Hello
Got here friends htc wizard (MDA VARIO). After dunno what only boot screen appears and thats all. Bootmanager is accessable.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
I am able to put there button rom, but thats all. I tried many roms, but noone can be instaled. Also tried love wizard rom. I dont have the original rom.
Batery is loaded up to max.
Any suggestions?
Ok solved, it was problem with flash tool.
EDIT: still i dont have any functional ROM. The love wizard rom doesnt boot up. I dont have access to original rom. I am nearlly at end of ideas.
I was able to load there this ROM:
RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.exe
But still it freezes on boot screen.
Please, anybody got a rom, that works in a Mda Vario from slovakia? Its for sure cid blocked and i dont have a functional rom.
Hard reset is not possible. He says, that failure at format. Any body got some idea????
maybe you can try to update your IPL to 3.08 and GSM to 2.x
sailor_sky said:
maybe you can try to update your IPL to 3.08 and GSM to 2.x
Click to expand...
Click to collapse
Tryed and still not working. But thanks for your post
Related
Hello everybody.
After i flashed the Radio ROM 2.69.11 to my Wizard..
Its broken, freezes on bootup and wont run.
the screen shows the following:
IPL: 0.3
SPL 1.03
OS 1.3.1.13
--------------------
How do i fix this problem?
Thanks
//Daniel ..
IPL 0.3? What did you loaded into it...
The Radio ROM may be too new for your IPL version...
If warranty is not important, Go to the Wizard Upgrade section and read the stickies, use Button's 1.05 ROM to unlock, then upgrade a newer IPL and SPL.
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
latii said:
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
Click to expand...
Click to collapse
Put it into bootloader, then flash from there.
Bootloader is.. Power + camera button.. right?
I got red/green/blue/ screen now.. with IPL 1.03 and SPL 1.03..
Connection USB and start the .exe file? (from buttons).
//Daniel
Wizard Works Again!!
Big Thankss To Alll !
Really Appriciate..
//daniel
Hi i have 2 part question my phone is an htc 8125 cingular sim card unlocked phone it has windows mobile 5 on it and i have the IPL 1.05, SPL.3.08 on it.
I did this but installing the IPL_SPL_3.08 rom. Anyways Im trying to get it back to IPL 1.05, and SPL 1.05 by installing the button rom and i seen the beer screen and it loads up to windows mobile 5 but keeps staying at IPL 1.05, and SPL 3.08 is there away to get it back to 1.05,1.05. I tried a few methods but aint working. Would keep reflashing a few times with the button roms get it back to 1.05,1.05. I tried with, newromupdateutility_wizard_noid. and didnt work i tried with rom update and didnt work. When a rom loads up and gets stuck at 99% and then i get a message with activesync saying lost communication error message whats does that mean and it saying try restore.
Also can windows mobile 6 with touch flo install on this phone or no. I was tring to do that with but all i got was it going back to windows mobile 5 and doesnt upgrade to wm6. Do i first need it to get it back to 1.05,1.05 using the button rom then use ,lokiwiz02b to do the unlocking(mind you my phone is all ready sim unlocked). and then flash a t-mobile or cingualr rom and then do the update with a windows mobile6 rom.
Whats a good windows mobile 6 with touch flo that works good on this phone can u maybe post a link
thanks for the help
deleted for inaccurate information
First,you shud have CID unlocked the phone prior to upgrading to 3.08 bootloaders,cuz it becomes very difficult and frustrating to downgrade from 3.08 to 1.xx.Now the only way is to first try to downgrade to 2.xx by flashing the official carrier's rom and when completed downgrade to 1.xx through Button's 1.05.You can only CID unlock the phone,if its 1.xx,which you already know.
Secondly,it'll only upgrade to wm6 if its cid unlocked.Try to flash ipl/spl 3.08 again and make both ipl/spl 3.08 first and then downgrade to 2.xx by flashing the official stock rom,it might work.
Cheers!
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM
i flashed with swiftblades V4 blue. the flash worked good, as it was suppost to but now the elf reboots itself ever 5 to 10 minutes or so. Also there is no entry for Rogers Data Plan in the network wizard. is there a way I could add that to the wizard?
Sorry, I have no much ideas to help, but talking about Wizard setup..
Can you download a more recent rom like onyx?
Cheers.
I had the same problem, if you have IPL and USPL 3.07 or higher you just have to downgrade the IPL and USPL tot 2.28.0000 or lower
Yes the problem in IPL this rom is an upgradre of an old rom (i think based on WM6) so you have two choices either change IPL or change rom
Hi,
I have tried to flash a wiza200 that was already flashed with a manila rom, I checked that it is a G4. I used TNT.20273 Professional Wizard HTC Home FREE ROM, it seems to work , romupdate utility indicated that the device was flashed successfully but it reboots on bootloader screen. I tried to reflash it it gave the same result, I tried another rom but impossible to flash it with other roms. So I downloaded the official one from the operator O2 but I got "invalid vendor" message. I searched all the possible solutions but none of them worked( wizard love also). Is there a savior here ? someone who can give me the right procedure to follow.
initially the IPL was 2.21.0001 and spl 2.21 Olipr
now the IPL is 2.21.0001 and spl 2.21
Thanks
Best regards.
You must replace the Update.exe with a MaUpgradeUT_NoID.exe . Found here in Forum . Look in "Blue Angel" for it. Be sure that you flash the right ROM with it . It will no ask...