Maybe I'm blind, but is there a non-Sense NAND ROM out there yet? I've noticed everything based off the desire HD so far. Ideally, a stock non-sense with MDJ Kernel + CIFS would be perfect.
If not, what would the best nand release to start from and switch launchers/kernels be? I need CIFS support, so the stock Desire one wouldn't work for me unless there's a way to add MDJs kernel to it, and MDJ's roms have way too many customizations for my taste.
Thanks,
B.
http://forum.xda-developers.com/showthread.php?t=893637
CMN
Yup, there is, im currently using a Desire based build (not desire HD) from ocm7 with cyanogenmod to top it off
CM6.1 v1.02 in the android dev section of the forum
:L i see the guy above beat me to it
Sent from my HTC HD2 using XDA App
CMN is alright.
i get low signal and bad connectivity on that build
you could also give this a try
Nexus2HD nand
http://forum.xda-developers.com/showthread.php?t=895059
Thanks guys, my search skills must be diminishing with age I didn't try CMN because it said rmnet, and I didn't read the post to see there was a ppp alternative. That being said the nexus one build looks good too. When you had problems with CMN connectivity, were you using ppp or rmnet?
*Update*
Looks like as of today CMN doesn't support PPP despite the first post. And neither does the Nexus One build. Is PPP part of the kernel, or something else? IE if I replace with MDJ kernel, could that enable PPP?
Thanks!
MDJ's kernel has PPP connection i believe. but. im testing his new Super Lite Build
http://forum.xda-developers.com/showthread.php?t=866558
and its still dropping signals left and right. im begining to wonder if using NAND broke my radio
avisions said:
MDJ's kernel has PPP connection i believe. but. im testing his new Super Lite Build
http://forum.xda-developers.com/showthread.php?t=866558
and its still dropping signals left and right. im begining to wonder if using NAND broke my radio
Click to expand...
Click to collapse
I'm not so sure any of the NAND kernels have PPP actually. Even looking at the MDJ kernel thread, it appears to be using RMNET. This very second I'm watching CMN 6.1 NAND boot up after installing MDJ's kernel onto it though. I think this will be the best combination for me, especially considering the CMN build is missing all the modules anyway, so no WIFI, etc.
Thanks,
B.
let me know how it goes. as i am having no luck.
on any build.
mobile connection drops every 2-3 minutes.
sometimes loss of signal completely
im honestly thinking of going back to SD/RAM builds.
as i never had problems with connection on those builds.
avisions said:
let me know how it goes. as i am having no luck.
on any build.
mobile connection drops every 2-3 minutes.
sometimes loss of signal completely
im honestly thinking of going back to SD/RAM builds.
as i never had problems with connection on those builds.
Click to expand...
Click to collapse
Unfortunately it looks like MDJ's kernel also suffers from the 60ma Bluetooth Drain. And on top of that, no matter what kernel I use the CIFS modules don't work. So, next up will be to try CMN with the kernel from the stock Desire build. No CIFS, but at least I won't have that nasty battery drain.
*EDIT*
Well, for anyone else, don't try that. It won't boot. Time to reflash.
*EDIT2*
I take that back, just be sure to also take the initrd.gz from the DFT build, too.
*EDIT3*
Most likely the last update. DFT kernel wouldn't even turn Bluetooth on. There must be differences in the system.img causing this to happen, and I don't have time at the moment to debug, so I'll just leave BT turned off
Related
I don't much care for Sense, as do allot of users, which is I'm sure why there's an increase in CM based android builds.
I haven't tested all of these builds yet, but I'm downloading them now. I know the original ShubCRAFT works great, but hasn't been updated in a while, leading to Warrenb to re-cook it to add the new kernel with Wifi Tethering support, amongst other things.
I've been using for about a week now, the HyperDroid build, which has been amazing, though I've gotten occasional touchscreen freezes, causing reboots. But I can confirm data to work amazingly, in addition to the wifi tethering.
ShubCRAFT 1.5 (RMNET/PPP)
Warrenb's Re-Build of ShubCRAFT 1.5 version 1.2a (RMNET/PPP) - Wifi Tethering
Bansters 1.2a - Wifi tethering
HyperDroid 1.1 - Wifi Tethering
Post your experience with the various non-sense based CM builds, along with any builds I might have missed.
There is allot of general discussion on each individual build, but as each build changes so much from day to day, especially with kernel changes, it's hard to determine which is currently the best and most stable build for HD2. I personally prefer the CM builds as they have the additional settings (long press app number, and mostly the status bar tweaks with the battery/dBm indicator without having to install any additional apps or have them in the background running, taking up bar space with additional batteries).
shubCRAFT is my favorite. I've tried the others, but it feels most like stock CM6 to me and everything just works. I do wish there were other builds based on the nightly CM builds... But oh well!
Dan
For whatever reason I stick with shubcraft. Maybe its a loyalty thing but I feel like Im missing something whenever I am on a different rom. Also aslong as I dont tinker everything works out rather well I actually am starting to feel I have a real android phone and not just a port.
hazard99 said:
For whatever reason I stick with shubcraft. Maybe its a loyalty thing but I feel like Im missing something whenever I am on a different rom. Also aslong as I dont tinker everything works out rather well I actually am starting to feel I have a real android phone and not just a port.
Click to expand...
Click to collapse
I agree, it feels just like my nexus one.
I just downloaded Bangsters.....
USB Mass Storage/Tethering/Hotspot!!
I'd say it has the most features to date of all the builds.
But I wonder if the USB Mass Storage is working correctly 100%?
I know in other builds it's been disabled because of data corruption....
Did they just turn it back on or was that issue resolved?
Bangsters the best looking but shubcraft has the killer battery life using Energy ROM so far.
REVISION: Hyperdroid is becoming my personal favorite!
I'm using bangsters and gotta say I'm never going back to sense.
Sent from my HTC HD2 using XDA App
Shubcraft for sure.
I've tried them all, and Shubcraft is the most stable one out there (at least for me!) . Next to that, i took my phone from the charger yesterday morning and i still have 51 percent left (with SetCPU).
That is with internet, messaging, theming and email every now and then
Definitely Shubcraft, many congrats and thanks to its developers.
Htcclays SuperHD2
I like shubCRAFT but then i recently switched to Hyperdroid, and so far? I LOVE IT!
ive tried them all and for me me, its definitely hyperdroid!
Sent from my HTC HD2 using XDA App
Well as far as builds go htcclays 1.2 is flawless no sod slow wake ups and everything works
Sent from my Htcclay's SuperHD2 using XDA App
Htcclay all the way... no freezes, great battery life. Its my day to day is now.
Sent from my Htcclay's SuperHD2 using XDA App
Haven't tried the others, but hyperdroid v1.1 was good (no crashes, and a very few problems) and now the v 1.2 is even better, high frame rate and very fluid (1845 in quadrant)
I voted shubcraft because I've been using it daily since 1.4.
I just last night tried out hyperdroid and bangsters. Both of the used the really high res look which I like. I ended up liking bangsters more because launcherpro and adw were built in. Performance seemed about equal.
Its hard to give a preference if you just try them out like I did. They need long term use for a better evaluation. I wish one build was clearly superior to make this decision easier.
Stuck with bangsters as shubcraft hasn't been updated in a while.
mccm. good loking.
Switched to JDMS since shubcraft & hyperdroid are discontinued, and it's the best I've found thus far.
Been using Bangsters 1.5 and have been happy with it, even have it down to 0-3ma during standby. He's been slow to update lately though, as he had some IRL things goin on.
I was going to try Shubcraft, but then noticed it got discontinued, and didn't notice WarrenB's version, so I'll give that a try instead.
I did have some issues when transfering a large file (+500mb) to the card while the phone was running, and the system just didn't want to work right until I deleted that file, so not sure if the usb mass storage is working 100%. Perhaps there's a file size limit for "working".
HyperDroid is the first ROM that works stable, and I can actually use for more than a few hours.
Thus my vote is for HyperDroid.
Is there a build with no dropped 3G, no SOD and no touchscreen pauses?
I absolutely love Mattc's build and all the effort everyone has put into them, especially the kernel devs. I think it's incredible these work as well as they do and I'm using the mattc Evo Leo version as my every day OS....
I ask this question because mattc Leo + Froyo with Sense seems to have the screen pause and occasional SOD. I switched to the new mattc's EvoLeo which fixed the pause and SOD completely, but now my 3G dropps randomely. Usually when I'm using it heavily, it drops once every 15 minutes or so, but I've gone hourse without a drop as well..... Anyhow, I was just hoping there was a build, that fixes these or a tweak or kernal replacement that fixes these...
Also, The Evo Leo build is so stable that I don't see any reason why you would bother booting from NAND. Boot once from Windows Mobile and stay in Android as long as you want.... Its nice to, at least, have the option to boot WM... Maybe there are other reasons to put Android on the NAND?
Thanks,
Kevlar The Great
KevlarTheGreat said:
Is there a build with no dropped 3G, no SOD and no touchscreen pauses?
I absolutely love Mattc's build and all the effort everyone has put into them, especially the kernel devs. I think it's incredible these work as well as they do and I'm using the mattc Evo Leo version as my every day OS....
I ask this question because mattc Leo + Froyo with Sense seems to have the screen pause and occasional SOD. I switched to the new mattc's EvoLeo which fixed the pause and SOD completely, but now my 3G dropps randomely. Usually when I'm using it heavily, it drops once every 15 minutes or so, but I've gone hourse without a drop as well..... Anyhow, I was just hoping there was a build, that fixes these or a tweak or kernal replacement that fixes these...
Also, The Evo Leo build is so stable that I don't see any reason why you would bother booting from NAND. Boot once from Windows Mobile and stay in Android as long as you want.... Its nice to, at least, have the option to boot WM... Maybe there are other reasons to put Android on the NAND?
Thanks,
Kevlar The Great
Click to expand...
Click to collapse
lol not yet so far
yes there is more infor here
I've been using the following setup and it works very well for daily use (no SOD etc)
mdeejay Froyo Sense v. 2.2 with kernel from hastarin, v4.1
radio 2.14.50.04
winrom artemis 34.5 (not that i think it matters)
hspl3
Just be careful how you use SetCPU/ATK Froyo and other applications that interfere with the OS since this isn't a device with Android at it's core.
Oh, as for SetCPU, I set 384MHz min/max, userspace, while screen is off and I get ~5-6 mAh consumption while screen is in standby with WiFi off and about 60mAh with it on. I know it's not the lowest freq but it should be a good trade-off since my phone wakes up very fast.
OMG there totally is! I can't believe you haven't found that post! I also can't believe all of these other devs haven't found that post and copied the solution too! Lucky me that I found this next to the pot of gold at the end of this rainbow sitting next too Santa Claus and the Easter Bunny.
I have one!
Mdeejay 3.1 Desire HD
Nothing to say....smooth and fast....no drops on 3G or everything else.
the only issue is the camera.
With everyone using a different WinMo ROM, radio, hspl (maybe), and even some hardware differences, it's impossible to say.
I just played with different builds until I found one that works for me. Currently running HyperDroid 1.6
Phiredrop Skinny EVO has been perfect!
I used the beta version for days with no problems and now have the 1.1 version and it is perfecto!
pack21 said:
I have one!
Mdeejay 3.1 Desire HD
Nothing to say....smooth and fast....no drops on 3G or everything else.
the only issue is the camera.
Click to expand...
Click to collapse
u got a link to this build?
i use hyperdroid 1.5 stockified is almost perfect, i have minimal issues. the only major for me is that it uses rmnet instead of ppp. ppplease?
RmNet builds work for practically everybody with no dropped connections. Touchscreen pauses have not been completely eliminated yet, but they can be almost completely eliminated in regular use by either disabling the G-Sensor, or disabling home-screen orientation through ADWLauncher or LauncherPro.
PPP builds still drop connections for many people. A common workaround is to enable/disable airplane mode to soft-reset the connection.
EVO-based kernels use PPP. Nexus-One kernels use RmNet. Therefore, to avoid dropped mobile connections, use any Nexus-One based build.
Since you like MattC's builds, the last build of his that was RmNet based was 1.7. If you don't have a copy of it saved, you can download it here: (RapidShare link) http://rapidshare.com/files/416256755/mattcfroyosense1.7rmnet.zip
Personally, I am using HyperDroid 1.6 This build uses RmNet and is quite reliable. I've used it with Radios 2.12 and 2.14, with the VBN WM Rom, and have not experienced any SoDs, dropped 3g, or touchscreen freezes. Links are still on the front page of this forum.
Bangster v1.4 (self-modified)
#hastarin r6 kernel
#vbndroid winmo rom
#2.14 radio with hspl3
#stock 16g sdcard formatted with 32k cluster size
RESULT
#only 3mA batery usage during standby with wifi off!!
#great data speed and no dropped connection using PPP.
#no SOD, robot voice touchscreen freezes whatsoever.
#no issues with bluetooth
#802.11n Wifi with hastarin r6 kernel
#great graphic performance with darkstones graphic tweaks(included in hastarin kernel)
Hope this helps.
Sent from my HTC HD2 using XDA App
This is my setup.
WM Rom: Elegancia GTX
http://forum.xda-developers.com/showthread.php?t=654218
Android Build:mccm v1.5
http://forum.xda-developers.com/showthread.php?t=773790
Using Radio 2.12
Been using for more than a week and no SOD, 3G works fine.
I did a lot of trial & error with different WM Roms and Android builds and this has been the most stable choice for me.
You may wanna play with this one too:
# [BUILD][29.09.2010][FroyoStone Sense - V3.1][Kernel: darkstone]
darkstone's in the same league as mattc so this may turn out to be one of the perfect ones hopefully!.
Installed it over mattc leoevo 1.1 (due to data issues) and been running it with no issues so far..btw i have only tested data both wifi and cellular n some other stuff therefore the rest will still have to be checked out.
I second the phiremod build, definitely is a daily rom for me. I used to get SODs from every rom until I started using his.
I have very good usage with MIUI beta4 and mdeejay 1.5evo . These 2 roms are close to perfect , no screen freeze, no drop 3G, no touch screen issues, no sod
I am on stock rom 1.66 asian rom and radio 2.12
Of these 2 miui is best and fantastic fast very stable . Only issue is the ipone like ui. It's additional features is way ahead of htc desire hd new sense which I tested too.
Change Radio and HSPL
atifhassan said:
You may wanna play with this one too:
# [BUILD][29.09.2010][FroyoStone Sense - V3.1][Kernel: darkstone]
darkstone's in the same league as mattc so this may turn out to be one of the perfect ones hopefully!.
Installed it over mattc leoevo 1.1 (due to data issues) and been running it with no issues so far..btw i have only tested data both wifi and cellular n some other stuff therefore the rest will still have to be checked out.
Click to expand...
Click to collapse
I've been using this build too. It's BEAUTIFULLY smooth and works just fine.
Also, I believe (someone please correct me if I'm wrong) the SOD's have more to do with radio and hspl than anything. I was using a 2.08 radio and hspl 2 and I was getting SOD all of the time. As soon as I upgraded to 2.12 radio (and now 2.14) as well as hspl3 I have not had SOD once. During this process I was using the same Android and WM builds, so it seems it was the radio and hspl.
Im new to all this and still experimenting.
So far Hyperdroid 1.6 is doing the best job for me. I have had a few issues with 3G here and there, And getting this Touchscreen freeze problem a couple of times a day..
I am running
Latest Chuckyrom
Radio 2.14
8gb Sandisk Class 6 SDcard formatted 32kb cluster size
I am wondering how much influence windows mobile rom has on these android builds? I am happy with hyperdroid 1.6, without going rom flash crazy if someone could recommend a base windows mobile that plays well with this I will give it a whirl.
pack21 said:
I have one!
Mdeejay 3.1 Desire HD
Nothing to say....smooth and fast....no drops on 3G or everything else.
the only issue is the camera.
Click to expand...
Click to collapse
Nismo300zx said:
u got a link to this build?
Click to expand...
Click to collapse
Yeah, I'm with pack21 on this build - it's been great on my combo (see sig'), but I do however suffer from occasional data drops. It's great for daily use otherwise!
As for a link, that's a bit tricky seeing as the thread containing it was 'lost' when xda suffered it's server issues the other day. It was only up for about 24 hours, and I've not seen a link for it reproduced since. It would be worth your while searching for it though - I think you'll find it would be worth the hassle!
Thanks everyone (except maybe robkoehler) for your very helpful feedback. I was wondering if maybe some people had gotten a version of mattc to work without screen pauses or data drops, but it sounds that hasn't really happened.
I hope I can find Mdeejay 3.1 Desire HD because it sounds like thats a good one to try....
I've been using HSPL2, do you guys really think I'd have better luck with HSPL3? I just hate to mess with HSPL because ... it seems like the most risky thing we have to do to our phones...
I really appreciate the advice and I'll continue to monitor this thread for any more feedback.
Greetings,
I want to know your opinion .. Which Kernel do you prefer and why ??
- ElBartoME 2.6.32.9 #1 OR
- michyprima's R11 OR
- Darkstone OR
- Hastarin R7.1
-----> Currently i am using Hastarin R7.1 ... Tell me your experience ...?
Thanks ...
each dev puts hard work into each build. u shouldnt single out any of them by posting this poll.
there is no "best" kernel as there are good points in all of them and together they have created their own style of working.
All of the kernels are have similar tweaks so alot of things are the same i.e darkstones graphics tweaks and michys ext batteries.
I think that this would need to be a "which kernel do you prefer" rather than a best thread as this all falls down to preference. I for example prefer michy's kernel as i like having the higher clock speed and it has never let me down. I have tried others but keep coming back to michy's
mini_robot said:
each dev puts hard work into each build. u shouldnt single out any of them by posting this poll.
Click to expand...
Click to collapse
i didn`t mean any insult for any dev .. title changed !
I prefer michyprima's R11 as I find that current evo kernels break more things than they fix.
Please move this to Android general?
Sent from my HTC HD2 using XDA App
I see how this topic could become helpful. It could signal out which kernel is the most used, eventually, kernel devs could move from their stuck-up ways and work together on whichever kernel people consider to be better/more stable.
I'm on Matt 1.8 and his kernel had constant problems with data dropping and very frequent 2-3 second freezes that were just abnoxious.
I switched to hastarin 4.1 and then 7.1 and I wouldn't go back. My device's been on Android only ever since and it's staying that way.
agreed.
this is a bit of an odd issue, because personally I really don't like the Hastarin R7.1 kernels, and the darkstone ones work beautifully, but clearly that isn't the case, regarding the fact that that's the most popular one.
in retrospect, this probably isn't a very good idea for a thread, because its not going to show anyone which kernel to get, because they will most likely get a different experience to others
Jack E said:
I prefer michyprima's R11 as I find that current evo kernels break more things than they fix.
Click to expand...
Click to collapse
can you post that kernel please been looking for that
Michy Evo R0
I actually like the Michy Evo R0 kernel. For me all the nexus one based kernels have the problem of freezing up if you let it go to standby with wifi on, once it happens you don't have much choice but to wait until it unfreezes. All the Evo kernels have the problem with the delayed flash, but that's a smaller problem for me.
I don't think telling devs they are stuck up is a good idea. I personally use which ever I wanna try. It gives them each good feedback. They make changes and those fixes spread to other kernals.
Sent from my HTC HD2 Decepticon using XDA App
Im running Hastarin´s (4.1 or 5 i believe) in Mattc´s 1.8, im not sure which kernel was on that one, but im getting great results with this combination, standby drain goes down to 5ma at some points, and running with no SOD, almost none touch screen freezing, really minimal, and when they occurr it gets recovered pretty fast, im really happy with it, no 3G data for me, wifi works great though.
SLDS.
PS: Sorry about my english, i hope i made sense lol
I'm using Hastarin 4.1 ... didn't decide yet to move to 7.1 till most of users say it's OK.
I tried MichyPrima as well to see if it solves the data connection issues but turned out to be almost same performance like Hastarin's.
Jack E said:
I find that current evo kernels break more things than they fix.
Click to expand...
Click to collapse
I agree. This is why I didn't upgrade to Froyostone 3.1. Seems that all current issues still exists + delayed camera flash due to the Evo Kernel
Hastarin's 7.1 drops data like a son of a *****. I ripped the one out of Shubcraft 1.5... Never had a drop signal once.
Just go to advanced wifi settings and set wifi sleep to never
buzz killington said:
I actually like the Michy Evo R0 kernel. For me all the nexus one based kernels have the problem of freezing up if you let it go to standby with wifi on, once it happens you don't have much choice but to wait until it unfreezes. All the Evo kernels have the problem with the delayed flash, but that's a smaller problem for me.
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Gary.M said:
Just go to advanced wifi settings and set wifi sleep to never
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Do'h! Why didn't I think of that? Of course now that I've tried the desire HD builds I really really really want to use that, but that camera doesn't work at all.
Now that I think about it, kernel code is getting better all the time, this poll really is premature. Maybe 6 months from now we can really decide.
wawa144st said:
can you post that kernel please been looking for that
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=756513
Jack E said:
http://forum.xda-developers.com/showthread.php?t=756513
Click to expand...
Click to collapse
Haven't people doing nexus kernel, very unhappy...
Gary.M said:
Just go to advanced wifi settings and set wifi sleep to never
Click to expand...
Click to collapse
Just tried this with Michy R11 but unfortunately it doesn't fix the problem. Still freezes for a long time when I left the wifi on. Oh well, more the reason to try more builds
Hi, can someone list all RMNET builds? I've had enough of PPP builds, data disconnects all the time
no one knows of any?
rmnet
core droid v0.5
gmi0078 said:
core droid v0.5
Click to expand...
Click to collapse
how do you distinquish PPP from RMNET?
Usually the build will say somewhere in the description whether it is RMNET or PPP.
Try checking the threads to see what they are.
euro_e93 said:
Hi, can someone list all RMNET builds? I've had enough of PPP builds, data disconnects all the time
Click to expand...
Click to collapse
Since evo kernel, there is no rmnet build anymore. You've go to look for much older builds, like mid-august or less.
Search for NexusHD2 from tytung, its only one week old..its got rmnet option, which i'm using without any data drops..
The best rmnet build is probably ShubCraft 1.5 (it is not sense - not sure if you wanted sense or not)
bangsters 1.5 probably the best, everything is adjustable via startup.txt
Personally I've found hyperdroid 1.7 to be the fastest and most stable build out there, was previously using Shubcraft 1.5. With Michyprima r11 non axi kernel I have working bluetooth handsfree, wifi, wifi/USB router, stable 3g, mms, camera with flash & zero screen freezes. The only things I can think of that don't work are USB storage & light sensor.
Sent from my HTC HD2 using XDA App
so I have:
CoreDroid, NexusHD2, Hyperdroid, Bangsters, & ShubCraft...........anyone know which one consumes the least battery power on standby?
RMNET relies on the nexus kernel. most android kernels now have been built from EVO (PPP only) you can run a simple build, as i saw shubcraft was recommended and i agree. just be sure to run a nexus based kernel and you will be able to run RMNET. search around in development (DO NOT POST NEW THREAD) and you will find the new RMNET/PPP switch for nexus kernels.
RMNET On Latest MDeejay EvoSense
Try this here. I have been using it in the past 4 days without any problems whatsoever.
euro_e93 said:
so I have:
CoreDroid, NexusHD2, Hyperdroid, Bangsters, & ShubCraft...........anyone know which one consumes the least battery power on standby?
Click to expand...
Click to collapse
Tytung's build eats around 4-7 may/hour in standby.
I settled on Coredroid, all the other ones froze on me Thanks for all the help guys
Hey guys.. I've been running DarkStone for a while now, it ran perfect in most ways. Other than Very frequent Data Dropouts and some screen freezing occasionally. Other than that. it was perfect.
Would I be able to run DarkStone's Latest, and update the kernel to Hastarin's 8.5.1 oldcam or whatever? cuz from what I understand Hastarin's latest kernel has fixed data dropout's as well as screen freezing issues.
I'm now running BiffMod 1.3.1 and it's stock 2.2.1 with CM6.1 RC2 added to it. It would be ABSOLUTELY perfect for what I want, but I'm having the robot voice, and some sound issues like music doesn't sound right. And I can't dial any numbers. the thing freezes... I don't know a lot about Android on the HD2, and how to change all the kernels and all that.
Basically I want a Non Sense Build with some CM6 included and have it run stable.. Thats what I'm looking for. DarkStone was almost perfect.
Have you tried HD2ONE? Honestly I've tried several CM6 builds and they generally are very stable. Your issue might be deeper than the builds, I have heard people have lots of problems with class 10 cards.
I'm using phiredrops Cm6 build with the 8.5.1 old can kernel... I have no issues.
Sent from my HTC HD2 using XDA App
is there any release that have fixed the screen freezes. thats the only thing that bothers me much... at times when there is a call, the screen does not lighten up and u seem there isnt any call if mobile is on mute
Yes guys...
I got DarkStone and put Hastarin's 8.5.1 oldcam, and his newest HaRet that all come in his kernel download into the Darkstone.. so far BUTTER smooth
This might just be what I needed. It's sound is great, not a single screen freeze or data dropout since last night.. This is perfect! oh and I'm using the stock 16GB class 2 that came with the HD2. but I do have a Wintec 16GB class 10 coming tomorrow I'll replace it with
phone double posted. sorry