Problem with my htc 3300.
I try to boot but is freezes . I di hard reset it starts showing th first screen then freeze.
Can you help me
make hard reset. if is not working, install a clean wm6 version, official one. And don't forget about CID Unlock
Athanti said:
Problem with my htc 3300.
I try to boot but is freezes . I di hard reset it starts showing th first screen then freeze.
Can you help me
Click to expand...
Click to collapse
Do a hard reset yes. I had the same problem once and this helped me.
Hard reset= hold both selection button next to green and red button.
Keep them push down and switch on your Artemis. Afterwards you will get a question. To proceed is pushing the green key.
Your Artemis will be restarted again with all basic (use lost all your contacts but you still be able to activesync them back if you did make a backup)
**good luck**
Hard reset= hold both Left&Right button + Reset button (lower left)
An rainbow screen will appear (PDA must be connected on USB)
After, you can flash a ROM again...
Related
I have a issue with my trinity it freezes and i can't use the button to shutdown so i have made a sof reset but it lock on the second splash screen without possibility to launch restore srcreen . if somebody have a way to resolve my problem i listen
I use the Big Black ROM 1.3 with Radio-Rom: 1.46.30.11
Thanx in advance
Hard reset?
Reload original ROM
krustyx64 said:
I have a issue with my trinity it freezes and i can't use the button to shutdown so i have made a sof reset but it lock on the second splash screen without possibility to launch restore srcreen . if somebody have a way to resolve my problem i listen
I use the Big Black ROM 1.3 with Radio-Rom: 1.46.30.11
Thanx in advance
Click to expand...
Click to collapse
Reload original ROM then load your cooked one again
krustyx64 said:
I have a issue with my trinity it freezes and i can't use the button to shutdown so i have made a sof reset but it lock on the second splash screen without possibility to launch restore srcreen . if somebody have a way to resolve my problem i listen
I use the Big Black ROM 1.3 with Radio-Rom: 1.46.30.11
Thanx in advance
Click to expand...
Click to collapse
Try this link... It might help
http://forum.xda-developers.com/showthread.php?t=308691&highlight=splxploit
This process that I describe bellow, is the one I use. It has been proven to be fail safe. Never had any problems, and never have most of the bugs other users claim to have with their devices.
It consists of first cleaning completly the device, before flashing it with the new rom, and making imeditaly a hard reset just after its installed, and before it makes its first boot.
Here it goes (read carefully before- I'm not responsible if you damage your device):
1-Hard reset
2-Hard reset again, but now, instead of pressing "OK", remove the battery, sim card and sd card.
3-Let the phone rest 1 or 2 minutes
4-Insert the battery again
5-Press the buttons "Camera", "Power" and insert the pen on the reset button, all simultaneously.
6-Keep pressing, until the image with color stipes shows up
7-Connect the pda to the pc
8-Re-flash the device
9- After it reached 100%, it will turn off the display. When this happens, disconnect it from the PC, and make a hard reset.
10- Make a hard reset again, but now, instead of pressing "OK", remove the battery
11-Let it rest for 1 or 2 minutes
12-Insert the sim card, battery and sd card in the pda
13-Turn the pda on, by inserting the pen in th reset button
14- Enjoy your new rom
Bye
thanx that works for me
works for me too!
I recently flashed my opal to wm 6.5 and it worked perfectly fine. Yet today when I tried to install a software which would help display chinese character, after reboot, it got stuck in the smart mobility screen. I have tried hard reset and it didnt work. HELP ME!!!
you can still hard reset it in that state... do the usual hard reset, press both green and red buttons at the same time and with the stylus press the reset button at the back and release it. don't release the green and red buttons yet, release it when you see the instruction "This operation will delete all your personal data blah blah"... then just follow the on-screen instructions.
If TheRem's solution doesn't work you can reset the phone while holding down the Volume down key and it will take you to the SPL (tri color screen). from there you can plug in your phone to USB and flash PhamQuangs ROM again.
Double Post
Closed.
Dave
Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh
aneeshnr said:
Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh
Click to expand...
Click to collapse
i don't think u can save ur contacts now
just hard reset ur device but all data will be lost.
How to do the hard reset? please tell me.
no way to save data?
Hi,
I searched google and got the method to hard reset.
-------------
To perform a hard reset (Full Reset) press and hold the left SOFT KEY and the right SOFT KEY, and at the same
time, use the stylus to press the RESET button at the middle left side of your device.
Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
This operation will delete all your personal data, and reset
all settings to manufacturer default. Press Send to restore
manufacturer default, or press other keys to cancel.
Release now the two SOFT KEYs, and then press the TALK (Send) button
---------------------
But when I press the reset button phone restarted but nothing siplayed as mentioned above. Again it went to windows screen and hung there! Cant even do hard reset? What can I do now? Please hlep.
It is ok now. thanks
aneeshnr said:
It is ok now. thanks
Click to expand...
Click to collapse
its nice to hear that ur device is working .
enjoy!!
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
sanmukhsingh said:
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
Click to expand...
Click to collapse
which rom u have updated??????????
hi deepav84,
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button, nothing shown in USB in PC. but result is same...
please help how i can recover my device.....
I desperately need an alternative way to hard reset my hd2. Holding the up down button and shortly pressing the on/off button just switches the phone on. No reset. btw I cant start up normally so the software approach doesn't wort either.
Peter65nl said:
I desperately need an alternative way to hard reset my hd2. Holding the up down button and shortly pressing the on/off button just switches the phone on. No reset. btw I cant start up normally so the software approach doesn't wort either.
Click to expand...
Click to collapse
Use the reset button on back whilst holding up/down buttons
a few people have commented on the difficulty of getting both up and down pressed correctly.
I find I get a much better press with the battery cover off, and I press one first, then the second.that way you can feel them connect individually.
Why don't you guys use the build in software to hard re-set the devise.
1] Press Star Icon
2] Press Setting Icon
3] Press System Icon
4] Press Clear Storage Icon
That should start a hard re-set on device and re-store everything back to original configuration.
maniep said:
Why don't you guys use the build in software to hard re-set the devise.
1] Press Star Icon
2] Press Setting Icon
3] Press System Icon
4] Press Clear Storage Icon
That should start a hard re-set on device and re-store everything back to original configuration.
Click to expand...
Click to collapse
why don't you read the opening first again?
the dude can't use the software approach because his windows won't start, remember?
what about using task 29 or the reflash original splash screen while its doing its thing you can use both hands to hold the vol buttons, other than anything else suggested i dont thinj there us another way to hard reset other than reinstalling your rom maybe fix the software wipe storage app.
That works!
11calcal said:
Use the reset button on back whilst holding up/down buttons
Click to expand...
Click to collapse
Thanks, finally got the thing going again.
I have the same exact problem. None of these methods are working for me. Is there anthing else I can do?
Same for me. Locked out of the phone completely. When it boots it only gets as far as the O2 start up screen and doesn't get any further. Hard and soft reset do nothing. Have tried all suggested here already.
When I get to the screen where I'm prompted to press Volume up to restore, it goes straight to 'restore completed' in a fraction of a second, then back to the start up screen when I press Volume up again.
Need help as I now have an HTC paperweight and no phone!
sonicuk said:
Same for me. Locked out of the phone completely. When it boots it only gets as far as the O2 start up screen and doesn't get any further. Hard and soft reset do nothing. Have tried all suggested here already.
When I get to the screen where I'm prompted to press Volume up to restore, it goes straight to 'restore completed' in a fraction of a second, then back to the start up screen when I press Volume up again.
Need help as I now have an HTC paperweight and no phone!
Click to expand...
Click to collapse
Been using magldr? Cos hard resetting with magldr installed just affects magldr, hence a very short reset time that does nothing.
samsamuel said:
Been using magldr? Cos hard resetting with magldr installed just affects magldr, hence a very short reset time that does nothing.
Click to expand...
Click to collapse
No, I don't even know what that is. I'm not very technical and all I had installed was Cookie's Home Tab Editor.
I have the same problem.
My HTC is blocked ( the WM "forgot" the password that I set - a common problem ), so I have to do a Hard Reset that doesn't start.
I can't reflash or do anything else ( as told here ) without instaling HSPL first. As this can only be installed by the Active Sync, and Active Sync doesn't connect to blocked phones, I can't do anything else...
Is there a way to do anything else with only a new ROM in the sd card ? Or I REALLY have to install HSPL first ?
Thanks,
Leo
leodino said:
Is there a way to do anything else with only a new ROM in the sd card ? Or I REALLY have to install HSPL first ?
Click to expand...
Click to collapse
It is possible to be stitched from a SD-card without reinsertion HSPL. It is desirable to stitch official ROM
It is desirable SD-card to format a feather an insertion.
Just loaded another keyboard cab and suddenly on soft reset/reboot the phone has frozen at the HTC logo and the screen showing the RGD info... won't reboot easily and takes many attempts to get back to this screen.. but will go no further.
So to do a search, what keywords should I be using or does anyone recognise this and have an answer.. have tried reset, battery out but nothing is working, the screen is just locked the screen mention above.
Using Laurentius26 GoldEdition V2.1 rom and was loading Touch-Keypad.Cab..
It is not connecting to the pc, so I can't reflash it at this time..
if you're phone wont boot since you installed this then looks like a hard reset is on the way mate sorry, you could try boot without mem card but doubt that will make a difference
Could you quickly remind me of the sequence for hard reset, red reset button doesn't seem to do a lot and I do have everything backed up so its not a problem... cheers.
press and hold both volume buttons and tap the power button. Keeping holding both volume buttons until it asks you if you want to factory reset the device. When it does tap volume up and it will then go off and do it's thing.
if the crash was the first time you had soft reset since youi installed the cooked rom, (even if you had been using it a while) it could be a mismatched radio. (Sometimes the rom/radio mismatch doesnt show till the first restart.)
Look at the R on the boot screen, if it has .51. in the version, then flash a new radio.
Thanks for all the help.. have managed to recover, restart and reflash, then reload, so we are all sweet now.. cheers..