Related
Hello Friends,
I am new user of XDE Development forum. If anything wrong then really sorry.
Anyway, I have an android device Samsung Galaxy Y GT-S5360. I need to install custom Rom. I have tried many times but failed. Here i am telling about the the thinks i have done already but didn't stressful.
I have downloaded
1.din3 v1.85.
2. Galaxy Y Rom from Sammobile.
That files only include one file called: S5360DDLA1_S5360ODDLA1_S5360DDLA1_HOME.tar.md5
3. I didn't find any
"pit" binary file
"DefaultCalDataWithBoot_...." md5 file
"PDA_...." md5 file
"MODEM_...." md5 file
"GT-S5360-MULTI-CSC-...." md5 file
But in a tutorial of Galaxy y flashing they said these files needed to Update Rom.
4. When i pressed at starting time Volume Down+ Home+ Power then show this message
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
5. My phone doesn't have rooted. Now i am unable to go to the recovery mode by pressing Volume Down+ Home+ Power Button.
I need a complete solution to How To Update My Galaxy Y Rom from PC.
Thanks in advance
find the thread of doky he has the stockrom...if you want a custom just flash one using CWM..
Step by step tutorial - Official updates with ODIN
alaminip said:
Hello Friends,
I am new user of XDE Development forum. If anything wrong then really sorry.
Anyway, I have an android device Samsung Galaxy Y GT-S5360. I need to install custom Rom. I have tried many times but failed. Here i am telling about the the thinks i have done already but didn't stressful.
I have downloaded
1.din3 v1.85.
2. Galaxy Y Rom from Sammobile.
That files only include one file called: S5360DDLA1_S5360ODDLA1_S5360DDLA1_HOME.tar.md5
3. I didn't find any
"pit" binary file
"DefaultCalDataWithBoot_...." md5 file
"PDA_...." md5 file
"MODEM_...." md5 file
"GT-S5360-MULTI-CSC-...." md5 file
But in a tutorial of Galaxy y flashing they said these files needed to Update Rom.
4. When i pressed at starting time Volume Down+ Home+ Power then show this message
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
5. My phone doesn't have rooted. Now i am unable to go to the recovery mode by pressing Volume Down+ Home+ Power Button.
I need a complete solution to How To Update My Galaxy Y Rom from PC.
Thanks in advance
Click to expand...
Click to collapse
--------------------
Downloadload DDLA1 from this link
http://hotfile.com/dl/146493408/c579b55/S5360DDLA1_S5360ODDLA1_ODD.zip.html
extract this zip file
Follow the steps - with odin installation
1. connect your mobile with pc
2. open odin
3. swithch off your mobile
4. go to download mode (Press Down volumu key + power + home buttons)
5. in odin, it showing com port in yellow color when your device detect.
Then browse files
PIT ---------- -totoro_0623.pit
Bootloader ---- BOOT_S5360DDLA1_REV05.tar.md5
PDA ---------- PDA_S5360DDLA1_REV05.tar.md5
Phone -------- MODEM_S5360DDLA1_REV05.tar.md5
CSC ---------- GT-S5360-MULTI-CSC-ODDLA1.tar.md5
then press start button.
I am not resposible for any damage or any other things to your devise, lot of people and me also try this method, there is no proble to me.
krishna_nirvana said:
--------------------
Downloadload DDLA1 from this link
hotfile.com/dl/146493408/c579b55/S5360DDLA1_S5360ODDLA1_ODD...................
extract this zip file
Follow the steps - with odin installation
1. connect your mobile with pc
2. open odin
3. swithch off your mobile
4. go to download mode (Press Down volumu key + power + home buttons)
5. in odin, it showing com port in yellow color when your device detect.
Then browse files
PIT ---------- -totoro_0623.pit
Bootloader ---- BOOT_S5360DDLA1_REV05.tar.md5
PDA ---------- PDA_S5360DDLA1_REV05.tar.md5
Phone -------- MODEM_S5360DDLA1_REV05.tar.md5
CSC ---------- GT-S5360-MULTI-CSC-ODDLA1.tar.md5
then press start button.
I am not resposible for any damage or any other things to your devise, lot of people and me also try this method, there is no proble to me.
Click to expand...
Click to collapse
Thanks friend. I am going to try out this. Could you please tell me:
1. About the Android Version for that link's ROM.
2. Is that Version able Bengali Language Support?
3. If electricity is gone during flashing time then any problem for Phone?
4. How many times need to finish the Flashing?
Friend I am waiting for your great response. Thanks again.
Lol, i pressed thanks instead of quote, Nevermind
1. About the Android Version for that link's ROM.
2.3.6
2. Is that Version able Bengali Language Support?
Its Indian ROM, didn't test for bengali language though.
3. If electricity is gone during flashing time then any problem for Phone?
Maybe you will have to flash the rom again
4. How many times need to finish the Flashing?
40 seconds to 1 min.
Aashik said:
Lol, i pressed thanks instead of quote, Nevermind
1. About the Android Version for that link's ROM.
2.3.6
2. Is that Version able Bengali Language Support?
Its Indian ROM, didn't test for bengali language though.
3. If electricity is gone during flashing time then any problem for Phone?
Maybe you will have to flash the rom again
4. How many times need to finish the Flashing?
40 seconds to 1 min.
Click to expand...
Click to collapse
Thanks friend. I have sucesfully flashed my phone.
But still i am facing problem. When i pressed (Volume Down+ Power+Home) buttons to go to recovery mode then still show this message:
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
Now i can't root the device. I want to root my device but can't access the recovery area (Volume Down+ Power+Home)
Please any solutions for this problem?
alaminip said:
Thanks friend. I have sucesfully flashed my phone.
But still i am facing problem. When i pressed (Volume Down+ Power+Home) buttons to go to recovery mode then still show this message:
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
Now i can't root the device. I want to root my device but can't access the recovery area (Volume Down+ Power+Home)
Please any solutions for this problem?
Click to expand...
Click to collapse
Volume Down + Power + Home ---- for Download Mode.
Volume UP + Power + Home ---- for Recovery Mode.
If you want root your mobile, you can go to recovery mode (Volume UP + Power + Home)
then select "update.zip" file from sd card, after then restart your mobile.
If you need updated.zip file, download form this link
http://forum.xda-developers.com/showthread.php?t=1378660
krishna_nirvana said:
Volume Down + Power + Home ---- for Download Mode.
Volume UP + Power + Home ---- for Recovery Mode.
If you want root your mobile, you can go to recovery mode (Volume UP + Power + Home)
then select "update.zip" file from sd card, after then restart your mobile.
If you need updated.zip file, download form this link
http://forum.xda-developers.com/showthread.php?t=1378660
Click to expand...
Click to collapse
Thanks Friend. I got that. That was my mistake.
Unable to recognise my usb port
Hi Friend,
Am also facing the same situation am also try to flash my samsung galaxy y i have downloaded all the files from the below given link, but when am try to connect my phone to pc its not recognising my phone i have updated my usb drivers in pc and i have tried the same process by connecting my phone to other pc/laptop too but its not recognosing.
Please let me know what can i do???
Thanks in Advance.
murali5115 said:
Hi Friend,
Am also facing the same situation am also try to flash my samsung galaxy y i have downloaded all the files from the below given link, but when am try to connect my phone to pc its not recognising my phone i have updated my usb drivers in pc and i have tried the same process by connecting my phone to other pc/laptop too but its not recognosing.
Please let me know what can i do???
Thanks in Advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?5kcxc1yovvl6740 try this driver
and i suggest you to use package according to your region. to avoid any csc related problem or data connection issue
visit our development thread and find dokys post
Hi Friend,
I have installed the drivers from the mediafire link. After that when am trying to connect my device its ot detecting saying "unknown device" in device manager.
what i have to to now..??
is there any thing that i have to do special for my device.
i flashed cwm nd flashed 2 3 roms now unable to reach recovery help p[lease..........:crying::crying::crying::crying::crying::crying::crying::crying:
vishuhtc said:
i flashed cwm nd flashed 2 3 roms now unable to reach recovery help p[lease..........:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
are you able to access download mode??? If yes then get a odin package for your device and flash it.
amit34521 said:
are you able to access download mode??? If yes then get a odin package for your device and flash it.
Click to expand...
Click to collapse
how to access download mode
maybe the battery is low..charge it full...then you can enter recovery
sasuke150 said:
maybe the battery is low..charge it full...then you can enter recovery
Click to expand...
Click to collapse
battery is more than 80 n% now when i am trying to charge also only samsung screen shows up
it's bootlop, you just flash stock rom via odin....
see the sticky post in development to do that !
vishuhtc said:
battery is more than 80 n% now when i am trying to charge also only samsung screen shows up
Click to expand...
Click to collapse
VillaVor said:
it's bootlop, you just flash stock rom via odin....
see the sticky post in development to do that !
Click to expand...
Click to collapse
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
vishuhtc said:
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
Click to expand...
Click to collapse
No need to cry,. Even i have faced that..
First find out a stock Rom using odin mode then
Switch off your mobile
Then press Menu+Vol Down+Power button.. Now odin mode ll start
Now connect ur mobile to pc thru usb cable
Now open odin Sw, the system ll automatially detects ur device(follow the software installation process)
Then use the downloaded stock Rom to flash ur mobile.
It may take only 5 to 10 minutes for installation..hope it ll works for u.
Sorry for my English if u feel hard to understand
Sent from my GT-S5360 using xda app-developers app
Dont use skin1980 or cwm bla bla
For flashing
Use CWM-Madteam-Galaxy-Y for better.
Sent from my GT-S5360 using xda premium
Unplug charger, press Home + Vol Down + Power Button together
Hit Thanks If I Helped You
vishuhtc said:
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
Click to expand...
Click to collapse
- download the required firmware bundle ( download ur needed firmware bundle in this link [Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages )
- install Kies, or Samsung driver pack
- unzip the package, You'll get 3 *.tar (or tar.md5) files
- download Odin3 1.84 or 1.85 (click here)
- stop Kies
- stop all active ADB sessions
- start odin
- do backup of your data and apps
- charge your SGY at least 75%
- remove SGY from USB or charger
- start the device in Download mode
*HERES HOW TO GO TO DOWNLOAD MODE*
-power off Your SGY
- wait 30 sec
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
*NOW IN ODIN PC(
- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
SOURCE:[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Download this stock Rom(2.3.6 DXKJ3)..and flash through Odin and go to download mode by pressing simultaneously Vol. down+power+home
Hit thanx if u like my work
74M3NUMB3RS said:
- download the required firmware bundle ( download ur needed firmware bundle in this link [Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages )
- install Kies, or Samsung driver pack
- unzip the package, You'll get 3 *.tar (or tar.md5) files
- download Odin3 1.84 or 1.85 (click here)
- stop Kies
- stop all active ADB sessions
- start odin
- do backup of your data and apps
- charge your SGY at least 75%
- remove SGY from USB or charger
- start the device in Download mode
*HERES HOW TO GO TO DOWNLOAD MODE*
-power off Your SGY
- wait 30 sec
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
*NOW IN ODIN PC(
- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
SOURCE:[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Click to expand...
Click to collapse
i tried odin mode but when my device is connected it says device cannot start error message
one of the devices connected is malfunctioned is the error message i am constantly getting
never mind i successfully installed stock firmware thankyou all for your help
vishuhtc said:
i tried odin mode but when my device is connected it says device cannot start error message
one of the devices connected is malfunctioned is the error message i am constantly getting
never mind i successfully installed stock firmware thankyou all for your help
Click to expand...
Click to collapse
please tell me how could you solve this problem and flash stock rom without using odin? i'm unable to access recovery mode and my device is not readable on pc even with drivers installed
If your device is not recognised try to install drivers again if its still their it might be hard brick
So you need jig cable or go to service center in india they will charge 170 rupee
i am so perfect at sleeping i can do it with my eyes closed
sent from -
xeonzlot.blogspot.com
I too faced the same.problem ...
where I was not able to go to recovery....
and my phone was also not detected in pc...It was fixed with these silly steps...
I did this:
Frst I uninstalled the Samsung drivers...
restarted the pc...
Installed the drifers...
then I used another USB cable and connected to the USB slot behind one of my pc...
then went to download mode and the phone was detected and also successfully flashed stock Rom.....
Hope this works for you too...
I've encountered the following problem with my Galaxy Note 4: I just bought it online from a guy who turned out to be a fraud and I was not able to find or contact him again via the internet market place. So that was really stupid of me...and expensive...and I regret it very much and with hind site I should have picked up the signs but...o well you got the picture...I got ripped.
Anyways after careful inspection it turned out to be a real genuine Note 4 N910F with 64 Gb but with a korean or chinese or something recovery mode (I saw it once when I got home), an imei not to be found on any stolen phone list and working correctly with an european rom that includes English and Dutch at that point.
That's when I decided to factory reset it and then I got into trouble again: For some reason it got stuck in a boot loop with just a No Command message. Normally you can reach the recovery mode by pressing Volume Up +Home +Power but now nothing happens. It's not a real brick but with just the No Command message and no access to the recovery mode I don't know how to fix this.
Can anyone help me with a clue on how to get out of a No Command loop without recovery mode? Or how to get into recovery mode if start with Key Up etc does not work? Or any other clue that could help me?
Thanks in advance!
Kind regards,
Rene (aka the guy who got ripped off but hopes to save the phone)
Can you get into download mode?
Thanks dr.mOx for responding!
I tried both volume up+home+power to get into recovery mode and also volume down+home+power to get into download mode but in both cases the device starts and shows me the android robot on it's back with a red warning triangle containing an exclamation mark and below the robot the message "No command." . The screen blinks every two or three seconds. The power button is not shutting the phone down in this state. I have to remove the battery to retry.
Battey out. Then in. Go to download mode. Flash stock rom with odin
Sent from my SM-N910F using XDA Premium 4 mobile app
Hi Ozzyblack. The thing is that, if I'm correct, when I press volume down+home+power to get into download mode I expect some sort of menu to appear asking to go into download mode or not. Am I correct? I saw same sceendump about that. And now I keep getting the No Command window. Do you think I miss something here? I do press volume down first, then home (keeping volume down pressed), and them the power button (keeping all buttons pressed). After a few seconds the display turns a bit more grey for a sec and then the android robot appears. But no message of sorts about getting into download mode.
Hi reborn67.
**Only if you have a galaxy note 4 N910F model**
If you can get into download mode your safe, and you can reflash an offical ROM, there is no menu system in Download mode so don't worry.
Don't stay in download mode forever or a long time, i.e. power off and wait till you have the ROM and Odin before you go into download mode as it sometimes times out even though it still shows in download mode.
Go to here http://samsung-updates.com/details/37086/Galaxy_Note_4_Snapdragon/SM-N910F/DBT/N910FXXU1ANK4.html download the ROM, and then download Odin here https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek
These are the instructions from sammobile on how to flash ROm with Odin.Instructions
1-Extract (unzip) the firmware file
2-Download Odin v3.09
3-Extract Odin zip-file
4-Open Odin v3.09 (make sure the extracted rom file "N910FXXU1ANK4_N910FOXA1ANK4_N910FXXU1ANK4_HOME.tar.md5" is in the same folder as Odin before opening up Odin.
5-Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6-Connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM)
7-Add the firmware file to AP / PDA
IMPORTANT** Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
I always do a hard reset after flashing new ROM's (settings, backup and reset, factory data reset)
I have a network locked UK N910F on EE and use this German ROM with no problems, this ROM has little bloatware.
Thanks gadjet. I do have odin and a stock rom ready for use now:
1-I tested odin and the usb port plus driver setup with my 'old' galaxy s4 and within a second the ID:Com in Odin turns blue. So that seems to be working fine.
2-So now I put in the Note 4 battery and connect to usb WITHOUT ANY KEYS PRESSED...just to test! And the usb connection bleeps from windows confirm a device is connected...so far so good.
3-Last and most important step fails: Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons), the 'no command' robot is still there, and also connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM) never happens. And also there are no windows usb connection bleeps so apparently there's a difference when I tried to select download mode.
Please know that I'm really thankful for all the great tips. But I guess I'm still missing something here.
Kind regards,
Rene
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
gadjet said:
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
Click to expand...
Click to collapse
Tried it. I do not get a menu. Just the No command robot.
reborn67 said:
Tried it. I do not get a menu. Just the No command robot.
Click to expand...
Click to collapse
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
gadjet said:
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
Click to expand...
Click to collapse
Unfortunately Kies 3 (latest update) does not recognize any connected device when I try this. The No command screen is laughing at us again
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
gadjet said:
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
Click to expand...
Click to collapse
There's no vibration...just the No command window.
OK, corrupt boat-loader Samsung service centre repair job, or local phone repair job.
Requires boot chip to be reflashed at board level.
Sorry we couldn't get you going bud..:crying:
Thanks for trying guys!
I'll see if I can find a local phone repair store.
I used to have the same problem with my SM-P605 when I flashed some ROM in the summer, the only special thing I did was not giving up and after all I got to the Download mode. Hope it'll work for you without Service.
Good Luck
Today I went to visit an official Samsung store. They told me I bought a very good but fake Note 4 and it is not likely it can be recovered. The weight is incorrect...a bit to heavy. Also the serial numbers are unknown in the samsung database and some other details were not correct. Thanks again for trying to help me! I now officially have a really expensive brick that looks like a note 4.:crying:
same issue i am facing..i tried all..but it shows no command error and no menu shows up
ill be going to get my phone checked today..if i get any way out ill let u know
What you did later to recover ? I'm facing the same problem I've visited samsung service centre but they are unable to solve it.
Can you guys help me for my phone Samsung note 4 because its just keep repeating in a logo SAMSUNG...
I tried pressing volume down+home button+power then got "WARNING CUSTOM OS... and stuff and then I press volume high+home button+power then I got the logo SAMSUNG that keeps on repeating. Please help me what to do
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo
. I've tried steps like flashing stock rom, odin fails. (I feel like because of the reset my OEM got locked again)
I've tried smartswitch/kies, software downloaded but the phone automatically restarts when the software starts installing. It doesn't even detect my S8
I'm stuck at the bootlogo where it says Galaxy S8, I can't access recovery mode and also I checked on download mode, it says my OEM is LOCKED. I'm using the Samsung Galaxy S8 G950FD.
please please help.
it happened for me with s6 edge forget to unlock oem and flash custom recovery but solve it by kies only
u need to install last Samsung drivers and last kies put ur device on download mode and put ur model on kies manually and let kies take the lead
it will work
Cyxtielle said:
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo
. I've tried steps like flashing stock rom, odin fails. (I feel like because of the reset my OEM got locked again)
I've tried smartswitch/kies, software downloaded but the phone automatically restarts when the software starts installing. It doesn't even detect my S8
I'm stuck at the bootlogo where it says Galaxy S8, I can't access recovery mode and also I checked on download mode, it says my OEM is LOCKED. I'm using the Samsung Galaxy S8 G950FD.
please please help.
Click to expand...
Click to collapse
Try this !
Prepare ODIN with the files CL + BL.
This worked for me this wait, my phone was like yours...
I Cannot turn phone off too.
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
Okay this one worked. It flashed. Great. But now IT STILL DOESNT BOOT. I'm stuck at NO COMMAND, it keeps restarting after 2 second of showing no command. and it's looping all over.
Note: I've tried reflashing the ROM again. It now fails, and the trick doesnt work, I've tried booting to recovery mode when its on NO command screen. It just restarts. Doesnt boot.
Having a hard time getting into download mode also. Sometimes it does, sometimes it doesnt. It just keep restarting.
Cyxtielle said:
Okay this one worked. It flashed. Great. But now IT STILL DOESNT BOOT. I'm stuck at NO COMMAND, it keeps restarting after 2 second of showing no command. and it's looping all over.
Note: I've tried reflashing the ROM again. It now fails, and the trick doesnt work, I've tried booting to recovery mode when its on NO command screen. It just restarts. Doesnt boot.
Having a hard time getting into download mode also. Sometimes it does, sometimes it doesnt. It just keep restarting.
Click to expand...
Click to collapse
Can you post a photo ?
---------- Post added at 07:39 PM ---------- Previous post was at 07:22 PM ----------
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
TWRP: TWRP 3.1.1
* Exclude all with red and try the rest.
Same happening with my S8? Can anyone help? Cannot boot into recovery......Device stuck at S8 logo..........Cannot turn off device........Firmware flash fails through odin.
All problems happening at the same time
Try this:
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
Thanks for your precious reply and sorry for not updating my previous reply.
Its done. Installed TWRP successfully!!!!!
Anyways thanks for your help!!!!!!!
I guess I have to join the club. I tried to flash the new Oreo beta and surprisingly I succeeded but I made a mistake of playing around with it's arrow pattern settings designed for older people. End result, couldn't remember what sort of combination of arrows I chose. It surprised me that I couldn't use my fingerprint to get out of the arrows, it's basically a pin or a pattern so I should be able to skip it with a fingerprint.
I've been trying two days now, got beyond the arrows problem. Initially I had the original recovery but in my great wisdom replaced it with TWRP so bye bye warranty, but I trusted I could handle it so that I could get back to Oreo but no such luck. Every time I manage to boot it says my data is corrupted and I can't use it. Tried flashing all kinds of Oreos and not Oreos but no luck so far. I even tried a trick #47 to format the data folder and then reflash it with the same stuff. No luck, I've restored backups and made new ones and I suppose it's time to say I don't know what to do. I got a bunch of APKs but I can't get far enough to use them.
My next operation is got back to nougat, but somehow I doubt it will get me through this so any ideas? If there was a way to make the phone like it was when I bought it - then I could make my mistakes all over again, I'm too stubborn to learn anything ever, besides, I'm almost forty and you can't teach old dog new tricks.
I don't have official access to Oreo, just tried flashing whatever I could find on xda mostly. Any and every idea is appreciated. has anyone invented a time machine yet?
~
Try this:
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
---------
Hey there sender, thank you for posting this as it did seem to help me a lot. I was having troubles getting to that menu and it seemed to be how you say it "bricked" as well in no clue how to resolve that. I had searched up almost two hours with no luck and doing other several other options in gaining to resolve it, nothing helped.
Looking at this guide this was something that seemed to only help and thought it was worth a shot after doing over several.. thinking in finally giving up and going ahead with a new device, but my luck.. it worked!
Again thanks for the guide, hope you well and to this community.
Thanks a lot
My phone is working now
Thank you so much!!!
Same problem, but odin stuck and it says "set partition" in the box on the right top..
thanks in advance
AngelOfBlood said:
Try this:
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
Click to expand...
Click to collapse
Hi I am having this same issue. I tried what you wrote about but I am a little confused. When you say prepare Odin with CL and BL files, what is the CL file? I only have an AP, BL, CP and CSC file but no CL file. Also when you say "Press faster" what does that mean? Not sure when and what to press faster.
samsung S8, Screen totally blacked out. wont enter any moods, no lights.. just nothingness. What recovery program can I use, I just wanna get some notes off in samsung notes app. Please help
I'm unable to go to download mode.
My Phone starts and gets stuck in GALAXY S8+ Logo screen.
Pressing any key combination is not helping. Only VOL DOWN + POWER switches off the phone.
Help Me...!!!
Tengo el mismo problema
Hi all! I have the same problem with mo s8 plus, when I try to flash the stock with odin, it does not start and I do not command. 5 seconds and the samgung logo and again No command. It does not let me enter into recovery mode either, I can only enter download mode! I do not know what to do! I clarify that before flash the stock rom, I made wipe data and erase everything by twrp. But still I do not return stock Any advice?
Im having a very similar responce from my device. Have u tried plugging it in, your computer is best cause u hear the sound connect and disconnect. Holding power, bixby, and both volume buttons. You will hear ur computer chime when u plug it in, keep holding all of these buttons u will hear it disconnect, do not let off these buttons, you will hear it chime again, 2 secs later u will be at this screen, and am currently stuck in between 9008 and this screen with no download mode and no recovery... Help me! Please anybody! Help
Rajnikant121 said:
I'm unable to go to download mode.
My Phone starts and gets stuck in GALAXY S8+ Logo screen.
Pressing any key combination is not helping. Only VOL DOWN + POWER switches off the phone.
Help Me...!!!
Click to expand...
Click to collapse
AngelOfBlood said:
Try this !
Prepare ODIN with the files [Couldn't put due to just making an account.]
This worked for me this wait, my phone was like yours...
I Cannot turn phone off too.
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
Click to expand...
Click to collapse
Is it possible you still have those files? I know it's been so long, but my phone is stuck in download mode or does nothing at the update screen.. If it helps, I totally forgot to turn on USB debugging before the last time my device saw life.
Hey guys.
Can you help me?
My S8 suddenly died and i made a lot of procedures to flash The stock rom.
Now, it stucks on boot loader screen (Samsung s8 powered by Android screen). Sometimes it tries to go to Blue screen and install something but stucks too... Never pass from this screen...
What Can i do to solve this problem?
Thanks!
I just tried flashing my Phone and now i think its bricked, ill explain
So I used this website https://www.naldotech.com/install-twrp-7-0-nougat-samsung-galaxy-s6-s6-edge/ to try and flash my galaxy s6 edge +, i downloaded the twrp file and odin, then i went to this thread https://forum.xda-developers.com/galaxy-s6/help/help-installing-twrp-sm-g920f-7-0-t3610005 and did these steps "1. Download TWRP: https://eu.dl.twrp.me/zeroflte/
2. Start Odin as Admin
3. Boot Device into Download Mode
4. Connect your S6 to PC (Odin should show "Com 1" for example)
5. Click on "AP" and then choose twrp
6. Deactivate Auto reboot in odin
7. Flash it
8. When its done, hold Volume Down + power
9. Directly after screen goes black, make volume up + homebutton + Power
10. Now it should be flashed "
and on odin it said this
in a big blue box it said "reset" and i didnt know what it meant so i held power and volume down then volume up, home and power and this is where my problem is. it keeps turning on randomly and showing the logo then turning off and when i try and turn it on it also does it. i just checked odin again and now instead of saying reset it says pass with a green box
Oh guys i just got into stock recovery i think im saved please help me what do i do now?
never mind people i got twrp on there i flashed an older version and now twrps working, time to get magisk
In the future just find your tutorials on here and go through the steps slowly and carefully