Database Users

no one want reply me :=(

with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote

muslim2009 said:
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
Click to expand...
Click to collapse
Hi
Sorry to hear your problem, try to read this guide http://forum.xda-developers.com/showthread.php?t=406721 and the stickies in the Elf Upgrading
Hope you can save your device

i have read it but i dont find the sollution :=(
can you help me plz ????

muslim2009 said:
i have read it but i dont find the sollution :=(
can you help me plz ????
Click to expand...
Click to collapse
Hi
Does it go into bootloader (3 colors )?

no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(

nothing again
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco

muslim2009 said:
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
Click to expand...
Click to collapse
Hi muslim2009
I tried a few searches but all the results say you need the bootloader screen , are you sure you didn't miss a step in hard reset or bootloader mode :
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
I sincerely hope it helps
I was also born in Morrocco at Casablanca and lived there until age 16. Anyway I'll continue searching.
Tito

thanks for help,but it won't work :=(..
[email protected]
add me if i can show you my htc ..
thanks from morocco

I'm not sure if it's possible with the HTC Touch, but I know when I was playing around with an old iMate SP3i (smartphone) I was able to do a ROM upgrade from files on the memory card.. Took me a few attempts to get it right, but it worked. I think I also upgrade my SP5 to WM6 from WM5 that way, but I'm not too sure about that.
Either way, a basic idea of what I'm talking about can be found here, but that is obviously for a different phone.. Maybe some of the more common members here would have better luck finding a similar process on a Touch....?

maybe its will be workin but what marterial i will need for this opperation??

On some HTC devices (cheetah, for example) if you put the ROM file (.bin) in the root directory of the SD card, the phone will flash directly from the SD card.
I think you do require to put the phone into bootloader for that to work though ... not 100% sure, but probably worth looking up.

Ok... Been trying to search for more information for you, but with not really knowing all the correct terminology it's taken me a while longer than I thought. I've found two threads that have some of the information I was looking for:
Recover / Revive your dead / bricked HTC ELF or ELFIN
Recover HTC Touch from tricolors RUU boot-loader (Mtty)
The second link is actually found inside the 2nd post (I think) of the first thread I mentioned here, looks like they are linked in some way. Your best bet is to read through and see if it is something that may help. Let us know if this works for you...?

thanks you man,i was read the first link befor..i will see for the second
hope will work.thank you again

My HTC Magic is bricked

I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?

You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444

Caid444 said:
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Click to expand...
Click to collapse
Hi Caid, thanks for the reply! sorry for the short message without details.
Here is the answer for your first question (sadly, the rest of questions can be skipped):
Does it turn on?
It doesn't
It was after follow the guide i mentioned before. I tried to update the SPL, but something went wrong and my phone didn't turn on again.
So... I think I have to accept the fact is not going to work again.
Is there any kind of service able to fix this?
Anibal

No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?

please i need some help htc touche cruise
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help

parrot5 said:
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
Click to expand...
Click to collapse
I'd really like to say it DOES something... but it doesn't . I tried Volume down + power, back + power and several more combination always taking out the battery and putting it back.
It's bad... Do u know if there's any hardware service for this?

Just a wild guess, but since the phone sucks more battery, then a vampyre on rampage.
Could it be an idea, to charge the battery before, or have the usb cable pluged in, when you press back+home? (the same buttons you used to enter fastboot)

I'm pretty sure what you're trying to say is, you know enough about the phone to know how to bring it into it's multiple boot options, and none of them make the phone even burp. So there's no need to tell you to press this button plus that button, or insert usb or remove usb, or battery or such, because you've already done all that.
Well, I'd have to agree with you that it's dead. Unfortunately, there's nothing to do at the moment. I'm guessing (or maybe just hoping) that in the future there will be an unbricker for our phone, much like those available for many htc branded winmo phones. In the meantime, how old is your phone? Can you still bring it back?
Caid.
444
p.s To anyone else who's trying to figure this out, let's assume that he's already tried the many variations of recovery procedures and that it's still not working.

argc79 said:
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
Click to expand...
Click to collapse
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).

Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade?
(I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
That's how my brick arrived ! Tried Hard SPL, after installing the one you suggested. Yours okay, Hard SPL no. But even after installing the spl, no fastboot adb.

BRICKED by HARD SPL ( the recommended )
Same here, I have just bricked my new vodafone HTC Magic (Vaffanc...)
downloaded from here: http://code.google.com/p/android-roms/downloads/list?q=label:SPL
I hope something can be done. It is not reacting to power button at all.

Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!

byronhero said:
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
Click to expand...
Click to collapse
as far as i can see no need to flash spl on vodafone magic. i have the same phone and all i did was root with Rav1.1.1G.img and flashed rom of my choice. you have flashed phone with g1 spl and it actually says g1 on the link you provided..........can't see how you missed it. with phone off press home+power button as that bring up recovery image. Rav image file is safer due to that. i am sure if hardspl was available for Magic it would be posted on here as a sticky

hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana

thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
You did brick one with the hardSPL and now you bricked another with the same stuff? Didn't you learn the first time? Only way is to go back to the store and tell em you did it again.

thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
It seems to me you need to go back to basics and start here

A noob question but what exactly does flashing a new SPL unlock.
I got my Vodafone UK HTC magic and simply Downloaded a 32B ROM and used nandroid backup to apply the update.zip and it installed fine and can use Root required apps.

hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?

I Can not understand how can this be possible. Why guys all of you, don't read before trying to change your SPL???? You even don't need any changes about it?! Why do you try to change the SPL? Do you know what that SPL does? I think most of you - don't.
My next question is why all of you are trying to flash the G1 SPL onto Magic phone? Are you crazy or what? There is NO HARDSPL for Magic (G2, Sapphire or whatever you want to call this device)!
The SPL collection is posted in this forum by Amon_Ra, and if someone want to change the SPL can do this by downloading some of the SPL collections posted here.

say2k said:
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
Click to expand...
Click to collapse
Power off your phone! Then press and HOLD the "back button", while holding it press once the red one(which you usually use to power on the phone). It will power on (i hope). If you get in fastboot mode then everything will be fine.

Gene Dead

My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.

pravin.kamdi said:
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
I have tried to connect using MTTY also but it is not detected using usb. help less now with no bootloader.
Click to expand...
Click to collapse
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .

deepv84 said:
don't panic
to enter boot loader just on device
press and hold camera button and press soft reset button .
Click to expand...
Click to collapse
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button

pravin.kamdi said:
No luck. I have tried to go to bootloader using press and hold camera button and press soft reset button
Click to expand...
Click to collapse
remove battery and then hold power button for 20 seconds (this will remove stored power from device )
then insert battery
press and hold camera button then press power to bootloader
hope this will work

Pravin,
What happened??
Did it work?

no bro i have tried power cycling also nothing is working.

ok dude did it worked?
if not tell me i'll help you via team vewer to unbrick it
dont worry just dont panic i've unbricked mine too

what happen
hey bro ,,
what happen, r u able u restore u r set...... if not tell us ...
bye

My Gene also dead
Please help me,,
i try to update rom but it fail,
now when i start my gene it show color screen...
please help me what i do
my yahoo chat id [email protected]

added you on yahoo

hey amit ,,
can u explain more in detail what u do exactly with u r handset..
.......

When i try to update my rom, i don`t know what happan but now, my phone not start when i try to start only blue and red light flash. nothing.
when i press reset with camera button i saw three color screen.
Tell me what i do..............

hello gurusingh,
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.

hi gurusinghbrar,
My Htc p3400, can not start......
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button. but result is same...
#No indication during Charging.,no usb detected in PC.
please help how i can recover my device.....
sanmukh singh
[email protected]

HTC P3400i GENE100 Dead
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali

prgawali said:
I have a HTC P3400i GENE100. I successfully installed orefkov SPL and then upgraded my original ROM WM 6.0 to cooked wm 6.5. After installation my device was too slow than before hence I flashed it with RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe. After flashing it 100 % my New Gene restarted, but didnt boot to booting screen. Its not going into bootloader mode also. It shows blank screen i.e. black. I tried several combinations of keys (Camera + Power button or Camera + Reset or by pressing both "-" button + Reset) for going it to bootloader mode. But none of them working. When I plug in charger the green & red light blinks once and nothing else. Same if I press reset with stylus, the green & red light blinks once and nothing else happens. I know that I have bricked my New Gene, when I flashed the ROM, which was meant for Old Gene, which I came to know after reading the posts in this forum. I have to use JTAG Method for recovering my Gene. Hence I have read many posts about it in this forum. But can any one of the great masters here, help me with a proper guide that can help me recover my Gene 100%.
Thank you for spending your valuable time in reading this post.
Regards
Parag Gawali
Click to expand...
Click to collapse
check ur mail

Gene back to life
Thanks to Sumeet...
I got my HTC P-3400i New Gene back to life. It works better too. Sumeet is the man, who has given life to my entirely dead gene. I thank to him and suggest needy to contact him in their cases.
Thanks to XDA-developers Forum too...
Regards
Parag Gawali

same problem i had pls help me
Fido/Sumeet, please help me my gene got bricked when i was downgrading my gene from 6.1 to stock rom. after successful rom update my gene doesnt got restarted i'm getting black blank screen.
pleaseeeeeeeeeeee guys help me.....

HD 2 dead OR NO DEAD ???!! Help please

So a friend have a problem with a ROM, and i decides to flash rom radio and with an other ROM and when i'm flashing HD2 freezing and lock at 53%, i trying to flash with any others Roms and i have a big problem, hd2 no reboot,, and no reboot in bootloader mode too after :S
i trying the Hard Reset manual and nothing !!
Who can help me ???
Sorry for my bad english!
Friendship Kindly.

if you can't get into bootloader then it is probably dead.
So volume down while pressing the reset key doesn't do anything?
If you plug it into a charger does the red led come on?
What version hd2 is it?

Thank's for your answer so,
i can't make it in bootloader even if i press volum down button and press the end key, he does nothing :s but he return in bootloader mode one time / 50 ...
when he connect to a source i don't see the red led for charging batterie :s
and i don't know what is this model, it's an HD2
And the last time i boot it, it's written Software uptade fail, try again with a /!\

If its a US T-Mobile one (has T-Mobile at the top and green & red buttons at the bottom) then its most likely that the radio he has flashed to it is the wrong one.
If this is the case, then there is no fix.
Otherwise, its best to see if you can send it back for repair

[Q] dead device

Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!

rupesh baviskar said:
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
Click to expand...
Click to collapse
hi
if u can get ur tricolor screen then try this
connect the usb cable to pc and see if u get the USB words on the phone tricolor screen if so good try flashing any official ROM the same happened to my phone long back did the above got my phone back asuming u have done HSPL for ur phone if u have not done that then the only way is to take it to service
hope it helps good luck
thanks
hari

Wrong forum.. Touch P3450 is not a touch 3g , its the original touch (ELF version)
but i will try and help as i have owned both.
if your hardware buttons are not working it could be possible that your send and end keys are stuck down as this key combo brings up the hard reset you are talking about.
think you are going to have to open it as it sounds like a hardware fault, and if you cannot get into bootloader you cannot flash
if it was working alright before this is not the case, but either way you will have to fix your camera button and get into bootloader