Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Sorry mate - no answer for you, but a question.
I'm about to upgrade to 1.48. Does that get rid of the auto lock for everyone then, or is it maybe a problem that you're having and others aren't? It's actually something that would make me think twice about upgrading!
wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
What do you mean you lost it ?? Just press the rightmost end button hard and you have a menu:
Power off
Lock Device
Set vibrate
Terminate Data Connection
This is default in rom [email protected]@@
You need to press & hold now. Before, you needed only to press it.
Let me get this straight...
If you press the end call button (just briefly) to put the phone in standby, when you press it again, do you get the lock screen??
Ahh that sucks, I want the old setup back. Any ideas?
I've just finished installing 1.48, and it works exactly the same as it previously did (for me).
wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Start reading from this page
Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.
I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
just install BsB Tweaks 1.2 and enable this option!
btw. this is a very usefull option
crazyman1 said:
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I can confirm that this exact thing happened for me. I couldn't open an email, so I locked it from the start menu, unlocked it, and could immediately open the email.
hbc said:
Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.
Click to expand...
Click to collapse
Not for me :-(
crazyman1 said:
I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I had the same issue and installing net3.5 or bsb did not fix it. I too pushed start then the soft key "lock" (in lower left corner of screen) and both my email and lock issue was fixed. BUT it came back two times today, I think it had to do when I installed a new program, not every time, but I fixed it the same way. This has to be a bug.
greatcapp said:
You need to press & hold now. Before, you needed only to press it.
Click to expand...
Click to collapse
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom
mobile88 said:
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom
Click to expand...
Click to collapse
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".
greatcapp said:
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".
Click to expand...
Click to collapse
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.
To fix this problem and get back the auto lock option....do the following:
with any registry editing software:
HKEY_CURRENT_USER
Control Panel
Keybd
DefaultKeyLock --------> change value to 1
johncmolyneux said:
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.
Click to expand...
Click to collapse
Ok, sadly, the start, then lock workround isn't working for me. Just pressing the end key, turns off the screen, but doesn't lock it any longer. I'm trying to figure out how to get the .dll into the windows folder (as advised from the other thread). But I can't seem to do it. I can move the .dll file onto the handset, but then can't see it to move it to the windows folder. And I can't put it directly into the windows folder on the handset, as I can't see it from my desktop.
Activating "Auto Lock" from within BsB Tweaks seems to have sorted the issue for me
Related
Hi, I usually slide open just to power on the phone.
So, I would like nothing to happen when I slide the phone open when on the today screen..
Does somebody have an idea how to do this?
Are you talking about the Keypad QuickTasks?
You can easily find the option on Start -> Settings -> System Tab -> Keypad QuickTasks
Yes, I mean the dialpad quicktasks.
When this is disabled I get the dialer instead.
As a "workaround", you could just press the red "hangup" button after opening the phone to return to the home screen...
Royan
Royan said:
As a "workaround", you could just press the red "hangup" button after opening the phone to return to the home screen...
Royan
Click to expand...
Click to collapse
this annoys me too, i may write a small program that looks for the keyboard opened event, and minimises the phone program
this annoys me too, i may write a small program that looks for the keyboard opened event, and minimises the phone program
Click to expand...
Click to collapse
That will be cool!
Oh.. I've been using a certain "Yet another lock app" v1.2 or something like that... and I always set mine to lock and suspend everytime I do a right to left sweep (via FTouchFo). And everytime I slide the keypad, it automatically unlocks and nothing comes up; no quicktasks nor phoneapp). I'm not kidding... I don't know if it's a good "side-effect", but that's how it works.
can you post a link or the cab?
I hate the search function!
lostsoul said:
can you post a link or the cab?
I hate the search function!
Click to expand...
Click to collapse
i second this vince!!!Please post the cab!
This is where I found it.
http://forum.xda-developers.com/showthread.php?t=261277
I actually prefer this than any other locking app out there since this app uses the same built-in Device Lock program with a few nice modifications.
Enjoy!
Optional Alternative
I wrote a mortscript file to disable both menus
1. Extract
2. Place "Kill" folder in Program Files
3. Place run.mscr in startup
4. Reset
Enjoy
Simple fix for this
Hi there,
I just got my Niki a couple of weeks ago (with T-mobile in the UK) and this has been bugging me too ever since.
I figured that there must be a registry setting to control this somewhere as the Keypad Quicktasks are able to adjust this behaviour. Last night , I finally found it.
The setting in question is:
HKLM/Software/HTC/Biotouch/ActionScreen/Check
With the Keypad Quicktasks on, it is set to 1. With them off it is set to 0 and will instead launch the phone app.
Simply set it to anything else (e.g. 2) and both the Quicktasks and the phone application are disabled upon sliding open the phone. The active slide event is still recognised and sliding the phone open will still answer an incoming call.
Sweet.
fenallen said:
Hi there,
I just got my Niki a couple of weeks ago (with T-mobile in the UK) and this has been bugging me too ever since.
I figured that there must be a registry setting to control this somewhere as the Keypad Quicktasks are able to adjust this behaviour. Last night , I finally found it.
The setting in question is:
HKLM/Software/HTC/Biotouch/ActionScreen/Check
With the Keypad Quicktasks on, it is set to 1. With them off it is set to 0 and will instead launch the phone app.
Simply set it to anything else (e.g. 2) and both the Quicktasks and the phone application are disabled upon sliding open the phone. The active slide event is still recognised and sliding the phone open will still answer an incoming call.
Sweet.
Click to expand...
Click to collapse
you are a genius, problem solved! 10/10
winwiz said:
you are a genius, problem solved! 10/10
Click to expand...
Click to collapse
Agreed Thanks fenallen
i've come accross a problem - a reset seems to wipe the settings and has reverted to showing the phone screen???
Well it seems to survive a soft reset as well as power cycles with the battery removed so I presume you mean a hard reset, in which case ... isn't that the point of a hard reset?
I would be amazed/worried if it wasn't set back to default by a hard reset.
nope, i am on about a soft reset! i'll try again to see if it keeps the settings this time
Im happy to say it works fine, after i made a soft reset.
power on/off
it´s posible to change the action of the power buton hardkey?
thanks
I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.
what programs are you using? If you hold down the end key for a second, the phone will lock. Maybe you are accidentally bumping it when you put it in your pocket or case.
Sorry I wasn't more specific... I'm running ttran's OpenTouch 3.0. when I turn on the screen (using the power button) I need to press unlock twice to get to the main menu. It's annoying and I'd like to get rid of it. idk... I didn't change anything and it just randomly started happening yesterday. help?
I agree with you PharmacySchool...I'm running Ttran's 3.0 ROM myself and the "locked" feature pop-up on me this afternoon, out of the blue. It is very annoying and I'm not sure what caused it to start happening. Was getting an address out of the contacts list, X'ed out of contacts once finished, clicked the power button to turn the screen off...next time I went to use the phone, it magically was locked and has been since. A real pain to have to hit the unlock button twice just to use the phone. Have played around a little with it, but no success on correcting the problem yet.
Make sure you're not overclocking the phone. This can cause lock ups if the CPU overheats or if it doesn't get the required voltage or for other reasons.
The lock I'm referring to and I believe PharmacySchool...is like a "key lock". How some phones have an option to lock the keys so it can't accidentally call someone if numbers get pressed by mistake or while in your pants pockets. Nothing to do with the CPU or it being overheated. All you have to do is press the button to turn the screen light off and instantly turn it back on...it's locked. You have to hit the "unlock" button on the bottom left hand corner and the tap the unlock button on the screen. After doing such...you can once again use your phone.
I have the answer!!!
pharmacyschool said:
I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.
Click to expand...
Click to collapse
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.
A_C 's S2U2 has a slide to answer feature..... You should check it out.
nextpimp said:
A_C 's S2U2 has a slide to answer feature..... You should check it out.
Click to expand...
Click to collapse
I've installed S2U2-0.2-WM5 with Touch It v2.3 and had problems. I think I remember it having a slide to answer but I also remember it answering with the green button as well. Maybe there was a way to disable it but I don't know how.
Does it work better Open Touch v3.0. because thats what I'm running now.
WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.
midas1200 said:
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.
Click to expand...
Click to collapse
Midas, that fixed it. thanks a lot. I owe ya one.
nextpimp said:
WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.
Click to expand...
Click to collapse
NICE!!!!! Works good so far. Now I won't be divorced! LOL
Hi,
After a couple of days playing with the HTC touch HD I noticed that I can not lock the device anymore by long pressing the end key. I have looked into the settings and it clearly states that long pressing the end key should lock the device.
whenever I long press the key I see the some screen refresh but the device is not locked.
If I switch off Touchflo3D and show the device lock on the today screen, then the device gets locked. Could this be a bug in touchflo3D?
I would hate to have to perform a hard reset just to fix this issue...
If anyone knows a solution, please let me know.
Edit: well, I found the reason why this happens. Once you setup a password for your device, it stops locking the device using long press end button. It sucks, but I can live with it...
Looks like a hardreset is the only way to go.
Lucas0511 said:
Looks like a hardreset is the only way to go.
Click to expand...
Click to collapse
If I perform a hard rerset, will I still have all the applications that came standard with the like touchflo3d and google maps? or will I need to reinstall some of the applications myself?
You will have them. It will reset to factory settings, original ROM plus all installations HTC chose to put on the HD.
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...
david-v said:
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...
Click to expand...
Click to collapse
yes that one works when you turn touchflo off but the touchflo end key press never worked.
Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo
cojones said:
Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo
Click to expand...
Click to collapse
You can configure it. standard it will lock your device, but you can also choose to show a choice list.
david-v said:
You can configure it. standard it will lock your device, but you can also choose to show a choice list.
Click to expand...
Click to collapse
A-ha...found it, they moved it to the Button setting (not one for reading the manual). Now...what about the 'Lock all buttons on device lock' setting?!
indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
This is the same with me and I've not touched push e-mail or exchange server settings. I've only had the phone for 36 hours so not done much at all. The first thing I went to try and do was lock the phone and it didn't work. I'm reluctant to do a hard reset as it didn't work out of the box.
Did you try a hard reset? Did it solve the problem?
no i didnt try a hard reset,didnt think it was worth it just try to get the lock to work.
Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?
spikeysas said:
Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?
Click to expand...
Click to collapse
I performed a hard reset and then it worked again. But after setting up exchange, it stopped working. The device lock on the today screen still works though, but not from touchflow3d
I decided to go for it and do a hard reset. The device lock still didn't work. All I had done was follow the original setup screens after the reset. During this I set up Lock with a simple PIN and to prompt for it after an hour of inactivity. If I remove the settings from Lock I can then use Device Lock on long press End key but I can't use both.
This is rather frustrating as I had simple PIN (paranoid as had an Ef stolen a few months ago so at least this would stop them accessing any info stored directly on the device as they would have to do a hard reset to clear it) and Device Lock set up on my Elf which worked absolutely fine.
Has anybody managed to get both working together on the HD? I use the Device Lock to stop any buttons being pressed when I don't want them to be and the PIN so it's harder for people to access any of my personal info if the phone is stolen (not that I intend for this to happen again!). I really would like both to work together!
Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.
spikeysas said:
Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.
Click to expand...
Click to collapse
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.
david-v said:
Edit2: well, I found the reason why this happens. Once you setup exchange server for push mail, it stops locking the device using long press end button. It sucks, but I can live with it...
Click to expand...
Click to collapse
I have Exchange with Push and still works for me.
Steve James said:
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.
Click to expand...
Click to collapse
Thanks for the reply. I guess that confirms that it's not specific to my device! As I mentioned before both functions did co-exist quite happily on the original Touch (Elf) so it is possible. I wonder if it is related to the newer style TouchFlo3D and if anyone experienced the same issues on the Diamond or the Touch Pro?
I hope it is something that could be sorted with "tweaks" to certain files or registry entries. If anyone finds out how to solve it I for one would be very grateful!
tnyynt said:
I have Exchange with Push and still works for me.
Click to expand...
Click to collapse
Did your exchange policy force you to setup a password? it appears to be the problem. When you setup the device initially with a password, then you cannot lock the device anymore using the long press of the end button. Device lock in today screen always work, the problem is the long press of end button, that stops working as soon as you have a passwaord set up.
Sometimes when I enter a new task or appointment and I want to save it, the ' Ok' icon on top of the screen has disappeared. Only option I have then is to cancel and try again....quite annoying, anyone else experiences this - or has a fix ? Thanks in advance...
The OK icon is sometimes dimmed (as if disabled) but it does still work if you press it.
JohnPM said:
The OK icon is sometimes dimmed (as if disabled) but it does still work if you press it.
Click to expand...
Click to collapse
I'm not so sure that's the case, but we'll see within one or two days !
Yes, it does sometimes dim / disappear when you've clicked away from it. Just tap on the area where it usually is and it'll reappear.
Prof. Yaffle said:
Yes, it does sometimes dim / disappear when you've clicked away from it. Just tap on the area where it usually is and it'll reappear.
Click to expand...
Click to collapse
Well, forget it...just 5 mins ago it happened again. But no matter if I press softly or firmly, the HD doesn't respond so it's back to cancel and try again :=(
I'm just thinking: I recently disabled the WM 6.1 option to have the running program list in the right top of the screen. Maybe that is causing my problems.
Does anyone know how to reactivate this setting ?
I looked and searched (a few forums also) and cant find an answer. I have a TMOUS HD2 with their new ROM freshly installed (yesterday) and when I get a text message it will show the message but the only option I have is to "Hide" it. I tried clicking on it and everywhere else but it wont open the message unless I go to "Messages" so is there a reg edit I can do to get it to show "open" instead of hide...Thx...Tj
P.S. I would rather not install any programs but would like to work with what the phone has.
Hmm am I the only one with this problem?
no this isn't exactly a problem. This is a feature that is on the phone where if your at your lock screen or your display screen iss hut off thats what shows when you get to the lock screen. It's so you can view your text and who it's from before you unlock your phone and go into their threaded message.
I'm sure there is a way to disable it via reg but not sure.
sherlockpwnz said:
no this isn't exactly a problem. This is a feature that is on the phone where if your at your lock screen or your display screen iss hut off thats what shows when you get to the lock screen. It's so you can view your text and who it's from before you unlock your phone and go into their threaded message.
I'm sure there is a way to disable it via reg but not sure.
Click to expand...
Click to collapse
OK but I do not have the screen locked. I can see the message and who its from but to open or reply I have to go to messages because the only option is to "hide" it...Tj
as with all things it can glitch. if you have your lock screen disabled but then you hit your right button for end call to turn off the display then touch another button to bring it back it could possible bring that up. I will see if I can find someone that knows the answer.
sherlockpwnz said:
as with all things it can glitch. if you have your lock screen disabled but then you hit your right button for end call to turn off the display then touch another button to bring it back it could possible bring that up. I will see if I can find someone that knows the answer.
Click to expand...
Click to collapse
OK thanks a bunch...Tj