my computer will not recognize my magldr and whetrying to flash a rom says readme.txt not available for rom what does this mean?
Related
So i installed HSLP and radio on my HD2 and MAGLDR 1.13.
So i downloaded stock gingerbread 2.3 and when i go to USB flasher and run ''RUN.EXE'' ,
it gave me this error in DFT ANDROID FLASHER
Happen error
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)
I also tried doing this with the sd card out of my phone.
I also tried flashing to my stock rom and when HTC LOGO comes up with the white backround,it auto reboots.
I also tried task 29.
Any suggestions?
dazkyl said:
So i installed HSLP and radio on my HD2 and MAGLDR 1.13.
So i downloaded stock gingerbread 2.3 and when i go to USB flasher and run ''RUN.EXE'' ,
it gave me this error in DFT ANDROID FLASHER
Happen error
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)
I also tried doing this with the sd card out of my phone.
I also tried flashing to my stock rom and when HTC LOGO comes up with the white backround,it auto reboots.
I also tried task 29.
Any suggestions?
Click to expand...
Click to collapse
Well i had the same problem las night. The solution that worked for me was very simple.
I flashed an WM6.5 ROM and after that i`ve installed again MAGLDR 1.13 and i flashed my HTC HD2 with an android rom.
Please reply if worked for you too. Thnx
Hi I tried to update the rom and now i'm unable to do anything
i can get it onto the tri colour screen with the following info
PB81100 HX-BC SPL-2.08.HSPL 8G XE CotullaHSPL 0x30
once i try to load anything else it get stuck in a new screen with this
LEOPB81100 HX-DC
cLK-1.6.5.0
HSPL 8G XX
Radio -unknown
boot recovery
boot sboot
continue normal boot
boot fail ! check boot/recovery partition try again!
tried to do all of these just returns me back here
i have printed a partition table and the largest size is
user data blocks 1960 size 245 mb
is my beloved leo destine for the bin??
help please
i don't think you bricked...just something got wrong with cLK. Try again every steps from task29
hi i tried task 29 but it just sits for ages and then comes up with an error message!
hi just tried it again, this time it loaded, but it now just shows the front HTC screen, whilst turning it on held the on key to try and get into cLK but nothing
of course, because task29 cleared cLK from nand...just flash cLK or magldr as usual, and then flash the recovery, and then install a rom from zip
sorry, just flash maglar v1.13, when it booted up it said kernel was missing??
trash2 said:
sorry, just flash maglar v1.13, when it booted up it said kernel was missing??
Click to expand...
Click to collapse
its normal after flashing mgldr. now you must find a rom. then make a cwm partition according to the needs of rom. then flash the rom from sd.
sorry to be a pain.
i wanted to put clk on but every time i go into usb flasher and try i get
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
i'm running window 7 does that make a difference
Flash clk from bootloader not magldr (but of course you knew this didnt you? having thoroughly read and understood the clk thread post 1, right?)
Everything works fine but I cannot access AD Recovery from MAGLDR after I flashed clockwork recovery to 3.1.0.0 from Rom Manager, I found out that messes up the clockwork recovery from MAGLDR, how can I undo this?
Did u tried to reflash recovery ?
Ultimately you can task 29 the phone right ?
Same Problem
I Have been having the same issue, any solutions?
I don't think MAGLDR can used to flash recoveries using Rom manger. I think only cLK can do that.
Please correct me if I'm wrong.
Same problem here! i tried 3 things:
1. removing some apps as suggested here: http://rootzwiki.com/topic/4198-cant-boot-into-the-new-cwm-recovery-heres-a-quick-fix/ and then went to rom manager and "reflashed" it says succesful but when selecting "boot into recovery" the phone just reboots back into andriod.
2. after 1 and went into magldr and manually selected AD recovery: still get the red errormessage
3. I also tried reflashing by going into magldr and using usb option and then running the DAF file. It says it is connected (so does my pc) but flashing from the DAF executable gives message
---
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
--
Strange thing is: i also get this message when my phone is not at all connected and i run the DAF.exe so i presume there is a connection problem?
What to do now?
---------- Post added at 05:46 PM ---------- Previous post was at 05:30 PM ----------
Ah, hope i can be of use. I solved my own issue: i forgot to run DAF with admin rights.
I also forgot that this reflashing wipes my android installation. Especially because i just wanted to make a new backup with CWM recovery. Gosh... how ironic.
MarsHD2 said:
Everything works fine but I cannot access AD Recovery from MAGLDR after I flashed clockwork recovery to 3.1.0.0 from Rom Manager, I found out that messes up the clockwork recovery from MAGLDR, how can I undo this?
Click to expand...
Click to collapse
Hello there!
When you've got <ERROR: ERROR: Cannot read ramdisk image> there is also a solution.
You've to be sure make a back-up of your SD-card onto you're PC and after you've copied your SD-card then have you formatting this SD-card onto PC or AndroidPhone.
Then when SD-card is formatted finished you have to download magldr 1.13 again and update via datacable and you're phone onto bootloadermenu (color-screened).
Than you've to download CWM recovery 3.2.0.0 and you upload this recovery also via bootloadermenu again (volume down) and when 100% ready you're phone gonna started up and you've push your powerbutton on and let button not go after you seen magldr 1.13 menu.
Then you gonne volume <up/down> and go to AD recovery and you wil see that the message <ERROR: ERROR: Cannot read ramdisk image> disappear and your phone works again normally without these error(s). :victory:
Hello,
I am running android 2.3.7 [typhone v3.6.9- magldr]. I wanted to upgrade my rom, so I got into magldr and then to recovery, but when I choose "ad recovery" I get an error massage in red "ERROR: ERROR: Cannot read ramdisk image "
plese help ...
How can I solve this problem ?
thank's
Reflash recovery and then see it it's reproduces or not.
If you have do a task29,you have to reflash MAGLDR and the recovery who is needed for this ROM.Task29 delete MAGLDR and Recovery.
Maybe you need reflash your device recovery.
You really don't have to task29 your device.
Just download HD2 Toolbox, connect your HD2 to your PC and hit update in the left corner.
Thats it
Hi All,
I have this device for a long time and I have flashed many roms...
Suddenly it's not possible to enter the "AD Recovery" in Magloader ClockworkMod Recovery.
it stuck after "1234 GO GO GO!"
I have tried the following:
1) Re-flash MAGLDR1.13.
2) Repartition with HD2Toolkit (I have European device so I repartition to 200)
Any suggestions?
Flash win mobile 6.5 and then flash magldr again
Sent from my HTC HD2 using Tapatalk 2
Hi All,
I m trying to go back from android to winmobile and my device is stuck...
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship and i have tried to flash HAED SPL 4 and i received error in device id...
In bootloader it appears correctly with SPL-2.08.HSPL 8G XE, and in the white eare it write Serial in in the begining and when I try to flash it change to USB.
The main problem is that I have tried to flash Energy.Leo.21916.Sense2.5.Jul.04 above android it stuck on 4% and I can't reflash anymore, when i try to reflash it stuck on 0% no matter what I do.
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
Please advice...
sagytb said:
I have this device for a long time and I have flashed many roms...
Suddenly it's not possible to enter the "AD Recovery" in Magloader ClockworkMod Recovery.
it stuck after "1234 GO GO GO!"
Click to expand...
Click to collapse
Been having the exact same problem (http://forum.xda-developers.com/showthread.php?p=29868470#post29868470) still noone with any ideas how to fix this?