[Q] LEO70 need to be changed to HTC HD7 T9292? - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

[Q] LEO70 need to be changed to HTC HD7 T9292? - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

Someone told me that if you go to settings and scroll down to about. If it says LEO70 your market place isnt gunna work. But you can change something in the registry to fix it and change the name. If this is true, how do i do it? Can someone link me to a thread or a video.

TrevorMcCauley said:
Someone told me that if you go to settings and scroll down to about. If it says LEO70 your market place isnt gunna work. But you can change something in the registry to fix it and change the name. If this is true, how do i do it? Can someone link me to a thread or a video.
Click to expand...
Click to collapse
Thats all true. Everything you need to know is found in the first sticky post up top... theres tutorials on activating it in there.

All you need is this tutorial..
http://forum.xda-developers.com/showthread.php?t=912218
I recommend using TOMS Deployer to send the xaps to phone.
http://forum.xda-developers.com/showthread.php?t=908300&page=2

Hi. download this XBMOD,file deployer. Unzip and put on you desktop. Now start up your application Deployer (or Toms Deployer). Make sure phone is not in sleep mode. When the application deployer on your desktop has finished deploying, then go to the menu screen on your phone. You must have Touchxplorer still in there? If not put that in as well. OK here goes, Scroll to near the bottom until you can see XBMOD.Files.Deployer. Now tap that with your finger, it will open up, you can now see the CustClear.provxml, OK. Right now using the back arrow key on your mobile,push once and now you are in the menu again.OK now push the TouchXplorer, you will see yellow files there. You need to open my documents (Tap it twice), then you need to open the My Ringtones folder(Tap it twice). Can you see the CustClear.provxml file (Yes) OK now touch that until highlighted. then at the bottom of that screen, use your finger to push it up, or touch that 3 little full stops... scroll until you see the copy option. Now touch the copy. OK Just use the back arrow key again (Twice) until you come back to My Device. Scroll it up a bit until you see the yellow Windows folder. Now tapit twice untilthat opens.It will take a bit of time, but once you see it open with yellow files, then go to the bottom of you screen and tap the 3 little ... again. scroll until you see paste.OK Hit the paste, Thats it. Back out of the settings using the back arrow button. go to the about screen, and it should now show HTC HD7 T9292. If so then you have Cracked it.(IF not, do it again slower this time?) now go to hotmail and try logging in. It should fail, and then you touch the error message, it now shows the activation screen. now put the codes in, re log into your account..Job Done.

russpattaya said:
Hi. download this XBMOD,file deployer. Unzip and put on you desktop. Now start up your application Deployer (or Toms Deployer). Make sure phone is not in sleep mode. When the application deployer on your desktop has finished deploying, then go to the menu screen on your phone. You must have Touchxplorer still in there? If not put that in as well. OK here goes, Scroll to near the bottom until you can see XBMOD.Files.Deployer. Now tap that with your finger, it will open up, you can now see the CustClear.provxml, OK. Right now using the back arrow key on your mobile,push once and now you are in the menu again.OK now push the TouchXplorer, you will see yellow files there. You need to open my documents (Tap it twice), then you need to open the My Ringtones folder(Tap it twice). Can you see the CustClear.provxml file (Yes) OK now touch that until highlighted. then at the bottom of that screen, use your finger to push it up, or touch that 3 little full stops... scroll until you see the copy option. Now touch the copy. OK Just use the back arrow key again (Twice) until you come back to My Device. Scroll it up a bit until you see the yellow Windows folder. Now tapit twice untilthat opens.It will take a bit of time, but once you see it open with yellow files, then go to the bottom of you screen and tap the 3 little ... again. scroll until you see paste.OK Hit the paste, Thats it. Back out of the settings using the back arrow button. go to the about screen, and it should now show HTC HD7 T9292. If so then you have Cracked it.(IF not, do it again slower this time?) now go to hotmail and try logging in. It should fail, and then you touch the error message, it now shows the activation screen. now put the codes in, re log into your account..Job Done.
Click to expand...
Click to collapse
Great little tutorial, but i still cannot change the model to HD7 I have done these steps over a dozen times and cannot change the model tried resetting phone re-installing zune - locking/ unlocking again- any thoughts? any other way to do it?

Zedbed, Trevor,
I might be wrong about it showing before registering? Try registering, and see if it has changed. No problem if it shows you LEO7, as you have not used up your activation key.
Give that a try and let me know, and i will change my posting.
Russ

russpattaya said:
Zedbed,
I might be wrong about it showing before registering? Try registering, and see if it has changed. No problem if it shows you LEO7, as you have not used up your activation key.
Give that a try and let me know, and i will change my posting.
Russ
Click to expand...
Click to collapse
Ive already registered and typed in my activation key and still said LEO70.

TrevorMcCauley said:
Ive already registered and typed in my activation key and still said LEO70.
Click to expand...
Click to collapse
Did you do the guide I linked you to?
Hard reset your phone and do everything in the guide form begining to end, Do not skip and do not do it on your current setup.
Start a fresh.
To hard reset hold volume up/down when you see the 1234 on magldr and keep holding them till the DFT screen has changed to white screen with instructions.

TrevorMcCauley said:
I still did all of that and it didnt work.
Click to expand...
Click to collapse
You may be using the wrong custclear.provxml file! The same thing happened to me and I couldn't change LEO70 to HD7 until I went to this thread http://forum.xda-developers.com/showthread.php?t=911579 download the toolkit that's in the first link you see, and used the XBMODDeployer.xap that's in the toolkit.
Copy to ringtones, copy to Windows folder in WP7 & use Connection Setup to provision as usual. Only by doing these steps will you be able to see HD7 when you go to the about screen. If that doesn't work, hard reset and try again.

staypaidtre said:
You may be using the wrong custclear.provxml file! The same thing happened to me and I couldn't change LEO70 to HD7 until I went to this thread http://forum.xda-developers.com/showthread.php?t=911579 download the toolkit that's in the first link you see, and used the XBMODDeployer.xap that's in the toolkit.
Copy to ringtones, copy to Windows folder in WP7 & use Connection Setup to provision as usual. Only by doing these steps will you be able to see HD7 when you go to the about screen. If that doesn't work, hard reset and try again.
Click to expand...
Click to collapse
That's the tutorial I used before. But I just did a hard reset and did the process over, and now it works Thank you all very much!

russpattaya said:
Zedbed, Trevor,
I might be wrong about it showing before registering? Try registering, and see if it has changed. No problem if it shows you LEO7, as you have not used up your activation key.
Give that a try and let me know, and i will change my posting.
Russ
Click to expand...
Click to collapse
This worked for me.. Thanks for that Great post.
Neil.

Also run connection setup once you have finished it all. This executes the prox file. Go to HTC apps to download the connection setup app
Sent from my HTC HD2 using XDA App

Hi, I activated my phone using an official code. However I am still not able to unlock the device. This might be a stupid question, but Is it nesecary to unlock the phone in order to change the name using xbmod deployer and download apps from the market.
Because without unlocking I was at least able to use live mail.

Related

XDA Mini S Phone operation problem

Hi, I have recently bought the 02 XDA Mini S (UK edition) off o2.
I am havin the following problem:
If I turn on my phone and let it load at the today screen:
1. use normal programs such as file explorer, IE
2. Then open up phone (so it shows the keyboard, start> Phone)
3. When I go into task manager to close programs that I have previously opened the tasks have no text but have a picture next to them. if i select say a program that has the file explorer sign next to it and then select switch to it will open a different program, for example IE or the phone keypad to dial numbers
4. If i close all normal programs in ther i can then move down and select programs that appear not to be there, for example the screen is white but something is selected because there is a blue selection box around that item.
5. I can close all programs fine, but then if i go into Start > phone, nothing seems to happen. i can get into the phone option through the contacts menu but if i press the "keypad" left soft key nothing seems to happen.
I have identified that when i go into task manager and then click Menu > View > change mode a task named " cprog.exe" has a title phone when the phone keypad is open. When i end the phone task this title of phone disappears.
I have tried running a new task to get it to open but nothing happens. I took the phone to several mobile shops and showed the blokes in there. generally they have all said that it appears to be a glitch in the software and that I should ask for a replacement.
One of my mates has one and he has the same problem so i think it could be a problem across all the XDA Mini S's does anyone else have this same problem. Can you let me know how to over come it (So far my only way of overcoming this problem is to turn the phone off, and then on again to acess the phone keypad again but this is very frustrating)
Cheers all

was having the same problem myself i think its something to do with task manager closing down key pad.
do a google for magic button and use that to close down running programs instead of task manager should sort it out.

cheers mate, is there any that you can recomed (ie the one that you have installed yourself) I don't want to muck up the phone.
cheers

here you go.since i started using this i have not had the keypad problem.
http://www.trancreative.com/mb.aspx
hope this is what you are looking for.[/code]

sorry link does not work i`ll try again;
http://www.trancreative.com/mb.aspx

ahh cool mate, your a life saver! can i easily uninstall this if i wish to, how would i go about it!
cheers for all you help

once its installed, how do i open this to close selected programs? cheers

use memory manager)
you're shutting down the phone app. don't shut it down or better still use settings/system/memory/running programs and stop what you want or stop all. you don't need to download stuff. it's been covered here before.

How to bring back auto screen lock?

Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..

wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Sorry mate - no answer for you, but a question.
I'm about to upgrade to 1.48. Does that get rid of the auto lock for everyone then, or is it maybe a problem that you're having and others aren't? It's actually something that would make me think twice about upgrading!

wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
What do you mean you lost it ?? Just press the rightmost end button hard and you have a menu:
Power off
Lock Device
Set vibrate
Terminate Data Connection
This is default in rom [email protected]@@

You need to press & hold now. Before, you needed only to press it.

Let me get this straight...
If you press the end call button (just briefly) to put the phone in standby, when you press it again, do you get the lock screen??

Ahh that sucks, I want the old setup back. Any ideas?

I've just finished installing 1.48, and it works exactly the same as it previously did (for me).

wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Start reading from this page

Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.

I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?

just install BsB Tweaks 1.2 and enable this option!
btw. this is a very usefull option

crazyman1 said:
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I can confirm that this exact thing happened for me. I couldn't open an email, so I locked it from the start menu, unlocked it, and could immediately open the email.

hbc said:
Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.
Click to expand...
Click to collapse
Not for me :-(

crazyman1 said:
I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I had the same issue and installing net3.5 or bsb did not fix it. I too pushed start then the soft key "lock" (in lower left corner of screen) and both my email and lock issue was fixed. BUT it came back two times today, I think it had to do when I installed a new program, not every time, but I fixed it the same way. This has to be a bug.

greatcapp said:
You need to press & hold now. Before, you needed only to press it.
Click to expand...
Click to collapse
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom

mobile88 said:
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom
Click to expand...
Click to collapse
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".

greatcapp said:
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".
Click to expand...
Click to collapse
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.

To fix this problem and get back the auto lock option....do the following:
with any registry editing software:
HKEY_CURRENT_USER
Control Panel
Keybd
DefaultKeyLock --------> change value to 1

johncmolyneux said:
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.
Click to expand...
Click to collapse
Ok, sadly, the start, then lock workround isn't working for me. Just pressing the end key, turns off the screen, but doesn't lock it any longer. I'm trying to figure out how to get the .dll into the windows folder (as advised from the other thread). But I can't seem to do it. I can move the .dll file onto the handset, but then can't see it to move it to the windows folder. And I can't put it directly into the windows folder on the handset, as I can't see it from my desktop.

Activating "Auto Lock" from within BsB Tweaks seems to have sorted the issue for me

Touch Dual with screen alignment problem

I have problem with my Touch Dual. When I start the phone I get the alignment screen I press the cross and it moves to next corner. But when all is done it starts again I cant came thru this screen.
If I press Windows buttom I get the start menu but when I select one of them the phone goes back to welcome menu.
I have tried with hard rest with no success. I have search in this forum but I cant find any similar faults. Any hints please.
Borje

Borcla said:
I have problem with my Touch Dual. When I start the phone I get the alignment screen I press the cross and it moves to next corner. But when all is done it starts again I cant came thru this screen.
If I press Windows buttom I get the start menu but when I select one of them the phone goes back to welcome menu.
I have tried with hard rest with no success. I have search in this forum but I cant find any similar faults. Any hints please.
Borje
Click to expand...
Click to collapse
Can you tell us more about your phone, rom, radio.
Regards

you have to replace the touch screen or the flex cable...

Rataplan said:
Can you tell us more about your phone, rom, radio.
Regards
Click to expand...
Click to collapse
My phone is as follows:
R1.65.28.25
G25.98.40.07h
D2.09
If I press windows buttom I get the list with all program but when I select one
I allweays get back to welcome screen.

i have the same problem, i already bought and changed flex and touch panel, but i didn't succeded in solving the problem.
i read on the forum there's a way to bypass screen aligning and to install a preformatted aligning setting , is there a way to do this on the touch dual too?

Need help !!!!!
hi guys i cant use this Remote Screen Alignment for my HTC nike 100 cant download the calibration file or tell how to skip screen alignment other way

Use this
i dont know this but use it and tell me how to do it
I attached the file.

galass said:
i dont know this but use it and tell me how to do it
I attached the file.
Click to expand...
Click to collapse
I have tried this program but it not works for me. It just told me following msg when I press SKIP
" An error occured while trying to perform the operation"
Borje

Borcla said:
I have problem with my Touch Dual. When I start the phone I get the alignment screen I press the cross and it moves to next corner. But when all is done it starts again I cant came thru this screen.
If I press Windows buttom I get the start menu but when I select one of them the phone goes back to welcome menu.
I have tried with hard rest with no success. I have search in this forum but I cant find any similar faults. Any hints please.
Borje
Click to expand...
Click to collapse
I have the same "issue" with Insomnia ROM.
Installed it and the alignment restarted itself.
I tried it 5-6 times then it closes. Same thing happens when Screen alignment is launched from the system tools.
Did you try to do it quite often? (more than 6 times in a row)

galass said:
i dont know this but use it and tell me how to do it
I attached the file.
Click to expand...
Click to collapse
thanks very very much very helpfull program now i can use my htc

Lock screen not showing up anymore ... ?

My lock screen was working fine (I would press the red button and it would lock it... same as stock)...then I accidentally installed dinik lock screen and uninstalled it,..now my HD2 does this - when I press the red button it locks it, but its not the lock screen anymore -it shows the last screen I had open and it says "unlock" on the bottom left...now the problem is when I press any button (even on accident) it unlocks it -leaving me calling and pressing things I dont even know about while the phone is in my pocket...
anyone else with this issue? any know how I can get it back to how it used to be without any dramatic changes (such as re installing the rom, hard reset etc...?
edit: I reinstalled the dinik lockscreen and it works...but I miss the stock lockscreen, maybe I will try looking for the stock lockscreen cab file to see if that works....but I dont understand -it must have uninstalled it automatically when I first installed the dinik lockscreen.

Check to see if \HKCU\ControlPanel\Keybd\DeviceKeyLock and DeviceLockWhenSuspend are set to 1 in the registry.
Dave

I uninstalled S2U2 and now mine is missing as well.

dmattox said:
Check to see if \HKCU\ControlPanel\Keybd\DeviceKeyLock and DeviceLockWhenSuspend are set to 1 in the registry.
Dave
Click to expand...
Click to collapse
Yes they both are set to 1.
Please elaborate this for me...

I wanted to get rid of the lock functionality, so I set them to 0. I hoped yours had gotten switched, but having 1 is correct. So its another issue.
Dave

erebusting said:
-it shows the last screen I had open and it says "unlock" on the bottom left...now the problem is when I press any button (even on accident) it unlocks it -leaving me calling and pressing things I dont even know about while the phone is in my pocket...
Click to expand...
Click to collapse
yea ive seen this. annoying, cos as you noted any hard button unlocks it.
Happened to me when i was messing with the LS_LockScene_480x800.cpr file, guess it got corrupted.
Heres an original. unzip it, drop it in windows/lockscreen and soft reset.

samsamuel said:
yea ive seen this. annoying, cos as you noted any hard button unlocks it.
Happened to me when i was messing with the LS_LockScene_480x800.cpr file, guess it got corrupted.
Heres an original. unzip it, drop it in windows/lockscreen and soft reset.
Click to expand...
Click to collapse
thank you...

samsamuel said:
yea ive seen this. annoying, cos as you noted any hard button unlocks it.
Happened to me when i was messing with the LS_LockScene_480x800.cpr file, guess it got corrupted.
Heres an original. unzip it, drop it in windows/lockscreen and soft reset.
Click to expand...
Click to collapse
I cannot find this directory ? Nevermind sorry, I found it through my phone, but from my PC's side I could not find it.... ?

on the pc you need to open file manager click tools folder optionssecond tab (not at a pc so can't say exactly what it says) and tick show hidden files and folders, un tick hide file extensions, tick show projected operating system files.apply, and choose apply to all folders. now you will see everything.
to be honest its really slow browsing the phones windows folder from the pc. I just copy to sd card then move it from the phone.

[Q]Screen Problem

Hey,
I have an HTC HD and love it. But I have a problem with screen.
When I push at the middle of the screen, it perceives the command wrong and acts like i push at the bottom of the screen. And when I push start button, it acts like I push the clock.
Aligning the screen from Settings menu works but only for 5 or 10 minutes, then it break itself down again.
What can I do ?
Thank you !

Knuckled said:
Hey,
I have an HTC HD and love it. But I have a problem with screen.
When I push at the middle of the screen, it perceives the command wrong and acts like i push at the bottom of the screen. And when I push start button, it acts like I push the clock.
Aligning the screen from Settings menu works but only for 5 or 10 minutes, then it break itself down again.
What can I do ?
Thank you !
Click to expand...
Click to collapse
try using this CalibrationData maybe it could help

I do not know how to use it

Knuckled said:
I do not know how to use it
Click to expand...
Click to collapse
you simply extract to your device and import the registry file that exists in the package
if the post is useful to you, press the thanks button

HTC HD Screen Problem
Yo Mate. Thanks alot it works. I have been trying to solve this problem few months back but fail. SAtumbled upon this tread and Ta Da. You've made my day. Hope it'll last.
THANK YOU THANK YOU THANK YOU

Help
ok maybe I sound stupid, but how the F***K to use it.
I have the same problem as mentioned above.
I downloaded it on to my pc then I put the zip file on my Touch HD straight into my root and even on my sd-card.
Whats next to do, when I clic on it it goes to zip mobile, at least in left corner of the screen it says so. I see a + mark and when I clic on it it colapse and then an other + shows up (CalibrationData folder) and then beneath CalibrationData.reg file.
So any smart guy or girl can help me out.
Grtz xxxware

There must be something in the air(waves)!
See: http://forum.xda-developers.com/showthread.php?t=1075957
I've had nothing like this happen before, and not heard of it happening before, then all of a sudden three instances (like a bus).
I'll try this calibration data but my phone would let me calibrate now it won't, it's just gotten worse!

Database Users

welcome