I tried to root my Magic however it has perfected SPL 1.76.2008 so I tried the goldcard method but I only managed to change the firmware from 1.6 to 1.5. I cannot use fastboot so now I'm trying to install a new RUU so that I can follow the steps to install CM however I get the USB error (on windows 7).
I already tried reinstalling the latest HTC Sync and that seems to recognise my phone but when I open the Setup for RUU, Sync doesnt recognise it anymore until I close setup and replug USB. And yes, I inserted the goldcard already. Any help is appreciated.
I have pretty much the same problem here, but I do not have a goldcard (which I dont thing its necessary). When I try to transfer some file to my phone, it starts and after a couple of seconds, unplug from storage mode (Robot turns green again :[ ).
I have Cyanogenmod 6.1.0-DS and Windows 7 32bit.
Even over wifi, this happens. Seems to me thats some storage problem with the rom, but cyanogenmod is widely used and tested.
Can someone help us?
Debugging on?
Of course, I followed every single step correctly maybe theres a problem with windows 7.
BMN12 said:
Of course, I followed every single step correctly maybe theres a problem with windows 7.
Click to expand...
Click to collapse
On linux now and had forgotten this. Reread everything from the beginning and recalled that I've had issues with the drivers from HTC Sync driver not working when I had downgraded my G1.
The "official" google sdk driver covers all builds and modes (RUU uses adb mode.) Maybe try reinstalling with them instead?
Kind Regards,
Kevin
Sent from my T-Mobile myTouch 3G using XDA App
Related
in reference to: http://forum.xda-developers.com/showthread.php?t=513162 - that seems to be now locked (dont think i did anything wrong :S)
i still cant get my phone to flash. i ran blac_uspl.exe yesterday - phone booted to USPL fine. i then proceeded to flash a HTC firmware.
anyway, seems the htc rom isnt quite fully functional and i've lost the ability to connect to GPS hardware.
so now im trying to get back into the USPL.
every time i run black_uspl.exe i get the following error
Opening USB port \\?\usb#vid_0bb4&pid_00ce#5&1b029610&0&1#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}...
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&1b029610&0&1#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835} parameters could not be set
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&1b029610&0&1#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835} timeouts could not be set
ERROR: No response from device
im using the same laptop as i did first time around, so usb drivers should be fine!
can anyone help me more?
Did you disable 'Allow USB Connection' in Activesync connection settings?
Follow cRaCKwHoRe's guide (see signature) on flashing roms etc using USPL
found the problem, and i followed both your advices - disable USB and the flashing guide (did it over and over and over again on different USB ports)
anyway - the problem?
windows 7 RC!
it allowed me to flash 1 time. when i went back to re-flash phone, it denied. i havent a clue why and re-traced my steps to the 1st sucessful flash. it just refused to work. this was on the exact same laptop. only thing that changed was possibly entering hibernation and/or a shutdown of the laptop.
i tried it on a winXP machine and it worked perfectly.
so it seems XP is still the only properly stable OS for flashing stuff.
so, problem fixed and im on a fully functional HD again
Vista works fine for flashing too btw.
win 7 rc
Am I right in thinking that its not possible to flash using Windows 7 ?
Hi guys!
I have a weird USB problem on my Vodafone HTC Magic. I can't use it as a mass storage device when I connect it to my laptop. When I connect it to a windows machine, it just give some error saying that the installation of the device has failed and nothing from there.
While connecting it to a Linux machine, nothing happens, nothing is mounted, and no new device is created. Also, lots of errors shows up on syslog...
I can not also use the adb tool to communicate with the phone, since it doesn't find the phone...
I though it could be an hardware problem, but the weirdest thing is that I can access the phone using the fastboot method with no problem, I have already changed the bootsplash image using the fastboot to check if it was really working, so, I guess its not na hardware problem.
The phone had the 1.33.0007 original SPL, now is with the eng 1.33.2005 SPL and running the latest CyanogenMod. I have tried tons of roms, but the problem persists in every rom I tried...
Does any one has a problem like this one?
Is there anything I can flash to put the phone completely stock, just as it came of the factory? I now that the roms that we flash, usually are missing some things, like the Radio and some other stuffs... Maybe those some other stuffs are some what "crazy" and need to me flashed again.
Note: I can not get the phone to warranty since I have no the receipt of buying the phone...
I will appreciate any answer
Did you install SDK and install the appropriate USB drivers? Sounds like that could be your problem.
Yeah, I did installed the sdk...
Also, I tried a friends HTC Magic on my linux machine with the same cable, and it worked ok...
Finally I found some guys with the same problem as me, although its on HTC Hero, the problem is very similar. Michael S on Modaco already solved is problem by running some weird, hidden and undocumented commands of fastboot.
http://android.modaco.com/content-page/299174/no-adb-no-sd/page/80/
Will give some more time to run those commands on mine and see what happens.
I can't use HTC sync between my pc and my legend, i can't transfer any files between them either, the only thing i can do when i connect it to my PC, is to recharge it..
My PC says that it cannot install any drivers, and i have tried to install them manually, but without any luck.
What should i do ?
buusing said:
I can't use HTC sync between my pc and my legend, i can't transfer any files between them either, the only thing i can do when i connect it to my PC, is to recharge it..
My PC says that it cannot install any drivers, and i have tried to install them manually, but without any luck.
What should i do ?
Click to expand...
Click to collapse
What OS and version are you using for starters (i.e. Windows XP, Vista, 7 etc)
And not last, what ROM do you have? Stock HTC or a cooked one?
buusing said:
I can't use HTC sync between my pc and my legend, i can't transfer any files between them either, the only thing i can do when i connect it to my PC, is to recharge it..
My PC says that it cannot install any drivers, and i have tried to install them manually, but without any luck.
What should i do ?
Click to expand...
Click to collapse
I suddenly had a problem where my Legend would charge over USB but there was no indication on the phone that sync was available.
I tried a bunch of different roms. Even going so far as to revert to a stock ROM.
Nothing worked. I ended up putting it in as a warranty return for repair.
One strange thing was it would still connect in Fastboot and recovery, give that a try. If so, you have the same strange problem I had.
E.E.
I have tried on both win XP and Win 7, i have unrooted my legend to ver. 1.31
eepunk said:
I suddenly had a problem where my Legend would charge over USB but there was no indication on the phone that sync was available.
I tried a bunch of different roms. Even going so far as to revert to a stock ROM.
Nothing worked. I ended up putting it in as a warranty return for repair.
One strange thing was it would still connect in Fastboot and recovery, give that a try. If so, you have the same strange problem I had.
E.E.
Click to expand...
Click to collapse
I think that i may have the same problem as you, though i can charge it through the computer. But i can't access my SD card and i can't use HTC sync
HTC Sync is a dog
hi there,
before i flashed my new htc magic i had normal usb connection. adb and fastboot worked fine.
but now i have flashed the new hboot (Engineering SPL 1.33.2004) and a new rom (BeatMod AOSP 2.2.1). when i connect my phone the power led turns on but no usb connection! in the device manager error code (43) UNKNOWN DEVICE. searched the forum and dr.google but till now no anwer found.
i tried to flash back to factory default rom, with NHB method, still no usb connection...
so pls, is there something i missed till flashing or is just my usb port crasched?
beside, FASTBOOT works fine!
thx in advance.
Lg phoenix20815
Have you tried reinstalling HTC Sync along with the drivers?
keinengel said:
Have you tried reinstalling HTC Sync along with the drivers?
Click to expand...
Click to collapse
yep, no chance that my device is recognized. downloaded the x86 and x64 drivers for android. but the UNKNOWN DEVICE dont let me install it.... im really
Last time I had that problem I had to uninstall everything android-related, use USBDeview to remove all android devices and start from scratch.
You say you flashed the official nbh and it still doesn't work? Did the flashing work fine?
keinengel said:
Last time I had that problem I had to uninstall everything android-related, use USBDeview to remove all android devices and start from scratch.
You say you flashed the official nbh and it still doesn't work? Did the flashing work fine?
Click to expand...
Click to collapse
thx for the tipp, used the USBDEview to remove the drivers, but it didnt worked.
the solution was to flash new Hboot and Rom! strange, but i think the other rom was broken?!
ng
Glad you got it working, sorry I couldn't help
I have been flashing my HTC HD2 EU model without issue for weeks now, i have had many different versions of android on and had no problems carrying out all the steps, but after reinstalling windows i am unable to get the MAGLDR drivers to install it appears as an "other device" in device manager with error code 28 (no driver installed)
I have HSPL 2.08 installed. and radio 2.15.50.14
Heres what i have tried:
-install/remove HTC Sync
-install Windows Mobile Device Centre
-installed Android SDK and google driver revision 4
I have booted into bootloader and attempted to reinstall the radio AND HSPL, but the bootloader also shows as an "other device" and it does not show "usb" on the screen, so when i run "romupdateutility" i get connection error 260..
i am fresh out of ideas i have spent nearly a week and half googling the problem is as many ways as possible and nothing even remotely helpful has come up, if i boot into CWM i can mount the SD card and i can install (some) ROMS, but only ones that use the same partition layout i am currently using and i cant use any others because i cannot flash the partition layout.
Theres not an issue with the phone because i have a computer at work and it all works fine there, just wont work on my home laptop
any ideas?
*update* i have read a few people with a similar (not exactly the same) issue are he owners of bricked HD2's my device DOES work it works fine but just wont install this bloody driver so i can never flash another ROM and i dont know why. 36 views and NOONE has an answer?
in WMDC make sure 'allow usb connections' is unticked.
Thanks for that mate your a lifesaver that got it to install the device driver for MAGLDR, but i still couldnt get the bugger to flash via USB, strangely killing ADB in task manager solved this and i am not able to flash. Problem solved!
Has anyone found the resolution? I am also facing the same problem and because of this, I even cannot use Android Debugging.
Any help?