Related
Hi,
I have tried for over a month now to get my Softbank X01HT(same as HTC TyTn and tmo MDA?) to work with the t-mobile usa gprs with no luck. I have contacted t-mobile and spent over two hours on the phone with them trying different things to get it to work. I would like to know if anyone out there has gotten this to work and if so please share with me how? Also, is there something preventing the phone from accepting a connection from t-mobile? The phone was purchased unlocked. I am using the HTC TyTn ROM on this phone.
Thanks in advance,
Mine works fine
Hi Braheem,
I have a softbank x01ht and have it connected to the tmobile network here in cali. When I first got it i just dropped my sim card in it and input the network settings from tmobile and I was on surfing the web with no problems. Three days later I couldn't connect. I allowed this to go on for three days and I finally called t-mobile. The first lady I talked to in tech support said everything was fine and nothing was wrong with my account. Then she asked if I wanted to go to pda support so I said sure why not. I just told them that my phone was the same as the mda II and she informed me that what had happened was I was on the 5.99 internet plan and they had a script run through and disconnect ppl that were using that plan with pda's. Only thing I think is maybe seeing ppl with high internet usage and then disabiling it? She said if I sign up with the pda plan for 29.99 then I would be able to get on in 24 hours. 12 min later i was up and surfing the web again and it has been that way for over a week. She said to get to pda support just say pda at the voice menu. Anyway hope this helps. If you need network settings they are on the t-mobile site, but i can help you out more if you aren't sure what to put or where to put them.
DocGSXR
I have an x01ht with the 19.99 blackberry plan in california, usa. Mine has been working all the time. all you have to do is on your "my-tmobile" change your phone to any blackberry and get the 19.99 add-on internet plan and allow 5 to 10 minutes for the plan to activate, on your htc go to start>settings>connections>Connections click on add a new modem connection
and fill everything out:
Enter a name for the connection: whatever you want
Select a modem: cellular GPRS, 3G
Access Point Name: wap.voicestream.com
leave user name, password and domain empty and click finish
Now from here you can have internet but its going to take a while the first time you try to access it. Open PIE (Pocket Internet Explorer), you will see a pop-up notification when the gprs/edge is connecting. load any website. I suggest using google.com to make the load faster. Its going to take around 2 to 3 minutes for the page to load completely.
Now here is something nobody else has done in this forum, something new and fresh. You want faster internet? Here is what you have to do:
First, download and install a registry editor (I personally use PHM RegEdit)
Open it and go to HKEY_CURRENT-USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
now look for "ProxyEnable" click on it and make sure the value data is set to 1 (it will enable proxy to work on PIE), if it doesn't exist (which i doubt) create it, to do that go to edit>New DWORD and fill it out like this:
Value name: ProxyEnable
Value Data: 1
Base: Decimal
click ok.
Now create a string value with the name "ProxyServer", to do that go to edit>new string value and fill it out like this:
Value name: ProxyServer
Value Data: 216.155.165.050:8080
click ok.
Now restart the device and run PIE, you will clearly notice how the pages load faster.
The reason I know this is because I am a network professional, I will not explain in detail why this settings make the internet faster but ill try to make it as clear as possible:
You can get the 5.99 t-mobileweb that will allow you to ONLY use the PIE. You will not be able to use e-mail, stream media or use im clients because the ports are blocked.
The blackberry add-on plan will allow you to do everything possible with internet on your device but they internet speed is slower.
Both plans use the same servers but the ports make the difference in speed, so to take advantage of the best qualities from both plans I added the proxies for exclusive use of the PIE in the registry (since there are no settings in the PIE software to configure the proxies).
I hope it helps you. Please forgive my weird english i'm Colombian. if you need further help feel free to PM me.
I am new to windows mobile devices but I can be of help with things related to networking.
How about on AT&T's 3G network?
Interesting posting. But would your suggested ProxyServer value be good also for AT&T 3G network? Actually, I am trying to use my Softbank X01HT(Hermes200) with a non-AT&T ROM to access its Media Net (with a Media Max bundle plan), but don't know the proper settings.
All I saw so far were postings for Cingular (AT&T) 8525 which is officially supported by AT&T and perhaps >95% similar to X01HT in hardware. But I suspect the ROMs for these two phones are different, so the settings should be different too. Is it true? Can you help? Thanks.
cant anyone help me out with this? i went through the AT&T fuze tutorial online yet it still cant connect.
i dont think its because my device is a -82 vs the newer -85 is it? i got this phone with the understanding that the -82 will work but not at full 3g speed. thanks!
ive downloaded/installed the proxy patch 2.1 and att wat medianet and mms cabs...to no avail
Is the phone running a stock HTC ROM? If so, just run the HTC Connection Setup Wizard from Start -> Settings -> Connections. It will detect your AT&T SIM, and configure the MEdia Net connection correctly.
Oh, and moving out of ROM Development.
yea i have that set with wap.cingular access point and it cant connect still....no usernames or passwords or domains.
this page to be exact
http://www.wireless.att.com/answer-center/main.jsp?t=solutionTab&solutionId=KB95893
got up to the proxy part since there is no proxy program thing my t8282
b-16707 said:
yea i have that set with wap.cingular access point and it cant connect still....no usernames or passwords or domains.
Click to expand...
Click to collapse
When you look at the advanced setting of the connection it created, make sure that under Proxy Settings only "This network connects to the Internet" is checked. "This network uses a proxy server to connect to the Internet" should be unchecked.
I've used the T8282 on ATT and am currently using T8285. Both worked without a problem. Is the phone detecting your sim card? Is ATT network set-up, but your just showing now service? Look at your phone settings and check to see if a band has been selected ie GSM 1900/2100, auto etc. I don't recall the stock rom as well, haven't used it in 6 months, but if I recall, go to settings tab in manila, select the phone, wifi, internet etc. option, then select phone. You should find an option that says change band. Select it and see what band your phone is set to. If anything, check auto, and see what happens.
NotATreoFan said:
When you look at the advanced setting of the connection it created, make sure that under Proxy Settings only "This network connects to the Internet" is checked. "This network uses a proxy server to connect to the Internet" should be unchecked.
Click to expand...
Click to collapse
yes those are done.
Sean3 said:
I've used the T8282 on ATT and am currently using T8285. Both worked without a problem. Is the phone detecting your sim card? Is ATT network set-up, but your just showing now service? Look at your phone settings and check to see if a band has been selected ie GSM 1900/2100, auto etc. I don't recall the stock rom as well, haven't used it in 6 months, but if I recall, go to settings tab in manila, select the phone, wifi, internet etc. option, then select phone. You should find an option that says change band. Select it and see what band your phone is set to. If anything, check auto, and see what happens.
Click to expand...
Click to collapse
if it doesnt detect the sim card i wouldnt be able to call right? i can call. phone functions fine (cant send txt messages though for some reason but can receive).
im looking under settings > phone
Current network: AT&T Wireless
network selection: automatic
band: both network and GSM/UMTS set to auto
Did you say above that there was no username or password set in the settings->connections->connections? In other words the required username and Pass of Medianet?
yes those fields are left blank as per atts support page i linked
Go ahead and select "manage connections" under Media Net. On the next screen choose edit and go through until you can add the user and pass
All caps
Username: [email protected]
Pass: CINGULAR1
I had to fill these in manually when I first received my T8285. My data worked thereafter.
You're configuring your unlocked HD via the set up of a carrier based ATT Fuze. I think may be some of the problem. I configured the settings on mine seemingly a hundred times, but never in the manner suggested by the linked support page.
yea i was reading that and just checked this thread
http://forum.xda-developers.com/showthread.php?t=447648
and did what you said....no luck
tried [email protected] and [email protected] too
this is stupid. haha shoudltn be this hard. thanks for all the support, i appreciate it
lady at att did say this plan took effective 1.5 weeks ago so even though i called in today to change my plan to a data one...it should be working...
probably be easier if i could screenshot my phone....
Mine is [email protected]. Out of curiosity, did you input it in "all caps"?
yep tried:
[email protected]
[email protected]
[email protected]
[email protected]
my sim card is really old...can that be a problem??
phone should be "dialing" wap.cingular correct?
i wonder if there are problems with my phone because i cant send text messages either and if i go to settings > phone > services tab > voice mail and text messages.... it cant get any info from the network...
Yes indeed. Mine is two years old. Some that still have the cingular card have had issues. I guess the quickest way to find out is pop someone else's sim in to see if it configures your setting properly. When you go through set up initially, your ATT settings should be populated automatically. I'd like to see you get this working.
well my sim card is way beyond that. it was before att changed their name to cingular (and apparently back to att again now). got it when i got the sony ericsson t610 when it was first released...2003???
i wonder if this truly is the problem and i wonder if i take it into a store will they help me out since i have an unsupported phone.
phone when i got it new was able to call right away when i first got it and first popped in this oldie sim...so as far as settings are concerned, its working in that aspect
A sim that old could most certainly be the problem. ATT should support you. If it's the sim, then it's a service related issue and not an issue with the device. It may be that you just run by att and have them pop one of theirs' in and see. Another thought, after inputing the username and Pass, are you soft resetting?
I've used this cab on some devices (e.g. xperia) to get the AT&T data to work.
http://forum.xda-developers.com/attachment.php?attachmentid=67434&d=1201326345
see if that helps for you. I believe it's designed for the Tilt but shouldn't do any harm on your HD...
ok i finally figured this out after going to the att store. it turns out it was indeed my sim card that was keeping me from sending text messages (back in this old thread i started http://forum.xda-developers.com/showthread.php?t=515288&highlight=send+text+messages).
the online issue was due to 2 things. the att lady told me she had added a data plan but turns out when i went to the store the dude there checked and there was no data plan. second was again because of the old sim card.
my sim card was from back in the days of the sony ericsson t610 back in 2003 before att became cingular (and now back to att again).
so hopefully this thread can be future reference for others that may have trouble with their blackstone! woohoo!! i am connected now. feels good to have internet everywhere i go.
Hi! I am experiencing trouble connecting to AT&T EDGE on my unlocked Topaz. I purchased this phone aware of the fact that I wasn't going to have 3G available but not having EDGE as well is very disappointing.
I have an AT&T GoPhone account and I have also installed the recommended settings from the Connection Wizard that popped up when I had inserted my SIM Card. However, I constantly have a gray E icon on my status bar and I am unable to access the internet. When I test the internet connection by trying to update the weather I get the following error: "The answering modem disconnected. To check your connection settings and change them if needed, tap Settings."
I have called AT&T they kept me waiting for an hour and were not able to help me. They were going to file a report for the tech support to review but they did not file the report that because I did not have another telephone number to give to them beside my cell phone for them to call me back(I am an international college student, I don't have a land line). I then tried to get help from their online chat support but their system won't allow me because my account is a GoPhone. So I am stuck here with my $450 dollar phone not able to enjoy its features to its full extent .
Is there anyone else that has experienced this problem? Or is there anyone that could help me configure the connection settings manually?
Thanks!
erdamn said:
Hi! I am experiencing trouble connecting to AT&T EDGE on my unlocked Topaz. I purchased this phone aware of the fact that I wasn't going to have 3G available but not having EDGE as well is very disappointing.
I have an AT&T GoPhone account and I have also installed the recommended settings from the Connection Wizard that popped up when I had inserted my SIM Card. However, I constantly have a gray E icon on my status bar and I am unable to access the internet. When I test the internet connection by trying to update the weather I get the following error: "The answering modem disconnected. To check your connection settings and change them if needed, tap Settings."
I have called AT&T they kept me waiting for an hour and were not able to help me. They were going to file a report for the tech support to review but they did not file the report that because I did not have another telephone number to give to them beside my cell phone for them to call me back(I am an international college student, I don't have a land line). I then tried to get help from their online chat support but their system won't allow me because my account is a GoPhone. So I am stuck here with my $450 dollar phone not able to enjoy its features to its full extent .
Is there anyone else that has experienced this problem? Or is there anyone that could help me configure the connection settings manually?
Thanks!
Click to expand...
Click to collapse
Check with your service provider that the edge service is enabled for your account. Then check you have paid for the correct plan (I don't know the procedure that applies to AT&T, but they may require all this).
If you have everything enabled/paid for then there is no technical reason why you should not be able to connect unless there is no service in your area!
pa49 said:
Check with your service provider that the edge service is enabled for your account. Then check you have paid for the correct plan (I don't know the procedure that applies to AT&T, but they may require all this).
If you have everything enabled/paid for then there is no technical reason why you should not be able to connect unless there is no service in your area!
Click to expand...
Click to collapse
pa49, thanks for your reply. I am sure that edge service is enabled for GoPhone accounts (not 3g though) and I am sure there is service in the area. If I am not wrong, the gray "E" icon on my status bar is telling me that there is edge available but that I am not able to connect to it.
I am just hoping that there is someone here that is using an unlocked HTC touch diamond2 in the united states that is able to access the internet via edge.
erdamn said:
Hi! I am experiencing trouble connecting to AT&T EDGE on my unlocked Topaz. I purchased this phone aware of the fact that I wasn't going to have 3G available but not having EDGE as well is very disappointing.
I have an AT&T GoPhone account and I have also installed the recommended settings from the Connection Wizard that popped up when I had inserted my SIM Card. However, I constantly have a gray E icon on my status bar and I am unable to access the internet. When I test the internet connection by trying to update the weather I get the following error: "The answering modem disconnected. To check your connection settings and change them if needed, tap Settings."
I have called AT&T they kept me waiting for an hour and were not able to help me. They were going to file a report for the tech support to review but they did not file the report that because I did not have another telephone number to give to them beside my cell phone for them to call me back(I am an international college student, I don't have a land line). I then tried to get help from their online chat support but their system won't allow me because my account is a GoPhone. So I am stuck here with my $450 dollar phone not able to enjoy its features to its full extent .
Is there anyone else that has experienced this problem? Or is there anyone that could help me configure the connection settings manually?
Thanks!
Click to expand...
Click to collapse
Go into Settings\Connections\Connections\Advanced and make sure both networks are set to MediaNet and take out the proxy server if there is one.
Bruce Inman said:
Go into Settings\Connections\Connections\Advanced and make sure both networks are set to MediaNet and take out the proxy server if there is one.
Click to expand...
Click to collapse
It didn't work
erdamn said:
It didn't work
Click to expand...
Click to collapse
Ok. Make sure you have the correct settings. Then in Manage existing connections tap and hold the modem connection and delete the entry. Reset the phone and then input the settings again manually. Don't let the phone run the auto connection setup.
pa49 said:
Ok. Make sure you have the correct settings. Then in Manage existing connections tap and hold the modem connection and delete the entry. Reset the phone and then input the settings again manually. Don't let the phone run the auto connection setup.
Click to expand...
Click to collapse
Unfortunately what you have suggested is not working also :S.
Maybe I have something wrong with my settings. Even though I have done a lot of searching in order to find the correct settings for an Unlocked Diamond2, I have not been able to find the settings specifically for an Unlocked Diamond2 with WM6.1/6.5. The settings I found were for previous versions of WM or were for another HTC model.
erdamn said:
Unfortunately what you have suggested is not working also :S.
Maybe I have something wrong with my settings. Even though I have done a lot of searching in order to find the correct settings for an Unlocked Diamond2, I have not been able to find the settings specifically for an Unlocked Diamond2 with WM6.1/6.5. The settings I found were for previous versions of WM or were for another HTC model.
Click to expand...
Click to collapse
What radio are you running?
I hate to say it but I don't think your going to get it to work. And I'm sorry because its all my fault! See for the past 4 years I have been a DM for AT&T and one day I was braging to our "smartphone support team" about how with my 8925+WMWifi+PayGo account with the 19.95 unlimited data package I could brodcast 3g wifi speeds through out my entire house with no need to worry about being charged overages for the 5GB soft limit (simply because no "real" info is needed to create a paygo account you can just say your name is Jon Doe and the give you one)
Two days later I got an email that the prepaid unlimited internet service had been disscontinued forever :-(..... And much more security was added to the system....
Your best bet to get internet working on the device is to put your sim card in an old moto razor (this way your razr IMEI doesn't flag you as a "smartphone" ) dial 611 and subscribe to the highest data package you can which is like 200MB or something.
Then you can put your sim card back in the TD2 and you should be good to go... for 200Mb's that is.... then your SOL...
and again sorry... you know what they say "loose lips sink ships"
or if you have a credit card or bank account switch to Pick-Your-Plan its a lot cheaper minute wise in the long run and you can have unlimited data just make sure to give them a bogus IMEI to some crappy razr you can find in every household....
Hi guys,
So I flashed, rooted and installed GreyBlur on mu Bell atrix, by following instructions from "seven2099"
It installed great and I have noticed a HUGE improvement in speed and other things.
Only problem, is now I can't connect to any bell networks for my 3G.
WiFi works fine. I am only posting in here, because I am not aloud to post in the developers section, so I am hoping this message can either find its way to "seven2099", or someone in here might know whats up.
Thanks in advance!
If you can do everything except connect to the Internet via 3G then you need to add your APN settings back in:
http://androidforums.com/827267-post4.html
Don't forget to "Save" (menu button/save) after you type all that in...
ccrows said:
If you can do everything except connect to the Internet via 3G then you need to add your APN settings back in:
http://androidforums.com/827267-post4.html
Don't forget to "Save" (menu button/save) after you type all that in...
Click to expand...
Click to collapse
Good but for one thing: Do NOT fill in APN Type. In the linked post it says 'Internet + mms'. I could not get a connection when I had that filled in, as soon as I set APN Type back to undefined it worked right away.
Just sayin'
excellent!
all worked out great!
thanks alot guys!
Bell Atrix always Roaming after 2.1.1
HI all
I spent two days trying to get to the bottom of this..
I installed 2.1.1 on Bell Atrix.. the first things I noticed the little (r) near the signal, checked the system info and it say ROAMING, my Data does not work unless I put Data Roaming on..
I am with Fido, and of course FIDO cannot tell me if really I am paying Roaming charges until the bill date which is 20 days away..
has anyone experienced that problem and has an explanation of some sort? Am I really Roaming or becuase its FR SBF the phone is reporting Roaming??
this is very disturbing and puzzeling as well.. any thoughts is really appreciated.
i'm using 3 in australia, i got 3g signal but i can access the internet using my data connection. the phone said "no radio". does anyone know why and is there anyway to update the radio firmware?
I'm with Vodafone in Australia and have no problems with internet whatsoever... I had to play around a bit with the apn settings though to make it work; you might consider calling up 3's customer service for assistance. I'd recommend you ask for the settings of several/all WP mobiles they have on offer, one of those settings will surely work
DVP_AU said:
I'm with Vodafone in Australia and have no problems with internet whatsoever... I had to play around a bit with the apn settings though to make it work; you might consider calling up 3's customer service for assistance. I'd recommend you ask for the settings of several/all WP mobiles they have on offer, one of those settings will surely work
Click to expand...
Click to collapse
thanks for your advise. btw could you show me how you config your apn?
Go to
'Settings' -> 'Celluar' -> 'edit apn'
Here you have to enter your provider access point name (apn);
I'm not sure, maybe this site will help you?
Doh! I just realised I can't post any links until I don't get more posts
Just type 'apn australia 3' into Google, I'm sure you will find heaps of results...
If not, as I said before, best check with 3's customer service, they will certainly be able to help you...