Related
on switching on, it just vibrates, comes up "HTC" (no info at bottom left) and nothing more.
I installed MAGLDR 1.1
I think HSPL *may* have been an older version- 1.42 only noticed that as I was flashing. Didnt realise the newer version was essential. Is it?
Put your phone in bootloader mode(pull battery, insert battery, volume down+power on) and flash the LATEST stock ROM.
This should keep HardSPL but remove MAGLDR.
After flashing the stock ROM, update to latest HardSPL.
Reinstall MAGLDR V1.11 from thread.
Try to install Android again.
___________________________________
Thread moved to Q&A since this is question, not a discussion.
try this completely turn the phone off..not press the end and volume down key together till u see the 4 color bars...then flash it with the original windows 6.5 rom. good luck
adamvanner said:
on switching on, it just vibrates, comes up "HTC" (no info at bottom left) and nothing more.
I installed MAGLDR 1.1
I think HSPL *may* have been an older version- 1.42 only noticed that as I was flashing. Didnt realise the newer version was essential. Is it?
Click to expand...
Click to collapse
Please read this post, i did and it worked just fine for me:
http://forum.xda-developers.com/showthread.php?t=893948
If you follow the instructions EXACTLY, you will get it done.
And, BTW your phone is /still/ not Bricked!
lms1407 said:
Please read this post, i did and it worked just fine for me:
http://forum.xda-developers.com/showthread.php?t=893948
If you follow the instructions EXACTLY, you will get it done.
And, BTW your phone is /still/ not Bricked!
Click to expand...
Click to collapse
Ahh thats great! was my fault for pressing the power button before the vol down key I had tried a number of times, but all working now! Thanks guys!
had this too but hspl3 flashing was enough. no need to uninstall magldr.
and remember if you get it on it's not bricked
I wish people would stop using the phrase "bricked" so loosely.
Your phone isn't and wasn't "bricked".
Still if that would have not fixed ,A task 29 usually fixed bad flashes, try that .
I rarely see a HD2 bricked,Lets not use the phrase so loosely.
dharvey4651 said:
Put your phone in bootloader mode(pull battery, insert battery, volume down+power on) and flash the LATEST stock ROM.
This should keep HardSPL but remove MAGLDR.
After flashing the stock ROM, update to latest HardSPL.
Reinstall MAGLDR V1.11 from thread.
Try to install Android again.
___________________________________
Thread moved to Q&A since this is question, not a discussion.
Click to expand...
Click to collapse
No need to remove MAGLDR or flash a stock ROM.
All he needs to do is flash HSPL2.08 and MAGLDR will then continue to boot - I found this out myself.
hi guys i flashed my htc hd2 wm6.5 to nand android rom in 1st 1 week of usage i have no problem and enjoyed the nand android rom in my htc hd2 until one day my hd2 hang and when i reboot my unit it was hang on splash screen only....
i reflashed it using magdlr ver. 1.11 into the same nand rom im using but i have no luck...it still stock on tje android splash screen...what will i do guys?
im planning to flash it to wm6.5 rom,but what will i do?it never boot on tri color screen it only boot on magdlr screen
and how can i flash it wm6.5 rom cook or stock rom i want to revert it back to wm6.5
my hd2 running on gingerbread 2.3.3 nand(V1.8) rom before it malfunction..
Well, my forensic analysis has come up with the following technical and somewhat difficult solution to your present problem: "Click the search button"
Now I know it may sound intimidating, but I tested that feature out for you and came up with this:
http://forum.xda-developers.com/showthread.php?t=905841
matt
Shut down completely your phone (remove batter for 15 sec too)
Place battery back and now hold volume down button.
Still hold volume down button and switch on your phone.
You get 3 color screen.
Now attach your usb cable and connect it to PC
Find on this forum your phone stock win mobile rom (link to officila roms thread)
Run stock win 6.5 rom exe (this is sample name: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe)
Follow instructions on your PC screen. On final your phone reboots.
Enjoy your stock phone.
hi datasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
can i flash wm6.5 rom into magdlr usb flasher?
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
Switch off, hold vol down button in and switch on.
As ClydeB1, states you must hold the vol down only and not hold the power button.
siapelbo said:
hi dasoft thanks for the quick reply...
i try your suggestion to enter into bootloader mode but it booted on the magldr screen...
Click to expand...
Click to collapse
when you get ready to power back on you have to hold volume down and keep holding it while is booting and it should switched to the tricolored screen, plug the usb cable and it should say usb at the bottom when it connects, and if you have hardspl which I know you have after running android, you can use any custom winmo6.5 rom it doesn't have to be an official rom.
can i flash wm6.5 rom into magdlr usb flasher?
No, flash from bootloader.
awts...i cant enter into booloader mode....im so sure what im doing i sure i follow the instructions of you guys....holding down the vol button and switch on
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
I don't think you can flash WM6.5 with flasher. You have to restore from recovery screen by remove battery and restore.
ClydeB1 said:
Are you holding it at the bottom of the button and not in the middle or top, ie as if you are turning the volume down?
Click to expand...
Click to collapse
yeah im sure i was holding down the volume botton and switch the power on
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
ClydeB1 said:
Does the vol down button work normally in the Android rom or when moving around in magldr. To be sure, remove the battery and leave it out for 10 minutes then put the battery back, leave the cover off and try again.
I have heard of one or two users who have also had a problem where the vol down button stopped working. If that is the case there is no way back AFAIK.
Click to expand...
Click to collapse
volume botton is perfectly working it work around in magdlr mode actually i flashed my hd2 into android rom right now flashing is done without problems, but its not boot normarly it boot only in splash screen....
can you guys post a link of task 29...i will try this method and flash stock rom
but the main problem is i cant enter into bootloader mode
I use this tool for Task29 - http://forum.xda-developers.com/showthread.php?t=917807
Once you run Task29 though it will wipe the NAND memory and magldr and if you can't get back to bootloader mode then you will be stuck on the splashscreen.
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
temporary_24 said:
Hi,
I'm also having problems, but in my case the progress bar on my phone when installing the new ROM stops at 0% and will stay there indefinably. On my computer a connection problem will be raised.
The same happens with task29.
I've also tried decompressing ROM Utility, putted leoimg.nbh on my 2GB fat32 formatted sdcard, hold down the volume key.
I will get a new screen with "Loading..." on it, but it freezes there.
So, I have no idea what I'm doing wrong.
Any help will be appreciated.
Regards,
Click to expand...
Click to collapse
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
ClydeB1 said:
Are you sure you still have hspl installed? In bootloader, check your spl version- it should end in hspl.
Click to expand...
Click to collapse
Hi,
Yes. I had one with a 8 on it. I've installed the other, and it worked (or the other way). Thanks.
Regards,
guys my phone revive with a jtag procedure i went to a technician shop here in the phillipines
my phone running in stock rom again...
Hi everybody,
I wondering how to rollback to 6.5wm ROM?
I've got WM7 + magldr 1.12
Thank you!
Boot your HD2 in bootloader, then flash RUU with offcial HTC ROM for your region. Or flash any Android through MAGLDR.
Thank you!
raven_raven said:
Boot your HD2 in bootloader, then flash RUU with offcial HTC ROM for your region. Or flash any Android through MAGLDR.
Click to expand...
Click to collapse
This isn't working for me, when I try to flash anything the phone reboots itself and Error [244]: Invalid Model ID is displayed on the RomUpdateUtility.
Anyone know what's causing this?
Thanks in advance
You're not actually at HSPL, you're at some other middleman screen from MAGLDR, it looks similar but the text on the screen is completely different.
I think how I got past it was to keep on holding the (vol down?) button down, while I launched the ruu flasher, it errored out on the computer, the phone rebooted, but this time into HSPL. Then you can let go and flash as normal.
thanks very much, worked a treat
I recently tried to load Magldr 1.13 and it finished loading but when the phone restarted it got stuck on the "Stick Together" screen. I tried to restart while holding the Volume Down and and Power button and also the Volume Down and Volume Up buttons but the bootloader doesn't load at all..Is there anyway to fix this?
You only need to hold down the volume down button in order to enter bootloader. Also please be sure your volume down button is working.
I tried to hold the volume down button..i'm sure my volume down button is working..but how do you know for sure?
Well from what I am reading you are unable to get to the magldr screen so it is difficult to tell if the volume down button is in fact working. Also before installing magldr did you perform a task29?
Nemesis1278 said:
Well from what I am reading you are unable to get to the magldr screen so it is difficult to tell if the volume down button is in fact working. Also before installing magldr did you perform a task29?
Click to expand...
Click to collapse
No I didnt perform a task29..before this rom I was running Android on it..then i did a hard reset which restored it back to Windows 6.5..Then I tried to run the magldr and the screen just got stuck after I ran the 1.13...I remember the screen asking me if I wanted to move from a version 3.14 to a 2.0 or something like that..Did that have anything to do with it?
Well after installing windows and before going back to magldr you needed to perform a task 29 to delete windows from the phone. Windows may still be on the phone and you may be able to force it into boot loader if it is able to connect to activesync. It has been a while since I have done it that way so I don't recall how.
Sent from my HTC Sensation 4G using XDA App
Nemesis1278 said:
Well after installing windows and before going back to magldr you needed to perform a task 29 to delete windows from the phone. Windows may still be on the phone and you may be able to force it into boot loader if it is able to connect to activesync. It has been a while since I have done it that way so I don't recall how.
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
It can still go to activesync if the phone doesnt get past "Stick Together" ???
I doubt that it will but it doesn't hurt to try. And if activesync does connect then you should be able to reinstall windows rom if i remember right.
peterjayrolle said:
It can still go to activesync if the phone doesnt get past "Stick Together" ???
Click to expand...
Click to collapse
Nemesis1278 said:
I doubt that it will but it doesn't hurt to try. And if activesync does connect then you should be able to reinstall windows rom if i remember right.
Click to expand...
Click to collapse
what do i do if it doesn't connect?
Then I am lost because I do not see any other way to get into the bootloader, but I will try to search.
---------- Post added at 12:10 PM ---------- Previous post was at 11:49 AM ----------
I am not sure if you are having the same issue but it seems similar check out post number 10. So it may be the ribbon keypad cable that needs to be replaced for you.
http://forum.xda-developers.com/showthread.php?t=1324276
OK I'll try this and let you know if it works
start from the beginning !!
flash original rom, flash hspl, flash radio 2.15.50.14
do task 29,
flash magldr, flash recovery, flash rom !!
!!
aaki_rocker said:
start from the beginning !!
flash original rom, flash hspl, flash radio 2.15.50.14
do task 29,
flash magldr, flash recovery, flash rom !!
!!
Click to expand...
Click to collapse
I can't flash if I can't get past the "Stick Together" screen
eeeeek! i hope you didn't brick ur phone. Did you try the little yellow reset button next to the sd slot? tooth pick will work.
peterjayrolle said:
I can't flash if I can't get past the "Stick Together" screen
Click to expand...
Click to collapse
which stick together screen ??
:O !!
aaki_rocker said:
which stick together screen ??
:O !!
Click to expand...
Click to collapse
the T-Mobile splash logo
mr.shenanigans said:
eeeeek! i hope you didn't brick ur phone. Did you try the little yellow reset button next to the sd slot? tooth pick will work.
Click to expand...
Click to collapse
yes I did..it just went to the "Stick Together" screen and stayed there
peterjayrolle said:
yes I did..it just went to the "Stick Together" screen and stayed there
Click to expand...
Click to collapse
You loaded a custom wm ROM and it didn't change the splash screen? Do you have HSPL 2.08?
Sent from my Dell Streak 7 using xda premium
Where exactly can I find this task 29?
peterjayrolle said:
yes I did..it just went to the "Stick Together" screen and stayed there
Click to expand...
Click to collapse
i think you have probably flashed the wrong radio !!! :O !!
just try flashing a stable compatible radio !!
here is the link for radios : http://forum.xda-developers.com/showthread.php?t=611787
you can flash the radios using nbh installer,
or hd2 toolkit
or put the radio on the memory card, rename it to LEOIMG.nbh and go to the bootloader screen and flash it from there !!
!!
good luck ....
Is there still no way to change,update,reset rom with dead volume buttons?
I have aMAGLDR V1.13 running and a Miui rom.
Thanx
Try to flash touch recovery.
.........
I don't believe there is anything you can do...I had the same problem, so I opened the phone and fixed it...I suggest to take it somewhere to repair your phone...don't try yourself to fix it if you don't know what you are doing...you will make bigger problems...
Flashink said:
Is there still no way to change,update,reset rom with dead volume buttons?
I have aMAGLDR V1.13 running and a Miui rom.
Thanx
Click to expand...
Click to collapse
Try my guide, but you will go back to wm6.5 and then u can get the "enterbootloader.exe" and it will go to tricolor screen and u flash clk 1.4 NOT !.5 because it needs volume buttons, so when u have clk u flash a recovery that supports touchscreen and u flash any rom. That is wat I did, but do this if u followed my guide first and dont forget to thank me if it worked.
http://forum.xda-developers.com/showthread.php?t=1900302
stevediaz said:
Try my guide, but you will go back to wm6.5 and then u can get the "enterbootloader.exe" and it will go to tricolor screen and u flash clk 1.4 NOT !.5 because it needs volume buttons, so when u have clk u flash a recovery that supports touchscreen and u flash any rom. That is wat I did, but do this if u followed my guide first and dont forget to thank me if it worked.
http://forum.xda-developers.com/showthread.php?t=1900302
Click to expand...
Click to collapse
Will do wish me luck
Flashink said:
Will do wish me luck
Click to expand...
Click to collapse
Be very careful man! good luck!
Your wellcome,
Sent from my MID7022 using xda app-developers app