ok,
so MAGLDR can't load via startup.txt and haret, so is it possible to take a current SD rom and make it bootable via MAGLDR?
Or do we have to wait till the ROM chefs make compatible SD roms or till MAGLDR can boot via instructions in startup.txt?
We have to wait, only magldr compatible roms can be booted from sd.
darg.
10char
first i must say that i have a little experience with installing win 6.5 and android nand roms. I have HSPL 2.08 version and radio 2.15.50.14 version.
lately i installed a miui clk rom and it worked o.k, after a while the phone stuck and i pooled out the battery and after that the rom and the clk was wiped out.
since then i made task29 and installed the radio 2.15.... again then the clk but could not install the cwm because from some reason the pc didnt recognize the phone Through the usb port, so i've installed the magldr 1.13 and then the cmw but now it won't start up (the cwm) and it give me an error, so i decided to try and install win 6.5 again but the phone won't start up.
is anybody know what is wrong or if my phone ended its life on this plant?
my suggestion would be to download hd2 toolkit. task 29 phone then start over. flash magldr then go to maglr option for usb flasher and repartition your phone for your rom of choice. install rom zip on sd card and install
blakphoenix said:
my suggestion would be to download hd2 toolkit. task 29 phone then start over. flash magldr then go to maglr option for usb flasher and repartition your phone for your rom of choice. install rom zip on sd card and install
Click to expand...
Click to collapse
done that with the toolkit and first it didn't flash the task29(usb erorr) after some Struggles i made it but than it didn't flash the magldr Through the dft (again usb erorr) so i flashed it with ruu and than the and the rest is written above.
the toolkit isn't working and on the dft i get alot of usb and connection erorrs, but with ruu flash i dont have this erorrs.
now is it hardware or software problem?
bump!!!!!!!!!!!!!
i alredy install android nand to my htc hd2 with bootloader dft version 1.11
and because i want to expant the memory i want to install the bootloader version 1.3 or higher... i try to upgrade the bootloader via usb flasher ( i allready have downloaded the files i need and the connection is ok...) so all goes ok the installation tell me that the filew are installed ......but nothing happened ...the version is the same magldr 1.11 and i must reload the nand again because i have a mounting error.....
please advice what i am doing wrong.....and what is the right version to have a sd data file to expant the internal memory...
thank you very ....
Have you tried the Toolkit, HD2 NAND Toolkit?
Just enter the bootloader on your phone, and on your pc open the toolkit and choose install magldr.
how can i do it ???
i have a htc hd2 phone and i install the bootloader1.3 i run the clockworkmod recovery and all going ok...but the nand i have allready install its gone and i must reinstalling it....if this happen the clockworkmod no longer works...
and in the end if i install games or programms the internal memory get full and nothing happens with the supposed extarnal in the sd card....
please advice what i must do so all the system works correctly.....
thanks to enyone answer me....
To flash MAGLDR or cLK you have to do it through the SPL bootloader (tri color screen), not through option. #5 USB flasher in MGLDR. That option in MAGLDR is only for flashing custom recovery via DAF file, android via DAF file (this method is obsolete), or a Windows Phone 7 via DAF file. If you have already flashed MAGLDR before you should know how to get to the tri color screen. If not then click on the HD2 guide in my sig, it should help answer a lot of questions you have.
I can't boot any sense magldr rom from sd. I choose "run ad sd rom", it loads kernel and other things but after 10 min at splash screen, start loading my nand rom (icecreamtosti 0.11). I've tried other microsd, format microsd, wipe27 reinstall magldr, change rel_path in startup.txt. But if I install on sd android 4.0 rom (witch using portadroid ultimate) it boots correctly.
I'm very sorry for my English.
Hope I described my problem clearly.
Sent from my HTC HD2 using XDA
Hi,
I've got a problem.
I'm trying to install andriod on my hd2.
Everything goes well untill i start my phone for the first time.
The phone gets stuck on the boot logo of the andriod i installed.
I have tryed the foowing things:
Task29 + install magldr again + different andriod roms.
But notting is working.
I can geth in to the 3 color boot screen and in the magldr. But after i flash my phone it restarts and geth stuck on the andriod boot logo.
I have andriod on the nand. when i flash back to wm6.5 it's working again.
I hope someone have a solution because i realy want andriod on my phone.
Thanks,
Maarten
MasterMaarten said:
Hi,
I've got a problem.
I'm trying to install andriod on my hd2.
Everything goes well untill i start my phone for the first time.
The phone gets stuck on the boot logo of the andriod i installed.
I have tryed the foowing things:
Task29 + install magldr again + different andriod roms.
But notting is working.
I can geth in to the 3 color boot screen and in the magldr. But after i flash my phone it restarts and geth stuck on the andriod boot logo.
I have andriod on the nand. when i flash back to wm6.5 it's working again.
I hope someone have a solution because i realy want andriod on my phone.
Thanks,
Maarten
Click to expand...
Click to collapse
Hi,
Have you flashed ClockworkMod. If you have, is the partition size right?
Im not aware if i installed the ClockworkMod.
How do i find this out or do you have a manual?
When can if find the partition size?
If you mean the magldr partition size than this is 120 mb.
The size of my sd card is 4GB.
MasterMaarten said:
Im not aware if i installed the ClockworkMod.
How do i find this out or do you have a manual?
When can if find the partition size?
If you mean the magldr partition size than this is 120 mb.
The size of my sd card is 4GB.
Click to expand...
Click to collapse
In the MAGLDR menu, go to option 8. AD recovery. Tell me if it boots up. If it doesnt and shows an error, you donot have ClockworkMod. Check this now and we'll procede furthur
Yes i have the ClockworkMod installed.
The option "8. AD recovery" is working because this is the way how i installed the android.
- i used the option: ïnstall zip from sd card.
MasterMaarten said:
Yes i have the ClockworkMod installed.
The option "8. AD recovery" is working because this is the way how i installed the android.
- i used the option: ïnstall zip from sd card.
Click to expand...
Click to collapse
So the roms you have tried are not working. The cause maybe that you have flashed the wrong partition. Which Rom have you tried?
I have tryed the folowing roms:
Android GBLeoR6.1
Sense_2.1_Lite_1.1
Energy™ -.¸¸.·´¯ SensationXL
I found them in the folowing post:
http://forum.xda-developers.com/showthread.php?t=1336700
Don't know the diference or which one is the best.
Do you got any suggestions?
MasterMaarten said:
I have tryed the folowing roms:
Android GBLeoR6.1
Sense_2.1_Lite_1.1
Energy™ -.¸¸.·´¯ SensationXL
I found them in the folowing post:
http://forum.xda-developers.com/showthread.php?t=1336700
Don't know the diference or which one is the best.
Do you got any suggestions?
Click to expand...
Click to collapse
These roms are quite heavy. If they dont work then you probably have a 150mb partition with CWM. I suggest this rom
http://forum.xda-developers.com/showthread.php?t=769026
And before installation by "install zip from sd card" Folow these steps
1. Select "wipe date/factory rest". Wipe your phone. This will clear your internal memory NOT your sd card.
2. Select "wipe cache partition". Wipe it
3. Go to advanced > wipe dalvik cache > wipe it
4. Mount your phone using the mount feature in CWM
5. Copy the rom into the root of your sd card
6. Install it via "install zip from sd card"
7. Reboot. Allow 20 minutes MAX for boot
Tell me how it goes. Always here to help
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
MasterMaarten said:
I have tryed the folowing roms:
Android GBLeoR6.1
Sense_2.1_Lite_1.1
Energy™ -.¸¸.·´¯ SensationXL
I found them in the folowing post:
http://forum.xda-developers.com/showthread.php?t=1336700
Don't know the diference or which one is the best.
Do you got any suggestions?
Click to expand...
Click to collapse
If you want to run these roms, U need a partition of 250 MB. You probably have less than this, thats why its not booting
Well, I did everything you sayed but after waiting a half hour it's still stuck on the andriod boot screen.
why
A wait: I will try a bigger partition.
Where can i change this? At the "HD2 Android NAND Toolkit" i asume.
MasterMaarten said:
Well, I did everything you sayed but after waiting a half hour it's still stuck on the andriod boot screen.
why
A wait: I will try a bigger partition.
Where can i change this? At the "HD2 Android NAND Toolkit" i asume.
Click to expand...
Click to collapse
Then i guesd that maybe your partition is messed up. Run task29 and do it over again. And yes partition the internal memory via NAND toolkit
Sent from my HD2 using XDA
MasterMaarten said:
Well, I did everything you sayed but after waiting a half hour it's still stuck on the andriod boot screen.
why
A wait: I will try a bigger partition.
Where can i change this? At the "HD2 Android NAND Toolkit" i asume.
Click to expand...
Click to collapse
Use whichever partition is stated in the OP of whichever ROM you're trying to use. Too small a partition means that the ROM won't boot. You can either change this via the HD2 NAND Toolkit or by downloading CWM, opening the file 'flash.cfg' with notepad, editing system ya to whatever value your ROM states it should be and flashing with DAF.exe.
Ok, I changed the partitions size to 445 MB at Magldr (in the "HD2 Android NAND Toolkit"). Flashed the Magldr again. Restart the phone so the android loads again but he is still not booting.
Flashed android again but stil no luck.
MasterMaarten said:
Ok, I changed the partitions size to 445 MB at Magldr (in the "HD2 Android NAND Toolkit"). Flashed the Magldr again. Restart the phone so the android loads again but he is still not booting.
Flashed android again but stil no luck.
Click to expand...
Click to collapse
This may seem weird but have you flashed the correct radio?
I flashed the radio a long time ago. So i don't know witch one i have installed.
If i go to the 3 color screen it shows me the folowing information:
PB81100 HX-BC
SPL-2.08.hspl 8G XE
CotullaHSPL 0x40
MasterMaarten said:
I flashed the radio a long time ago. So i don't know witch one i have installed.
If i go to the 3 color screen it shows me the folowing information:
PB81100 HX-BC
SPL-2.08.hspl 8G XE
CotullaHSPL 0x40
Click to expand...
Click to collapse
Install windows mobile 6.5. Go to settings and search for software or system information. Look for radio version. If its not booting, its probably likely you dont have the correct radio installed.
Rom version: 2.15.50.14
MasterMaarten said:
Rom version: 2.15.50.14
Click to expand...
Click to collapse
O DARN!, i thought i almost had it.....well give me time, i need to think...Dont worry someone will figure it out for you
(check 2.08.HSPL)+ Task29 + install radio rom + install magldr + install Recovery (5/200/5 etc.. it depends on your android ROM properties) + Android ROM
Radio ROM 2.15.50.14;
http://www.mediafire.com/?1th8o158r2t6dba
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
http://www.mediafire.com/?2qz0xa7xfxney47
And true Android ROM for your HTC HD2 (TMOUS or EU)
Well i already did that like 3 times. With the toolkit. The radio + task 29 + magldr + HSPL are already installed and working.
I will try the TMOUS or EU rom.
Sequence have to apply exactly that i said. and you already did it.
what is your ROM? Did you do recovery? Did you do proper partition in your sdcard like EXT3 or EXT4?