[q] s4 - do not use a screen protector - Galaxy S 4 Q&A, Help & Troubleshooting

Hey All,
I was reading the user manual for the S4 (Link), and it said on page 8 "Do not use a screen protector. This causes sensor malfunctions".
If I didn't look online for the manual, I wouldn't have known this information, as I didn't get the manual with my phone. (Only the quick start guides).
What is everyone opinion on this?

victorlht88 said:
I don't think the sensor will be affected if the screen protectors are well cut at the right areas.
Click to expand...
Click to collapse
Which areas?

They probably be cut around sensors at the top.
Sent from my HTC One using xda app-developers app

I'd assume that it's because of the floating touch. Being an owner of the Note 2 (that has floating touch with the S-Pen) I can tell you that a screen protector doesn't affect my experience.
Now if the S4 uses a different way of capturing floating touch (because it doesn't have a stylus), this may be true. I suppose only time and testing will tell.
Sent from my SGH-T889 using xda premium

i'm still going to use screen protectors.

I have screen protector. I got it with the phone when preordered. Its cut around the home button and cut just before sensors at top. All works fine.
Sent from my GT-I9505 using xda app-developers app

JustSueMe said:
I have screen protector. I got it with the phone when preordered. Its cut around the home button and cut just before sensors at top. All works fine.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Does the floating touch thing work?

Hey, i too have the screen protector, everything including floating touch working alright

JihadSquad said:
Does the floating touch thing work?
Click to expand...
Click to collapse
....
all working

Get a screen protector and a case if you don't want to scratch your phone, that way you can sell it in an "excellent" condition. I had my GS3 for 8 months and it's still in pristine condition.

I have had a screen protector on since day one with no malfunctions. Also, you will notice that protectors designed for the S4 don't cover the sensors at the top of the phone.
Sent from my GT-I9505 using xda app-developers app

It makes the floating touch slightly less sensitive (and accurate at longer distances), but other than that it's fine.

I have a screen protector on my s4 and have no issues

I also used screen protector from day 1, no problem.

had one no change btw after accident not ahve one now btw think may nto go to bu one what do u think? buy one:?!

ste1164 said:
They probably be cut around sensors at the top.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
yea u r corect plus i use ones no any effect

Related

Screen coating abrasion

Has anyone noticed the screen coating abrasion on the most used area of the screen? In my case right lower part as I am right handed. It is not very obvious but when you look at it with the help of ambient light reflection you notice it.
Sent from my Desire HD using XDA App
Nope no abrasion here but then again i'm using an screenprotector
Sent from my Desire HD using XDA App
selocan11 said:
Has anyone noticed the screen coating abrasion on the most used area of the screen? In my case right lower part as I am right handed. It is not very obvious but when you look at it with the help of ambient light reflection you notice it.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
same here.. no abrasion on my DHD, i am using a screen protector as well.. i think its time you should get 1 as well...
+1 for the screen protectors, ill be fitting mine in a day or so
Have you tried a really good cleaner? might just be crud stuck to the screen from day to day use,, used to get it on my iPhone but usually 'wiped' clean
Good cleaner doesnt solve the case.I guess mine has a production defect then. Kind of defective thinner coating. I will return to HTC for replacement. Lets see how will they react.
Sent from my Desire HD using XDA App
my DHD never comes out of its otterbox so no problems here

Nexus 4 stylus?

Anyone using a stylus know of a good brand to get?
Sent from my Nexus 4 using xda premium
Adonit ajot idk If I spelled it right, but it has a clear disk for accurate drawing/writing.
Sent from my Nexus 4 using xda app-developers app
Yeah, that tip looks really awkward, lol.
Sent from my Nexus 4 using xda premium
kyleds said:
Yeah, that tip looks really awkward, lol.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
It's not awkward at all. I used to sell them and they work really well.
Sent from my... wait, I can't remember what device or ROM I'm running anymore!
The Jot. I have been using one for a few months now and haven't had a problem. I mostly use it on my tablets but I'm sure they will work fine.
Sent from my Nexus 4 using xda app-developers app
i waas searching for a good stylus today with a fine tip (not big round black tipped ones) and i came across jot. I read some reviews and watched videos and it looked really cool but there is a downside unfortunately. It does not work with certain screen protectors as indicated on website including zagg, ghost armor and skinomi. I installed skinomi on my nexus and appearently i am not able to use jot any ideas for a good stylus? i have seen wacom bamboo is good but it does not have fine tip unfortunately
sert89 said:
i waas searching for a good stylus today with a fine tip (not big round black tipped ones) and i came across jot. I read some reviews and watched videos and it looked really cool but there is a downside unfortunately. It does not work with certain screen protectors as indicated on website including zagg, ghost armor and skinomi. I installed skinomi on my nexus and appearently i am not able to use jot any ideas for a good stylus? i have seen wacom bamboo is good but it does not have fine tip unfortunately
Click to expand...
Click to collapse
are they compatible with XO skins?
is out there any stylus compatible with option " Show icon when using stylus" ? I dont want just any stylus it would be nice to have stylus that can use phone even tho its not touching my screen

Xtreme guard screen protector

Hi
Has any one use this screen protector?
I was about to buy it buy i noticed it did not have a front sensor opening, it only has one for camera.
Problem is i bought one before that covered the sensor and once a call came in the screen would not turn back on when i finished the call.
So please if any one has some experience with this one please share with me your experience. Thanks
Here is a video review by ctscloud, thank him. link below.
http://www.youtube.com/watch?v=2xtQSX0-6hc&feature=player_embedded
Sent from my Nexus 10 using xda app-developers app
If i remember correctly my last phone had one of those on it for a while, and it had that awful screen door effect.It wasn't really noticeable on color but when you had a white background it could really drive you nuts. I ended up peeling it off in the end because it got on my nerves so bad when looking at web pages.Spend the extra cash and get a quality one. (XOskins, Skinomi, BSE, etc)
What is a "screen door" effect?
I ordered an XtremeGuard but haven't received it yet.
elzafir said:
What is a "screen door" effect?
I ordered an XtremeGuard but haven't received it yet.
Click to expand...
Click to collapse
But basically you can see like little squares in the phone screen like a screen door.
You see the fine line separating the pixels.
Sent from my Nexus 10 using xda app-developers app
elzafir said:
What is a "screen door" effect?
I ordered an XtremeGuard but haven't received it yet.
Click to expand...
Click to collapse
And i had the same experience with them before, but i changed address hope it does not happen this time...
Sent from my Nexus 10 using xda app-developers app
I just received it. I didn't install it yet, but I can confirm it has all the cuts needed: front camera, sensors, etc.
Here is a picture of it.
(click for full size)
JanusDC said:
I just received it. I didn't install it yet, but I can confirm it has all the cuts needed: front camera, sensors, etc.
Here is a picture of it.
(click for full size)
Click to expand...
Click to collapse
Thanks for the pik bro. Let me know how it turns out. If u get screen effect.
Sent from my Nexus 4 using xda app-developers app
I bought a series of them, but they are the most disappointing screen protectors ever. I'm quite experienced in applying screen protectors and didn't have any trouble applying these protectors, but every single time the top left corner detached from the screen after ~2 weeks. Furthermore: the feel is extremely "plasticcy", and after removing the protectors I noticed that the screen gets a lot less responsive to touch when they're on.
My advice: stay away from the Xtreme guard protectors!
I just installed it last night. I don't like it. Finger don't slide smoothly, kind of sticking to the screen.
Fit is pretty good, and its matte finish. But I can't use it, feels no good.
i have no problems with mine. All of the cuts are perfect and it looks clean imo. I got the full coverage for 3 bucks during a special 70% off sale.
though they are cheap you don't get much but just the screens in the mail. (You get what you paid for)
what i did to install it was i had left over Zagg solution from a previous phone and applied it to the screen.
then i used a hair blow dryer while using a squeegee to remove all the water from under the screen.
orphan22 said:
Thanks for the pik bro. Let me know how it turns out. If u get screen effect.
Click to expand...
Click to collapse
I installed it last night. Just after installed, it got an incredible orange peel effect, however in the instructions it says to wait at least 8hs dry before turning the phone on. So I led it off all the night and this morning most of that effect disappeared. It still has some bubbles (not with air, I think is water, is what caused the orange peel effect before, just that now they are far from each other). So, I will wait until tomorrow to see if this disappear before writing a verdict. If these bubbles do not disappear, I'm afraid I'll have to remove it.
The responsiveness of the screen didn't change.
The plasticity fell I guess will also disappear when the remaining bubbles disappear.
I'll keep you posted.
Sent from my Nexus 4 using xda app-developers app
I've used these xtremeguards on my previous phones because they were cheap but I was never satisfied with them...meh
Bought the body kit that gives sp for the front and back and after a week I decided to go back to skinomi.
Looks like everyone has had trouble with them. Ill wait for his verdict and make my decision... Any ways thanks every one.
Sent from my Nexus 4 using xda app-developers app
Can anyone give me a website to buy a good one? I tried ebay but i can not find the good brands everyone been telling me to get. I wanna check then out.
Sent from my Nexus 4 using xda app-developers app
I've had mine on my n4 for about a week now. You can't even tell that there's a screen protector on it just by looking. It basically looks perfect. However I will say that it definitely feels weird.
Sent from my Nexus 4 using xda app-developers app
Wait, I didn't know that XtremeGuard was a wet application screen protector. Is this true?
Sent from my Nexus 4 pimped with AOKP and Franco.kernel
elzafir said:
Wait, I didn't know that XtremeGuard was a wet application screen protector. Is this true?
Sent from my Nexus 4 pimped with AOKP and Franco.kernel
Click to expand...
Click to collapse
Yes, it is a wet application.
Sent from my Nexus 10 using xda app-developers app
Just to keep you posted. After 24hs of having applied the protectors, the back one is almost perfect, with only 2 or 3 bubbles here and there, but they aren't too noticeable. The front protector have some more bubbles but definitely less than this morning.
The feeling is really plastic.
Overall, I think this will protect the screen, but it isn't good looking. I think I will keep it until I get the flip leather case that I ordered, then I will remove the front one (the one at the back doesn't bother me at all, so I'll keep that).
Will see, maybe for the time when I receive the case I already get used to it. :/
Sent from my Nexus 4 using xda app-developers app
JanusDC said:
Just to keep you posted. After 24hs of having applied the protectors, the back one is almost perfect, with only 2 or 3 bubbles here and there, but they aren't too noticeable. The front protector have some more bobbles but definitely less than this morning.
The feeling is really plastic.
Overall, I think this will protect the screen, but it isn't good looking. I think I will keep it until I get the flip leather case that I ordered, then I will remove the front one (the one at the back doesn't bother me at all, so I'll keep that).
Will see, maybe for the time when I receive the case I already get used to it. :/
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks for all your updates bro. I just bought one today to try it. Hope it works. Any ways good luck hope all the bubbles go away.
Sent from my Nexus 4 using xda app-developers app

S4 and Otterbox

Anyone have strange issues with airview and cases?
I normally wouldn't use a screen protector but one came with the Otterbox commuter so I used it.
My airview seems to jump around with the case and screen protector.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
xisruno said:
Anyone have strange issues with airview and cases?
I normally wouldn't use a screen protector but one came with the Otterbox commuter so I used it.
My airview seems to jump around with the case and screen protector.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
I have no problems with mine, using the same setup as you.
FourPointedFreak said:
I have no problems with mine, using the same setup as you.
Click to expand...
Click to collapse
errr if I take the case off airview works fine......very strange issue
xisruno said:
errr if I take the case off airview works fine......very strange issue
Click to expand...
Click to collapse
Perhaps part of the case is sticking down to the screen protector covering the screen somewhere. Sounds to me like there is a section of the screen being held down and when you attempt to use the feature, it jolts and jumps around not knowing where you want it to move.
I noticed this issue with a couple of cases on my friends. I think it is the cover near the sensors. What they did was remove the screen protector near sensors area and widen up the sensor area if your case covers it.
Sent from my GT-I9505G using Tapatalk 2
Ya I may take the screen protector off. Don't really need it just need the protection from dropping it
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
I think it may have been the screen protector as I have removed it and works great now.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4

Samsung Gave ME FAKE Gorilla Glass ? [PICTURES][

What do u think by seeing this glass ?
i have bought brand new Galaxy S5 and this is the result. i think samsung provided me fake gorila glass?
What exactly are we looking at? The yellow tint that is your screen
I believe the OP is talking about the scratch at the mid - bottom of the screen, or what?
Sent from my SM-G900F using XDA Free mobile app
Doesn't look like a professional finish at all
iliadis_babis said:
I believe the OP is talking about the scratch at the mid - bottom of the screen, or what?
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
i am tlaking about botton and upside ( not middle , no problm in middle that is just fringer print ) but do you see yellow tint like foggy and also coating fade away littile ?
Yes I do, had kind of the same thing at my i9305. Seems weird but has no impact. If it bothers you you can always take it back
Sent from my SM-G900F using XDA Free mobile app
it really bothers me it looks so ugly
baught new phone happily and this is the result.
I have one year warranty of Jarir Qatar but problem is i am in india , i am not going there anymore.
let me see anyway to reach them else i will replace the screen by paying money in india itself
because i really feel some problem with this glass.
Can't you take it direct to Samsung?
tbh that looks more like a badly applied screen shield
-PiLoT- said:
tbh that looks more like a badly applied screen shield
Click to expand...
Click to collapse
I agree.
Sent from my SM-G900F using Tapatalk
Yeah you should take it back sir.
Sent from my SM-G900T using Tapatalk
Definitely looks like the screen protector is causing it. Can you remove the screen protector and see if that removes the tint?
Sent from my SM-G900V using XDA Premium 4 mobile app
I believe he doesn't have a protector on...
Sent from my SM-G900F using XDA Free mobile app
Looks like a protector is on. You should remove it and check.
Indeed. It's just the factory applied protector is coming away isn't it? Hard to tell from those pics with all the reflection. Down on a flat table would have been easier to see
Sent from my SM-G900F using Tapatalk
There is definately a screen protector applied, just look near the sensors around the screen you can see the parts where thers is air under the protector :silly::silly:
gee2012 said:
There is definately a screen protector applied, just look near the sensors around the screen you can see the parts where thers is air under the protector :silly::silly:
Click to expand...
Click to collapse
I think the same
Sent from my SM-G900F using XDA Premium 4 mobile app
*elmo* said:
I think the same
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No brother , I have not put any screen protector.
that is not bubble , that is coating fade away .
So sad I have got manufacturer defected phone.
It REALLY looks like some kind of protective film. Are you sure it's not? I've never heard of "coating fading away" before.
Sent from my SM-G900F using Tapatalk
I do not see anything remotely looking like a screen protector or anything like that, that said, it is just an unfortunate production malfunction which can always happen and so obvious you don't have to worry about it and can just return it to get a replacement. I do not really see the need for a whole thread on such a problem.
Would I feel bummed out about it, of course, but these things happen and are easily solved. Thread closed?

Categories

Resources