Related
Im on rooted Dell Official 351, and I still have screen freezes. Is anyone else out there having any such issues on an official build? I didnt have any issues like this with my first Streak. Beginning to get pretty frustrated with this nonesense. It especially occurs after a call. No other issues. Still enough to drive you mad.
Sent from my Dell Streak using XDA Premium App
Hi,
I had this issue only with the official roms. Never so far in the last 6 months on DJ Steve's ROMs.
I think the dialer uses more system resources in the newer Dell builds as I didn't have this issue with build 318 but now it happens every once in a while with build 351. It also seems the light sensor isn't working very well when on a call, because my streak seems to get confused and the screen will stay blacked out when I take it away from my face.
You've done the typical factory reset and then tested, right? You also updated to all of the build 351 files, right?
Mine does the same thing. I have found that it is the heat from your body that locks it up. When talking, keep your cheek away from the screen. When carrying in a pocket, turn the screen so it's away from your body. Mine hardly ever locks up now.
We've discussed this problem befored,the streak's screen is sensitive to heat,humidity(sweat,namely),and electric field.Keep your screen from all these things helps a lot.And recalibration is recommended if problem persist.
Sent from my Dell Streak using XDA App
BlueCrystal said:
You've done the typical factory reset and then tested, right? You also updated to all of the build 351 files, right?
Click to expand...
Click to collapse
I did all the typical stuff you've mentioned here. But as far as updating all the 351 files im not sure I follow. I got the baseband and update file from Manii's index, and I only downloaded the amss, recovery and update files. Should I have downloaded all other files as well? Brings me to another question in regards to qdl tool. In the images folder many of the other file types are listed there. Is this the folder the qdl.exe references? Meaning can I just replace all the files and then run the tool to get to a certain build?
Sent from my Dell Streak using XDA Premium App
valest said:
We've discussed this problem befored,the streak's screen is sensitive to heat,humidity(sweat,namely),and electric field.Keep your screen from all these things helps a lot.And recalibration is recommended if problem persist.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Yup this is a good piece of advice.Another good advice is.....sell it asap,I am also tired of the Streak just because of the stupid sensitive screen.I can't unlock it sometimes.What if I need it in emergency case?
Works for me,I think the streak's screen is good enough as long as you know how to maintain.Probably becuz I had a EVEN WORSE experience with nook color
Sent from my Dell Streak using XDA App
valest said:
Works for me,I think the streak's screen is good enough as long as you know how to maintain.Probably becuz I had a EVEN WORSE experience with nook color
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
What happen to your nook?
Have you tried a screen recalibration. It should ne done after any rom update. This solved my screen issues.
Sent from my Dell Streak using XDA App
keithdphan said:
Have you tried a screen recalibration. It should ne done after any rom update. This solved my screen issues.
Click to expand...
Click to collapse
HOw do you do the screen calibration? I know its in the fastboot screen but it just has a keypad. What exactly are you supposed to do?
I have problem with the screen, whenever my finger sweats, the screen goes haywire. Any solution on this.
Sent from my MB860 using Tapatalk
Capacitive touch screens detect anything that is conductive so it will register water/sweat/kool-aid. You just have to keep your fingers dry.
rsliew said:
I have problem with the screen, whenever my finger sweats, the screen goes haywire. Any solution on this.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
But I have been using phones like, galaxy s, s2, milestone, milestone 2, and some other phones. I have this kind of problem when using x10 and atrix only.
Sent from my MB860 using Tapatalk
I think it's more of a software thing, Motorola uses some sort of "liquid detection" (or something like that) on their phones which pretty much causes issues. Add that with the "multi-touch" bug the Atrix has then it just becomes a big mess. The Atrix will register moisture on the screen as a "touch" and then if it stays like that for 10 or 12 seconds then the screen goes bonkers.
http://forum.xda-developers.com/showthread.php?t=1000583
rsliew said:
But I have been using phones like, galaxy s, s2, milestone, milestone 2, and some other phones. I have this kind of problem when using x10 and atrix only.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Well my situation isn't related to wet fingers or moisture.
I don't think it is a matter of software bug either as its always the exact same area.
My last test was to use the Touch Test app and when I run my finger across the screen and it detects touch all the way across except a vertical strip from top to bottom. For instancr I can't use letters w, e, s, z when in portrait mode.
Sent from my MB860 using XDA App
sgs touch screen booster on market and select super optimized for decrease the sensibility oficial screen help in case of water or dirt
My brand new pad has a pixel that won't show green...running one of the apps that says it fixes that... If it doesn't work, i'm going to see if I can get a replacement.
Just a warning to everyone. Be on the lookout.
Sent from my SGH-T989 using XDA
I've got a dead pixel as well. Near the top left. Doesn't really bother me that much, so I don't really care. Surely one teeny little pixel doesn't warrant you returning it ...?
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Jarm3r said:
I've got a dead pixel as well. Near the top left. Doesn't really bother me that much, so I don't really care. Surely one teeny little pixel doesn't warrant you returning it ...?
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
I used to think that. But if its been like, 3 Weeks and there's already one dead pixel... What does that say for the possibilities?
Just called Asus - he tried to get me to do a wipe.
Are you kidding me? wipe all my data? Asus - get rid of the spiel, its junk. Get ppl who know whats up on the phones ugh
Sent from my SGH-T989 using XDA
My first pad had a dead pixel. I found it the second day and returned it as soon as I could. It was kind of in the middle of the screen, and I could see it every time I viewed a white web page. Needless to say, it bothered the heck out of me and had to be returned.
i went through 4 tabs until i got one that was fine display wise. first one had a cluster of discolored pixels, like someone pressed their thumb hard on the screen and damaged the area. the other two each had a couple grains of what looked like sand under the glass. All of these were around the same area on the tab, mid-lower left area of the screen.
Mines mid high right...
I'm worried about an attempted unlocking... I tried to unlock my tab before they fixed the c4okt issues, and im wondering if it might've sent them a file about that... Also wondering if unlocking will void it for a screen issue.
Sent from my SGH-T989 using XDA
Dead and stuck pixels are far from unique to Asus. There is a difference by the way, a stuck pixel is one that is, well stuck displaying one color, these can sometimes be fixed by programs like you are running and/or gently massaging the area with a pencil eraser or something similar, dead pixels don't display any color and are rarely able to be fixed.
californiarailroader said:
Dead and stuck pixels are far from unique to Asus. There is a difference by the way, a stuck pixel is one that is, well stuck displaying one color, these can sometimes be fixed by programs like you are running and/or gently massaging the area with a pencil eraser or something similar, dead pixels don't display any color and are rarely able to be fixed.
Click to expand...
Click to collapse
However, mine is stuck playing not green. every other color works
Sent from my SGH-T989 using XDA
As Kermit the Frog used to say It ain't easy being green
Lol... Honestly that made my morning
Sent from my SGH-T989 using XDA
My dead pixel I guess just happens to be in a place where I rarely notice it. I tried one of those dead pixel detect and fix apps but it didn't fix anything.
Sent from my Galaxy Nexus using xda premium
Jarm3r said:
My dead pixel I guess just happens to be in a place where I rarely notice it. I tried one of those dead pixel detect and fix apps but it didn't fix anything.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
There is one other thing you can try, VERY gently massage the dead pixel with a something like a pencil eraser, that will sometimes get it working.
californiarailroader said:
There is one other thing you can try, VERY gently massage the dead pixel with a something like a pencil eraser, that will sometimes get it working.
Click to expand...
Click to collapse
Don't see how this helps since its covered by a sheet of glass?
Sent from my SGH-T989 using XDA
new ion? said:
Don't see how this helps since its covered by a sheet of glass?
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
http://www.wikihow.com/Fix-a-Stuck-Pixel-on-an-LCD-Monitor
californiarailroader said:
http://www.wikihow.com/Fix-a-Stuck-Pixel-on-an-LCD-Monitor
Click to expand...
Click to collapse
That's fine and all... but there's a much thicker layer of glass over a capacitive screen than there is over a resistive touch screen... or just a LCD monitor.
Unless I'm missing something here, this advice does not apply anymore.
Sent from my SGH-T989 using XDA
new ion? said:
That's fine and all... but there's a much thicker layer of glass over a capacitive screen than there is over a resistive touch screen... or just a LCD monitor.
Unless I'm missing something here, this advice does not apply anymore.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
The screen will still flex. I am not sure whether it would work or not on these devices, I just put that out there hoping it might help.
californiarailroader said:
The screen will still flex. I am not sure whether it would work or not on these devices, I just put that out there hoping it might help.
Click to expand...
Click to collapse
Well thank you. I will give it a go.
Sent from my SGH-T989 using XDA
Don't feel too bad. I just made the mistake of looking at an all black screen on my Acer a510.
NINE stuck pixels!
One little cluster made a shape exactly like the big dipper. Very artistic, with pretty multicolored stuck-pixel stars.
Needless to say I wasn't thrilled. So much for quality control. Sounds like Asus at least isn't this bad.
Hey All,
I was reading the user manual for the S4 (Link), and it said on page 8 "Do not use a screen protector. This causes sensor malfunctions".
If I didn't look online for the manual, I wouldn't have known this information, as I didn't get the manual with my phone. (Only the quick start guides).
What is everyone opinion on this?
victorlht88 said:
I don't think the sensor will be affected if the screen protectors are well cut at the right areas.
Click to expand...
Click to collapse
Which areas?
They probably be cut around sensors at the top.
Sent from my HTC One using xda app-developers app
I'd assume that it's because of the floating touch. Being an owner of the Note 2 (that has floating touch with the S-Pen) I can tell you that a screen protector doesn't affect my experience.
Now if the S4 uses a different way of capturing floating touch (because it doesn't have a stylus), this may be true. I suppose only time and testing will tell.
Sent from my SGH-T889 using xda premium
i'm still going to use screen protectors.
I have screen protector. I got it with the phone when preordered. Its cut around the home button and cut just before sensors at top. All works fine.
Sent from my GT-I9505 using xda app-developers app
JustSueMe said:
I have screen protector. I got it with the phone when preordered. Its cut around the home button and cut just before sensors at top. All works fine.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Does the floating touch thing work?
Hey, i too have the screen protector, everything including floating touch working alright
JihadSquad said:
Does the floating touch thing work?
Click to expand...
Click to collapse
....
all working
Get a screen protector and a case if you don't want to scratch your phone, that way you can sell it in an "excellent" condition. I had my GS3 for 8 months and it's still in pristine condition.
I have had a screen protector on since day one with no malfunctions. Also, you will notice that protectors designed for the S4 don't cover the sensors at the top of the phone.
Sent from my GT-I9505 using xda app-developers app
It makes the floating touch slightly less sensitive (and accurate at longer distances), but other than that it's fine.
I have a screen protector on my s4 and have no issues
I also used screen protector from day 1, no problem.
had one no change btw after accident not ahve one now btw think may nto go to bu one what do u think? buy one:?!
ste1164 said:
They probably be cut around sensors at the top.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
yea u r corect plus i use ones no any effect
Has anyone noticed that the screen on this phone is way too sensitive? Mine goes as far as to register a touch when I hold my finger a few millimeters away. This results in accidental double presses and is very frustrating especially when typing. I even made sure the high sensitivity setting was off.
When in Camera mode, it even snaps photos by itself without my finger anywhere near the shutter button.
Any tips?
Sent from my SAMSUNG-SGH-I337 using xda premium
Nobody else with this issue? I'm debating whether to exchange this phone for another s4 or just trade it for an HTC one at this point.
Sent from my SAMSUNG-SGH-I337 using xda premium
makks said:
Nobody else with this issue? I'm debating whether to exchange this phone for another s4 or just trade it for an HTC one at this point.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Have you tried turning off AirView?
There is a mode you need to turn off which makes it more sensitive. For winter and gloves.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Use voice in camera like: SHOOT
netsyd said:
Have you tried turning off AirView?
Click to expand...
Click to collapse
Turned off air view and all other superfluous Samsung gimmicks.
Sent from my SAMSUNG-SGH-I337 using xda premium
I'm not having that problem. If you like the phone, warranty it out. That's not normal.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Could your setting "high touch sensitivity" under display settings be turned on? Also for the camera, could it be you are saying things similar to cheese or smile or shoot?
Sent from my SGH-I337M
enigma4321 said:
Could your setting "high touch sensitivity" under display settings be turned on? Also for the camera, could it be you are saying things similar to cheese or smile or shoot?
Sent from my SGH-I337M
Click to expand...
Click to collapse
As stated in OP I had made sure that the hi sensitivity option is off as well as any other convenience features.
As for the camera, I have been in windy conditions when this was occurring, so maybe it was thinking I was giving voice commands. But I had all of that turned off as well, so I'm not sure what the deal is.
I will probably revert to factory settings again before returning the phone to make sure it's not a software issue.
I think that Samsung went a little overboard with the touchscreen on this phone. I do not like the fact that everything can be used to touch the screen. What I actually liked about my iPhone 4s was that it was picky about only recognizing fingertip touches.
Great phone overall but this issue sadly ruins it for me. I do not want to go back to iOS so I think HTC One is the only other strong competitor.
Sent from my SAMSUNG-SGH-I337 using xda premium
makks said:
As stated in OP I had made sure that the hi sensitivity option is off as well as any other convenience features.
As for the camera, I have been in windy conditions when this was occurring, so maybe it was thinking I was giving voice commands. But I had all of that turned off as well, so I'm not sure what the deal is.
I will probably revert to factory settings again before returning the phone to make sure it's not a software issue.
I think that Samsung went a little overboard with the touchscreen on this phone. I do not like the fact that everything can be used to touch the screen. What I actually liked about my iPhone 4s was that it was picky about only recognizing fingertip touches.
Great phone overall but this issue sadly ruins it for me. I do not want to go back to iOS so I think HTC One is the only other strong competitor.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I am having the same problem as you. I can type without actually touching the screen. Now that I know it isn't normal, I guess I'll swap it for a new one...