Is there any way to install it without activesync? or is the a version I can install onto an Android? Or better yet, Is there an Android version?
Sorry, but this forum seems to have the most details. I plan on running w p 7 if I can get it installed.
Thanks
You need activesync so i can establish a connection, i think.
Related
I just tried WM2003 and came back to SER 1.2 without problems - I was told it's not possible without SD card. Am I so lucky?
Funny, I did the very same thing before reading it couldn't / shouldn't be done, makes me think though, what if it had all gone wrong!!!!!!
For those who have tried the WM2003, please advise me whether it's worth my risk (I'm still indecisive) :?
Just tried to upgrade from 1st version of WME2003 to the latest using the upgrade utility, no go. Goes into upgrade mode on PC & PPC, then progress bar screen on PPC goes to white, a few minutes later a error pop-up on PC telling me to reset & run utility again. When I do so same problem. I'm just curious what version on Activesync are you running & on OS on the Desktop
Thanks
erickbryce said:
Just tried to upgrade from 1st version of WME2003 to the latest using the upgrade utility, no go. Goes into upgrade mode on PC & PPC, then progress bar screen on PPC goes to white, a few minutes later a error pop-up on PC telling me to reset & run utility again. When I do so same problem. I'm just curious what version on Activesync are you running & on OS on the Desktop
Thanks
Click to expand...
Click to collapse
Hey Erick,
I had the same problem with the 1st version of WM2003. I was unable to do the upgrade with the utility. It would seem like the version 4.00.01 of WM2003 is far more mature in terms of this sort of functionality. For example, ActiveSync would not connect with the device in standby. This is not the case in the new version of 2003 which goes to show that maybe some processes were not running.
Going by what I experienced with the older WM2003, I did not try an RUU flash to test if the newer version worked, but I won't be surprised if it does. I was running ActiveSync 3.7 with WinXP Pro.
Thanks Sheran. So I guess it's SD card time This is an ActiveSync problem not an OS problem? What do you think? SD card should work right?
The reason I'm suggesting ActiveSync is I am unable to use any ROM utility to flash any ROM version now, which I was able to do before i.e. SERv1.1.
I believe I had the previous version of ActiveSync back then & now ActiveSync freaks-out when I try to use the upgrade utility for any ROM.
erickbryce said:
Thanks Sheran. So I guess it's SD card time This is an ActiveSync problem not an OS problem? What do you think? SD card should work right?
The reason I'm suggesting ActiveSync is I am unable to use any ROM utility to flash any ROM version now, which I was able to do before i.e. SERv1.1.
I believe I had the previous version of ActiveSync back then & now ActiveSync freaks-out when I try to use the upgrade utility for any ROM.
Click to expand...
Click to collapse
I'm thinking this has more to do with the WM2003 1st version (3.04 build 13083) OS rather than your PC OS or even your ActiveSync. I think the reason some people can use the ROM Upgrade Utility is because they are running the newer version of WM2003 (Ver 4.00.01 build 13100) which seems to work well with ActiveSync.
Unfortunately if you install the older version, until I'm told otherwise, the only way to get out of it is to do an SD Card flash.
Thanks again Sheran I tend to use the SD method, wanted to not have to wait for two write processes. Oh well back to the tried and true method, for now 8)
I was running the newer version (build 13100)
Activesync 3.7, Windows XP Proffesional
After intensive reading of this site (compliments!!!), I decided to take the risk and replace the old PPC 2002 ROM version (3.12.07 ENG) to ROMkitchens' WM 2003 SE (3.04.00 ENG) on my XDA1. The upgrading process was without complications and after a full reset (Wallaby bootloader V.5.15 was shown) I happily started with the standard installation procedure.
Unfortunately, replacing the XDA in the cradle didn't realise a connection between the XDA and the PC. ActiveSync version is 4.2, USB as connection is enabled. So, e.g. a synchronisation with Office is not established, nor is it possible to install other programs like TomTom.
Is it possible that there are compatibility issues or just wrong settings????
Any help is greatly appreciated (also via PM). I'am looking forward to be able to use my device again!
Bergerm said:
After intensive reading of this site (compliments!!!), I decided to take the risk and replace the old PPC 2002 ROM version (3.12.07 ENG) to ROMkitchens' WM 2003 SE (3.04.00 ENG) on my XDA1. The upgrading process was without complications and after a full reset (Wallaby bootloader V.5.15 was shown) I happily started with the standard installation procedure.
Unfortunately, replacing the XDA in the cradle didn't realise a connection between the XDA and the PC. ActiveSync version is 4.2, USB as connection is enabled. So, e.g. a synchronisation with Office is not established, nor is it possible to install other programs like TomTom.
Is it possible that there are compatibility issues or just wrong settings????
Any help is greatly appreciated (also via PM). I'am looking forward to be able to use my device again!
Click to expand...
Click to collapse
~
Problem solved! Did cost some time but after input from other Forum I finally reinstalled ActiveSync and that was the solution.
hi i hava th same problem! what can i do? thanks
Bergerm said:
~
Problem solved! Did cost some time but after input from other Forum I finally reinstalled ActiveSync and that was the solution.
Click to expand...
Click to collapse
There have already been the hint....
Stefan
I am a newcomer about PDA devices. I have a Qtek S200 (Prophet) device and i have some problems with it. It has Windows Mobile 5. I did not upgrade it with a new rom. So here are my questions and problems about this device. Please respond me.
1- Wifi Problem = I have an access point at home (US Robotics 5451) and i am using it with WPA2 security. So when i try to connect with my PDA it connects but a few seconds later connection losts. But when i do not use WPA2 or another encryption system i can connect with my PDA easily. What can i do to solve this problem?
2- .NET Framework Upgrade = I have tried to install Microsoft .net framework 2.0 to my devices storage card but when i do that my device gives an error message. It says " Main memory of device is low please free some" so i could not install it perfectly and when i try to install stg. that needs .net framework 2 or higher problems arise about installation. What can i do?
3- ROM Upgrade = I really would like to upgrade my prophet device. I want a rom with TouchFLO application so anybody can help me about it? What rom should i install?
I think a WM6 (not 6.1) ROM would be best they have .NET CF 2.0 built in, and have been around long enough for the problems with WiFi to be removed. I personally would recommend one of Gullums "Prophet Touch" series as they are stable and have the cube built in, or something like PDAViet 4 (http://forum.xda-developers.com/showthread.php?t=319206&highlight=Prophet+Touch) I think they use the "old" method of upgrading, so look at that rather than the "new" method.
EDIT: for a simpler upgrade, I would use one of gullums Coffie ROMs (http://forum.xda-developers.com/showthread.php?t=355915&highlight=Prophet+Touch) they use the "new" method for upgrading. Info on that can be found here: http://forum.xda-developers.com/showthread.php?t=350033
I installed the magldr 1.12 and installed the WP7 successfuly. but when i try to flash a nand build android rom i get this error:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I am using windows xp.
I have an tmous hd2
magldr works like a charm for the wp7 flash.
I did search and tried all the suggestions i could find.
reformated my sd card with sdformat 3.0
i tried a couple diff. roms even the dft one. and cmylxgo
i went back to stock wm6.5.
task 29
installed magldr 1.11
installed diff. radios
removed my sdcard
i probably tried more but i can remember, ive been messing around with it for a while now.
Im going to go back to wp7 for now untill i find a wm6.5 rom i like.
Anybody have any more suggestions? would be much aperciatated. thanks in advance.
http://forum.xda-developers.com/showthread.php?t=926895
Same problem, but I've give him some advice. It worked for me, but not him. It's worth a try though.
Ok, thanks! that solved it.
I had that thread open in a new tab. i posted my thread at the same time you posted to disable it in active sync not task manager. sorry about the extra thread.
But i did try to disable active sync in the task manager.
-----------------------------------------------------------------------------
Just had to disable usb connections in active sync.
open up active sync,
click on file,
connections,
uncheck the box that says allow usb connections. no WM needed. at least not for me.
----------------------------------------------------------------------
That should realy be in the MAGLDR thread. for us xp users.
Also, the program for cracking the windows live requires Vista or W7.
And to install zune you need at least sp3 on xp. i guess im a little out of date.
Thanks again.
Windows 7 usb not recognised
I am having the same problem in windows 7,wondering if ive bricked the phone.I unchecked active sync in wm but still the pc does not recognise the phone.Is there any way out of this.I am just getting wait USB...USB so I must be doing something right any help much appreciated.Is there any way of recovering to Windows mobile from flasher mode.
I have Eu HD2 which has the Stock Desire Rom installed and all is working fine but I would like to install a new ROM like one of the many that use Sense 3.0 or android 2.3.5. I would also like to have my SD card partitioned so I actually have space to install apps on my phone
How do I go about doing this?
PS- Sorry for the super Noob question :-/
PPS - the ROM I had in mind was
http://forum.xda-developers.com/showthread.php?t=1272440
please
read the stickies about CWM in the dev section
erm, any chance of a friendly link to get me started
vrchris said:
erm, any chance of a friendly link to get me started
Click to expand...
Click to collapse
Here.
Thats great cheers! One small problem at the moment is I can't get my phone to sync with my PC now. I can get it to connect and I can view the files on it in Explorer but it won't "sync" - any ideas?
I have Windows 7 64bit
reinstall the drivers for activesync
That instruction about syncing / getting an active sync connection doesn't mean what it appears to mean. It simply means get a USB connection.
Put phone in bootloader, connect to USB, when word. "Serial" becomes "USB", that's an activesync connection and you can flash.
Try this one:
http://forum.xda-developers.com/showthread.php?t=1185087