Related
Hi XDA developer
I need help as my HTC HD2 MOBILE is not reboot I have tried the hard reboot and nothing happens.
two questions;
1. if i was to install a new verison of the rom Altermis v 26. which i have downloaded there is a another software called SSLD that I also need to download where is this. And how do i do this.
2. what happens if i cannot reboot the phone TOTALLY - in order to get to the operating screen where i can restore factory settings. I have also done a soft reset and still cannot getting into the phone.
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
HELP!!!!!!!!!!!!!!!!! PLEASE
keilah said:
THE MOBILE IS STUCK ON THE "HTC" PRE BOOT UP SCREEN AND NOT PROGRESSING FORWARD FROM THIS POINT.
Click to expand...
Click to collapse
did you flash a custom rom before this happened? If so, it is likely that you forgot to update to a compatible radi. Look through the thread for the rom you downloaded for details.
Hi
oK I under stand but if you was intsalling Altermis v26 on your phone.....there is a additional file where youy down load the software before transferring to your phone what is that software??????
please callled and where can i downlaod this
do you mean hspl? see my sig
yes
if that allows you to download "software" to the HTC HD2 device....and can you kindly please post the link here. and any steps i need to be aware off as i am new to this site.
Once again may thanks for all your feedback and assistance.....
the link is in my signature
"One HSPL3 to rule them all - all leo's supported, all spl inc tmous 2.10.0000"
hi there, my hd2 has spl 3.03, radio 2.15 and ROM 3.14. from doing a bit of research on the forums I've found that i can run Android roms without needing to flash. however after trying a few different roms they all seem to freeze on the white htc screen even after leaving them go boot for around 30 mins. can anybody please help me with this issue?
appreciate any help given.
Bump.
Does anybody please have any ideas? I bought the HD2 because I thought I could run android on it...
I've tried multiple ROM and android build combinations and the only one I can get to boot up is from the minimum "energy" package. I've formatted the SD card in each case, and still no luck. I;m new at this whole process so I'm sure I'm screwing something up
Hello!! Me too, i have the same problems : Artemis v44, Rom 3.14, radio 2.15.50.14. and i have 8gb sd card. I tryed different android rom, but it's the same problems.
I continue to try....
Sorry for my bad english.
read the other threads with the same topic on the 1st couple pages...
basicly the proven way to fix it is to format the sdcard to get rid of ghosts that are left over from old data.
Does that mean a full format or Quick format? Ive try quick multiple times. And what first couple of pages are you refering/ Thanks for the response!
full format actualy wipes it, all quick does is removes file names.
you da man! Im doing a 16g......its taking a long time.....is that normal?
Well.....that didnt work. Full format on a 16g SD. Still locks up on HTC screen. Any ideas. Gonna try new SD card tomorrow.
I have the same result, use a new 8g card, android build MCCM_SE_V3.3_FroyoStone_Sense. On my first boot OK. I need to change battery and sim often. switch off and next boot stay on HTC screen forever... Found some solution saying that you must run the two "exe" within 15 sec. after boot into WM, but still doesn't work... help help
Same problem here.
Tried all the steps.
Installed HSPL2
Upgraded radio to: 2.12.50.02
Fully formatted my sd card
Tried several builds (FRG83.MCCM_IR_1.7 & desire hd2)
But it keeps on freezin at the HTC screen when booting.
Any help would be very much appreciated since I'm very much out of guesses.
have you tried deleting cmd line?
Same Problem...
Rom 3.14.407.2
SPL 3.03
Radio: 2.15.50.14
pls help
jose makalolot said:
have you tried deleting cmd line?
Click to expand...
Click to collapse
Nope, I haven't. Could you explain or link me some explanation?
Gr
TJ
teejee said:
Nope, I haven't. Could you explain or link me some explanation?
Gr
TJ
Click to expand...
Click to collapse
open startup.txt and delete the whole line with "set cmd..." then try to boot android again.
jose makalolot said:
open startup.txt and delete the whole line with "set cmd..." then try to boot android again.
Click to expand...
Click to collapse
This got me further yet it didnt work fully. It got me passed the HTC logo and unto the Android logo but then it crashes and fully restarts.... into windows.
So this might be a different problem... any thoughts?
teejee said:
This got me further yet it didnt work fully. It got me passed the HTC logo and unto the Android logo but then it crashes and fully restarts.... into windows.
So this might be a different problem... any thoughts?
Click to expand...
Click to collapse
I can give you a copy of my modded system.ext2 based on mdj 1.7, maybe it will work for you. Maybe we can do it through IM. Just PM me.
By the way, what is your location and carrier? I cant see info, am using phone.
Sent from my HD2 using XDA App
Ive formatted multiple times and have ran different Android ROMs. NOTHING. Only thing that works is the basic one provided by ENERGY. (Thanks by the way). Not that this is a bad ROM, Im just trying to learn about this stuff and its frustrating. I'm sure there is more guidance within the threads, but thats like pretty difficult if you dont know where to look
adb logcat
post it, then we can troubleshoot.
dont know how to do that? search. theres atleast 10 stickies in the forums on adb for dummies.
also, i get kinda tired of folks begging for help that cant even do simple stuff like fill out location, sig line etc... come on throw us a bone.
made this video for anyone whos unsure on how to do it, hope this helps someone.. feedback apreciated
INFO FROM VIDEO DESCRIPTION INCASE ANYONE NEEDS IT
In this video i show you how to install windows phone 7 to your htc hd2.
DO THIS AT YOUR OWN RISK
WP7 STOCK ROM + MAGLDR 1.12 + LATEST LEO512/1024 RADIO
http://www.mediafire.com/?dx3k459a2k3m3dr
ZUNE Software (Sync Music, Video, Pictures & Apps)
http://www.mediafire.com/?pesqg3asdoghea3
____________________________________
POSSIBLE WIFI FIX: PULL OUT your SD CARD and RESTART your PHONE
IF YOUR HAVING ISSUES WITH MOBILE DATA (INTERNET) NOT WORKING THEN CHECK OUT MY POST ON XDA, I HAVE TRIED TO INCLUDE AS MANY CARRIERS AS I COULD, IF YOU HAVE ANY THAT I COULD ADD THEN PLEASE LEAVE THEM IN THE COMMENTS
http://forum.xda-developers.com/showpost.php?p=10635210&postcount=1
____________________________________
HOW TO INSTALL HSPL
NOTE:To install this HSPL there must be SPL 1.42.0000 on your device. Otherwise the installation will fail! To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM with this SPL version.
1. Download HardSPL package from http://www.mediafire.com/?44nvdoc45zykmen and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL3_PKG.exe from your pc and read all the text carefully
4. When finished reading click next in the HardSPL program
5. The program will now check the usb connection and enter bootloader screen (tri colour)
*You can select between SPL2.08.0000 or 2.08.HSPL. This is to avoid people with 1024LEO's installing an incompatable version and bricking their device*
6. Select 2.08.HSPL for HardSPL and click NEXT.
7. Your choice will be flashed to your phone.
8. When its finished the HardSPL program will pop up a box saying "Successfully Done" and the phone will reboot.
9. Click ok to terminate program.
10. Congrats, you just flashed HardSPL.
____________________________________
Visit this site for information on dual booting android and WP7, the site is in Chinese so it has to be translated but the instructions are clear enough.
http://translate.google.com/transla...rcesteam.com.cn/thread-25910-1-1.html&act=url
Thank u - good guide!
Sent from my HTC HD2 using XDA App
can i flash back to wm mobile if i flashed wp7?
peeewee said:
can i flash back to wm mobile if i flashed wp7?
Click to expand...
Click to collapse
yes, just flash a stock or custom rom back to your phone
Download
Hi where do i get to download it? please...
Thanks!
Can you post the link?
TheAgent1982 said:
Hi where do i get to download it? please...
Thanks!
Can you post the link?
Click to expand...
Click to collapse
its in the description
thanks, i needed this guide!
Any chance you want to make a video of how to get the market working?
saw the video and i must say it's pretty straight forward, well done mate! this should be a sticky topic i reckon. although i'm quite happy with my hd2 running android and have no plans of flashing to w7, i'll keep this in mind should i decide to take the plunge. much appreciated.
Dear People
i was trying to install WP7 on my HD2. I did not check my HSPL version I guess it is 1.42
I downloaded the rom and installed MAGLDR112
It iis displaying white screen with a message this operation will delete all your personal data and reset all setting to manufacture default Press volume UP and all
It is not entering in bootlegger mode what shall I do please help me guys
Thanks.. it's a great vid!!! juz a question, how do i go about flashing back to WM6.5 custom ROM??
isit the usual way by entering boot mode and use customRUU to flash any workable ROM??
blacker87 said:
Thanks.. it's a great vid!!! juz a question, how do i go about flashing back to WM6.5 custom ROM??
isit the usual way by entering boot mode and use customRUU to flash any workable ROM??
Click to expand...
Click to collapse
yep that is it.
Thanks....!!
deadman_walking1 said:
Dear People
i was trying to install WP7 on my HD2. I did not check my HSPL version I guess it is 1.42
I downloaded the rom and installed MAGLDR112
It iis displaying white screen with a message this operation will delete all your personal data and reset all setting to manufacture default Press volume UP and all
It is not entering in bootlegger mode what shall I do please help me guys
Click to expand...
Click to collapse
You need to only hold volume down (not both Up and Down) and then switch device on
Could someone please HELP !!!!
i flashed the WP7 ROM from DFT everything works fine except for my memory card, the phone seems like it dsnt read anything from the SD card as if it wasnt there ?
What should i do
windows live id?
having trouble signing in with windows live id everytime i try it says my windows phone needs to be activated is this right or am i doing something wrong?
Thanks in advance mimic
cd78 said:
Thank u - good guide!
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
just can not run a 1.12 on his MAGLRD HTC HD2. I uploaded all HSPL as explained in the post to install WM7, but could not go. Does anyone know where I go wrong? MAGLRD start, the screen on the HTC HD2 blacks, but not to go to load is about 5 minutes to 0%.
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Dukan91 said:
Could someone please HELP !!!!
i flashed the WP7 ROM from DFT everything works fine except for my memory card, the phone seems like it dsnt read anything from the SD card as if it wasnt there ?
What should i do
Click to expand...
Click to collapse
Many sd cards are not recognised/compatible with WP7. You'll see a thread in this forum dealing with the compatibility issue and trying to identify which sd card types do work.
mimicuk said:
having trouble signing in with windows live id everytime i try it says my windows phone needs to be activated is this right or am i doing something wrong?
Thanks in advance mimic
Click to expand...
Click to collapse
That's right you need to get a Windows live activation code from MS. There is a hack that needs to be applied to "trick" the market into thinking the device is an HD7, but you still will need the activation code. See here
saletije said:
just can not run a 1.12 on his MAGLRD HTC HD2. I uploaded all HSPL as explained in the post to install WM7, but could not go. Does anyone know where I go wrong? MAGLRD start, the screen on the HTC HD2 blacks, but not to go to load is about 5 minutes to 0%.
Click to expand...
Click to collapse
Do you have hspl of 2.08.hspl or 2.08.0000. You need the hspl bit at the end. Also do you have a 50 series radio of at least 2.08.50 installed?
idono said:
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Click to expand...
Click to collapse
You will need to manually enter your APN details.
idono said:
Thx. Nice guide, worked perfecly for being the first time flasher
Only have the problem that i cant connect with my 3g.
Click to expand...
Click to collapse
you need to use APN settings, google your apn settings for your operator then enter them into the settings menu
Hi,
I Have An Htc Elf 100 Hang On Green Display....
It Is Able To Go To Boot loader Mode....
And When I Am Updating It's Rom It Is Just Stucking At 2%
If Someone Have Any Solution Kindly Share It.....
BR
What error when updating on the PC? OR are you flashing by SDcard? You checked to see if it is CID unlocked? What rom are you running? IPL/SPL?
Green display being Windows Mobile?
Check the sticky at the top of this section.
captainstu72 said:
What error when updating on the PC? OR are you flashing by SDcard? You checked to see if it is CID unlocked? What rom are you running? IPL/SPL?
Green display being Windows Mobile?
Check the sticky at the top of this section.
Click to expand...
Click to collapse
1: ROMUpdateUtility has encountered a problem and needs to close. We are sorry for the inconvenience...
2: I am updating it's rom via pc....
3: How to check if its CID unlocked or not...??
4: RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe I am Using This Rom....
Okay, as thats the case, make sure your read the stickies, until then I can't help.
captainstu72 said:
Okay, as thats the case, make sure your read the stickies, until then I can't help.
Click to expand...
Click to collapse
OK Buddy Now I Am Trying To Flash It With Hardspl....
http://forum.xda-developers.com/showthread.php?t=445666
But elf-uspl.exe Is Not Detecting The Phone...
I Think Bcoz Active Sync Is Also Not Detecting It....
Can I Flash Hardspl Via Sd Card...??
Hi, I have the hdc hd2 with spl 3.03.0000 xe, and radio 2.15.161.3.
You maybe able to tell by that that im new to this, but want to install android as i dont like windows 6.5. I've managed to install a stock windows rom with the information i've learned here. But now i need help.
I want to install froyo or gingerbread as ive used these before on other phones.
So what is the easies way to do it and wheres the best place to get the rom from.
Please try to make it as simple as possible, Thanks.
It depends, do you want NAND Android or are you happy with running SD Android? Basically, if you want SD Android it couldn't be simpler. Just go to the SD section, download a build, place the Android folder on the root of your SD card and hit CLRCAD then HARET in the file manager. If you want NAND Android it's still pretty straightforward. Follow this guide and you should be fine. If you find even this guide too complex try using the NAND Toolkit. If you can't use that, don't bother flashing NAND Android and stick with SD Android.
Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Edit v1.1:
lol, I guess you're right, It's a double win . Furthermore, I just couldn't b.a. to look for a recent guide, I simply made a quick google about guides for hd2-android and this came up, didn't really check it
Next time, I'll be faster ..... and use bigger words
Marvlesz said:
Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Click to expand...
Click to collapse
Muahahahaha, I win Also, you linked an outdated guide for the DFT Stock desire build, so I double win (if that's possible)
Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?
tradvang said:
Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?
Click to expand...
Click to collapse
*sigh* did you read Marvlesz's post about Google? Download HSPL4 and use it to flash HSPL 2.08, no ROM downgrade is necessary. Basically after you've done that it's as simple as flashing MAGLDR, CWM and your ROM (and trust me, all of that won't take you more than 30 minutes at the very most).
Marvlesz said:
Next time, I'll be faster ..... and use bigger words [/B]
Click to expand...
Click to collapse
Lol, just got that part
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
tradvang said:
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
Click to expand...
Click to collapse
Check your device manager did u see mobile device? and is it working?
if not try to Reinstall the WMDC driver?
I used to have this problem too after i reinstall the driver the phone will be detected again.
However if u still can't connect the phone to your PC (it's driver problem, i think).
Try task 29 Change to cLK for me it fixed everything. (using HD2 toolkit is easiest way)
Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?
tradvang said:
Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?
Click to expand...
Click to collapse
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
tradvang said:
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
Click to expand...
Click to collapse
Basically all ROMs use CWM, other than the DFT Stock Desire ROM. For everything else, just download the MAGLDR version of the ROM if there is one (many ROMs automate MAGLDR/cLK), change your system partition to the required size and flash the ROM.
hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
tradvang said:
hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
Click to expand...
Click to collapse
Screw it, I can't help you if you're this f**king stupid.
Cheers nasty c*nt.
tradvang said:
Cheers nasty c*nt.
Click to expand...
Click to collapse
Is that how you say thanks to those who were trying to help you ?
Follow this : http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7 شبر بـ شبر and you should have Android by the end of its steps.
(btw, post reported)
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
What do you mean by "Difference between mods" ? All mods come in a .zip package that is flashed in CWM.
When you download something (any mod, rom, kernel or anything) off the NAND section (this : http://forum.xda-developers.com/forumdisplay.php?f=928 ) it is going to be a flashable CWM. (Unless noted)
But when you download something off the SD section ( this: http://forum.xda-developers.com/forumdisplay.php?f=735) it is going to be ... well ... to be put on the sd without flashing.
Is this what you are asking for ?
Nigeldg said:
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
Click to expand...
Click to collapse
tradvang said:
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
Click to expand...
Click to collapse
Sorry, but I have every right to call you stupid too. I even posted DOWNLOAD A NAND ROM, and you go on and download ROMs from the SD section? It's frankly pathetic if you can't do that little reading, and if I were you I wouldn't bother flashing anything in the future. You're lucky you have a pretty much unbrickable device, because if you didn't I'm sure you would be sitting right there with a useless piece of hardware right now.
Thanks Marvlesz, thats got me sorted, the problem was when he said just download the "MAGLDR version", i thought anything with that in the name was the correct one. I'm not here to get into a slanging game so i'll just leave it that.
Thanks again.