Database Users

[Q] Stuck on Samsung logo, unable to reach recovery mode

i flashed cwm nd flashed 2 3 roms now unable to reach recovery help p[lease..........:crying::crying::crying::crying::crying::crying::crying::crying:

vishuhtc said:
i flashed cwm nd flashed 2 3 roms now unable to reach recovery help p[lease..........:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
are you able to access download mode??? If yes then get a odin package for your device and flash it.

amit34521 said:
are you able to access download mode??? If yes then get a odin package for your device and flash it.
Click to expand...
Click to collapse
how to access download mode

maybe the battery is low..charge it full...then you can enter recovery

sasuke150 said:
maybe the battery is low..charge it full...then you can enter recovery
Click to expand...
Click to collapse
battery is more than 80 n% now when i am trying to charge also only samsung screen shows up

it's bootlop, you just flash stock rom via odin....
see the sticky post in development to do that !
vishuhtc said:
battery is more than 80 n% now when i am trying to charge also only samsung screen shows up
Click to expand...
Click to collapse

VillaVor said:
it's bootlop, you just flash stock rom via odin....
see the sticky post in development to do that !
Click to expand...
Click to collapse
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:

vishuhtc said:
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
Click to expand...
Click to collapse
No need to cry,. Even i have faced that..
First find out a stock Rom using odin mode then
Switch off your mobile
Then press Menu+Vol Down+Power button.. Now odin mode ll start
Now connect ur mobile to pc thru usb cable
Now open odin Sw, the system ll automatially detects ur device(follow the software installation process)
Then use the downloaded stock Rom to flash ur mobile.
It may take only 5 to 10 minutes for installation..hope it ll works for u.
Sorry for my English if u feel hard to understand
Sent from my GT-S5360 using xda app-developers app

Dont use skin1980 or cwm bla bla
For flashing
Use CWM-Madteam-Galaxy-Y for better.
Sent from my GT-S5360 using xda premium

Unplug charger, press Home + Vol Down + Power Button together
Hit Thanks If I Helped You
vishuhtc said:
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
Click to expand...
Click to collapse

- download the required firmware bundle ( download ur needed firmware bundle in this link [Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages )
- install Kies, or Samsung driver pack
- unzip the package, You'll get 3 *.tar (or tar.md5) files
- download Odin3 1.84 or 1.85 (click here)
- stop Kies
- stop all active ADB sessions
- start odin
- do backup of your data and apps
- charge your SGY at least 75%
- remove SGY from USB or charger
- start the device in Download mode
*HERES HOW TO GO TO DOWNLOAD MODE*
-power off Your SGY
- wait 30 sec
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
*NOW IN ODIN PC(
- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
SOURCE:[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages

Download this stock Rom(2.3.6 DXKJ3)..and flash through Odin and go to download mode by pressing simultaneously Vol. down+power+home
Hit thanx if u like my work

74M3NUMB3RS said:
- download the required firmware bundle ( download ur needed firmware bundle in this link [Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages )
- install Kies, or Samsung driver pack
- unzip the package, You'll get 3 *.tar (or tar.md5) files
- download Odin3 1.84 or 1.85 (click here)
- stop Kies
- stop all active ADB sessions
- start odin
- do backup of your data and apps
- charge your SGY at least 75%
- remove SGY from USB or charger
- start the device in Download mode
*HERES HOW TO GO TO DOWNLOAD MODE*
-power off Your SGY
- wait 30 sec
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
*NOW IN ODIN PC(
- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
SOURCE:[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Click to expand...
Click to collapse
i tried odin mode but when my device is connected it says device cannot start error message
one of the devices connected is malfunctioned is the error message i am constantly getting
never mind i successfully installed stock firmware thankyou all for your help

vishuhtc said:
i tried odin mode but when my device is connected it says device cannot start error message
one of the devices connected is malfunctioned is the error message i am constantly getting
never mind i successfully installed stock firmware thankyou all for your help
Click to expand...
Click to collapse
please tell me how could you solve this problem and flash stock rom without using odin? i'm unable to access recovery mode and my device is not readable on pc even with drivers installed

If your device is not recognised try to install drivers again if its still their it might be hard brick
So you need jig cable or go to service center in india they will charge 170 rupee
i am so perfect at sleeping i can do it with my eyes closed
sent from -
xeonzlot.blogspot.com

I too faced the same.problem ...
where I was not able to go to recovery....
and my phone was also not detected in pc...It was fixed with these silly steps...
I did this:
Frst I uninstalled the Samsung drivers...
restarted the pc...
Installed the drifers...
then I used another USB cable and connected to the USB slot behind one of my pc...
then went to download mode and the phone was detected and also successfully flashed stock Rom.....
Hope this works for you too...

Stuck in downloading mode after trying to root using CF-Root

I tried to root my grand prime sm-g530h using the oding flashable file from https://autoroot.chainfire.eu/#odin. I tried this version https://download.chainfire.eu/945/CF-Root/CF-Auto-Root/CF-Auto-Root-fortunave3g-fortunave3gxx-smg530h.zip to root my phone. I enabled usb debugging before rooting. Then backed up all my data. Then I went into download mode by pressing "volume down+home+power" and connected my phone to laptop. Odin was already running in administrative mode and it detected my device. I loaded the file using the ap button and pressed the start button.
At this point odin said "Reset" and my phone restarted automatically into the download mode again. and it got stuck there. nothing was changing in odin either, the last log was "Removed".
I searched for solutions online and one of them said to uncheck "auto-reboot" before starting. I did that. and this time odin said "pass". then I unplugged my phone and removed the battery and tried to go into recovery mode using "volume up+home+power" but my device keeps on rebooting itself. and if I just try to switch on my device using the power button it goes into download/odin mode directly.
I searched for solutions again and tried the following: pressed the "volume down+home+power" but when the warning came instead of pressing volume up(continue), I pressed volume down(restart), but nothing happens! it still goes into odin mode directly and is stuck there!
I don't know what to do anymore! Can anyone please help? I don't know how to fix it!

I have the same problem!! Please HELP!!

Help: S7 edge Bootloader Exception For NOT Rooted!!

Hello
Before 1 week I return from my work and I try to turn on my s7 edge to check my emails, messages, etc
But it doesn't work, I try to charge it but its dead and no reaction
So I plug it in my laptop and then I get a message with ONLY RED words say bootloader... *((USB Dubbing its Turned ON I forget to turn it OFF))
Acctually before I get this problem, I Try to use the DR.fone app in desktop to recover a lost photo for non-root device, after all I don't find the pic, then I close it but I forget to turn off the USB Dubbing and I forget to delete it
Please help guys ,my warranty didn't do any thing
So if there is no way to relive my device, I need just my files back its very important, ((samsung backup turned off))
Thanks!
imgur.c0m/a/Y7u7W
Imgur.c0m/a/pDQdy
Note: im new in xda so I can't put pictures or url
So I change com to c0m
Change it to see the problem

Hello, download the latest bootloader of the S7Edge, and then put your phone in download mode. With odin, flash the bootloader (BL case) to your phone.

NeoVander said:
Hello, download the latest bootloader of the S7Edge, and then put your phone in download mode. With odin, flash the bootloader (BL case) to your phone.
Click to expand...
Click to collapse
Thank you! But acctually im noop in odin
so can u tell me what I do step by step? And another thing
I CAN'T get into the download mode, it won't work with me,
But when I connect it to odine, I can see my device there and I can adding files maybe
So where I can download the stuff and what I do?
+
There is a way to recover my data?
Thanks!

Phone part :
~ Get into Odin Mode :
Press "Power" + "Volume Down" 8 seconds
Then press "Volume Down", "Power" and "Home" until you see a message, then press "Volume Up"
You are now in the Odin Mode / Download Mode.
Computer part :
~ Download the latest BootLoader and Modem here : https://www.androidfilehost.com/?w=files&flid=54002
~ Download the latest odin here :
http://odindownload.com/download/Odin3_v3.12.3.zip
~ Start Odin, and in the "AP" case, select the "bootloader".tar.md5
~ Connect the S7 Edge to your computer
~ Press "Start"
The phone should reboot

NeoVander said:
Phone part :
~ Get into Odin Mode :
Press "Power" + "Volume Down" 8 seconds
Then press "Volume Down", "Power" and "Home" until you see a message, then press "Volume Up"
You are now in the Odin Mode / Download Mode.
Computer part :
~ Download the latest BootLoader and Modem here : https://www.androidfilehost.com/?w=files&flid=54002
~ Download the latest odin here :
http://odindownload.com/download/Odin3_v3.12.3.zip
~ Start Odin, and in the "AP" case, select the "bootloader".tar.md5
~ Connect the S7 Edge to your computer
~ Press "Start"
The phone should reboot
Click to expand...
Click to collapse
Thank you!! I will do it soon...

[Guide] How to unbrick the J7 SM-J730F [Soft-Brick Solution] [Firmware Flash Guide]

In this guide, I will tell you how to unbrick your SM-J730F, in case it is stuck on the boot logo.
So you managed to screw up your phone, and now it won't boot? Is it stuck on the "Samsung Galaxy J7 - POWERED BY ANDROID" boot logo screen forever? And you can't get to fix it?
This guide is for you.
Note: As always, please follow the steps cautiously so that you don't end up bricking your device even harder. I am not responsible for any damage done to your device. All these guides were tested on my phone and confirmed working.
Requirements:
1. PC
2. USB cable
3. Stock Firmware for the SM-J730F - Download Here (uploaded it to MEGA for you guys since the download speed on other websites are a bit bad);
4. Odin v3.12.7 - Download Here;
Instructions:
1. Download ODIN from the link above to your PC and extract the archive contents to C:\ODIN (create a new folder);
2. Download the stock firmware from the link above and place it in the C:\ODIN folder;
3. Connect the USB cable from your phone to your PC;
4. On your phone, hold down the buttons Volume Down + Power Button to force reboot your phone;
5. When the Samsung logo disappears from the screen, IMMEDIATELY hold down these buttons: Volume Up + Power Button + Home Button until you enter Recovery mode.
6. Once in Recovery Mode, select the option Wipe data/factory reset and press Yes when it asks for confirmation (this is a MANDATORY step);
7. DON'T reboot your phone. WHILE STILL IN RECOVERY MODE, hold down the buttons Volume Down + Power Button + Home Button to enter Download Mode straight from Recovery Mode;
8. Now you should see this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9. Press the Volume Up button to enter Download Mode. This screen should pop up:
10. Now, back to your PC. Open ODIN, and make sure that it says Added!! on the left. If it doesn't, re-connect the USB cable. Click on the AP button, select the firmware file that you downloaded, let it check the md5 hash, and after it's done, click on the Start button to begin flashing the new firmware and repairing your phone:
11. You should see the bar on your phone under Downloading begin filling up. This means that your phone is currently being flashed. After this process is done, ODIN should say PASS! at the top left of the window, under its' name and logo.
12. ODIN will reboot your phone automatically. After the reboot, you shouldn't be stuck on the boot logo anymore and your phone will proceed to the usual first time set up that you have to go through every time you do a factory reset.
Thanks for reading! I hope my guide has helped you un-brick your phone. As always, if you have questions or encounter a difficulty while following this guide, just leave a reply and I or other members will try to assist you.
Please do not be immature and have a bad attitude when you reply, I will not help you if you do. This has worked on my SM-J730F, and if something goes wrong, it's your fault. As I already said I am not responsible if you brick your device further. But I will still try to assist you.

I don't recommend that mega site. Download it from sammobile like anytime else and wait aprox. an hour (If you don't have a premium and don't want it)
Thank you. I wasn't know you can go download mode from recovery.

hello,
by holding vol-down-home-power i got a display which is not the download mode
it says :
Factory Mode
Auto Test
Manual Test
Item Test
Test Report
Nonautomatic Report
Debug Test
Clear eMMC
Version
Reboot
what is wrong?

Thank you so much for this guide!

When I woke up this morning, my Samsung J7 2017 (SM-J730F) was plugged in. However, the screen was only showing the white Samsung screen it normally shows when I turn the phone on if it is turned off.
I disconnected the phone from the charger and tried to use the phone. Unfortunately it was stuck on this screen and nothing changed that. Until I used the combination of power button, Vol Down and Home button.
The white screen suddenly disappeared and the phone went all black. It has been black ever since. Nothing changes that.
I tried connecting it back to the charger: nothing. Connect it to the charger of my girlfriend who has the same phone: nothing. Connect it to my laptop: Nothing. Try to hard reboot (power button and Vol Down): Nothing. It seems like my phone it totally dead and I don't know how to check if it really is, and if there's anything I could do to fix it.
Has anyone advice on the things I can do?
Thanks in advance.
Kind regards.

Solution to the same problem
Hi ... I have the same problem stuck on white screen ... my device is samsung j730g ,, flashing is successful but after entering the initial boot an error appears (no command). I have repeatedly flashed the same result, can anyone help luck solving my problem? Thanks bro

ScarXL said:
In this guide, I will tell you how to unbrick your SM-J730F, in case it is stuck on the boot logo.
5. When the Samsung logo disappears from the screen, IMMEDIATELY hold down these buttons: Volume Up + Power Button + Home Button until you enter Recovery mode.
Click to expand...
Click to collapse
I can't access recovery mode, and when i flash rom Odin says pass but the phone is still in boot loop. What should i do?

I wish I knew too
---------- Post added at 04:49 AM ---------- Previous post was at 04:35 AM ----------
biohzd91 said:
When I woke up this morning, my Samsung J7 2017 (SM-J730F) was plugged in. However, the screen was only showing the white Samsung screen it normally shows when I turn the phone on if it is turned off.
I disconnected the phone from the charger and tried to use the phone. Unfortunately it was stuck on this screen and nothing changed that. Until I used the combination of power button, Vol Down and Home button.
The white screen suddenly disappeared and the phone went all black. It has been black ever since. Nothing changes that.
I tried connecting it back to the charger: nothing. Connect it to the charger of my girlfriend who has the same phone: nothing. Connect it to my laptop: Nothing. Try to hard reboot (power button and Vol Down): Nothing. It seems like my phone it totally dead and I don't know how to check if it really is, and if there's anything I could do to fix it.
Has anyone advice on the things I can do?
Thanks in advance.
Kind regards.
Click to expand...
Click to collapse
Sounds like your charging port needs replaced

is this firmware compatible with any J730F phone ?
my phone is:
model: SM-J730F
Baseband version: J730FXXU4CSED
Build number: PP1.180610.011.J730FXXU4CSF1
it it stuck in bootloop help me please

ScarXL said:
In this guide, I will tell you how to unbrick your SM-J730F, in case it is stuck on the boot logo.
So you managed to screw up your phone, and now it won't boot? Is it stuck on the "Samsung Galaxy J7 - POWERED BY ANDROID" boot logo screen forever? And you can't get to fix it?
This guide is for you.
Note: As always, please follow the steps cautiously so that you don't end up bricking your device even harder. I am not responsible for any damage done to your device. All these guides were tested on my phone and confirmed working.
Requirements:
1. PC
2. USB cable
3. Stock Firmware for the SM-J730F - Download Here (uploaded it to MEGA for you guys since the download speed on other websites are a bit bad);
4. Odin v3.12.7 - Download Here;
Instructions:
1. Download ODIN from the link above to your PC and extract the archive contents to C:\ODIN (create a new folder);
2. Download the stock firmware from the link above and place it in the C:\ODIN folder;
3. Connect the USB cable from your phone to your PC;
4. On your phone, hold down the buttons Volume Down + Power Button to force reboot your phone;
5. When the Samsung logo disappears from the screen, IMMEDIATELY hold down these buttons: Volume Up + Power Button + Home Button until you enter Recovery mode.
6. Once in Recovery Mode, select the option Wipe data/factory reset and press Yes when it asks for confirmation (this is a MANDATORY step);
7. DON'T reboot your phone. WHILE STILL IN RECOVERY MODE, hold down the buttons Volume Down + Power Button + Home Button to enter Download Mode straight from Recovery Mode;
8. Now you should see this screen:
9. Press the Volume Up button to enter Download Mode. This screen should pop up:
10. Now, back to your PC. Open ODIN, and make sure that it says Added!! on the left. If it doesn't, re-connect the USB cable. Click on the AP button, select the firmware file that you downloaded, let it check the md5 hash, and after it's done, click on the Start button to begin flashing the new firmware and repairing your phone:
11. You should see the bar on your phone under Downloading begin filling up. This means that your phone is currently being flashed. After this process is done, ODIN should say PASS! at the top left of the window, under its' name and logo.
12. ODIN will reboot your phone automatically. After the reboot, you shouldn't be stuck on the boot logo anymore and your phone will proceed to the usual first time set up that you have to go through every time you do a factory reset.
Thanks for reading! I hope my guide has helped you un-brick your phone. As always, if you have questions or encounter a difficulty while following this guide, just leave a reply and I or other members will try to assist you.
Please do not be immature and have a bad attitude when you reply, I will not help you if you do. This has worked on my SM-J730F, and if something goes wrong, it's your fault. As I already said I am not responsible if you brick your device further. But I will still try to assist you.
Click to expand...
Click to collapse
hi i have the sm-s737tl and i have tried everything in your guide but (using my firmware) i still can not get the recovery mode to mount any help would be great thank you

help
ljgator29 said:
hi i have the sm-s737tl and i have tried everything in your guide but (using my firmware) i still can not get the recovery mode to mount any help would be great thank you
Click to expand...
Click to collapse
hi i have the sm-s737tl and i have tried everything in your guide but (using my firmware) i still can not get the recovery mode to mount any help would be great thank you

hi i have the sm-s737tl and i have tried everything in your guide but (using my firmware) i still can not get the recovery mode to mount any help would be great thank you
---------- Post added at 11:08 AM ---------- Previous post was at 11:07 AM ----------
ljgator29 said:
hi i have the sm-s737tl and i have tried everything in your guide but (using my firmware) i still can not get the recovery mode to mount any help would be great thank you
Click to expand...
Click to collapse
. HELLO
---------- Post added at 11:09 AM ---------- Previous post was at 11:08 AM ----------
duxExes said:
I don't recommend that mega site. Download it from sammobile like anytime else and wait aprox. an hour (If you don't have a premium and don't want it)
Thank you. I wasn't know you can go download mode from recovery.
Click to expand...
Click to collapse
hi i have the sm-s737tl and i have tried everything in your guide but (using my firmware) i still can not get the recovery mode to mount any help would be great thank you

HI, I have a similar problem, j730f stuck on Samsung logo after trying to root it. i has tried rooting by flashing " ROOT-J730F-U4-Android 9 Pie " this using odin, at first it seemed like it worked, odin said reset, as the tutorial indicated, but since then I'm stuck in a boot loop.
I can access the recovery mode but factory reset wont work, ("Failed to clear BCB message, failed to find /misc partition")
I tried flashing stock firmware using odin but it keeps failing:
on my phone it says: "check fail(bootloader) device:7 binary 6
odin:
<ID:0/010> Odin engine v(ID:3.1401)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 2965 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> sboot.bin
<ID:0/010> param.bin
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help I am stuck with no phone.
Thank you!

Help! Soft/Hard Bricked my Galaxy A5 and not sure what to do. (will donate to helper

I was rooting to get snaptools, everything went good till i got xposed and now its stuck on the "powered by android" screen. Can someone help/

Press all buttons on your phone at the same time for a while. It will be off.
Download latest firmware for your phone from sammobile. Download Odin and tap AP ( or PDA ) and find your firmware.
Hold Volume down + Menu button + Power button for 3 seconds and u will see a download mode. Press volume up button then your odin's ID.Com box will be blue or yellow ( it changes with odin versions). Then press start and wait for 3 to 5 mins. It will be boot. Good luck.
Note : Make sure u have samsung drivers installed on your pc first.

senemir said:
Press all buttons on your phone at the same time for a while. It will be off.
Download latest firmware for your phone from sammobile. Download Odin and tap AP ( or PDA ) and find your firmware.
Hold Volume down + Menu button + Power button for 3 seconds and u will see a download mode. Press volume up button then your odin's ID.Com box will be blue or yellow ( it changes with odin versions). Then press start and wait for 3 to 5 mins. It will be boot. Good luck.
Note : Make sure u have samsung drivers installed on your pc first.
Click to expand...
Click to collapse
tried this already, getting "failed" in odin screen. I have the Samsung Galaxy A5-SMA500W ...

solved it , can someone link me a xposed framework for my version? so i dont go through this lol