as above, it has
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
i tried soft resetting but still the same problem, is it bricked??
please help
Your phone is not bricked.
Try hard resetting the phone if that don’t work install the original ROM and start over.[FONT="][/FONT]
Related
first of all im from the netherlands and im a 17 year old student
i tried to understand most of the tuts.but nothing worked for me
i runned an hard spl on my s200 g4, and after that i tried to install an win6.1 rom
and my phone got stuck
tri color scree
ipl 2.10.0001
spl 2.21.0lip
and it wont install any other roms ( not even the official rom)
anyone who can help me?
read again, again, again and again flash guide must work
i have htc 8125 wm 5.1
i was upgrading it to wm 6.every thing was fine.but then i try to upgrade it to 6.1
and active sync disconected at 60%
now when i turn on the phone i get cingular screen and
IPl 2.25.0001
SPL 2.25.0001
GSM 02.25.11
and no OS version is loading.please help my to fix it
someoneee said:
i have htc 8125 wm 5.1
i was upgrading it to wm 6.every thing was fine.but then i try to upgrade it to 6.1
and active sync disconected at 60%
now when i turn on the phone i get cingular screen and
IPl 2.25.0001
SPL 2.25.0001
GSM 02.25.11
and no OS version is loading.please help my to fix it
Click to expand...
Click to collapse
Your problem is NOT fatal. If you were able to start the flashing, you have enough to search and read through the forums on flashing. I have had the "RGB" screen problem happen to me. I read through the forums carefully and found the answers. Give it a shot.
Plug your phone in and flash "This ROM"
thanx for the link.But i can't install any os because i can't connect to activesync.I tried in boatloader but still can't connect.Can you help my?
ow right.i did it.I search this forum and found some usb sync drivers.then connected the phone and setup works.thanx for your help!
Hello
Got here friends htc wizard (MDA VARIO). After dunno what only boot screen appears and thats all. Bootmanager is accessable.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
I am able to put there button rom, but thats all. I tried many roms, but noone can be instaled. Also tried love wizard rom. I dont have the original rom.
Batery is loaded up to max.
Any suggestions?
Ok solved, it was problem with flash tool.
EDIT: still i dont have any functional ROM. The love wizard rom doesnt boot up. I dont have access to original rom. I am nearlly at end of ideas.
I was able to load there this ROM:
RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.exe
But still it freezes on boot screen.
Please, anybody got a rom, that works in a Mda Vario from slovakia? Its for sure cid blocked and i dont have a functional rom.
Hard reset is not possible. He says, that failure at format. Any body got some idea????
maybe you can try to update your IPL to 3.08 and GSM to 2.x
sailor_sky said:
maybe you can try to update your IPL to 3.08 and GSM to 2.x
Click to expand...
Click to collapse
Tryed and still not working. But thanks for your post
Hello all!
I need urgent help with my T-Mobile MDA Vario I (Wizard 200) G4 (2006):
I wanted to upgrade to WM6 and used Hard SPL to do that. Read all the tutorials.
After applying Hard SPL the boot screen read:
IPL: 2.21.0001
SPL: 2.21.Olip
GSM: 02.19.11
OS: 2.24.2.5
Then I flashed the ROM with "RUU_WM6_XB_FUSION" .....
Result: At reboot it hang in the old T-Mobile boot screen stating:
the above IPL and SPL but
GSM: 02.47.21
OS: 10.0.0.0
The only thing I can do now is:
go into boot loader mode by pressing camera and stylus
and reflash it with the same RUU: it still hangs....
Not possible to reconnect to Active Sync anymore so cannot remove Hard SPL to go back to original OS with Soft SPL....
SO WHAT NOW???? Please Help, I am at a loss, just bought it...
you need to install a non official windows mobile 5 rom that doesnt have spl / ipl built into them (ex: wizard love rom) google it.
Brought back to life!
Many thanks: I did what you suggested and it's back amongst the living!
Now I need a stable G4 proof WM6 RUU....any suggestions???
fhjmgb72
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You can tried to reload your last ROM (WM6), for this :
-Start in bootloader mode ("Voice Command" + "Power" + Reset with Stylus)
-Start a new upgrade Rom (With the last ROM)
It's works ?
If yes, you can upgrade Radio and SPL.
i did that but the flash process stopped at 3% (i think CID locking problem). i tried USPL but the process could not be done. i also dont have my previous ROM but i noted the previous numbers which are
IPL 1.14.0001
SPL 1.14.0000
GSM 2.67.90
OS 1.14.0.0
tell me what to do now??
i dont have my previous ROM. nor i know what were the factory provided ROM
please help
You can :
-Flash your original ROM (Operator and langage)
-USPL and 1.11.cmon (verify that your phone is USPL before another action)
-Upgrade your new ROM.
i dont have the original ROM.
the phone is stuck at boot page. USPL not working.
what to do now
You must to download a rom from the Same Operator and same location.