Database Users

Unable to use USB - unless in fastboot

Hi guys!
I have a weird USB problem on my Vodafone HTC Magic. I can't use it as a mass storage device when I connect it to my laptop. When I connect it to a windows machine, it just give some error saying that the installation of the device has failed and nothing from there.
While connecting it to a Linux machine, nothing happens, nothing is mounted, and no new device is created. Also, lots of errors shows up on syslog...
I can not also use the adb tool to communicate with the phone, since it doesn't find the phone...
I though it could be an hardware problem, but the weirdest thing is that I can access the phone using the fastboot method with no problem, I have already changed the bootsplash image using the fastboot to check if it was really working, so, I guess its not na hardware problem.
The phone had the 1.33.0007 original SPL, now is with the eng 1.33.2005 SPL and running the latest CyanogenMod. I have tried tons of roms, but the problem persists in every rom I tried...
Does any one has a problem like this one?
Is there anything I can flash to put the phone completely stock, just as it came of the factory? I now that the roms that we flash, usually are missing some things, like the Radio and some other stuffs... Maybe those some other stuffs are some what "crazy" and need to me flashed again.
Note: I can not get the phone to warranty since I have no the receipt of buying the phone...
I will appreciate any answer

Did you install SDK and install the appropriate USB drivers? Sounds like that could be your problem.

Yeah, I did installed the sdk...
Also, I tried a friends HTC Magic on my linux machine with the same cable, and it worked ok...

Finally I found some guys with the same problem as me, although its on HTC Hero, the problem is very similar. Michael S on Modaco already solved is problem by running some weird, hidden and undocumented commands of fastboot.
http://android.modaco.com/content-page/299174/no-adb-no-sd/page/80/
Will give some more time to run those commands on mine and see what happens.

[170] USB Connection Error

I tried to root my Magic however it has perfected SPL 1.76.2008 so I tried the goldcard method but I only managed to change the firmware from 1.6 to 1.5. I cannot use fastboot so now I'm trying to install a new RUU so that I can follow the steps to install CM however I get the USB error (on windows 7).
I already tried reinstalling the latest HTC Sync and that seems to recognise my phone but when I open the Setup for RUU, Sync doesnt recognise it anymore until I close setup and replug USB. And yes, I inserted the goldcard already. Any help is appreciated.

I have pretty much the same problem here, but I do not have a goldcard (which I dont thing its necessary). When I try to transfer some file to my phone, it starts and after a couple of seconds, unplug from storage mode (Robot turns green again :[ ).
I have Cyanogenmod 6.1.0-DS and Windows 7 32bit.
Even over wifi, this happens. Seems to me thats some storage problem with the rom, but cyanogenmod is widely used and tested.
Can someone help us?

Debugging on?

Of course, I followed every single step correctly maybe theres a problem with windows 7.

BMN12 said:
Of course, I followed every single step correctly maybe theres a problem with windows 7.
Click to expand...
Click to collapse
On linux now and had forgotten this. Reread everything from the beginning and recalled that I've had issues with the drivers from HTC Sync driver not working when I had downgraded my G1.
The "official" google sdk driver covers all builds and modes (RUU uses adb mode.) Maybe try reinstalling with them instead?
Kind Regards,
Kevin
Sent from my T-Mobile myTouch 3G using XDA App

Bootloader not detected at PC

Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help

install windows mobile device center to your pc.otherwise it doesn't recognize it.

I have installed WMDC. But it doesn't recognize it at all.

but cwm isnt flashed from bootloader? r u using magldr or clk?

MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing

try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)

after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see

[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks

Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable

After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?

Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App

Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.

Help me please to fix my phone

My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.

i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck

A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not

So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???

Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )

Thanks, but yes it involves the bootloader

Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?

yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro

A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)

Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?

yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want

A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device

take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7

[Q] Need help - HD2

So, i have been looking for solution to my problem.
I have HD2 and wp7 on it. Yesterday i wanted to change it to android. So i uninstalled wp7 and downloaded one rom from xda. Everything went well, until it reported a problem. There wasn't usb connection. I tryed to install it a few times, but everytime the same problem.
Then i tried to install wp7 and wp6.5 and android. ROM's i downloaded from here. Everytime it report usb connection problem.
Now i cant to anything, and i cant install any rom, i cant install any radios, hspl etc. .. What i should do now, that i get it to work? Please, i need my phone. And sorry for my bad english, ask if you dont understand something
I've tried everything, i just run HD2 toolkit (task 29) but it also says that there are connection problem.
So i think the most serious problem is, that i have usb connection problems, how i can fix that?

Have you tried all your USB ports, or have you tried another USB cable.?

You could try installing WMDC or Activesync to PC just in case it a PC driver issue !

Yes i have tried all ports and 2 cables. I will try now active-sync.

Kritsi said:
You could try installing WMDC or Activesync to PC just in case it a PC driver issue !
Click to expand...
Click to collapse
Well, i'm using Windows 7, so i have to install WMDC? Thanks
Hmm, i think the problem is in phone, because yesterday, before i uninstalled wp7 the usb connection worked. Then i uninstalled wp7 and i installed also something new to phone (radio or something?).
So, is there any way to uninstall the broken 'file', or way to install new one, without usb-connection

mutru said:
Well, i'm using Windows 7, so i have to install WMDC? Thanks
Hmm, i think the problem is in phone, because yesterday, before i uninstalled wp7 the usb connection worked. Then i uninstalled wp7 and i installed also something new to phone (radio or something?).
So, is there any way to uninstall the broken 'file', or way to install new one, without usb-connection
Click to expand...
Click to collapse
No it is not because you flashed a different radio. The radio is software that is used for your data connection, cellular connection, blutooth, WiFi, and camera. Plus if the radio was "broken" your HD2 would be hard bricked. If you used your computer to install a radio recently then that means that either your drivers have gotten screwed up or your USB cable is damaged and can not be used to transfer data anymore.

I used my computer to install the radio, and i have tried to delete drivers. And if I remember correctly, the radio installation went stuck, but the whole radio-system was ok, because i used it when i had wp7. Can i install new radio from sd-card or something? Please everyone help me !
Edit: I forgot to tell that i can go to bootloader, and it shows me the USB mode. Will this help any?
I really hope that there are some way to solve the problem :s

Try another PC/Notebook & try re-installing WMDC ...
You could also look at flashing a radio & WM6.5 via SD card method ...

Thanks to everyone. I solve the problem.
I tried another computer and it works.. Yesterday i tried it also but it didnt work
Technology is amazing Love my HD2 <3