Safest way to update radios and pri and all that stuff...... - EVO 4G General

I am PARANOID about updating my radio and pri, wimax etc because I CANNOT mess up my phone. However I don't want to be "left in the dust" especially considering that alot of roms advocate that all radios need to be updated.
How can I update in a way that wont mess anything up?
Is the safest way to update the radios by flashing the Sprint Lovers full package in the bootloader? If i do this will I be exempt from the side-affects that some people have had from updating (like 100% wake time, etc). Basically is flashing Sprint Lovers in the bootloader the safest and foolproof way ?
Thanks in advanced

Make a nand using one of the two latest recoveries.(clockworkmod or ra)
After that's done, flash calkulins combo.
Sent From My HTC Evo 4G On The Now Network From Sprint Using Tapatalk Pro!

Yes but alot of poeple bork up their evos by doing it that way.
My question is if I do it through the bootloader with SprintLovers am I pretty much guaranteed that nothing will go wrong?

hmsheen10 said:
Yes but alot of poeple bork up their evos by doing it that way.
My question is if I do it through the bootloader with SprintLovers am I pretty much guaranteed that nothing will go wrong?
Click to expand...
Click to collapse
I've used RA and flashed the combo. If someone screws up their EVO then they are not knowledgeable enough to do it. Find someone through the board and that lives near you and get their help. That's what I did and learn everything I needed to know in 5 minutes.

renildrah said:
I've used RA and flashed the combo. If someone screws up their EVO then they are not knowledgeable enough to do it. Find someone through the board and that lives near you and get their help. That's what I did and learn everything I needed to know in 5 minutes.
Click to expand...
Click to collapse
right. i recommend ra recovery. follow what i said in the post above and all will be fine. flashing the sprint lovers wont hurt though. just more time consuming.

Related

One click root - DOES work on myTouch 3G

There was a locked thread in development where someone asked if it would work. A lot of people replied (obviously without even knowing what they are talking about) that it wouldn't work.
it DOES work on the myTouch 3G's - I just did it on one.
It works on any android phone - but the current apk implementation flashes the 1.4 cyanogen recovery image so it only works on phones that image will boot (i.e. the HTC Dream, or the Sapphire... etc)
It's way easier to apply that than it is to apply the nbh downgrade... etc.
Cool
I posted the question in a wrong area im glad someone with a mytouch tried it i bricked my first mytouch
Worked
This worked for me also I am now on CyanogenMod v3.9.11.2 and it works very well.
TY Cyanogen!
ed
Works...but hesitant
This definitely works on the MT3G just tried it...whew glad it worked Still extremely hesitant on flashing new rom though. Dont know why even though I have a rooted G1. Perhaps I just love this phone too much to f*#$ it up
RyeBrye said:
There was a locked thread in development where someone asked if it would work. A lot of people replied (obviously without even knowing what they are talking about) that it wouldn't work.
it DOES work on the myTouch 3G's - I just did it on one.
It works on any android phone - but the current apk implementation flashes the 1.4 cyanogen recovery image so it only works on phones that image will boot (i.e. the HTC Dream, or the Sapphire... etc)
It's way easier to apply that than it is to apply the nbh downgrade... etc.
Click to expand...
Click to collapse
Now that I think about it...If you just use this to get the recov img the MT3G still has the "perfected" spl. So exactly will this allow you to flash any new ROMs? That is why the "goldcard" was used to trick it and flash to an earlier "non-perfected" spl which would then allow you to flash ROMs updated radio etc etc etc. Shed any light on this?
I know there can be risks when doing any kind of modding/hacking. What is the main risk with rooting the MT3G? Is it mainly an issue with the battery falling out or running out of juice? Or is the rooting process invasive enough (i know it is root = can touch everything) or unstable enough that there is a relatively high probability of an issue running the canned procedure?
I have my phone, love it, my wife would kill me if I wrecked it. I just want to know how likely I am to end up with a brick using this method.
Also a question to understand this procedure, if I run the apk and reboot normally then there is no lasting root, correct? I have to go into the recovery mode and flash over a new rooted rom for root to become permanent? Does this actually change the SPL on the MT3G, does it preserve the ability to flash other roms at any time in the future? I want to know if this is a one time open up your phone for rooting or if after I do this will I always have root.
Sorry for all the questions, but I have been lurking around and haven't found definitive answers to these questions. Thanks!
Dave
Dave, Ive used this method. However if you didnt notice in my previous post...the spl does NOT change. Which is why I questioned the ability to flash any ROMs. The more "complicated" method (http://forum.xda-developers.com/showthread.php?t=547133) requires a "goldcard" with an earlier version of the spl. Which I believe allows flashing to occur.
Yeah, I saw your post after I posted. I think this is great for a simple root I am thinking to have future rooting I will need the goldcard method anyway.
It would seem that this method should be able to modify the SPL since it is able to run as root, maybe not though...
I did mine last night and now doing my wifes MT3G and I was comparing cyanogen's vs stock and its night and day...no loading screen issues with cyan's build and keyboard response got better too...
LOL yeah Ii was thinking about the SPL if we can change it out? I kinda want to call my phone semi-rooted
so anyone flash a new spl/radio using this one click root? success? or no?
bobzoz said:
so anyone flash a new spl/radio using this one click root? success? or no?
Click to expand...
Click to collapse
Still waiting on this one also hehehe haven't seen anyone do it yet!
im debating on getting a mytouch if i can get full root in just a few clicks hmmmm definatley a positive haha. hows the mytouch work in recovery terminal? since theres no hardware keyboard?
bobzoz said:
im debating on getting a mytouch if i can get full root in just a few clicks hmmmm definatley a positive haha. hows the mytouch work in recovery terminal? since theres no hardware keyboard?
Click to expand...
Click to collapse
just use the trackball to select what you want...cant use console though (ALT-X)
Works
bobzoz said:
so anyone flash a new spl/radio using this one click root? success? or no?
Click to expand...
Click to collapse
Just did it...1.33.2005/ also S-off. this is definitely legit and makes things a hell of a lot more easier than all those damn adb commands. Dont get me wrong at all I do appreciate all the work that was done by Haykuro and the other boys because without them Im sure this wouldnt be possible. Anywho...it works.
Okay. As newb as one can get with phone mods, etc. But it actually works. I dont know what the exact benefits of it are but I am running... Mod version CyanogenMod-3.9.11.2 per about phone. All my downloads are gone but it worked. I dont know what the difference/any limitations is for down the road, in comparison to the gold card method (I hope none), with this type of root but hey it actually worked and I would have kick my own a$$ if I bricked my phone. Thanks to folks who found this way and are their any "rooted" differences now that I am on cfw using this method for say updating to cyanogens 4.0 eventual release?
Alright, I took the plunge and it worked flawlessly!
I use the 1 click install via the market app called Recovery Flasher. I installed CyanogenMod 4.0.1 Stable. Zoom zoom zoom...
I thought I may have had an issue when I rebooted after flashing since it sat at the MyTouch 3G splash for a ton longer than normal. I had read it was normal for the first boot to take longer so I didn't freak out and pull the battery. I just let it come up and now I couldn't be happier.
If I remember reading correctly CyanogenMod has the fix for the root vulnerability used in this hack to root plugged. So, now that I have a rooted ROM and recovery 1.4 will I ever need to worry about having the dreaded "Perfect SPL?"
so easy a caveman could do it! a thousand times, thank you.
so its confirmed you can FLASH a different SPL with no problem ? cuz if so im gettin a mytouch ! lol
go for it
bobzoz said:
so its confirmed you can FLASH a different SPL with no problem ? cuz if so im gettin a mytouch ! lol
Click to expand...
Click to collapse
go to town boss...now i need to get out of the stupid hero boot loop.
Thanks. I also took a chance since I got my Touch for free by Timo mistake. Couldn't resist. Aside a few apk not able to install everything works fine. Noob question, can I now format sd card?
Oh, thanks for Quick Office.

All Current Radios

here i have all current known radios for the Eris. these radios can be flashed via Amon_RA recovery. ive put them in update.zip format. so all u need to do is place them on the root of ur sdcard and flash like any other update.zip from recovery.
FLASH THESE AT UR OWN RISK. LIKE ANYTHING ELSE U DO TO UR PHONE. IM NOT RESPONSIBLE
INSTRUCTIONS
step one: download and put the desired radio update.zip on to the root of ur sdcard.
step two: flash the update.zip via Amon_RA recovery. by selecting update.zip from sdcard and choosing the radio zip u want.
step three once it flashes it will ask u to press a something to continue. do it and itll reboot and take a few seconds on a bootloader screen. once that finishes, it will reboot back into recovery. from there just choose reboot, to boot into android
step four go into settings>about phone>software information. under baseband is ur radio version. enyoy
now as for the question of which radio is better...
there is no good answer to this question. some enjoy results from different radios. an up graded radio will always do good. as it will most likely give better battery life and signal then the stock radio. all of these radios will work with any rom (1.5 - 2.1) and unless a dev has inclued a radio in their rom. the radio will always remain the same unless u flash it with another.
now for the question about why some radios say heroc instead of eris...
the heroc radio are just that... heroc radios from sprint. its a cdma radio so it works the same as verizon radio. dont believe me?! do a strings | grep on all the radios and u will see they are all using both sprint and verizon logins and such. also as right now im running the latest radio which is the heroc one. everything works fine and its the one ive had best results with on both my Sprint Hero and my wifes Verizon Eris. although others may find better results with other versions.
please feel free to post ur radio results here on this thread.
md5sum
2.42.00.03.10-heroc.zip md5sum (1eedacfbbe62349783f1137966b65e15) *WARNING: reported BT issues*
2.41.04.02.03-heroc.zip md5sum (c966d6e0ca67f598669e7da6bf1b13f2)
2.41.04.02.02-eris.zip md5sum (3e4d7868c291bae0c44f1bef80376c47)
2.40.00.01.22-eris.zip md5sum (9bb6914b264e9d6d1632e8876b709229)
1.04.01.09.21-heroc-shipped.zip md5sum (cd05836cf21c1958138bb8e752657b68)
again have fun
reserved for future use
great work! have you noticed an increase in reception? or just better better life?
Will dialing *228 anytime after the patch mess it up?
gohamstergo said:
Will dialing *228 anytime after the patch mess it up?
Click to expand...
Click to collapse
Nope, everything should work fine, i use to use sprint radio's all the time on my winmo devices, i allways thought they worked better
its only been 10 minutes or so since i flashed the latest radio, but my 'Time without a signal %' is at zero without the Airplane Mode trick will keep checking, but this seems to be good news! Not that I have ANY idea if that bug could even be related to this haha, but whatever, as long as it works..
edit: well over an hour now..still 0%
edit2: started doing it again after the next reboot, airplane trick still needed
Thanks for the tutorial, and for those that browse and don't want to register an account (don't be lazy) I have the files hosted over at photex-media dot net
Photex said:
Thanks for the tutorial, and for those that browse and don't want to register an account (don't be lazy) I have the files hosted over at photex-media dot net
Click to expand...
Click to collapse
just dont forget to give credit. i didnt get these radios in update.zip form. so i did all that work myself. also took the time to flash each of them before posting to make sure all was good and they all worked
Please be careful guys, I would not flash your radio without a reason to.
However thanks for the tutorial, I have another eris radio version, but I don't think it would be wise to flash it. Do you want it?
improved sig
have had the newest eris radio for a couple hours now and can say that the signal strength has signifigantly improved and can't confirm battery drainage at this point but the signal strength is there for sure...jcase why would it not be advisable to flash a radio update?
jcase said:
Please be careful guys, I would not flash your radio without a reason to.
However thanks for the tutorial, I have another eris radio version, but I don't think it would be wise to flash it. Do you want it?
Click to expand...
Click to collapse
pm me and give me the info on it. please
also there is no reason to try and scare people about these radios ive posted. they all work and it will do no harm to flash them. ive noticed better reception and battery life since flashing the latest sprint radio on both my heroc and eris. if anyone flashed the root leak they got a radio that ive posted here. its actually an older radio at that.
but yeah if u are sure u have an eris or sprint radio. then please give me the info and ill test it.
sunder74 said:
have had the newest eris radio for a couple hours now and can say that the signal strength has signifigantly improved and can't confirm battery drainage at this point but the signal strength is there for sure...jcase why would it not be advisable to flash a radio update?
Click to expand...
Click to collapse
flashing anything can be risky. but i wouldnt have posted this or anything else that i have not tested myself. i wouldnt ever post something that would put anyones device at risk. ive flashed many radios and know what im doing. i wouldnt advise anyoone to go out and find mystery radios to flash as that is a sure fire way to brick ur device.
again all of my radios were tested by me before i posted and they all work well
toastcfh said:
flashing anything can be risky. but i wouldnt have posted this or anything else that i have not tested myself. i wouldnt ever post something that would put anyones device at risk. ive flashed many radios and know what im doing. i wouldnt advise anyoone to go out and find mystery radios to flash as that is a sure fire way to brick ur device.
again all of my radios were tested by me before i posted and they all work well
Click to expand...
Click to collapse
excellent, thanks for sharing and taking the time and the risk to test and post these as i stated previously signal is much improved with the newest eris version...living close to an airport seems to reek havoc on my coverage idk why, again thanks.
I know this sounds bad but how the heck do you see what radio you current have I know its in settings but I am having a brain fart or am just to blind to see it in about phone.
afoulke said:
I know this sounds bad but how the heck do you see what radio you current have I know its in settings but I am having a brain fart or am just to blind to see it in about phone.
Click to expand...
Click to collapse
read my first post and it tells u where to look
toastcfh of course you get credit, i'm just trying to have a nice organized site with tutorials and files locally hosted as an alternative. XDA becomes pretty cluttered at times. I hope you don't mind I did some spelling corrections
And for a quick review before flashing the heroc rom I had maybe 0-1 bars in my apartment, now I have 2-3 and calls connect EXTREMELY quick in comparison.
toastcfh said:
read my first post and it tells u where to look
Click to expand...
Click to collapse
Doh.... I totally skipped that thinking well I need to find my version before I install.. Thx!
Can you downgrade radios unlike Roms?
toastcfh said:
pm me and give me the info on it. please
also there is no reason to try and scare people about these radios ive posted. they all work and it will do no harm to flash them. ive noticed better reception and battery life since flashing the latest sprint radio on both my heroc and eris. if anyone flashed the root leak they got a radio that ive posted here. its actually an older radio at that.
but yeah if u are sure u have an eris or sprint radio. then please give me the info and ill test it.
Click to expand...
Click to collapse
I have a reason to inform them they are running a risk. A lot of people out there have no clue what they are doing nor risks involved. If something happens, say some idiot pulled the battery, or flashed on a low battery, bad things could happen. or if a file happens to be corrupted.
I have the radios from stock 1.5, root 2.1 and leak 2.1, which do you not have.
jcase said:
I have a reason to inform them they are running a risk. A lot of people out there have no clue what they are doing nor risks involved. If something happens, say some idiot pulled the battery, or flashed on a low battery, bad things could happen. or if a file happens to be corrupted.
I have the radios from stock 1.5, root 2.1 and leak 2.1, which do you not have.
Click to expand...
Click to collapse
i have them all. the stock eris radio im pulling from the ruu now and will add later when i get a chance.

flash back to old radio?

Before you start flaming me, please understand I did a thurough search of the forum and found nothing conclusive. What with bricks and RUU semi solutions, its kinda scary.
Im running flipz radio, and would like to flash back to the old one in preperation for the 2.1 update. Has anyone sucesfully flashed back, and if so, how?
I do not have a nandroid containing the old radio (but from what i gather, nandroiddoesnt effect the radio?) due to an accidental sd format (dont ask)
I do have the backup recovery img from my initial root; will this help?
Thanks in advance!
mountaindont said:
Before you start flaming me, please understand I did a thurough search of the forum and found nothing conclusive. What with bricks and RUU semi solutions, its kinda scary.
Im running flipz radio, and would like to flash back to the old one in preperation for the 2.1 update. Has anyone sucesfully flashed back, and if so, how?
I do not have a nandroid containing the old radio (but from what i gather, nandroiddoesnt effect the radio?) due to an accidental sd format (dont ask)
I do have the backup recovery img from my initial root; will this help?
Thanks in advance!
Click to expand...
Click to collapse
wow i used search for radio and found this on page 2 http://forum.xda-developers.com/showthread.php?t=644004&highlight=radio
im jus kidding but anyways yes the stock update signed works correctly no bricks. just follw my instructions and hopefully get you on track for the non existent 2.1 we get today!
goodluck
Avalaunchmods said:
wow i used search for radio and found this on page 2 http://forum.xda-developers.com/showthread.php?t=644004&highlight=radio
im jus kidding but anyways yes the stock update signed works correctly no bricks. just follw my instructions and hopefully get you on track for the non existent 2.1 we get today!
goodluck
Click to expand...
Click to collapse
I thank you most kindly for your speedy response. The threads Ive read have all been inconclusive; ill review your link and report back.
Flash went perfect.
Just wanted to thankyou, and apologize for not searching as well as I should have. I guess I was a little scared and just wanted some attention? Lol jk. Mods feel free to delete, or not, as I promised a report.
Ive stuck with the new radio since its come out, and have in no way noticed better battery life or signal; if anything-worse! -89 to -95 on new radio, -75 to 85 stock. Maybe its cause Im in detroit, maybe my phone just doesnt agree with the new radio (we all know how tempermental the Hero is)
Just my personal experience. I apologize for the clutter.
And yes, lets keep our fingers crossed for 2.1..
mountaindont said:
Flash went perfect.
Just wanted to thankyou, and apologize for not searching as well as I should have. I guess I was a little scared and just wanted some attention? Lol jk. Mods feel free to delete, or not, as I promised a report.
Ive stuck with the new radio since its come out, and have in no way noticed better battery life or signal; if anything-worse! -89 to -95 on new radio, -75 to 85 stock. Maybe its cause Im in detroit, maybe my phone just doesnt agree with the new radio (we all know how tempermental the Hero is)
Just my personal experience. I apologize for the clutter.
And yes, lets keep our fingers crossed for 2.1..
Click to expand...
Click to collapse
where you running in CDMA auto PRL?
Chad
nimitz87 said:
where you running in CDMA auto PRL?
Chad
Click to expand...
Click to collapse
Lol I did all the fixes.
Even now, responding to your post voa handset, I can tell its faster. And after flashing the radio at 30%battery, and charging since my last post, ive gone up almost double.
So question is...again inconclusive threads.
Can you flash back the old radio then RUU with out issues? Given there is always a chance for a brick but to avoid issues would it be smart to flash the stock radio before running RUU??? Or is the damage already done?
Kcarpenter said:
So question is...again inconclusive threads.
Can you flash back the old radio then RUU with out issues? Given there is always a chance for a brick but to avoid issues would it be smart to flash the stock radio before running RUU??? Or is the damage already done?
Click to expand...
Click to collapse
did you not even read the god damn thread? post #4 in particular.
holy **** man people need to learn how to READ I'm on a ton of forums and reposts happen and questions asked more than once but NONE worse than this forum.
/rant.
Chad
nimitz87 said:
did you not even read the god damn thread? post #4 in particular.
holy **** man people need to learn how to READ I'm on a ton of forums and reposts happen and questions asked more than once but NONE worse than this forum.
/rant.
Chad
Click to expand...
Click to collapse
OK ass, I understand you can flash the radio back, but my question is about running RUU afterwards **** head.
Post #4 Says nothing about running the RUU just that he could flash the radio back which we know is possible with other threads out there.
Quit being so damn arrogant and try to answer the question that was asked.
/rant moron.
Someone pass me the popcorn...
Lets not get upset people.
@K; in my not so professional opinion, the RUU issues are when U'ing between a 2.1 based rom and the RUU, a 1.5 rom. If you have the stock radio and any 1.5 rom, theres simply no reason the ruu wont work
Avs radio flash worked for me,.i havent ruu'd yet but i will report back later this week a conclusive thread.
Can you flash back the old radio, RUU, and TRUELY unroot?
Tune in next time...
@the rest
Hi!
mountaindont said:
Lets not get upset people.
@K; in my not so professional opinion, the RUU issues are when U'ing between a 2.1 based rom and the RUU, a 1.5 rom. If you have the stock radio and any 1.5 rom, theres simply no reason the ruu wont work
Avs radio flash worked for me,.i havent ruu'd yet but i will report back later this week a conclusive thread.
Can you flash back the old radio, RUU, and TRUELY unroot?
Tune in next time...
@the rest
Hi!
Click to expand...
Click to collapse
Thank you.
I'm in Michigan also and definitely experience a worse signal strength.
Why would I have to flash back to. the old radio for the 2.1 (when it finally does come out )
RPerry435 said:
I'm in Michigan also and definitely experience a worse signal strength.
Why would I have to flash back to. the old radio for the 2.1 (when it finally does come out )
Click to expand...
Click to collapse
If you want the oficial update, youllhave to unroot.

Hosed Unrevoked thread

Figured I'd start a thread for all of us suckers that went with Unrevoked and want to back down or switch methods.
Has anyone that did the Unrevoked 2 / ClockWorkMod method of root successfully backed down to stock and / or converted to Toast?
What method did you use.
Thanks
Smac61 said:
Figured I'd start a thread for all of us suckers that went with Unrevoked and want to back down or switch methods.
Has anyone that did the Unrevoked 2 / ClockWorkMod method of root successfully backed down to stock and / or converted to Toast?
What method did you use.
Thanks
Click to expand...
Click to collapse
*raises hand*
4G still hosed. I was on Unrevoked v1 which hosed my 4G.
Did the dummy's guide to rooting found on this forum.
Still no 4G, but my MAC is now correct.
If you still have partial root try this
http://forum.xda-developers.com/showthread.php?t=715915
Might not fit your situation but might help somebody out
just use Toasts ruu to get back to stock then reroot using his guide.
p.s. whats wrong with unrevoked2, does 4g not work with it or something?
Im in a no 4g zone so.................
ifly4vamerica said:
If you still have partial root try this
http://forum.xda-developers.com/showthread.php?t=715915
Might not fit your situation but might help somebody out
Click to expand...
Click to collapse
Just did that. No go.
I have tried a lot of things to restore my 4g. I reset my MAC to original using:
http://forum.xda-developers.com/showthread.php?t=715525
I have converted to Damage Control: Still no working 4g.
I have tried basically everything I can think of including going back to stock.
At this point I think I am going to flash the original hardware and do the OTA update....then take it in and show that my 4g isn't working.
This has been bugging me for a while, and this seems like the right thread to ask this question in. If a lot of roms require Toast's root method, and Unrevoked has given issues, is there a reason that people are still using Unrevoked's root method over Toast's? Not to hate on the Unrevoked guys, but this has been bugging me.
i have tried everything, i dont know what to do!!
jonathaflores said:
i have tried everything, i dont know what to do!!
Click to expand...
Click to collapse
What EXACTLY are you trying to do?
restore 4G after using the Unrevoked 1 to update to the new firmware, but it just busted my 4g i have gonne back to stock, i am bout to take it to sprint and act dumb!!
jonathaflores said:
restore 4G after using the Unrevoked 1 to update to the new firmware, but it just busted my 4g i have gonne back to stock, i am bout to take it to sprint and act dumb!!
Click to expand...
Click to collapse
This may be the only option. I have the same issue.
As far as using unrevoked over toast, it was just the first one I used to get root when I got the phone. I went with it because it was easy. I have since used toast to install other items in an attempt to restore 4g. I will use toast in the future now that I am familiar with it.
okay, so i used unrevoked.apk to root then used unrevoked2 to flash recovery. are you saying that 4g is now completely gone from my phone?
yep sir, Unrevoked its busting 4g!!
I was using unrevoked.apk at first, as I didn't want to wipe my EVO. I had to wipe it anyway to move from the I/O account to my personal one, so I though "might as well root now." I like having ENG SPLs, and unrevoked2 wasn't out yet, so it wasn't a difficult decision.
I was terribly disappointed in every custom ROM I tried. They would run hot, the battery sucked, and they'd randomly reboot when I wasn't even touching them. I finally had enough and went back to a stock system.img with unrevoked.apk installed, and everything worked fine. I only use root to have full access in adb anyway - I don't really mess with task killers or the like. I'm not interested in a custom ROM until FroYo AOSP.
I applied the unrevoked version of the latest OTA patch last night. Let's see how that goes…
im confused. why is this just now being brought up. unrevoked has been around for awhile. I haven't heard anyone complain until now. Is it something Unrevoked has done recently, or are we just now realizing the issue?
It is a known issue. Unrevoked released a response to the OTA for users to update without breaking root. The initial release broke 4g for almost everyone who applied it (maybe everyone). They pulled the release and a day later put up a new one that works (as far as i know). Those who used the first release still have no 4g. To the best of my knowledge, no one has been able to fix the 4g issues caused by the initial unrevoked2
Edit:
Read the second bullet under FAQs: http://unrevoked.com/rootwiki/doku.php/public/evo_ota_2_patch
Why the f*** is there ANOTHER thread on this...
There's already 3 threads relating to this, one of which I made that goes into detail and another which talks about changing MAC and it still doesn't work.
There is no solution, stop making new threads hoping to find one.
If you want a solution, wait for unrevoked to announce one.
bandagraph said:
It is a known issue. Unrevoked released a response to the OTA for users to update without breaking root. The initial release broke 4g for almost everyone who applied it (maybe everyone). They pulled the release and a day later put up a new one that works (as far as i know). Those who used the first release still have no 4g. To the best of my knowledge, no one has been able to fix the 4g issues caused by the initial unrevoked2
Edit:
Read the second bullet under FAQs: http://unrevoked.com/rootwiki/doku.php/public/evo_ota_2_patch
Click to expand...
Click to collapse
ok, so this just pertains to the OTA?
cause I haven't dont the OTA.
it doesnt matter, we jut got screw, taking my phone to sprint on monday, two days to find a solution, or i am taking my phone back to sprint!!
jonathaflores said:
it doesnt matter, we jut got screw, taking my phone to sprint on monday, two days to find a solution, or i am taking my phone back to sprint!!
Click to expand...
Click to collapse
LMAO - you really think the people at your "local sprint" store are smarter than these guys at XDA?
-= User Error =-

[Q] Which EVO Rom to go with?

Ok so I am getting 2 HTC EVO's from a buddy of mine, Im going to be putting them on metropcs for my girlfirend and myself. Im going to do the flash by following the guides I found below;
1. Go to metro store and have them do a port for $30 (unless somone know a cheaper way to get my ESN added to metro's database)
1.5 Update Phone to 2.2 Froyo (if its not already, im not sure what android version is on these yet)
2. Root Phone and Unlock nand by using the method in this video
http://www.youtube.com/watch?v=GsoVzMadiQE
3. Get all the goodies working, by following this page.
http://forum.xda-developers.com/showthread.php?t=796257
Now this is where my questions comes in. First, Does anyone see a problem with my choice of guides? If followed properly should everything above work just fine? Second, I want to flash the custom rom
http://forum.xda-developers.com/showthread.php?t=795182
What are all the different downloads for? Are they differet builds or are they things that need to be installed on the phone after the flash? is there maybe a link to a guide on the rom itself?
And if I do flash a different rom, will all of the above settings still stick? SO is it literally 1. Install rom from SD 2. Boot rom and wait 3. Have fun? I wont need to "redo" anything after flashing?
Hope someone will lend me a hand here. Im not new to flashing phones, but I am new to flashing smart phones, For the most part the seems pretty straight forward.
Also I have the $40 MetroPCS Talk,Text,Web Plan, I do not live in a evdo market so I do not have 3G access, I will be using 1x and thats fine with me. However, do I need to upgrade my plan to beable to make this work? If yes then which plan would work best? if I dont "need" to upgrade, would there be any benifeit in doing so?
Ok I think thats it for my questions...Now I just cant wait to get the phones, he'll hopefully ship them on saturday.
try many roms and see what works best
CheesyNutz said:
try many roms and see what works best
Click to expand...
Click to collapse
I found a List of different roms, but do I need to use roms specific for MetroPCS or can I safely use any rom and everything should work?
Also is it safe to flash multiple roms? is it fixable if you get a bad flash?
relik1989 said:
I found a List of different roms, but do I need to use roms specific for MetroPCS or can I safely use any rom and everything should work?
Also is it safe to flash multiple roms? is it fixable if you get a bad flash?
Click to expand...
Click to collapse
That's an interesting question. I'm pretty new to flashing myself, but have been doing a lot of reading here and now have flashed 3 different ROMs. As far as the MetroPCS thing, someone else will have to answer that one. I only think of the EVO on Sprint. Can't think of a reason why any of the ROMs wouldn't work, other than Sprint specific apps, but don't know for sure.
As far as flashing multiple ROMs, from what I gather you can flash as many as you want. Of course you can only have one running at a time, but as long as you do your wipes between flashes, you should be good to go. If I'm wrong about this, somebody please let me know.
Thattallbastard said:
That's an interesting question. I'm pretty new to flashing myself, but have been doing a lot of reading here and now have flashed 3 different ROMs. As far as the MetroPCS thing, someone else will have to answer that one. I only think of the EVO on Sprint. Can't think of a reason why any of the ROMs wouldn't work, other than Sprint specific apps, but don't know for sure.
As far as flashing multiple ROMs, from what I gather you can flash as many as you want. Of course you can only have one running at a time, but as long as you do your wipes between flashes, you should be good to go. If I'm wrong about this, somebody please let me know.
Click to expand...
Click to collapse
Your correct, but I thought the roms are specific to the carrier, look at the evo rom for cricket.
Sent from my PC36100 using Tapatalk
Ok so ill start looking around for MetroPCS specific roms. Does anyone know a good place to start looking?
as far as using sprint, I though about it, I also thought about porting to boost because with boost i could still get 3g, where with metro ill only get 1x. However Neither Sprint nor Boost have service within about 5mi of my apartment. Not only that but MetroPCS has actually been good to me for the past 2years.
Ok I found the Rom im looking for, but maybe im just slow, but IDK how to install it...
http://forum.xda-developers.com/showthread.php?t=795182
I want it with CM7, how do I accomplish this?
I recommend ACS or any EvoKings roms. Sick as hell and functional
Sent from my PC36100 using XDA Premium App
latingonzo86 said:
I recommend ACS or any EvoKings roms. Sick as hell and functional
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
+1 I've flashed a lot of roms and EvoKings in awsome.

Categories

Resources