I can't do anything, it's freezed and whenever i go out of it, i get the sign of connecting to computer.
Also when i try to install any ROM, it just freezes in download mode, what can i do?
pull battery out for 10 sec already done?
corgar said:
pull battery out for 10 sec already done?
Click to expand...
Click to collapse
Done already, thanks for answering so quickly
It freezes after doing this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
Try searching the q & a section of the forum. That should have been your first port of call.
Dan
try to check if any instance of kies is running in bg
Download Odin3 1.7 and try to flash a stock JM8 firmware with 512 pit re-partitioned. Don't worry, the Phone ! PC isn't a total brick. This happened to me and this should work for you.
corgar said:
try to check if any instance of kies is running in bg
Click to expand...
Click to collapse
There is one... now i've closed it, what now?
Bess833 said:
Download Odin3 1.7 and try to flash a stock JM8 firmware with 512 pit re-partitioned. Don't worry, the Phone ! PC isn't a total brick. This happened to me and this should work for you.
Click to expand...
Click to collapse
Ok, i'm gonna try to.
Run odin as an administrator and also wrong section.
jaju123 said:
Run odin as an administrator and also wrong section.
Click to expand...
Click to collapse
Sorry man, it's just im so nervous i don't know what to do, sorry
coldflid said:
There is one... now i've closed it, what now?
Click to expand...
Click to collapse
try using odin 1.3 and not 1.7
first of all, take out the simcard and the ext sd-card.
turn off the kies (dont let it run in the tray)
start odin and put all the needed files in
start the phone in download mode and connect it to the computer.
start the rom burning.
coldflid said:
Sorry man, it's just im so nervous i don't know what to do, sorry
Click to expand...
Click to collapse
Don't worry, keep your calm. Your phone is not a total brick, it's almost impossible. With Odin3 v1.7 and JM8 + 512 pit, you should be up and running in no time.
As long as you are able to get to Download mode, you can keep calm. Don't worry
genich1971 said:
try using odin 1.3 and not 1.7
Click to expand...
Click to collapse
Odin 1.7 > Odin 1.3 when it comes to unbricking in my experience.
close kies process and try to reflash again
Bess833 said:
Don't worry, keep your calm. Your phone is not a total brick, it's almost impossible. With Odin3 v1.7 and JM8 + 512 pit, you should be up and running in no time.
As long as you are able to get to Download mode, you can keep calm. Don't worry
Odin 1.7 > Odin 1.3 when it comes to unbricking in my experience.
Click to expand...
Click to collapse
I've tried with 1.3 only, gonna try 1.7
Btw, someone has the link to the JM8, i can't download it from samfirmwares, doesn't let me.
coldflid said:
I've tried with 1.3 only, gonna try 1.7
Btw, someone has the link to the JM8, i can't download it from samfirmwares, doesn't let me.
Click to expand...
Click to collapse
[ROM] Release: I9000XWJM9 - MultiCSC(s) Europe
JM9 should do the trick too.
Thanks everyone, seems its working alright now.
You're great man, i didn't think i would manage to do it.
Btw, Odin 3 1.7 unbricks better than 1.3 for what i've seen
coldflid said:
Thanks everyone, seems its working alright now.
You're great man, i didn't think i would manage to do it.
Btw, Odin 3 1.7 unbricks better than 1.3 for what i've seen
Click to expand...
Click to collapse
Indeed and gratz. Now you can go ahead and flash any ROM/Firmware you want again.
coldflid said:
Thanks everyone, seems its working alright now.
You're great man, i didn't think i would manage to do it.
Btw, Odin 3 1.7 unbricks better than 1.3 for what i've seen
Click to expand...
Click to collapse
Actually, when i booted first time i get an error in recvovery saying:
multicsc
can not acces to /system/csc/XEE/system/.
Guess it's an error of CSC, can someone give me the link to a working one ?
coldflid said:
Actually, when i booted first time i get an error in recvovery saying:
multicsc
can not acces to /system/csc/XEE/system/.
Guess it's an error of CSC, can someone give me the link to a working one ?
Click to expand...
Click to collapse
Where are you from and what CSC you used?
coldflid said:
Actually, when i booted first time i get an error in recvovery saying:
multicsc
can not acces to /system/csc/XEE/system/.
Guess it's an error of CSC, can someone give me the link to a working one ?
Click to expand...
Click to collapse
I correct myself again. Indeed, it was an error in the CSC, i just tried using Odin v3 1.7 and the JPU rom and for now it seems it's working it's way through. I'll edit when it finishes to tell you the result.
Thanks again
Now it's working just fine.
Thanks a lot
Related
After I finally got back into recovery from a flash that did not work like it was supposed to I restored the backup I had made and now all I get is the first screen
Vibrant
Samsung
I fouled up bad I am sure... have the phone less that 48 hours and I think i bricked it... What can I do now to get this thing back to factory so I can start over and hopefully not mess up this time?
I assume you went from froyo, to an eclair backup.
You will need to ODIN back. This can be found in the Dev Section Bible.
Once you ODIN back to stock JFD.... once you are on JFD, you can follow the steps in my noob guide to get on a custom rom correctly.
Hope it helps.
Good news is: You did NOT brick your phone, you got it stuck in a boot loop, something did not match from what was on it and whatever you flashed.
Here is a good way to get back to stock and start over, let me know if you make it OK.
Link: http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
Good luck, just follow carefully and will be smooth and easy.
OK, So I finally got the phone to go to Download mode and I have odin, but before I make it worse. which files do I need and/or which specific thread will walk me through Odin. I found this site while waiting for a response *hope posting outside link is not against rules* http://factoidz.com/how-to-use-odin-to-flash-your-samsung-galaxy-s/
Ok i Brickeedd Mines Too yesterday...because i lik to do thinqs and learn more and moree...i juxx learnedd how to fix it.....if yuh brickdd it.....gett dhe odin shyt on your computer aloq with all the files that it needs....afta yuh got the files...........make sure yuh fone is of......
1...hold volume up and volume down>>both a the same time
2....conect the USB Cablee.....yuhhh now in download mode.....so go to odin and yuh should know what to do....
remember jusst preess volume up and volume down....dont preess power...
the pit and tar files in the link from androidspin are what you want. Not sure what version of ODIN they are using, but you want to make sure it's the latest ODIN version. I placed a link to it in the noob guide just in case. You can try with the version you have, just know if it hangs up, get the newest version.
caliga4221 said:
OK, So I finally got the phone to go to Download mode and I have odin, but before I make it worse. which files do I need and/or which specific thread will walk me through Odin. I found this site while waiting for a response *hope posting outside link is not against rules* http://factoidz.com/how-to-use-odin-to-flash-your-samsung-galaxy-s/
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=849028 should be everything there you need to odin back.
Great, I am downloading the tar file they linked now and the version of odin i got was i think from your thread it says 1.7 when its open.
Right now I have it open and it sees the phone. I have the pit file selected just waiting on tar to finish .. abut 30% done on this crappy free wifi my town provides.
caliga4221 said:
Great, I am downloading the tar file they linked now and the version of odin i got was i think from your thread it says 1.7 when its open.
Right now I have it open and it sees the phone. I have the pit file selected just waiting on tar to finish .. abut 30% done on this crappy free wifi my town provides.
Click to expand...
Click to collapse
make sure you uncheck the checkbox "RE-PARTITION" before you start...............................................................................................
Actually, I would not touch those buttons.
OK, all files finished and I followed the steps on AndroidSPIN but now I have conflicting instructions.
Guide says only use * Auto Reboot and * F. Reset Time
s15274n said use Re-Partition too... So this is what I have so far but Im not clicking anything till I verify It looks right to be sure I dont foul it up more.
Edit: wow pic came out so small its hard to see , here is link to raw img
http://oi53.tinypic.com/1zbb18o.jpg
according to your picture everything is good just hit start and you should be good.
caliga4221 said:
OK, all files finished and I followed the steps on AndroidSPIN but now I have conflicting instructions.
Guide says only use * Auto Reboot and * F. Reset Time
s15274n said use Re-Partition too... So this is what I have so far but Im not clicking anything till I verify It looks right to be sure I dont foul it up more.
Edit: wow pic came out so small its hard to see , here is link to raw img
http://oi53.tinypic.com/1zbb18o.jpg
Click to expand...
Click to collapse
I have used the Odin that came from Androspin and that is why I screamed to uncheck the third checkbox "re-partition" because for some reason the first time you start it, it is checked. STRICTLY: use only the two check boxes the guide mentions, if not you'll have issues as others have experience.
So it has been sitting for almost 15 min saying the same thing
<ID:0/005> Added!!
<ID:0/005> Odin v.3 enging (ID:5)..
<ID:0/005> File Analysis..
<ID:0/005> SetupConnection..
Thats it, thats as far as it goes. I dont know what to do, Task Manager shows the Process and Application active but with 0% activity and around 6600k memory use steady.
caliga4221 said:
So it has been sitting for almost 15 min saying the same thing
<ID:0/005> Added!!
<ID:0/005> Odin v.3 enging (ID:5)..
<ID:0/005> File Analysis..
<ID:0/005> SetupConnection..
Thats it, thats as far as it goes. I dont know what to do, Task Manager shows the Process and Application active but with 0% activity and around 6600k memory use steady.
Click to expand...
Click to collapse
did you uncheck re-partition before start?
yes.
I found another site where it said that you just had to put the phone back into download mode that sometimes when that happens its because something didnt connect right. I did that , closed odin with task manager, took out the battery and restarted the process. this time it worked. it looks like im back on stock again, at least it all looks right and seems to work. I was able to redownload all my apps, just have to start over from scratch.
My question now is where do I find the stock 2.2 update. Maybe it would be better to get to 2.2 stock before I start messing around with 2.2 roms and stuff again.
No, don’t go to stock Froyo. It's full of bugs and is a nightmare. Let me get back to my computer and i'll show you where to go.
Sent from my SGH-T959 using XDA App
roumenjr said:
No, don’t go to stock Froyo. It's full of bugs and is a nightmare. Let me get back to my computer and i'll show you where to go.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
OK, ty. If I have learned anything it is to be patient and wait on the experts when they say wait. Look forward to the info.
Go here first and root your phone, super easy:
http://forum.xda-developers.com/showthread.php?t=803682
roumenjr said:
Go here first and root your phone, super easy:
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Done. Opened TI Backup and confirmed it asked for root rights and got them.
Well I rooted my device a few months back - installed lagfix and it was working fine for months.
I am quite illiterate about these things but ive read and tried my best to understand enough to root my device.
I wanted to extend my battery life and I read that darky's mod could do the trick.
So I installed rom manager - clockworld - tried to flash darky's mod but it didn't work.. Failed to verify sig error.. While doing this I figured I replaced my original froyo in clockworld back up. Because tonight I tried a feature on lagfix to end background processes - put it to strict - hoping it would improve my battery life, well after doing this my phone couldn't function properly. It kept re-booting over and over again - not shutting downing but the processes kept doing that. I can't even get into the settings area without the phone rebooting..
So naturally I restored it and to my surprise superuser is still installed!! with my factory apps...but the problem persisted!! ..now I get a keyboard error along with the rebooting..
I want to bring it to bell but superuser is installed on it which might make them void my warranty even what it takes to reach the apps takes alot of work..
One more thing, superuser can't be uninstalled after the factory reset and it's the only third party app that remained!!
I think I may have had the same problem before. Phone froze during a Nandroid restore, and when it booted up... FC central. However...
Read the RESCUE YOUR VIBRICK guide (in the sticky thread at the top). See if you can get into download mode through the methods listed there. From download mode you can flash a completely stock build. Just read through the guide there and if you run into any problems with Odin, you can ask questions in that thread.
You mention bell in your original post. If you are using a Bell Canada Vibrant, that phone is more like the GT-I9000 than the T-Mobile Vibrant. You might want to go to that section for help. Also, try ROMs and mods specifically for the GT-I9000. The ones for the US vibrant will probably not work on your phone.
What is the model number of your phone? Yes, the I9000 forum has way more support for bell users.
It sounds as if you'll need to use Odin and flash a clean stock version. Sometimes when flashing "ghosts" can be left behind and you'll end up with the problems you see. Post you model number and I'll see if I can't give you proper links to what you need to do a true factory restore and you probably wont have to take your phone anywhere.
Sent from my GT-I9000 using XDA Premium App
explodingboy70 said:
What is the model number of your phone? Yes, the I9000 forum has way more support for bell users.
It sounds as if you'll need to use Odin and flash a clean stock version. Sometimes when flashing "ghosts" can be left behind and you'll end up with the problems you see. Post you model number and I'll see if I can't give you proper links to what you need to do a true factory restore and you probably wont have to take your phone anywhere.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thanks to everyone who responded ... I am more hopeful now.
My model is GT-I9000M
explodingboy70 said:
What is the model number of your phone? Yes, the I9000 forum has way more support for bell users.
It sounds as if you'll need to use Odin and flash a clean stock version. Sometimes when flashing "ghosts" can be left behind and you'll end up with the problems you see. Post you model number and I'll see if I can't give you proper links to what you need to do a true factory restore and you probably wont have to take your phone anywhere.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
ExplodingBoy got the answer, you will need to odin back to stock>then root>then install RomManager and then get the correct rom designed for your phone and flash that .............then all will work beautifully.........good luck
Okay. You can get into download mode correct?
Then go here http://forum.xda-developers.com/showthread.php?t=1022445 and select no bootloaders. This is the latest firmware for your phone. Looks like the firmware is split into 3 files so you'll need to extract them to your computer then in ODIN select to corresponding file for the space indicated, you'll see and use the 512 pit where its needed.
If you need the proper ODIN files read on. Then go here http://hotfile.com/dl/107607762/640950b/I9003_Odin3_v1.82.rar.html to get the latest version of Odin. And then here http://forum.xda-developers.com/showthread.php?t=734475 and download the 512 pit file.
I would use the PIT512 option which will check the repartition automatically. This will give you the cleanest restore possible. All of your SD will remain intact (should), as a precaution if you have anything on your external sd that you want to save remove it. Be safe though and backup anything to your computer first.
If you need further help we can try the best we can here but you'll have a better time on the I9000 forums. Also check out http://forum.xda-developers.com/showthread.php?t=886158 for topics specific to I9000M.
Good luck.
explodingboy70 said:
Okay. You can get into download mode correct?
Then go here http://forum.xda-developers.com/showthread.php?t=1022445 and select no bootloaders. This is the latest firmware for your phone. Looks like the firmware is split into 3 files so you'll need to extract them to your computer then in ODIN select to corresponding file for the space indicated, you'll see and use the 512 pit where its needed.
If you need the proper ODIN files read on. Then go here http://hotfile.com/dl/107607762/640950b/I9003_Odin3_v1.82.rar.html to get the latest version of Odin. And then here http://forum.xda-developers.com/showthread.php?t=734475 and download the 512 pit file.
I would use the PIT512 option which will check the repartition automatically. This will give you the cleanest restore possible. All of your SD will remain intact (should), as a precaution if you have anything on your external sd that you want to save remove it. Be safe though and backup anything to your computer first.
If you need further help we can try the best we can here but you'll have a better time on the I9000 forums. Also check out http://forum.xda-developers.com/showthread.php?t=886158 for topics specific to I9000M.
Good luck.
Click to expand...
Click to collapse
WOW ... Thank you so much, let me go try these out. But firstly I think I can get into download mode ... so i'm going to try it with bootloader first...if that doesn't work then ill download the no bootloader file.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.rfs
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I got into download mode, loaded the rar file into odin -PDA selected and I got this error.
No rar. You want to extract files from the rar and put those three in there respective slots.
Sent from my GT-I9000 using XDA Premium App
Okay this time it's making some progress ...look like it's going to work now... YUP!! downloaded and it's restarting now
explodingboy70 said:
No rar. You want to extract files from the rar and put those three in there respective slots.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
OMG OMG OMG!! it worked like a charm!!
THANK YOU MAN ..really appreciate your help and everyone who chimed in.
Now I have the latest update, and now time to root it.
Whats the best way to root from here ? and id like to install darky's rom instead of the lagfix I had previously.
Head over to the I9000 forums and find out from there. Anything here is really meant for the T959 Vibrant. I'm not sure if Darkeys is good for you as its built on the international I9000. They'll be more help over there though.
Glad it worked out for you.
Sent from my GT-I9000 using XDA Premium App
explodingboy70 said:
Head over to the I9000 forums and find out from there. Anything here is really meant for the T959 Vibrant. I'm not sure if Darkeys is good for you as its built on the international I9000. They'll be more help over there though.
Glad it worked out for you.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Respect man, and have a good day.
Hi guys,
I had darky's rom on my phone and then i had to factory reset it. It was working fine after the factory reset. I wanted to go back to stock firmware since i was planning on taking my phone to the Bell store tomorrow but in doing so i bricked my phone. Now all it does is show the boot screen and then the screen turns black and it keeps on vibrating randomly.
Can anyone PLEASE help me with this? I wanna go back to stock firmware if possible, or any firmware really i just wanna get my phone working. please help
superstrongboy said:
Hi guys,
I had darky's rom on my phone and then i had to factory reset it. It was working fine after the factory reset. I wanted to go back to stock firmware since i was planning on taking my phone to the Bell store tomorrow but in doing so i bricked my phone. Now all it does is show the boot screen and then the screen turns black and it keeps on vibrating randomly.
Can anyone PLEASE help me with this? I wanna go back to stock firmware if possible, or any firmware really i just wanna get my phone working. please help
Click to expand...
Click to collapse
What version of darky's rom were you using and which stock firmware version did you want to go back to?
It could be that you were using a version of darky's rom that is gingerbread and you flashed back to the froyo stock rom.
superstrongboy said:
Hi guys,
I had darky's rom on my phone and then i had to factory reset it. It was working fine after the factory reset. I wanted to go back to stock firmware since i was planning on taking my phone to the Bell store tomorrow but in doing so i bricked my phone. Now all it does is show the boot screen and then the screen turns black and it keeps on vibrating randomly.
Can anyone PLEASE help me with this? I wanna go back to stock firmware if possible, or any firmware really i just wanna get my phone working. please help
Click to expand...
Click to collapse
Ok, try to turn on the phone pressing VOLUME DOWN+HOME+POWER and see if the phone goes in Download Mode.
Then, follow the guides that you can find in the forum and flash with ODIN a new ROM (I suggest JS8 if you're in EUROPE, Froyo 2.2.1)
Download Mode work ? 3 buttons holding Vol down+home+power
bobloblawsum said:
What version of darky's rom were you using and which stock firmware version did you want to go back to?
It could be that you were using a version of darky's rom that is gingerbread and you flashed back to the froyo stock rom.
Click to expand...
Click to collapse
I had darky's ressurection edition rom and i had it on froyo.
i want to go back to any firmware version that will get my phone working
olivercervera said:
Ok, try to turn on the phone pressing VOLUME DOWN+HOME+POWER and see if the phone goes in Download Mode.
Then, follow the guides that you can find in the forum and flash with ODIN a new ROM (I suggest JS8 if you're in EUROPE, Froyo 2.2.1)
Click to expand...
Click to collapse
yeah it goes into download mode
. I live in canada.
can you please link me to the proper firmware for Canada's bell SGS? and possibly if there's a guide on how to go back because i m a total noob.
superstrongboy said:
yeah it goes into download mode
. I live in canada.
can you please link me to the proper firmware for Canada's bell SGS? and possibly if there's a guide on how to go back because i m a total noob.
Click to expand...
Click to collapse
Here is a link to the official stock Bell JL2 firmware, there is a slightly newer one but i can't find the link and this should work fine.
You will need to use Odin to flash the file
*edit; forgot the link. http://www.multiupload.com/UTFJCCIP5H
download a stock Eclair or Froyo Rom from samfirmware.com with (512.pit,PDA,MODEM,CSC) get in download mode (vol up+power+menu all at the same time) flash via ODIN DO NOT UNPLUG wait till full flash make shure you have at least 60% battery left before flashing
if it dosen't work search around you'll find some methods its not bricked its just in a continuous loop
i tried flashing with that link you gave, but ODIN doesnt do anything after this
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
superstrongboy said:
i tried flashing with that link you gave, but ODIN doesnt do anything after this
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Click to expand...
Click to collapse
Did you add the tar file to the PDA section of Odin? That should be all that's needed in odin, no repartition, no pit file and the Tar file that was extracted from the Zip file placed in the PDA section of odin.
I forgot to add, did you run Odin as an administrator?
bobloblawsum said:
Did you add the tar file to the PDA section of Odin? That should be all that's needed in odin, no repartition, no pit file and the Tar file that was extracted from the Zip file placed in the PDA section of odin.
Click to expand...
Click to collapse
yeah i did that it wasnt moving forward.
then i disconnected and now when i press HOME+VOL. UP+POWER or only power button, i get the [Phone -- ! -- PC] symbol. i can still go into download mode idk what to do im so screwed.
yeah i m running odin as admin
i flashed that firmware onto my phone.
now all it does is freeze at the Galaxy S screen and vibrates randomly. what do?
superstrongboy said:
i flashed that firmware onto my phone.
now all it does is freeze at the Galaxy S screen and vibrates randomly. what do?
Click to expand...
Click to collapse
Here is the thread where i got the link to the Rom from, i'm reading through it now to see if there are any similar problems http://forum.xda-developers.com/showthread.php?t=883568
According to post #45 on that thread you should flash the rom with the 'Phone Bootloader Update' option checked.
I'm not 100% certain on that and don't want to give you some wrong advice but if i remember right, it was the new bootloader in JL2 that fixed the SD card problems that the Bell vibrants had. It's up to you if you want to try flashing the file with that option checked. Unless you get some better advice.
superstrongboy said:
i flashed that firmware onto my phone.
now all it does is freeze at the Galaxy S screen and vibrates randomly. what do?
Click to expand...
Click to collapse
had u ever upgrade to 2.3.3 ?
try those roms
UGJL2/BMCJL2/UGJL2 (North America for I9000M only)
UGKC1/BMCKC1/UGKC1 (North America for I9000M only)
i dont have any link atm , i will search about that and i will edit my post
NCSoft said:
had u ever upgrade to 2.3.3 ?
try those roms
UGJL2/BMCJL2/UGJL2 (North America for I9000M only)
UGKC1/BMCKC1/UGKC1 (North America for I9000M only)
i dont have any link atm , i will search about that and i will edit my post
Click to expand...
Click to collapse
nope i havent ever upgraded to 2.3.3
and if i take my bricked phone to the store, will they replace it? I still am under the warranty period
superstrongboy said:
nope i havent ever upgraded to 2.3.3
and if i take my bricked phone to the store, will they replace it? I still am under the warranty period
Click to expand...
Click to collapse
They'll send it off to the repair centre and try to determine and fix the problem. If they think the problem was caused by you then they might try to charge you a fee for fixing it.
Have you installed Kies on your laptop before (just to know if you have the samsung drivers that come with it installed)
If it has come to the point where you're thinking of bringing it to the store then, personally, i would try flashing the JL2 rom with the update bootloader option checked. That's just what i'd do personally though.
It could also be something simple like trying to flash it from a different usb port.
bobloblawsum said:
According to post #45 on that thread you should flash the rom with the 'Phone Bootloader Update' option checked.
I'm not 100% certain on that and don't want to give you some wrong advice but if i remember right, it was the new bootloader in JL2 that fixed the SD card problems that the Bell vibrants had. It's up to you if you want to try flashing the file with that option checked. Unless you get some better advice.
Click to expand...
Click to collapse
THANK YOU SO MUCHHHH!!!!! I DID IT AND ITS WORKING NOW!!! YAYAAAAYAAAAAAAAY CANT TElL YOU HOW HAPPY I AM LOL you're a life saver mate.
superstrongboy said:
THANK YOU SO MUCHHHH!!!!! I DID IT AND ITS WORKING NOW!!! YAYAAAAYAAAAAAAAY CANT TElL YOU HOW HAPPY I AM LOL you're a life saver mate.
Click to expand...
Click to collapse
Yea, that was the problem; now I remember! Some months ago, I had your same problem (an apparent brick, vibrating on the big S at the startup). A user suggested me to simply flash a FW with a Bootloader (at the time, the JPU), ad it worked ^^
superstrongboy said:
THANK YOU SO MUCHHHH!!!!! I DID IT AND ITS WORKING NOW!!! YAYAAAAYAAAAAAAAY CANT TElL YOU HOW HAPPY I AM LOL you're a life saver mate.
Click to expand...
Click to collapse
Haha, no problem! glad to help
i was in the same position a few months ago and the JL2 rom helped me out. I keep a copy of it on my harddrive to use if things go tits up again.
hi,
I have a problem when I try to flash my mobile
error:
Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I try this rom
http://www.hotfile.com/dl/204365429/23c974b/S5360JPMA1_S5360OJPMA1_LYS.zip.html
and this
http://www.hotfile.com/dl/167268137/02e6083/S5360JPLF1_S5360OJPLF1_XSG.zip.html
what's wrong??
thanks
* make sure your phone connects to PC in download mode, with driver installed in your PC
* download odinable package from Doky's thread, extract the files inside
* know how to use odin
wazzink said:
* make sure your phone connects to PC in download mode, with driver installed in your PC
* download odinable package from Doky's thread, extract the files inside
* know how to use odin
Click to expand...
Click to collapse
thank u 4 ur reply
I did all that but no change
bahaa87 said:
thank u 4 ur reply
I did all that but no change
Click to expand...
Click to collapse
what's the notification in ODIN when u connect ur phone in download mode?
u'll see it in the first block, should turn to yellow
wazzink said:
what's the notification in ODIN when u connect ur phone in download mode?
u'll see it in the first block, should turn to yellow
Click to expand...
Click to collapse
yes sure I see that
and when fail it change to red
bahaa87 said:
yes sure I see that
and when fail it change to red
Click to expand...
Click to collapse
maybe u should try redownload the file (the odinable package), u might have a broken file
make sure u place the correct files in PDA, MODEM, CSC
do not check other boxes in the odin, leave the defaults
wazzink said:
maybe u should try redownload the file (the odinable package), u might have a broken file
make sure u place the correct files in PDA, MODEM, CSC
do not check other boxes in the odin, leave the defaults
Click to expand...
Click to collapse
I have only S5360JPMA1_S5360OJPMA1_S5360XXLL1_HOME.tar.md5 & totoro_0623.pit
and I try 2 roms
bahaa87 said:
I have only S5360JPMA1_S5360OJPMA1_S5360XXLL1_HOME.tar.md5 & totoro_0623.pit
and I try 2 roms
Click to expand...
Click to collapse
where did u get ur files?
have u tried checking here? -->
http://forum.xda-developers.com/showthread.php?t=1465800
bahaa87 said:
I have only S5360JPMA1_S5360OJPMA1_S5360XXLL1_HOME.tar.md5 & totoro_0623.pit
and I try 2 roms
Click to expand...
Click to collapse
After you extract the rom zip, you will see 4-5 files(not sure).
Flash only this files.
xxxx_pda.tar.md5 (in pda)
xxxx_modem.tar.md5 (in phone)
xxxx_csc.tar.md5 (in csc).
Also give full log of odin if possible.
You either die a hero or live long enough to see yourself become the villain.
thank you very much.
It's work successfully
thanks
I tried to install the N9005XXUENA6 firmware using odin and this happened:
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
And now it's stuck on odin mode, please help!
arboy2 said:
I tried to install the N9005XXUENA6 firmware using odin and this happened:
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
And now it's stuck on odin mode, please help!
Click to expand...
Click to collapse
put it back in download mode and flash again
if not download it again you might of had a bad download
For some reason on the tutorial it says to select stuff that doesn't come with the rar, care to give me a step by step instruction on the Odin 3.09?
arboy2 said:
For some reason on the tutorial it says to select stuff that doesn't come with the rar, care to give me a step by step instruction on the Odin 3.09?
Click to expand...
Click to collapse
are you just flashing stock or stock and root
jaythenut said:
are you just flashing stock or stock and root
Click to expand...
Click to collapse
Right now just stock N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar 4.4.2
arboy2 said:
Right now just stock N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar 4.4.2
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=PurJfuEsA0s
heres a how to
jaythenut said:
http://www.youtube.com/watch?v=PurJfuEsA0s
heres a how to
Click to expand...
Click to collapse
Still does it for some reason :'(
I even closed kies like he said
I'll try downloading the firmware he included although it's the same one I think
arboy2 said:
Still does it for some reason :'(
I even closed kies like he said
I'll try downloading the firmware he included although it's the same one I think
Click to expand...
Click to collapse
Try this guide. Step by step! Even redownload this file! Like said above, you might got bad zip. did u check md5?
http://www.droidviews.com/android-4-4-2-kitkat-firmware-for-samsung-galaxy-note-3-sm-n9005/
Report back if it helped
I redownloaded the file and it still does it! ((
arboy2 said:
I redownloaded the file and it still does it! ((
Click to expand...
Click to collapse
Are you sure you followed this guide? http://www.droidviews.com/how-to-install-restore-stock-firmware-on-samsung-galaxy-note-3-all-models/
Because i used this one and it worked perfectly. Didn't use any magic.
What Odin version you have? Is it v3.09? Have you installed all the drivers, samsung kies...
ryanrazer said:
Are you sure you followed this guide? http://www.droidviews.com/how-to-install-restore-stock-firmware-on-samsung-galaxy-note-3-all-models/
Because i used this one and it worked perfectly. Didn't use any magic.
What Odin version you have? Is it v3.09? Have you installed all the drivers, samsung kies...
Click to expand...
Click to collapse
I tried following the guide and it still did it, using Odin v3.09, found a possible fix here http://forum.xda-developers.com/showthread.php?p=47287747 gonna download and try it
arboy2 said:
I tried following the guide and it still did it, using Odin v3.09, found a possible fix here http://forum.xda-developers.com/showthrea.php?p=47287747 gonna download and try it
Click to expand...
Click to collapse
ok, report back if helped. mean while http://forum.xda-developers.com/showthread.php?t=2619017&page=2
Try his solution. It was a simple usb trick. If u use usb 3.0 try 2.0 and if you use desktop comp try back usb not fron. Try restart the computer... I know those are all weak tips but i would try everything in your case.
Hope you fix it bro..
ryanrazer said:
ok, report back if helped. mean while http://forum.xda-developers.com/showthread.php?t=2619017&page=2
Try his solution. It was a simple usb trick. If u use usb 3.0 try 2.0 and if you use desktop comp try back usb not fron. Try restart the computer... I know those are all weak tips but i would try everything in your case.
Hope you fix it bro..
Click to expand...
Click to collapse
Already tried usb 2, didn't work and I would restart but I'm downloading that N9005XXUDMJ6_N9005OXADMJ4_BTU.zip rom
Same thing happened with me, after it froze in odin mode I took out the battery for 5 mins, then put it into download mode (bit fiddly holding in the buttons and pushing the battery in) the I flashed Cwm recovery using odin, and hey presto my phone came to life...
Sent from my SM-N9005 using xda app-developers app
Well I tried with that other firmware and :
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
on the phone it said: SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
((((((
heeellllppp T_T
arboy2 said:
Well I tried with that other firmware and :
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
on the phone it said: SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
((((((
heeellllppp T_T
Click to expand...
Click to collapse
Sorry to hear that.. waay beyond my knowledge. You might change the title (if possible) to smth like: "After flashing 4.2.2 NA6 - stuck in Download mode, help"
Might attract more people to help you, bro.
:/
ryanrazer said:
Sorry to hear that.. waay beyond my knowledge. You might change the title (if possible) to smth like: "After flashing 4.2.2 NA6 - stuck in Download mode, help"
Might attract more people to help you, bro.
:/
Click to expand...
Click to collapse
Might be a long shot but for some reason Odin says I9505 aka galaxy S4 instead of my note model, could it be it?
EDIT: No it's not it I saw here https://www.youtube.com/watch?v=PurJfuEsA0s it was the same, but what is it!!! ;_;
Why you don't try another PC?
Sent from my SM-N900 using Tapatalk 2
arboy2 said:
Might be a long shot but for some reason Odin says I9505 aka galaxy S4 instead of my note model, could it be it?
EDIT: No it's not it I saw here https://www.youtube.com/watch?v=PurJfuEsA0s it was the same, but what is it!!! ;_;
Click to expand...
Click to collapse
When you installed via odin, was there only 1 tar.md5 file (all in one) and you just added AP and flashed or did you have 3 files, flashing bootloader manually, rom manually and another one that i don't actually know what it is, like this guy http://www.youtube.com/watch?v=W0QcggQ5bAs
also, re-partition was ticked off?
When i was flashing i couldn't figure out why my ROM ZIP had only 1 file and the guy on youtube had 3 files, than i found tutorial that suited me (all in one installation)... i still don't know why are there 2 different procedures...
what CSC region of your phone?
-On 1st post you had ext4 error, more likely your is HK or Some Asia model with bad ext4. If in this case someone had own HK handset successful flash KK update.
PS: I think better way for more people to help. you should post your AP,CP and CSC of your phone.
Sent from my SM-N9005 using Tapatalk