wants a hardreset, softreset is the same problem. I have to replace battery to access OS and boot device. Has anybody a solution? Or is there a progam for WM which can make a hardresend?
€dit:
Is it possible that something is wrong with the bootloader?
thanks and best
Robbat
Hello, I've got a typhoon, and have loaded the 6.1 rom. But, i'm not able to hard reset my device afterwards. I've tried many times to reset by using the sequence in the wiki (2 soft keys, turn on, push 0), but it never works. I get to the black screen where i should press 0, but when i push 0 it always goes to the blue boot screen and starts up normally, without a hard reset.
So, anyone have better way of hardresetting?
reboot, press '1' when u see the red text screen.
tjohnso1 said:
Hello, I've got a typhoon, and have loaded the 6.1 rom. But, i'm not able to hard reset my device afterwards. I've tried many times to reset by using the sequence in the wiki (2 soft keys, turn on, push 0), but it never works. I get to the black screen where i should press 0, but when i push 0 it always goes to the blue boot screen and starts up normally, without a hard reset.
So, anyone have better way of hardresetting?
Click to expand...
Click to collapse
Hi, if that doesn't work (you may have the original spl) reflash spl using this GUIDE. Hope this helps!