Related
Hi!
Before I start tese are my current system info:
XDA2ii (O2) - UK
ROM version 1.10.00 WWE
ROM date:24/12/2004
Radio ver: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.10.124 WWE
OS: Windows Mobile 2003 2nd Edition
Version 4.21.1088 (build 14235.2.0.0)
I am trying to connect to my home WIFI network but I can't seem to connect. It is indeed picking up the server (name appears) in list but just stops at connection to network. It can't seem to get any connection at all. My wireless router (Linksys WRT54G) can't seem to detect it as well.
I have tried connection to WIFI at an airport and it seems to work but not at home. I have set my Linksys to Mixed mode (B and G) but still can't get it to work.
Any advice?
Thank you!!!
XDA IIi (or 2i) and 3COM WAP
Hi.
Got the exact same (everything) XDA IIi model (also O2/UK). I'm also having problems with WLAN/WIFI connectivity both at work and home. Both cases it's a 3COM OfficeConnect WAP (office one not setup by me). I thought I validated that the XDA seems to be OK by being able to connect to a neighbours WAP (some BT-Voyager thing) with no apparent problems. And so was thinking that the problem is with the 3COM WAP. However, your post raises doubts on my conclusion ...
The search goes on ...
Re: XDA IIi (or 2i) and 3COM WAP
hi
My case is even worse, it can not detect any wifi signal at any of the hotspot in my city. Go to wireless Lan Manager, under WLAN button (red status) there is alwayls a sentence: "no connection in use". Clicking to it, the device seem to search but found nothing.
Try softreset, hardreset but the problem remains.
In addition, I try to turn off the phone (turn on flight mode) then it don't allow to turn on bluetooth and wifi too.
Maybe it is due to hardware error.
Really disappoint with O2 UK
Regards
Tuan
WiFi connection problems with XDA2i
I have exactly the same O2 xda2i build as Johnnyboy, and precisely the same problem with WiFi as Blackwolf and Johnnyboy. I have a netgear WiFi access point at home, and have disabled the attach restriction and removed WEP. However, although the XDA can see the network name, it cannot connect to the network (just displays connecting...) nor does it show anything on the signal bar. Needless to say, it does not display SSID, Tx rate, Channel, IP address or any information from the network.
I have bought this device specifically for wifi access, and it is somewhat disappointing. Anyone have any idea how this can be fixed? (if at all :? )
XDA Wi-Fi Successful Connection!!!
Hi,
I'm new to the forum and new to XDA2i....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
Finally cracked it! As I never had any problems with my Netgear MR814 wireless router, I assumed the issue was with the XDA2i. Instead, a router firmware upgrade did the trick! Should have thought of that earlier.
Cheers, S.
When i first got my XDA 2i home from the shop the first thing it tried was the wireless lan, and the same thing happend to me also..... everything fine in the router but still unable to connect the xda.
anyway after few hours of going over every single setting time and time again , it finally worked !!
i left the Wlan enabled and after a period of a few minutes it connected to my network.
So i think the XDA 2i is quite tempremental with Wlan, as i know my settings were correct.
having said that, i have had no problems with Wlan t all since then, it will now even connect to other Wlan hotspots with no problems whatsoever.
The only problem i have now is recieving a decent O2 Cellphone signal i my area
Well I have a XDA IIi and it connects fine and allways has to Citi Hotspots, TMO hotspots and my own Linksys WRT54GS. Netgear is the biggest piece of crap ever sold. If you have one I suggest you soak it in gas and burn it.
I had a problem with my XDA IIi connecting to a home Wi-Fi network with a Linksys WRT54GC router: a signal showed in the Wireless LAN Manager, including an IP address, but the WI-Fi icon at the top of the Today screen had no connection bars. After days of this I went to the Linksys settings for an unrelated reason and disabled Wireless SSID Broadcast. Inexplicably this appeared to cure the WiFi problem with the XDA IIi, and I can now connect with ease.
Ok, I might as well add my question to this thread, as it's relevant.
I have an O2 UK XDA2i, and I've also experienced similar problems connecting the wifi and managing to get it to work properly.
I'm at Uni in Birmingham, and at some of my faculties there's wifi for students and staff to use - they give the broadcast SSID UCEOpenAccess, and you use your system logon (in my case STUDENTS\F05310011 and my password (secret ).
I have these details set in the LEAP tab of my wireless lan config (in the WLAN settings) - I have an entry named UCEOpenAccess, and I have my username and password (and domain) set correctly, and the auth type set to Open System (as opposed to EAP, doesn't seem to make any difference whatever I set it to)...
... I just can't connect to any wifi network! I can't even _SEE_ the wifi network, and I know it's there, I can pick up other wifi networks and detect them using Wifi Graph and Hitchiker. I just, bizarrely, can't see the one wifi network I'm trying to connect to.
It's incredibly frustrating. I have my network adapter set to connect to Work (as I've seen advised on these forums), and my IP is assigned via DHCP (they use a weird class b subnet for their network), and the proxy to connect to the Internet is also setup correctly in my Network (This network connects to the Internet checked, This network uses a proxy to connect to the Internet, and proxy is specified in the box), and as the proxy is a SOCKS 5 authenticating proxy, all the relevant details and username+password are in place in the Advanced settings.
Still doesn't work!
Is it due to my original (and decrepit, from the looks of things) firmware and software versions? I'm running original radio, is that a problem maybe? I've scouted about quickly for updates from O2 for my XDA, but I don't want to install a Japanese update as I don't reallllly want to have to read Japanese (and I can't, etc) - I don't want to make a brick out of this brand new phone, but the resources for total xda newbs is somewhat lacking. Can someone just poke me in the right direction with a stick?
Cheers all.
Hi,
I am thinking of replacing my Magician with TyTn because the WI-FI is a nice feature to have.
How easy is it ? I mean, configuration wise.
Because I travel a lot and stay in a hotel.
Usually, in the hotel, they offer WI-FI access (mostly you must pay for the service).
What kind of WI-FI connection can be made using TyTn ?
Is there any kind of connection profile that we can configure and choose for ?
Maybe this question is stupid, but I dont have experience with PDA and WI-FI access (as you know that I am using HTC Magician!).
Have you ever used your TyTn to connect to a Hotel WI-FI access?
Thanks for sharing your experience.
Configuring Wi-Fi on TyTN is very easy. With default settings you just need to turn on the wifi and wait for the phone to detect wireless networks.
TyTN supports 802.11b and g (10Mbps/54Mbps)
Dunno about the profiles. You can add accesspoints/ad-hocs and choose which to use.
However, if the wireless lan you connect to is open (no encryption) and uses DHCP you only need one access point for that and theres no need to do anything else.
I have used Wi-Fi access in a bar without any problems. Shouldn't be any different when using it in a hotel if the AP signal is strong enough.
At home, TyTN can't be further than 15-20m from my AP without the signal dropping down to zero.
Wifi configuration is the same in all windows mobile 5 devices, you can connect to a network and store the credentials, so next time you connect to the same network you don't have to reenter them.
Regarding Hotel hotspots, these are usually open networks (no encryption) with a captive portal. Support for PocketPC devices is usually ofered by most companies providing this service and should be no problem in that.
I've used PocketPC devices with wifi to connect in KubiWireless, Boingo, The Cloud and T-Mobile hotspots without problems.
Be aware that the wifi range of the TYTN is tight, and WM5 has some issue with wifi:
-No WPA2 support
-No aes cypher algorythm
-Buggy with PEAP auth + certs
What About VPN, we have VPN Service in the University.Is there VPN client for WM5, for the laptops we are using Cisco VPN Client
Jorshua, forget about Wi-Fi in TyTn, its so bad.
Read this thread http://forum.xda-developers.com/showthread.php?t=276904
I don't have so much problems, in the uni the signal is very good, I am asking about VPN is there client for WM5.
In my nouse I have an WIFI network with WPA and WPA2. When I use encryption, even WEP, te connection is established but after a few seconds of data transfer, there is connection goes dead. I tested an open connection, a WEP 64, 128, WPA en WPA2 connection. All except the open unencrypted connection stop working after a few seconds. The Ameo keeps being connected to the accespoints, but there is no traffic anymore.
Has somebody else had this problem? I will try a hard reset to test it with a clean install.
Gerald
Hi there what make is your Access point? (is it a Belkin or Netgear possibly?)
Accespoints
I have a Zyxel 2602HW and a SMC2870W.
You've not got a 3G data session already established have you? I'm guessing its a WM5 'feature' rather than a specific Ameo fault, but if you're got 3G running, then connect to a Wireless Access Point, it gets itself all confused and tries to use the 3G connection for net access. I normally just quickly turn the phone service off and on, once the wifi service is running, via comm manager.
I've also noticed something else, where if I'm sending or receviing e-mail, and I'm already connected to the wifi point, it doesn't know to use the 3G connection rather than the wifi point to access the t-mobile servers. You have to close the wifi session before it is able to send/receive the messages (which don't always immediatly retry) but I'm guessing that maybe I could do something with routing on the Ameo. I need to get a grounding of the network stack on it before I can do it.
No, I tested it by putting it in flight mode and then enable wifi. When I do not use encryption, there is no problem. It works and I can watch ip televison. But when I use encryption, I cannot get a connection with whatever url within seconds. Only reconnect give me again a few seconds. It is frustrating. My MDA PRO and my DELL X30 do not have any problems at all.
QAN said:
No, I tested it by putting it in flight mode and then enable wifi. When I do not use encryption, there is no problem. It works and I can watch ip televison. But when I use encryption, I cannot get a connection with whatever url within seconds. Only reconnect give me again a few seconds. It is frustrating. My MDA PRO and my DELL X30 do not have any problems at all.
Click to expand...
Click to collapse
yeah i think it happended to me as well..i cannot get connected gor long...at always disconnected and connect again...
one more thing..my previous UNI it always auto detect..but not with dopod..
Compatibility
I found that the Athena is compatible with 3Com accesspoint but not with Zyxel or SMC. I use my neighboors 3Com and that worked. I decided to install my old 3Com Home Connect accesspoint and that one also worked. But the others do not. At this point it does not matter if I use encruption or not. Only the 3Com devices work. Does anybody hav another type of device that works?
Odyssey Access Client
I found this WPA/WPA2 client from Junipur http://download.juniper.net/software/aaa_802/public/oac/WM_Client_45/OdCeClientPPCSigned.ARMV4.CAB
If you have installed this install directly the following file and reset your device. ftp://xda:[email protected]/Uploads/Software/OdCl450CrOnlyFALLEN.cab
Now you will see that the Ameo will connect to the other accesspoints.
So you see there is a bug in the WIFI part of the radio rom!
No problem for me, i´m usung a netgear WG834GT for the moment.
Maybe my HTC X7500 Advantage has some other roms with the problems solved because it is swedish
Chill \Björn a.k.a Invalido
QAN said:
In my nouse I have an WIFI network with WPA and WPA2. When I use encryption, even WEP, te connection is established but after a few seconds of data transfer, there is connection goes dead. I tested an open connection, a WEP 64, 128, WPA en WPA2 connection. All except the open unencrypted connection stop working after a few seconds. The Ameo keeps being connected to the accespoints, but there is no traffic anymore.
Has somebody else had this problem? I will try a hard reset to test it with a clean install.
Gerald
Click to expand...
Click to collapse
I have no problem using the WIFI. I'm normally able to see about four if I'm at home. The other access points are my neighbours', some of which are secured while others are'nt. If I connect to any one of them they tend to drop off after a while due to week signals. Even if I use my own within the house, the signal is weak sometimes, in which case, the system automatically goes to UMTS connection which is far far faster in my case (Because my WIFI's bottlenect is from the slow ADSL speed of 512kbs download speed max, and my phone, running at UMTS, has higher speed.
So, check the signal strength and see if this is the cause.
Since my works all the time, may be by showing you my wifi configuation for comparison might help.
I'm using WEP data encription. The network key is entered on start>setting>connection>Wi-Fi. I would see all the hot spots there. After I selected my own WIFI, I select connecting to the internet and press NEXT. In the next screen I chose Open WEP and untick automatic box. I then enter the network key which I obtain from my router administration screen on my PC.
That's it. I hope you have your problem resolved soon
Thanks for the info, but this is not my problem. I can connect to whatever accespoint. Only my neighbours accespoint makes it possible to connect to te internet. When I connect to my own network my ZYXEL is giving me troubles because it is blocking traffic after 10 seconds. It doesnot matter if connect to it by WIFI or using my SMC bridge that is connected bij LAN. It doesnot matter if I use encryption or not. Strange enough when I use Odyssey Access Client I can connect to the internet. I have to say that this is not always the case. The signal in my home is more than 80% for both WIFI gateways. Every other device I use, an MDA PRO and a DELL X30, do not have troubles when they want to connect to the internet. So I conclude that the WIFI on my Ameo is not completely compliant. This could be my device, te rom or my gateways. I do not think my gateways are the problem. Both are from different manufacturers.
Seems to me that I have a similar problem...
I got my Ameo yesterday and installed W-Lan. I'm using WAP encription. I get a very weak signal and have a very slow Internet connection (like in the "good-old 54k modem days" ;-). Sometimes there is even no response from the internet. Then I have to close W-Lan in the connection manager and to restart W-Lan again.
Dieter
That is exactly my problem. It works at the beginning but after a few seconds it looks like the Ameo is in quicksand. There is no information from the internet anymore that reaches the Opera browser. I tried Odessey Access Client with better results, but it does not work all the time.
@dieterpapa
What type of accespoint do you have?
i´m using a linksys wrtg router + an additional linksys range expander to cover my house completely.
what i´ve seen, too is that using the ameo about 3 mtrs to the expander i only get minimum w-lan signal.
do we perhaps have a problem with the antenna ?
@qan: how is your signal strength?
dieter
I have the same problem. gets connected no problem. I can download files from my pc. But leave it a few seconds to look at a web page then the connection drops I have to reconnect at com manager. never happend with my mda.
QAN said:
Now you will see that the Ameo will connect to the other accesspoints.
Click to expand...
Click to collapse
I had the same problems while connecting the Ameo to a Freebox (special router for French DSL offering, http://adsl.free.fr/wifi/).
After installing the programmes you listed (and restarting several times) I could connect with the new WiFi tool. Now sometimes I have problems when the programme thinks WiFi is disabled but in fact it is not, but this is only temporary.
Thanks!
Found Problem!!!!!!!!!!!!!
I have finaly found the problem. I am sure the problem is within the rom of the Ameo. The problem is caused by the auto scaling feature of the processor. When the WIFI connects to an encrypted accesspoint the WIFI connection is not setup correctly. To prove this I have installed Pocket Hack Master and disabled the build-in scaling. After this my Ameo connect without any problem to the accesspoint and internet. This works with every processor frequency from 104Mhz up to 728Mhz. Yes at 728Mhz the Ameo is blazing fast. You won't recognize your device. Also after activating the scaling feature of PHM it still works. After disabeling PHM the connection went dead again.
You have to deactivate the build-in scaling before you activate the WIFI connection.
Lets hope someone can patch the rom or that this problem is not available within WM6.
Gerald
And how to disable internal scaling ?
Dieter
dieterpapa said:
And how to disable internal scaling ?
Dieter
Click to expand...
Click to collapse
it's in the setting, disable internal scale
Thanks - found it in the hack master setting.
However my Ameo doesn't pass 728MHz - it hangs. Maximum is 663 MHz.
Dieter
Hi All,
I too have a strange WiFi issue. Here goes:
My phone is able to connect to free WiFi stations and the WiFi station at my parent's place. When I try to connect at home, it connects but I am unable to browse.
I previously used WEP encryption and have also tried removing all encryption...but no luck.
Here are my current router settings:
Band 2.4 GHz B+G
Mode AP
Channel 9
Authentication Open
Preamble type Long
Broadcast SSID Disable
Encryption None
Use 802.1x Authentication Disabled
Phone Details
HTC Touch
Browser Netfront/IE
My laptops, DS Lite, Wii can connect and work with the router...
Any help will be highly appreciated
Check that you don't have MAC ADDRESS FILTERING at the router. It may be hidden under Filter settings, like my D-Link is. This may sound trivial, but more than once I forgot about the MAC filtering.
If that doesn't help you, then just to narrow it down, at my home I use WEP and disable SSID broadcast also, and my Touch can connect fine, and fast.
Scratch the last post! I had the same problem with my TOUCH..Just put the power level to the max (i.e. go Start -> Settings -> Connections -> Wireless LAN -> Power Mode -> and slide all the way LEFT to Best Performance) and all hail ..your problem solved
I also use a Touch. I put the slider all the way to the right (Best Battery) and I connect fine. You people must have a big house, or a crap router?
HTC Touch wireless lan connection problems
hi,
Im having the same problem. No MAC filtering & no encryption on ADSL router.
HTC touch can connect to the router at 192.168.1.1. But it does not connect to any other web page.
Message shown is: "Page cannot be found. Check the name and try again."
Any other tips.
Thanks in advance.
dbmayur said:
Hi All,
I too have a strange WiFi issue. Here goes:
My phone is able to connect to free WiFi stations and the WiFi station at my parent's place. When I try to connect at home, it connects but I am unable to browse.
I previously used WEP encryption and have also tried removing all encryption...but no luck.
Here are my current router settings:
Band 2.4 GHz B+G
Mode AP
Channel 9
Authentication Open
Preamble type Long
Broadcast SSID Disable
Encryption None
Use 802.1x Authentication Disabled
Phone Details
HTC Touch
Browser Netfront/IE
My laptops, DS Lite, Wii can connect and work with the router...
Any help will be highly appreciated
Click to expand...
Click to collapse
hencre said:
hi,
Im having the same problem. No MAC filtering & no encryption on ADSL router.
HTC touch can connect to the router at 192.168.1.1. But it does not connect to any other web page.
Message shown is: "Page cannot be found. Check the name and try again."
Any other tips.
Thanks in advance.
Click to expand...
Click to collapse
Same problem I am having now. I can connect now wifi, but get same error.
??????
Wifi Problem!
Hi guys,
I've got a problem and I'm hoping you can help me out..
I've got a HTC TOUCH and when I got it the Wifi connection was working just fine.. I could connect to any WIFI network and Browse the internet.
After a month or two, my phone wouldn't connect to my home wifi network anymore. And neither would it connect to any other wifi networks (I tried!)..
I've been all over the internet trying to figure out what could have happened and if someone else was having these problems to.
I just can't find the answer and I feel like I already tried everything I could think of..
Hope some of you knows what to do..
I'd suggest looking at the Touch forum... I've got no experience of Touch devices, but it may be a Radio ROM issue...
kinda same issue I am facing ! donno
MY HTC TOUCH never connects to NETGEAR WIRELESS ACCESS POINT
but finds LINKSYS routers in a jiffy :O
are Wireless Access Point and.. Wireless routers different
they both emit diff. signals ?
I have the same issue with a TYTN II, can connect to the wireless, but can't open any web pages.
problem with htc & WPA-PSK passkey 25 characters
My htc tilt connects almost everywhere, but i have a problem with wpa-psk at work. The password is from 25 characters, I read some articles what WM cannot handle such length. Maybe it's possible to edit somehow the registry?
I have the same problem guys, what can we do to find a solution i tried everthing i could, and i even tested it out with my 2 wireless routers, and at public places it connects (at home it doesnt connect though).
shirreer said:
Scratch the last post! I had the same problem with my TOUCH..Just put the power level to the max (i.e. go Start -> Settings -> Connections -> Wireless LAN -> Power Mode -> and slide all the way LEFT to Best Performance) and all hail ..your problem solved
Click to expand...
Click to collapse
Thanks a lot!
I had exactly the topic problem with manilla rom on my kaiser, could not use wifi any more. But with just sliding the meter to 'Best Performance' as suggested, wifi it once again works like a charm.
HTC Touch wifi solve
I had the same problem with my htc in WEP it dosen't browse, I changed the router to a better wifi protection like WPA-PSK, connected and worked fine, for some reason it only work's fine for a couple of minutes, I readed this post to put the sidebar in best performance and now everything works fine. An advice don't use WEP it's not secure at all.
http://en.wikipedia.org/wiki/Wireless_security maybe you fine this interesting and helpful.
I'm running into a problem were I can connect to an AP at work and surf the net fine but when I disassociate I cant connect to it again for a whole day. The AP must be saving some info and therefore will wait for the DHCP lease time to finish before allowing the touch to re-connect. I tried my laptop and was able to connect 3-4 times and never have a problem so it is isolated to the touch and windows mobile 6.1. To find some more info out I was able to clone the mac of the touch and use it as the laptops wifi cards mac. It connected fine on 3 consecutive tries.
Maybe windows mobile is missing some commands when disassociating from an AP and as a result leaving info out in nowhere land confusing the router.
Thanks for any help!
ok, here's me joining the club... dunno what happened... working one day, getting crap the next.
exact same problem as everyone else...connects to the wireless network, then when you try to surf, page cannot be found...
Exact same problem here.
In the beginning everything fine. Connecting to my home WiFi and using the internet without problems (weather, stocks, opera, email, google maps, even skype voip).
Then, last month, all programs are unable to find anything on the internet, although the device reports it is connected to my (unchanged) home WiFi.
All these programs work fine when the device is connected to the internet through activesync (usb cable).
Also this whole time I have been using my home WiFi with a laptop from both Vista and Ubuntu, with no problems, so I guess it's not the router.
Also have read in other fora about these wifi working - wifi not working "cycles" other people have had, with various WM devices. And various tricks like shutting wifi off and immediately on again.
I even hard reseted the device. Problem still there.
WTF?
Connected once only
Connected once only for a few minutes to my home router dir 310 D-Link, worked fine and fast. After that I closed the connection. Next day I tried to connect but my HTC Touch 3G doesn't see the router. I see any other routers, but I do not see mine. I connected to some friends routers with WEP and WPA encription just to be sure the phone working. During this I didn't changed the router or the phone settings. It is very strange. The problem maybe comes from the router.
I'm having the same issues with my HD2. Looking all over the place and seems to be a common fault, but thus far with no cure, I tried the power save mode
From new it worked like a dream, but then one day it would connect to AP's but act as if not connected. I flashed my ROM with the VERY impressive Merlion Leo v 2.66 and it all started working again. Then yesterday, it stopped again. I don't want to reflash, so I'm working hard to find a cure, and will report as soon as I find one.
---EDIT---
I've found a cure (for mine at least), not sure if it will work for everyone, and haven't managed to test it at any other AP's except for my home Router, but all I did was set the network card properties (Broadcom 802.11 DHD Network Adapter) to 'Use server-assigned IP address' instead of 'Use specific IP address'. I'm not sure why this worked as there was no IP address conflicts because there were no other devices connected to my router when I had problems, but it works for me, hopefully permanently
Good luck.
Try this. Its work perfect for me!
http://forum.xda-developers.com/showpost.php?p=10035476&postcount=10
I have my Tattoo rooted with 1.6 (can't recall the ROM name) with build number 1.67.405.6. Almost everything works fine except the connection with my home WiFi network. It's a PPPoE connection through ADSL modem. Next in line is the Netgear WG602 v3 WiFi router. At the beginning I couldn't connect at all so I changed the router's ROM to DD-WRT. Now I can connect with the router but no connection to the internet whatsoever. I can ping my router through my Tattoo, I can even open the 192.168.1.1 and mess around with its software but no connection to the internet. It is only limited to my Tattoo as I can connect through my laptop, through my other mobile (HTC S710) and also I can connect my Tattoo with any other WiFi (Secured or Open) with no problems at all.
I tried with no Security, with WEP, with WPA-PSK to no avail. Any other clues?
try running htc mail while you are using your wifi throuf your tattoo it worked for me
What is supposed to happen if I do that? I'm trying it as soon as I get home btw.
Nothing happened
Hi all...sorry for my interference but this problem is similar to mine.
I'm going mad from many weeks trying connect my Huawei Ideos (U8150) to my home wlan through a netgear VG602v3 AP. No way to do this.
Wifi works from my laptop and from my girlfriend's laptop, but from ideos it doesn't.
I turned off all wireless device in my house, I tried with/without WPA, I tried open network from channel #1 to channel #13, tried changing ssid and I also tried praying .
There is a weak wifi near here: it is on channel #1 and its power is between -89 and -82db. My wifi power (data from kismet) is between -50 and -18 db and is configured on channel #11.
In any cases, even if I put my Ideos near to AP antenna the story is ever the same:
- Ideos indentify the wifi network
- Ideos acquire the IP
- I open the browser or the android market and...
- Ideos lose connection...and so on.
I downloaded from work wifi (crypted with WPA) a wifi scanner from app store: it shows me the neighbour's weak wifi and my wifi network which appear and disappear recurrently.
Please, someone helps me (without suggest to buy another AP!!), any suggestions are welcome!!
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
I checked every setting to no avail. I still think somehow that my problem is with my router or adsl modem which doesn't connect automatically with PPPoE and Android doesn't have any command or software to initiate a PPPoE connection.
Other than that... Can't find any solution. Until then, I use connectify on my Win7 laptop. The thing is that I have to keep my laptop switched on as long as I'm in the house.
alpick36 said:
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
Click to expand...
Click to collapse
thank you for suggestion. I looked in depth but I did not found the option of which you were talking about. The unique solution still remains change the AP!!!
WiFi and Netgear Router
I think I finally found the answer. It appears Netgear routers support something called WiFi Multimedia. Its a QOS methodology. I disabled WiFi MM or WIMM as its sometimes called, as well as Internet QOS and all my problems connecting to web pages, the market, etc. through WiFi disappeared.
Strange that older versions of the ROM supported WIMM (or ignored it) and newer ones don't. But that solved the problem for me with no real degradation of performance on any of my other computers.
Good luck.