Database Users

Wing locking itself

I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.

what programs are you using? If you hold down the end key for a second, the phone will lock. Maybe you are accidentally bumping it when you put it in your pocket or case.

Sorry I wasn't more specific... I'm running ttran's OpenTouch 3.0. when I turn on the screen (using the power button) I need to press unlock twice to get to the main menu. It's annoying and I'd like to get rid of it. idk... I didn't change anything and it just randomly started happening yesterday. help?

I agree with you PharmacySchool...I'm running Ttran's 3.0 ROM myself and the "locked" feature pop-up on me this afternoon, out of the blue. It is very annoying and I'm not sure what caused it to start happening. Was getting an address out of the contacts list, X'ed out of contacts once finished, clicked the power button to turn the screen off...next time I went to use the phone, it magically was locked and has been since. A real pain to have to hit the unlock button twice just to use the phone. Have played around a little with it, but no success on correcting the problem yet.

Make sure you're not overclocking the phone. This can cause lock ups if the CPU overheats or if it doesn't get the required voltage or for other reasons.

The lock I'm referring to and I believe PharmacySchool...is like a "key lock". How some phones have an option to lock the keys so it can't accidentally call someone if numbers get pressed by mistake or while in your pants pockets. Nothing to do with the CPU or it being overheated. All you have to do is press the button to turn the screen light off and instantly turn it back on...it's locked. You have to hit the "unlock" button on the bottom left hand corner and the tap the unlock button on the screen. After doing such...you can once again use your phone.

I have the answer!!!
pharmacyschool said:
I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.
Click to expand...
Click to collapse
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.

A_C 's S2U2 has a slide to answer feature..... You should check it out.

nextpimp said:
A_C 's S2U2 has a slide to answer feature..... You should check it out.
Click to expand...
Click to collapse
I've installed S2U2-0.2-WM5 with Touch It v2.3 and had problems. I think I remember it having a slide to answer but I also remember it answering with the green button as well. Maybe there was a way to disable it but I don't know how.
Does it work better Open Touch v3.0. because thats what I'm running now.

WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.

midas1200 said:
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.
Click to expand...
Click to collapse
Midas, that fixed it. thanks a lot. I owe ya one.

nextpimp said:
WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.
Click to expand...
Click to collapse
NICE!!!!! Works good so far. Now I won't be divorced! LOL

Device lock no longer working on long press End key (Found reason!)

Hi,
After a couple of days playing with the HTC touch HD I noticed that I can not lock the device anymore by long pressing the end key. I have looked into the settings and it clearly states that long pressing the end key should lock the device.
whenever I long press the key I see the some screen refresh but the device is not locked.
If I switch off Touchflo3D and show the device lock on the today screen, then the device gets locked. Could this be a bug in touchflo3D?
I would hate to have to perform a hard reset just to fix this issue...
If anyone knows a solution, please let me know.
Edit: well, I found the reason why this happens. Once you setup a password for your device, it stops locking the device using long press end button. It sucks, but I can live with it...

Looks like a hardreset is the only way to go.

Lucas0511 said:
Looks like a hardreset is the only way to go.
Click to expand...
Click to collapse
If I perform a hard rerset, will I still have all the applications that came standard with the like touchflo3d and google maps? or will I need to reinstall some of the applications myself?

You will have them. It will reset to factory settings, original ROM plus all installations HTC chose to put on the HD.

this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).

indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...

david-v said:
in my case it was working fine....until it stopped working. Looks like a bug in touchflo3d, because you can still use the default device lock from the today screen. that one works...
Click to expand...
Click to collapse
yes that one works when you turn touchflo off but the touchflo end key press never worked.

Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo

cojones said:
Can someone confirm that you no longer get a choice of action for the Long Press End Key, i.e. it locks the device and that's it. On the diamond you are able to choose an action or choose the display choice list.
Thanks, cojo
Click to expand...
Click to collapse
You can configure it. standard it will lock your device, but you can also choose to show a choice list.

david-v said:
You can configure it. standard it will lock your device, but you can also choose to show a choice list.
Click to expand...
Click to collapse
A-ha...found it, they moved it to the Button setting (not one for reading the manual). Now...what about the 'Lock all buttons on device lock' setting?!

indup said:
this hasnt worked on mine from the moment i got it, so i suppose a hard reset isnt going to fix things (?).
Click to expand...
Click to collapse
This is the same with me and I've not touched push e-mail or exchange server settings. I've only had the phone for 36 hours so not done much at all. The first thing I went to try and do was lock the phone and it didn't work. I'm reluctant to do a hard reset as it didn't work out of the box.
Did you try a hard reset? Did it solve the problem?

no i didnt try a hard reset,didnt think it was worth it just try to get the lock to work.

Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?

spikeysas said:
Has anyone else had the same problem with it not working right from the start and tried a hard reset? If so, did it solve the problem?
Click to expand...
Click to collapse
I performed a hard reset and then it worked again. But after setting up exchange, it stopped working. The device lock on the today screen still works though, but not from touchflow3d

I decided to go for it and do a hard reset. The device lock still didn't work. All I had done was follow the original setup screens after the reset. During this I set up Lock with a simple PIN and to prompt for it after an hour of inactivity. If I remove the settings from Lock I can then use Device Lock on long press End key but I can't use both.
This is rather frustrating as I had simple PIN (paranoid as had an Ef stolen a few months ago so at least this would stop them accessing any info stored directly on the device as they would have to do a hard reset to clear it) and Device Lock set up on my Elf which worked absolutely fine.
Has anybody managed to get both working together on the HD? I use the Device Lock to stop any buttons being pressed when I don't want them to be and the PIN so it's harder for people to access any of my personal info if the phone is stolen (not that I intend for this to happen again!). I really would like both to work together!

Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.

spikeysas said:
Just spoken to CS at Orange and they have no idea if this issue with only able to have either Lock or Device Lock working at any one time is specific to my device or whether everyone is affected. If anybody is able to try and let me know their results I'd be grateful as I don't know yet whether I need to send the phone back as faulty.
Click to expand...
Click to collapse
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.

david-v said:
Edit2: well, I found the reason why this happens. Once you setup exchange server for push mail, it stops locking the device using long press end button. It sucks, but I can live with it...
Click to expand...
Click to collapse
I have Exchange with Push and still works for me.

Steve James said:
Just confirmed that removing the password re-enables the device lock. Nice find!
I am on Vodafone.
I assume that one of the manila files in \Windows is checking a registry entry. I wonder if it is possible to make a change that allows both functions to co-exist.
Click to expand...
Click to collapse
Thanks for the reply. I guess that confirms that it's not specific to my device! As I mentioned before both functions did co-exist quite happily on the original Touch (Elf) so it is possible. I wonder if it is related to the newer style TouchFlo3D and if anyone experienced the same issues on the Diamond or the Touch Pro?
I hope it is something that could be sorted with "tweaks" to certain files or registry entries. If anyone finds out how to solve it I for one would be very grateful!

tnyynt said:
I have Exchange with Push and still works for me.
Click to expand...
Click to collapse
Did your exchange policy force you to setup a password? it appears to be the problem. When you setup the device initially with a password, then you cannot lock the device anymore using the long press of the end button. Device lock in today screen always work, the problem is the long press of end button, that stops working as soon as you have a passwaord set up.

WM6.5 lock screen delay fix

I want to start this threat to put together information in order to sort out why the device lock delay (see below) appears and how to solve it.
wm6.5 device lock app has changed from "tap here and next there" to a slider style like app you know from s2u2.
problem:
device lock is enabled
Code:
HKCU\ControlPanel\BackLight\AutoDeviceLockEnable=1
wake up the device by short pressing the power button
device lock screen is displayed instantly
it takes ~2 seconds until the slider of the device lock screen is activated and can be slided.
if you use device lock it becomes really annyoing.
there are some threads about this like this one, but the solution is not working on a Touch HD.
can anybody sched some light onthe problem why and where it appears or maybe someone already found a solution.
please post any useful information.
please do not post tips like use s2u2 or any other locking app - I do not want to use them.

the only thing i can thing of is use s2u2 or any other locking app

egoist6 said:
please do not post tips like use s2u2 or any other locking app - I do not want to use them.
Click to expand...
Click to collapse
cookiemonster55 said:
the only thing i can thing of is use s2u2 or any other locking app
Click to expand...
Click to collapse
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.

Zoltair Wright said:
cookiemonster, either you didn't read his post or you're a sort of a jerk.
And yes, in response to the poster, I have the same problem.
Click to expand...
Click to collapse
latest build 23001 still has this annoying delay

Iv noticed this too... The biggest annoyance for me is you turn the device on and the backlight isnt very bright, makes it near impossible to see the screen in daylight. Is it possible to have the backlight come on full when you press the power button?

i have this problem too. i think it is a serious bug of wm6.5
just hoping it will be fixed when the official release come out.

god i thought i was the only one, something about my config...
and i was exited about the new 6.5 lock screen,
but then it works like all the other M$ 6.5 sh!t, it doesn't
had to switch away from it

May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219

A1983 said:
May be this help you:
http://forum.xda-developers.com/showthread.php?t=527219
Click to expand...
Click to collapse
thanks for your help - but that was the solution i am talking about in my first post and unfortunately does not work.

also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat

What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too

lemat1 said:
also find this intensely annoying! if you look, on my hd, in the top left corner a small windows flag appears to indicate that the slider is locked, it disappears once the slider is active, and there is a definite exact time out, i dont think its random or a load time
hope this is sorted cos its rubbish!
regards
mat
Click to expand...
Click to collapse
yeah. and with 6.5 23003 onwards in the top right corner an "X" (for close) appears. only when it goes off you can access the slider.
it seems as if an app is started.

pikipirs said:
What I've done that got rid of most of the delays regarding the lock screen on my Xperia:
I got 6 cpr files from my device's /Windows directory: LS_LockScene_xxxxxxx.cpr, LS_AlarmScene_xxxxxxx.cpr and LS_PhoneAlertScene_xxxxxxx.cpr. Get files that fit the resolution of your device, they are in pairs for portrait and landscape
opened each one of them in a text editor (they are XMLs inside)
removed all "ControlSequence" sections from them (those sections are small (like 4 entries) and big (up to 21 entries). These sections are animations of arrows. Arrows will still be there after that, they just won't animate.
uploaded cpr files back to /Windows, overwriting originals
soft-reseted.
Hope it works on your devices too
Click to expand...
Click to collapse
great. that helped a lot!
now the lock screen is flickering shortly and the whole lock screen slides in once more from the bottom to the top but then the slider is instantly accessible.
from a time perspective a great improvement!

update:
basically you can delete the whole layer
Code:
<Layer ID="SlidePath" >
...
</Layer>
which removes the animation of the arrows and the arrows themselves.
do not delete this section if you do not know in which direction to slide the button
however, the delay is still ~1 second. but i think i can live with that allthough it is annoying to wait one stupid second to proceed

the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect

If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.

twopumpchump said:
the delay you get when recieving a call with lockscreen on is caused by the slide to answer feature of alot of the new dialers. it conflicts with the popup call answer screen with wm 6.5. to fix this can find a dialer that doesnt have slide to answer feature. the backlight problem came from backlight.dll in the kaiser, using a new one from stock rom now and it works perfect
Click to expand...
Click to collapse
thanks for your reply. but i also have the delay when simply waking up the device by pressing the power button (without receiving a call)

xternal said:
If you enable the enter a pin number after slide, there is no delay at all. I know this isnt a solution i hate entering a pin. however, i have a felling the pin app is running in the background and thus you dont get the flicker where it flicks from Start menu back to the lock app. Hence if you could create a dummy pin app, it could work to stop the delay.
Click to expand...
Click to collapse
that's true. i replaced LS_SimplePinScene_480x800.cpr with an empty one and allthough not using pinlock, the lock app did not work at all.

What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Not sure if this is at all possible as im not a programmer. Just a thought

xternal said:
What if we designed something where when you slide it calls a mortscript or something and enters 0000+OK to by pass the pin screen (assuming you set pin to 0000). Then you edit the Pin screen so it is just a clear page, so you dont even see the pin screen flash up.
Click to expand...
Click to collapse
good idea. maybe someone can change LS_SimplePinScene_480x800.cpr so that it does not expect the pin from screen but is embedded directly into the cpr file?
can anybody who has a better understanding of cpr files or the lock app give us some tips?
xternal said:
Not sure if this is at all possible as im not a programmer. Just a thought
Click to expand...
Click to collapse
me neither

How to bring back auto screen lock?

Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..

wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Sorry mate - no answer for you, but a question.
I'm about to upgrade to 1.48. Does that get rid of the auto lock for everyone then, or is it maybe a problem that you're having and others aren't? It's actually something that would make me think twice about upgrading!

wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
What do you mean you lost it ?? Just press the rightmost end button hard and you have a menu:
Power off
Lock Device
Set vibrate
Terminate Data Connection
This is default in rom [email protected]@@

You need to press & hold now. Before, you needed only to press it.

Let me get this straight...
If you press the end call button (just briefly) to put the phone in standby, when you press it again, do you get the lock screen??

Ahh that sucks, I want the old setup back. Any ideas?

I've just finished installing 1.48, and it works exactly the same as it previously did (for me).

wackyD said:
Hi all,
Just upgraded ROM to 1.48, but now I have lost the screen lock when you turn the device on! I dont want the phone doing random things in my pocket if a button is pressed..
Click to expand...
Click to collapse
Start reading from this page

Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.

I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?

just install BsB Tweaks 1.2 and enable this option!
btw. this is a very usefull option

crazyman1 said:
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I can confirm that this exact thing happened for me. I couldn't open an email, so I locked it from the start menu, unlocked it, and could immediately open the email.

hbc said:
Start, then press "Lock" appkey in bottom left corner.
After that all ok. End call button now locks the phone.
Click to expand...
Click to collapse
Not for me :-(

crazyman1 said:
I've had the same problem. What was suggested by locking the screen from the Start menu did fix the problem. This has happened a couple of times since installing the 1.48 rom.
I also noticed that I was having a problem where I couldn't open e-mails from the touch flo interface. When I clicked on a message, it would just push down and come back up but not open the message in outlook. This problem was resolved when I fixed the lock screen....has anyone else experienced this as well?
Click to expand...
Click to collapse
I had the same issue and installing net3.5 or bsb did not fix it. I too pushed start then the soft key "lock" (in lower left corner of screen) and both my email and lock issue was fixed. BUT it came back two times today, I think it had to do when I installed a new program, not every time, but I fixed it the same way. This has to be a bug.

greatcapp said:
You need to press & hold now. Before, you needed only to press it.
Click to expand...
Click to collapse
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom

mobile88 said:
Yes this is an additional option. You can still press end button slightly ( or just lightly tap it ) and the screen will lock ( you will see the default "slide" on top ). This no need any tweak and is a default feature in the 1.48 rom
Click to expand...
Click to collapse
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".

greatcapp said:
And, as I answered before. This isn't working for me.
I have to hold the end button, then select "Lock screen".
Before the upgrade in ROM, I could just tap the end button - now that no longer works. I have to hold it, then select "Lock Screen".
Click to expand...
Click to collapse
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.

To fix this problem and get back the auto lock option....do the following:
with any registry editing software:
HKEY_CURRENT_USER
Control Panel
Keybd
DefaultKeyLock --------> change value to 1

johncmolyneux said:
I think he means that when you press the end button the screen turns off. I know it's not actually locking the device, but the screen is off.
From my experience, the start menu lock resets something and allows the lock screen to work. This will work until the phone is restarted, which is when the problem is caused.
Click to expand...
Click to collapse
Ok, sadly, the start, then lock workround isn't working for me. Just pressing the end key, turns off the screen, but doesn't lock it any longer. I'm trying to figure out how to get the .dll into the windows folder (as advised from the other thread). But I can't seem to do it. I can move the .dll file onto the handset, but then can't see it to move it to the windows folder. And I can't put it directly into the windows folder on the handset, as I can't see it from my desktop.

Activating "Auto Lock" from within BsB Tweaks seems to have sorted the issue for me

How to lock Ans/End key

Usually when a call comes and the phone is inside the pouch (good for protection), there are several ways of messing up by accepting or rejecting the call even b4 its completely out of the pouch as blelow:
On screen:
1) U can press the on screen message but which will send an auto sms to the caller and end the call
2) U can press the answer key
3) U can press the ignore key
Off screen (hardware)
4) U press the answer key
5) U can press the end key
Incredibly, all 5 options are simultaneously active. The screen can be locked by S2U2 etc. but I cannot find any option of locking the hardware keys.
Any help will be appreciated

Firstly thanks for Omnia i8000 support on XDA..
Now I feel secure..
Secondly even I'll lyk to disable my hardware keys for call ans/end..
is there a registry tweak or something we can do to disable it..

s2u2 has that option... go settings/phone and u have S2A Hard ans/end key...

Search 542482 - there's an app for that over in the Mobile Apps & Games forum

Solution found!!!!
The issue was really troubling me and I finally found a solution. Install a small program called Incall lock which locks the call & end key. But that will totally disable u from accepting calls under WM6.1. So install s2u2 and enable screen response and voila!! U have. Both these are available elsewhere in this lovely forum.
Note:- The whole process during inplementation is quite messy as u will first have to install .net compact & samsung SDK software (both freely available).
4 software to do a simple thing which should have been taken care of by the OS. That's life under our billy, the goat.
Hope this help. I would be glad to give something back to this site, i have greatly benefited from.

TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).

ad720 said:
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
Click to expand...
Click to collapse
I tried tpro but it did not work for me. I am using wm6.1 under samsung touchwiz. Cud it b because of that ?

TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.

captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.

bimboybimboy said:
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
Click to expand...
Click to collapse
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps

captkkk said:
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
Click to expand...
Click to collapse
Well, as I said I hv 6.1 & 6.5 not yet available in my country. so...

Hi,
I installed Throttle Lock.. Nice lock... it has slide to answer..
secondly it does not interfere with the touch player, lyk s2u2 does..

Are you using Omnia II with WM6.1 ?
Because throttle lock is not saving the settings on my phone. And yes, I am clicking the "ok" button at the top right and getting a message "changes saved". And my slide to answer is ON but no slide is displayed. All I can see is the default lock screen which opens when I click on a button on screen but that certainly does not solve my problem. Using ver .07 (latest).
I have even registered myself. Hell, the config.xml file shows Calllock is on but its not even locking when the call comes. That should be the very basic default function. Sorry, back to s2u2.

I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..

Aafi-rocks said:
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Click to expand...
Click to collapse
Thanks. I unistalled S2u2 and installed again. Still no. Yet the program was working when I clicked on it. So, luckily having some working knowledge of windows, I found that the program is not putting a link in the start menu or start up folder. This I had to do manually. But thats unclean.
And what happens when a call comes is funny. There is a brief fight between the throttle default , the windows splash & the lock screen itself. Luckily, the lock screen is winning every time. But again unclean or is it the links I have placed.
Currenly, I have links to both thottlelock & throttlelockdemon in the startup & lockdemon in the start menu. How is it with u?
Also in the setting under samsung default setup, the options like lock mode & incoming are white on white. What are your current settings ?
Think this program was designed for HTC. But is definitly smaller and though not neat...working. Thanks

I have mapped it to a hardware key, so when I want to lock I press the hardware key..

Aafi-rocks said:
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Click to expand...
Click to collapse
Use incall lock for locking the keys when call comes. Works perfectly.
Tried the throttlelock for 2 days. Sometimes, the default wm screen was coming up and the look is messy. So more experiements......but till date s2u2+incall lock looks the cleanest. Will keep looking...

captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!

maardiweb said:
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
Click to expand...
Click to collapse
I hv omnia 2 with wm6.1. Tried touchlockpro and was absolutely useless. How is it possible ?

Can u plz put in the download link.. Iam sure its somewhere on XDA itself, but I am kinda lazy to search today.... I'll download it once I reach home..