Hi,
I've got an Orange M500, upgraded with the Imate ROM 1.12.00WWE - ever since I upgraded the ROM, I can connect to my Orange GPRS service fine, however, if I disconnect then try to reconnect again, the connection fails. I have to turn on flight mode, then turn on the radio again in order to get GPRS access.
I've tried upgrading to Radio 1.13.00, but still no joy.
Any ideas?
Mine does that and I have the original ROM. A bit of a pain isn't it.
Here's the fix
This was originally posted by Peter for the imate JAM.
I just installed it and it's working like a charm.
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is Ok. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
I have the same GPRS problem too. However, the link you provided just asked for the password to access that ftp. Hey, acs540, do you know the password or do you have that CAB file? Thanks in advance.
usernameassword is xda:xda
The fix in this post seems to refer to caller id!?! I too get the gprs connection problem and have made it better with different roms but not found a sure-fire fix.
If anyone has a patch that fixes this, please post it!
GPRS now working
Hi,
Finally I tried, or at least halfway, After I removed the CallerID everyone is talking about my Qtek9090 now works flawless regarding GPRS.
This is very interesting that Caller ID software makes GPRS not working
Anyway, now I can start and stop GPRS several times, I have now toggled it 10 times without any problem.
Before I had to reset/toggle radio to make it reconnect after a disconnect.
Thank you all that has investigated this problem!
One last thing, Do you really need CallerID? :roll:
Br
Lars
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
XShell said:
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
Click to expand...
Click to collapse
Well, yes, I have changed to Class8 (4R1T), default was (I belive) Class10
Br
Lars
Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
I install in htc touch the followings programms
Skype
ewallet
Pocket CM Keybord
sdkCerts + Windows Live 10.6.0034.0800 fixed
Now i go to Comm manager and i press the button for WLAN. The WLAN is dead. When I go to the Setting --> Connections the icon WiFi is disapear.
Please help me....i have bought the mobile 3 days ago with sim unlock,
Please help me
Uninstall everything you can, if it doesn't help, do a hard reset. After installing each CAB, try to use WiFi.
Hi i have the same Problem.
I instlled diverent Rom. Always the same. I cannot activate the Wifi.
What else can i do? Would another Radio Rom help?
I have done many times hard reset but nothing.
archonw? You have install different ROM and still cannot activate WiFi? Have yοu try original ROM?
I THINK I FOUND THE SOLUTION. In folder My Device -->Windows there are some files
There is a file Wrlsmgr. When i open this file then i see something like the Comm Manager. In this programm there is bluetooth and phone button. When i press the button i can activate or deactivate the phone or the bluetooth. I see then that there is no button for WLAN. I go to the files about bluetooth and phone and i see the followings files.
BluethSetting.htm
Bluetooth Explorer
BluetoothSetting.dll
phone.dll
phone.dot
phone.pwi
PhoneSetting.dll
Then I go to the files about wireless and i see the following files.
Wireless LAN
wireless.bmp
WirelessLAN.htm
WirelessService.dll
WLANSettings.exe
WLANSettings.exe.0409.mui
Do you see something strange? I see 2 thing. There is no a file WLANSettings.dll like bluetooth and phone and what is this WLANSettings.exe.0409.mui strange file?
If some want help me please i would like to see if my files is the same as the files in his phone.
Thank you very much
Hello all,
This question i have asked many a times still didnt got any solution again asking once more. Now i cooked wm 6.1 for opal it works fine but whenever i cook wm 6.5 and above (wm 6.5.1/6.5.3) my wifi would autostart (wifi status is off in kitchen) on welcome screen... after configuration and first boot when i try to turn off wifi it gets off but after a soft reset my today setting, wifi, bluetooth , comm manager and a lots of things wont work.
So i have got some alternative solution but all have some problem.
1. If i remove serial32.dll my rom works fine but i wont have bluetooth working.
2. If i remove serial32.dll reg entry then also same result no wifi bug but bluetooth wont work.
3. If i remove bluetooth packages from sys same result as above.
So finally i dont have any solution even i tried to remove serial32.dll and later i made cab and installed but after installation it again conflicts and as a result my today setting etc wont work. I also tried switching some driver with gene, elfin but same result.
The only possible solution i see is:
1. To use a different bluetooth stack but unfortunately there are no alternate bluetooth stack for opal (but i tried to install widcomm one with little mod it worked but again iam not sure coz its not finding bluetooth devices)
2. Any alternate dll for serial32.dll which will do the work of serial32.dll but should be compatible with opal (omap 850).
Anybody as some solution?
Anyone has some idea?
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
hey thanks man
maybe u will find a fix for derefas sd card fix too?
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
MobileMini said:
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
Click to expand...
Click to collapse
I start to believe is this...i'm gonna use use Stock ROM and i will keep you posted if it will be any changes
nsourm has a dualbootloader in his ROM
Maybe its better to boot Android not from "within" WinMo.
Can someone test that?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
In my case the prob was "htcUPCTLoader.exe" it was not allowing deamon to start..so i had to kill it and then run the run.bat file....
Can u try it this way..??..connecting the Mini with pc..running run.bat...after that killing htcUPCTLoader.exe process in task manager..and then running run.bat file again..??.... it might work....if not..then there's no harm done
I dont need to try. The kernel module file (*.ko) in the image is updated. So the problem (at least for me) is not adb push. must be something different.
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
The only thing I changed was adding in the run.bat
Code:
taskkill / F / IM htcUPCTLoader.exe
On beginning of everything, to finish the process before starting the adb. I haven't touched anything of the files zImage and adb.exe
http://www.megaupload.com/?d=3NKI5Z0U
This is my system (android 2.2) running Wifi.
Sak_1 said:
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
Click to expand...
Click to collapse
Thank you for all you've done! Unfortunately,it didn't work on my mini. (my windows rom is 1.38). Still,thank you!
JAntrobus said:
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
Click to expand...
Click to collapse
Its the same behavior as the fixed module was not installed.
If you tab Wifi, it just grays out and do nothing. No error message.
See, im on the standard ROM. And no matter what I try, I get the same.
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
codiak said:
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Click to expand...
Click to collapse
i dont think anyone touched haret after cotulla patched it for mini
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
It worked, mine no longer displays as error. But I dont have any WiFi's to connect to as im also at work. But it looks much more promising.
Just we need to start looking into getting the battery reconised by Android, having to go into Windows to charge my phone.
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
codiak said:
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
Click to expand...
Click to collapse
Unfortunately there wasn't any precise error message. As you said it only was greyed out with "Fehler" (error) written below the wlan switch. It's strange that there still isn't any solution working for everyone.
For me, no "Fehler" came up. Just grayed out. Same behavior like I never applied the patched module. But i can see the patched .ko file in the phone
I´m using tzacapaca patched ext2 file that works for him...