[Q] small problem wit hermes - Windows Mobile Development and Hacking General

Hi, I have a small problem, I bought a hermes where you installed Windows Mobile 6.5.5 and want to boot, and hangs at welcome screen windows logo. and now I want to install back again officiale rom. pls help me. I have herm200 spl-1.09 and not even flash via sd card .. still writes me an error update

Related

help new bootloader and old rom

hi ....please help
everex e500(eten p300) wase ubgraded withe wrong vergion of rom
it started to ubgrade and ubgraded the boot loader form usb donloader 1.5.4
to usb downloader 1.5.4_ce and shoude the ronge rom isuu Ok thin the unit
wase working probuly withe the new bootloader and the olde rom and one
day i for got the ppc at the boot loader screen tel the battrey was dead
and the oberating system rom wase erased now the ppc is poting at the
boot tloader and stopes and i cant install the olde rom bicause the inistaling
softwear is not recognizing my unit you know the system is shoing it as eten
new hard wear i tryied allot of things all around the wep and no help i think
that the easist way is to chang the old rom .bin fil to the temp formate
and place it in the [C:\Documents and Settings\.......\Local Settings\Temp]
fill so please any body knowes how to do this pleas help ihave been
working on this for almost 2monthise and ihave tride almost evrithng i founed
at the net and no help
whats up
hi evry body i wonder if no answer or what im saying is not kleer and thankes
in advanced.........

ROM 6815

Hey guys!
I found myself in a little dum situation today.
Tryed flashing my 6815 via pc and it loaded everything.
It downgraded my PBL to version 1.0.1 And loaded totaly different OS on my 6815. I used sp34053.exe for downgrading.
But now I am stuck with this I don't know how to call it OS that is totaly of screen left side is of screen like sombody cuted it.
and I cant upgrade my os via MSD card allso now I can't use USB vith PC cuz it doesn't recognize my device like nothing is connected (6815)
How can I repair this any ideas I know theres lot's of brainacs here so PLEEEEEEASE help me
you might want to try here
http://forum.xda-developers.com/forumdisplay.php?f=296
the 6815 is a rebadged Atom

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You must upgrade :
-Remove SD-Card
-Remove Sim-Card
-USPL
-Upgrade new ROM
thank. i got through to install wm 6.1.
can any one please tell me which is the most stable ROM for 6.1 or 6.5
which one is better for my HTC artemis.
please post link to the ROMs
I'm using two roms :
Shady313-23081R1 : http://forum.xda-developers.com/showthread.php?t=546805
dheewatara-s 23075B1 : http://www.pdamobiz.com/forum/forum_posts.asp?TID=255901&PN=1
same problem..pls help
i have same rom and ratio with u nomi...but my problem still occur...
where do u get the USPL eventually?

imate jasjam error flashing pls help

hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken

[Q] hermes 8525 freezes

well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?

Categories

Resources