Related
Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Flash cm6 first it will boot with 2.5
twiztid
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Phillysphinest1 said:
Hey MT4G guru's i need your assistance.
1st off im an Evo user..rooted and all so im not to shabby at doing this. 2nd I rooted her phone using visionary.
So on to the problem. I tried to flash her a theme. I nandrioded (backup) first as usual. The theme which ended up being a full ROM--> http://forum.xda-developers.com/showthread.php?t=929101
It flashed successfully but when i rebooted it gets stuck at the white MT4G screen and stays there forever.
**I can still get into the bootloader & recovery.**
Tried to restore...NO LUCK. It restores, I reboot then the Same white screen.
Tried to factory reset, dalvik & cache wipe..... NO LUCK
Tried Update.zip Nothing!!!
Even tried pd15img in the bootloader. NOTHING!! It doesnt even recognize it!!
Guys i even looked into odin which i found out it isnt needed on phones with recovery.
Hate to sound like a noob but Help!!!!
...A fixed phone will result in 30,000 "thanks" button presses.....cause shes pissed to say the least....
Edit: Ok i believe i found the problem. I had clockwork 2.5.1.2 instead of 3 on her phone. Ok so now that i found the problem how do i fix it??
Click to expand...
Click to collapse
Swyped on my rooted MyTouch4G
XfooYen said:
If you made a nandroid backup, which you always should do before flashing a new rom, you can restore it using clockwork 2.5.1.2. If you don't have a backup you can do two things. You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. If you don't know how to use fastboot then you can use the existing recovery to flash a froyo based rom on the phone. Either iced glacier or CM6 will flash ok. Perform a full wipe before you flash. Once you have a froyo rom working you can follow TrueBlue_Drew's thread about getting clockwork 3 on the phone without issue. I'm on my phone so I can't provide the link but it is in the mt4g development section. It is in a sticky called Resource Bible. In the OP, scroll until you see the header Recoveries and choose the link called Easiest way to install clockwork 3.0.0.5 by TrueBlue_Drew. Follow his instructions and you'll be able to switch between clockwork versions with no hassle. Of course, once you have clockwork 3 working you can flash CM7.
EDIT: Drew replied before I finished writing so follow his link once you are able to boot successfully.
Swyped on my rooted MyTouch4G
Click to expand...
Click to collapse
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
TrueBlue_Drew said:
Dooohhh!!! Thanks for cleaning this up for me. I forgot to tell him he needed to DL and install a 2.2 rom using his current recovery if he cant restore the nandroid. on a side note....I'm typing this from my laptop that is using my wifi hotspot from my friends truck somewhere (middle of nowhere) in Colorado in a snow storm. got to love technology. I am also downloading the latest nightly. Only 28 minutes left on this slow edge connection, but at least its working
Click to expand...
Click to collapse
Stay warm..
Swyped on my rooted MyTouch4G
TrueBlue_Drew said:
go to this link http://goo.gl/K0xTy and follow the instructions. you are flashing a cm7 rom and for this phone requires a different recovery. Then flash your rom
Click to expand...
Click to collapse
twiztidmyt4g said:
Flash cm6 first it will boot with 2.5
twiztid
Click to expand...
Click to collapse
UPDATE:
Ok.........(drum roll please)..........and the winner to the simplest answer that i should of thought of myself but i didnt cause i paniced is.....
TrueBlue Drew & Twiztidmy4g
All I needed to do was full wipe & flash a compatible ROM & it booted up fine!!!
**Attention XDA**
National crisis averted!!!! Woman is now satisfied. We nearly missed a nucular meltdown!! Thanks guys!!!!!
MODS PLEASE CLOSE OR COMPLETELY BURN & DELETE THIS WORTHLESS THREAD!!!!!
CM6 download
New to mt4g and have the same problem, i know i cant got o rom manager because i cant boot, can you provide a link to a cm6.zip file that i can run using clockwork 2.5.1.2
Thanks and yes i searched ont he forums for mt4g and i only see cm7 ....
"You can use fastboot to flash clockwork recovery v3.0.0.5 to the phone then reboot into recovery and successfully flash CM7. "
So how do you use fastboot to flash clockwork ? need help here i have clockwork on the sd card and installed using recovery but when i power volume down i am still in clockwork 2.5.1.2
How do i change clockwork to 3.0.0.5 from fastboot ?
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
cmboud said:
So how do you use fastboot to flash clockwork ? need help here ......
Found it.... http://forum.xda-developers.com/showthread.php?t=876632
Installed it and then updated clockwork now in CM& ... wow Thanks .... ?
Click to expand...
Click to collapse
Didn't even have to reply. The search button is a marvelous thing. Good lad!
Swyped on my rooted MyTouch4G
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
calm down take a breather us XDA users got your back, OK take out the battery and put it back in then go to the Hboot ( hold power and volume down) then once you get to the Hboot Settings use volume down to get to RECOVERY (i think its the third one) then once you get into Clockwork Recovery scroll down to (Backup and Restore) click then press (Restore) and then choose your Restore file it usually Year-month-day hope i helped you donate pls if i did
BE SURE TO KEEP THE CHARGER IN!!
p.s. if it turns off while its restoring even with the charger in let it boot into recovery mode and let it charge up a bit
incase you still need help gtalk me [email protected]
and p.s. CWM 3.0.0.5 is for gingerbread only
Certain roms require certain versions of clockworkmod. I don't know if this also applies to restoring from backups, though. Which type of rom did you flash?
If he flashed the add on 3.0.0.5 has ext3/ext4 support. Should be able to flash froyo and TB Rome.
Sent from my HTC Glacier using XDA App
3.0.0.6 supports ext3/ex4 3.0.0.5 only does Gingerbread
Edit: I'm being a dumbass yea what he said was right I'm overly tired and I have to explain to her why I was being a dumbass and trying to flash through fastboot but what I don't understand is why its still stuck at the boot screen
thisisjay said:
Hello,
I need some help. I decided to try out a mod while at work today. i tried it out and didnt like it too much and try to restore my last back up that i did before the change. the phone cut off then back on and was stuck on the mytouch 4g screen and has been this way for about 3 hours.i took the battery out and i went to the hboot screen and tried a factory reset and then the rom manager opened up (v3.0.0.5). from there i went to reboot now and it goes back to the my touch screen. idk what to do and i need help. im new to the droid and am unfamiliar with the terms. can anyone help PLEASE. if possible to gtalk me at j.d.louisy.
Click to expand...
Click to collapse
Three options
Option one: (easiest)
Since you flashed 3.0.0.5 you must flash a Gingerbread ROM, (Which you can download from here ). Make sure to flash the G/apps after you flash the ROM.
Option two:
you can flash a 2.x.x.x Recovery image, or flash 3.0.0.6 via script or manually do it via the HBoot.
Option three:
Flash the PD15IMG and start over from ground one.
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
thisisjay said:
thank you so much for the advice and help. i could bang my head on the wall for trying to load gorillasens. i shouldve left it alone. once i get home from work i will give it a try again.
Click to expand...
Click to collapse
Ah. i think i see what happened. You rooted your phone. downloaded Clockwork Rom Manager, then flashed a recovery image (which was version 3.x). then tried to flash a 2.2 ROM.
Okay. so what.....
a common mistake but one that can be avoided by doing a little research.
Clockwork's 3.0.0.5 recovery image is only compatible with Gingerbread (2.3) based ROMs.
Clockwork's 2.x recovery image are only compatible with FroYo (2.2) based ROMs.
gorilla is 2.2 So it's not cannot be flashed by the recovery image you are using.
if that is correct then the text in the recovery image should be orange in color. If that is correct.....If i were in your shoes i'd load CM7 w/ the GAPPS > download CWRM from the markert > scroll to the bottom (all clockwork recoveries) and flash the newest 2.x. then boot into recovery / make sure the text is GREEN, not ORANGE, wipe then flash your GorillaSense.
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
danger-rat said:
Can you cite a source, because I've also heard people claim that Clockwork 3 is backwards compatible, but there was no evidence either way...?
How would you go about switching from a 2.2 ROM to a 2.3 ROM? Do you have to backup with CWM 2, then install CWM 3 to install the new ROM? Doesn't make a lot of sense to me...?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
3.0.0.5 is not backwards compatible, which is the official 3.x that you download via the Application. 3.0.0.6 which is "beta" flashed via the HBoot is backwards compatible.
It's seriously jacked if you ask me.
to go from lets say CM6 > CM7 one would do a nandroid backup of CM6, then go to CWRM flash the 3.0.0.5 recovery image > boot into recovery and flash the CM7.
now to get back to a 2.2 ROM you have to scroll to the bottom of CWRM app's and flash a 2.x version of the recovery then do your nandroid restore, flash the 2.2 recovery image.
From what i've heard once 3.0.0.6 is finished you can use that for everything.
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
danger-rat said:
What a pain...
I'm real sketchy about the Clockwork 3 recoveries for the Nexus, because they've been screwing up partitions (mine included). Has there been any problems with Clockwork 3 on the Glacier?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I haven't had any problems with mine. The only problem that was noted was the 3.0.0.5 prior to the official release wouldn't do Nandroid Backups directly from the application. Some were reporting it work work from the recovery image, but mine never did.
and i have a feeling the reason it's screwing with Partitions is this (CM7/CW3.x) is a Ext4 set up. And CM6/CW2.x is a Ext3 set up.
but since it went official the only problem i've seen is people flashing the the wrong recovery for the wrong ROM. People are flashing 3.x because 3 is higher than 2 so they think it's an upgrade and have no clue on the who/what/when/wheres and whys of what its for.
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
danger-rat said:
The partition thing is different for the Nexus, because they are cross compatible to a certain degree. I rolled back to CWM 2, but I can still flash CM7 no probs...
It's interesting to note the differences between the two platforms though (Nexus vs Glacier).
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yea between Google's way of doing thing and HTC, but i'm sure the chip-set has something to do with that. and with the sexy nexi only having 512Mb of memory the factor of tricking the phone to use the SD card has something to do with it i'm sure.
i have the 3.x recovery and i can flash iceglacier which is a 2.2 rom with out any issues. what i can't do is restore my backup from my other phone onto this replacement i just got. i made the backup with the 3.x recovery but i just keep getting stuck at the mytouch bootup screen... gonna try flashing the 2.x recovery and see if it lets me do the restore.
hey there everyone. just giving an update.......phone is still messed up. we tried putting gingerbread on and no go....tried flashing to PD15IMG and starting over. no go, it kept saying that "main version older <bad>" the phone wont go past the htc screen. im going on day 3 and no phone. *sigh* open for more advice. should i just buy another phone?
OMG OMG OMG i fixed it.......thank you for this post http://forum.xda-developers.com/showthread.php?t=957457 i re downloaded the PD(insert file name) and it worked. i broke down in tears. thank you guys sooooo much.
I used the .zip file to restore my mytouch, but now it wont go into Hboot.
I got the same problem and is fixed thanx to this link
http://forum.xda-developers.com/showthread.php?t=957457
now I have to root the phone again
Thank you
Thank goodness someone had this problem
I just ran into the same issue. whew good thing xda is here!!! Thanks fellas
I have CWM 3.0.0.5 and I am unable to load any new roms now. I do not know if this is a common occurrence but everytime I try to boot into recovery, I get a quick flash of the htc logo and it just keeps going to the bootloader. Is this happening to anyone else?
Not sure what is causing it but when I had that problem I first booted to the ROM I had and went copied the *.img file for clockworkmod 3.0.0.5 to /clockworkmod/download/mirror1.kanged.net/recoveries/ by mounting my Desire Z as a disk.
I found a copy here of that *.img file in these forums
There is no reason to flash cw3 like that anymore. You can simply do it on rom manager now. You can only flash roms that support clockwork mod 3.
Sent from my HTC Vision using XDA App
Yep. I am guessing he formatted his SD card which happened to me once. Nice to know though that you can use this as an alternate method if anyone arrives at the same situation
Sent from my HTC Vision using XDA App
I didnt format my sd. also, it was installed via rom manager. I loaded virtuous and everything works great, but when I went to load up cm7, it wouldn't load into cwm.
the.goodhumorman said:
I didnt format my sd. also, it was installed via rom manager. I loaded virtuous and everything works great, but when I went to load up cm7, it wouldn't load into cwm.
Click to expand...
Click to collapse
Someone may need to correct me on this but at the top of my head there are certain ROMs that will not work properly with 3.0.0.5. You may need to downgrade it to 2.5.1.3.
Better clarify this first before going ahead.
iamthechickengod said:
Someone may need to correct me on this but at the top of my head there are certain ROMs that will not work properly with 3.0.0.5. You may need to downgrade it to 2.5.1.3.
Better clarify this first before going ahead.
Click to expand...
Click to collapse
The new 3.0.0.5 CWM recovery thru Rom Manager now supports all 2.2 and 2.3 roms. No need to use 2.5.1.3 anymore.
Sent from my HTC Vision using XDA App
MODS: I am unsure of where to post this so sorry for the trouble.
So I work for Tmobile and love showing off my rooted mytouch 4g in all its glory.
So I requested a warranty exchange and got a TAIWAN VERSION w/ GOOD SCREEN in return. Like Day and Night.
Upon Receiving my warranty exchange phone it was 2.2.1. I attempted the same Visionary Root Process, (however was there some extra file i needed to DL? i forget)
After rooting my new phone, S-Off, I had flashed FAUX stock kernel 0.4.0b.
THEN THIS HAPPENS:
I cant get past the mytouch 4g splash screen. The first logo that appears. It gets stuck or bootloops. I can HBOOT and get into recovery 3.0.0.5
This is all i can do...i already asked for another warranty exchange...but in the meanwhile..how can i fix this problem or what did i do wrong?
ALSO can you backup one mytouch 4g and load it back up on another mytouch 4g with the same sd card? Thanks!
I had this problem with my MT4G when I flashed his kernal. It seems that his kernals are not designed to work with every 4g device. I hope you did a nandroid backup on the device. I was never able to get past the mytouch splash screen with his kernals
Sent from my HTC Glacier using XDA App
Well, at since you can get into recovery there should be a number of things you can do to get your phone to boot.
Download a new ROM to flash, if you are on clockwork 3 then you need CM7.
Clockwork has usb drive ability, turn it on, transfer the ROM then flash.
If you can get into HBoot or Recovery on ANY phone, you're safe. Hell, if you can't get into HBoot, your phone wouldn't even start up since HBoot is basically the equivalent to BIOS.
THE VERSION OF CLOCKWORKMOD RECOVERY YOU USE IS CRITICAL!!!
The version you are using is for Android 2.3 only.
Flash a v2 Recovery with adb or fastboot and reinstall your kernel, or install CM7.
HTC Glacier CM7 41
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Tiltpoet said:
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
If you've ever connected it via USB, it should have installed the drivers automatically (at least on Windows). I think the ADB driver only installs if you had "USB Debugging" checked. Mass Storage usually only refers to mounting the SD card; the driver for ADB is different. Look for something like Android Phone or Android ADB Interface in your device manager (again assuming Windows).
If you have ADB set up, try running the adb devices command. If it spits back the serial number of your phone, you should be okay to proceed.
Don't exchange the phone, fix it...
Just use another phone to copy the latest CM7 to the root of your sdcard and flash, if that doesn't work do the same thing with a PD15IMG.zip file to the root of your sdcard, hboot and restore to stock.
I have no problem with someone doing a warranty exchange for a hardware issue, but if you break your phone, don't make someone else pay for it...
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
XDA you have been so helpful!
___bonus__also the haptic feedback on this phone was not as strong as my original..though idk if its just me or not..should i call tmobile and stop shipment of the OTHER phone? how is it i have a taiwan version plum W/ good screen?
There are no Sense-based Gingerbread (Android 2.3) ROMs available now ... Best practice its to make a Nandroid backup of CM7 with your installed CWM Recovery, then flash a version 2.x of CWM Recovery to install any Froyo (Android 2.2) based ROM.
HTC Glacier CM7 41
Tiltpoet said:
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
Click to expand...
Click to collapse
Good to see it is working.
Its mostly personal preference at this point. Sense on the MT4G is pretty responsive and has some nice features. CM7 has its own tweaks and features. You loose the sense widgets but many can be replaced with alternatives in the market. You gain and loose relative in both ROMs So try out both and decide.
Use ROM Manager app to flash a new recovery. One of the 2. versions, then flash a froyo based ROM.
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Tiltpoet said:
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Click to expand...
Click to collapse
Kernels are not ROMs, the kernel is the underlying software of an OS. The kernel talks to the hardware and lets different parts of the OS communicate. Kernels are ROM specific, or Framework specific. A sense ROM can not use a AOSP kernel and vice versa.
CM ROMs can be good on battery, or not. It all depends on personal use and how you set it up.
That is a good recovery to use when flashing sense ROMs.
Not sure about the updater. If it is the one I am thinking, it hasn't been updated in a while. I think it has been abandoned in favor of ROM Manager. CM updater did come in some of his older ROMs, before ROM manager became the norm.
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
As people have already said, you used the wrong version of clockwork, also, use clockwork to flash a new rom. And make sure you use the right version.
Tiltpoet said:
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Try fix permissions. If that does not work, do a full wipe (factory reset). If that still does not work, try re-flashing the ROM.
If you flashed a new kernel before you started having issues, this may fix it, or you may need to wipe caches and re-flash the kernel.
Hi,
My warranty has just run out on my Nexus One so I've decided to unlock the bootloader.
My Aim is to get from stock non rooted Gingerbread to rooted Gingerbread with busybox, SU, and ultimately being able to boot into ubunto in chroot, I've been reading up on all this for a few days now but just need a small amount of help with Recovery, Gingerbread ROM choice, and the order that thing should be done, by someone who's done this before.
I take it the first thing is to install SDK and get The USB Driver working on PC, its running XP by the way.
Then I unlock the bootloader, !HELP! to do this do I enter hboot or fastboot, before connecting the phone to the PC? I have to copy 3 files somewhere and use ADB and run command for **** OEM unlock, can't remember the exact command, (I've got instructions for this) and then agree to void my warranty etc.
I then find and download the correct custom recovery image and copy this into the tools folder of the SDK. And install (got instructions for this to).
!HELP!
Which custom recovery image should I use? and which Rooted Gingerbread ROM is most popular ?
After installing the custom Recovery can I just flash a custom ROM? I've seen something about SU.zip mentioned, is this necessary?
If I can just flash a custom ROM, I do this by downloading and copying the custom ROM of choice to the root of my SD card. Start phone in recovery mode and install from SD? I then install the google add ons .zip (if required) using the same method.
Sorry for such a long post and so many questions but I can find all the information for what I'd like to achieve but not in one place and nowhere in any chronological order.
Any advice appreciated .
Please read the Wiki, "Root" guides, "Unlock bootloader and install custom ROM" thread. Execute until the point of installing custom ROM.
Look in "Recovery" section for recoveries, install the latest Amon_RA.
Ive Successfully Rooted Gingerbread by following this method http://chensun.net/android-development/root-nexus-one-with-android-2-3-3-gingerbread/8/
GB ROM
Im running CM7RC4 and am happy w/ it
MouseIdt said:
Ive Successfully Rooted Gingerbread by following this method http://chensun.net/android-development/root-nexus-one-with-android-2-3-3-gingerbread/8/
Click to expand...
Click to collapse
Thanks everyone, but this looks like the one for me, going to unlock bootloader now install custom recovery and flash su.zip.
I'll post back with how I went on. Wish me look
A apprehensive newbie ;-)
Flash this as well, otherwise you will lose your custom recovery...
http://db.tt/cp7De8G
Sent from my Nexus One using XDA Premium App
Good show with unlocking the bootloader, it's the best way.
However... looking at your flag, you're in the UK... this means your phone is still in warranty, as we get 24 months.
Nooooo
Rusty! said:
Good show with unlocking the bootloader, it's the best way.
However... looking at your flag, you're in the UK... this means your phone is still in warranty, as we get 24 months.
Click to expand...
Click to collapse
My understanding was 12 months but, your probably right. I've unlocked the bootloader now and fortunately my N1 is in good condition, funtioning correctly ( well at least for now, I'll have to cross that bridge if and when I get to it )
Getting on to custom recovery, I realised something wasn't quite right after my first attempt. I installed custom recovery but without su.zip on my SD card. I managed after rebooting my PC to complete the custom recovery with su.zip on the SD card and was successful in that I've got SU on my N1. However I am quite sure I do need to fix something with the recovery, can someone explain what method or how I do this now. I've unlocked the bootloader, I am rooted with gingerbread but with a dodgy recovery.
Or do I do exactly the same as I did with su.zip and push recovery from ADB and flash from SD card, making sure that fix-recovery.zip is indeed on the SD card.
Hope this makes sence?
Any help appreciated.
After I unlocked my n1 I used rom manager for everything else, first flashing clockwork mod, then selecting a stable cm 7 build and flashing that, since then I've done everything through recovery, flashing custom kernels and nightlie builds, I'm currently using cm7 rc4 highly recommend rover theme too!
Sent from my Nexus One using XDA Premium App
sparkyryan said:
After I unlocked my n1 I used rom manager for everything else, first flashing clockwork mod, then selecting a stable cm 7 build and flashing that, since then I've done everything through recovery, flashing custom kernels and nightlie builds, I'm currently using cm7 rc4 highly recommend rover theme too!
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
I've got ROM Manager installed and if I want to try anything it tells me I have to flash clockwork mod recovery, I was unsure if It was safe to do this after using a completely different recovery image to get where I am now.
Sorry for being such a paranoid newbie, but we all got to start somewhere ;-)
sparkyryan said:
After I unlocked my n1 I used rom manager for everything else, first flashing clockwork mod, then selecting a stable cm 7 build and flashing that, since then I've done everything through recovery, flashing custom kernels and nightlie builds, I'm currently using cm7 rc4 highly recommend rover theme too!
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
I think CM7 rc4 is next, I do want to get Linux up and running though, even if it's in a virtual environment (chroot). and deffinately would like to check some nice themes out, I've not even looked at themes yet, I suppose it's quite easy after unlocking bootloader, installing custom recovery then flashing su.zip though. But still any pointers where to start my quest wouldn't go a miss ;-)
Recovery
its safe to let rom manager flash clockwork,ive done it
I heared about amonRA but it seemed like clockworkmod was more commonly used so I went for that, but yeah it's fine to flash a new recovery, just remember that whilst it's rare things can go wrong, it's YOUR fault not anyone's here regardless of the advice you may get here if your phone gets bricked or screwed up.
That said I'm still new to this but I'm learning as I'm going, just remember to backup your phone using rom manager before doing anything major so that you can always recover your phone/rom.
I started out hacking my nokia 5800 so was keen to have a go with the android platform.
Sent from my Nexus One using XDA Premium App
CM7 stable
Have you upgraded to cm 7 stable? its a definate upgrade