I updated my Galaxy S with Froyo 2.1.1 I900XXJPX by patching Kies.
Now I cannot use the device in 3g mode with Vodafone (it works with 3UK).
If i try and dial a number it just hangs on the dialing symbol.
To receive or make calls with Vodafone I have to set the device to GSM only.
I have used the option to set my CSC code to XEU , but still does not work.
Any thoughts ? (was fine before i flashed it).
Mark
Flash back to 2.2 or 2.1 and see if problem is still there.
Have you checked your APN settings?
You may have to reinput this data manually if its not there to make it work again.
You will be able to find the APN settings from the vodafone website.
Settings>Wireless and network>Mobile networks> APN.
APN settings link
Related
My debranded and unlocked white X10 got the Auto Interent Setting disabled so I have to enter the APN manually everytime i change sim card. My sister generic back X10 hasn't got this problem. IS there any way i can enable this function again? Thanks in advance!
Any help? I am having same issue. I just unlocked, and debranded to the NEW X10a version listed on esato Debranding Tutorial. I see the phone is debranded but the Auto Internet settings is still disabled. I could manually create APN settings but MMS doesn't work. I have R1FB001 and SEUS doesn't even see a newer version of 1.6.
Any help?
cannot make any outgoing calls/messages or receve them. the phone is unlocked to any network , if another sim is inserted it will get signal at all and if i search network providers and select the correct one the phone displays (mobile network not available ) message. i have tried 4 different working sims on different networks and tried switching from 3g to 2g and nothing. have tried a factory reset and nothing . I update my phone 2.2 to 2.3.3 and nothing. What i can do to fix my problem. When I call i get , go on internet i get this message mobile network not available !!!!!
If thats an update via Kies it should be correct CSC if its via Odin then its not the firmware for your area and network wrong CSC .
2.3.3 only released 15/4/11
jje
After factory data reset phone can't see GSM network and can't register. It says NO SERVICE. SIM card ok. check at another phone. What can be a problem and how to fix it?
Some info below:
fw: 2.1update1
baseband i9000xxjf5
kernel 2.6.29
build ECLAIR.XWJF7
csc i9000serjf2
p code: gt-i9000hkxbri
Have you checked your APN settings?
I can't make even phone call. APN...What to check in particular? wifi and gps are working fine. tried service mode... it says signal strength 0db.
My wifes is the same way it cant lock on a service provider after factory restore only way it works is with a custom rom cant figure it out
Contact your network and enter mobile network settings manually .
jje
flash to custom rom maybe?
it's your APN settings
just google your APN settings... i.e. i'm with Bell mobility... if I google Bell APN I will find the info I need... that data goes into settings>wireless>mobile networks>access point names
hit the menu button and add apn.... bell's examples are here http://androidforums.com/samsung-i7500/87145-bell-mobility-apn.html
they are carrier specific obviously
Hi All,
This happened to me before and I was as frustrated as you and when I was about to give up, I tried one last restoration, but only this time I did it correctly. After that, I restored 5 different versions of Samsung Galaxy S stock ROM back to my Samsung Galaxy S. One of these versions were Chinese, and everything was in Chinese.
Samsung Galaxy S had no signal was because the modem file was missing while you were performing the restoration.
Now, all you have to do is go to this page and follow the instructions to restore the Stock ROM back to your Samsung Galaxy S.
You can try to install a different rom just in case. I had the same problem and i tried to fix it applying different modems but that wouldnt work so i ended flashing cyanogenmod and back to another custom rom and that did the trick.
Even flashing back to the latest official rom for my country and operator.
Tapatalk
Hi, Just installed this ROM using the recommended kernel (percy_g2's CM#2). I've search for a bug related to data connections but seems It's only me. SIM card recognizes my provider and I can make/receive calls and sms, but using the data plan it's impossible, showing it's disconnected. Checked and unchecked the roaming option and still doesn't work. What are my options?
Reset apn settings to default or manually enter them - your provider can send you the settings
Phone settings
click more or wireless and network settings
Mobile networks
access point names
press menu button on phone
reset to default
Check the apn settings are present & correct for your provider or enter them manually
marcussmith2626 said:
Reset apn settings to default or manually enter them - your provider can send you the settings
Phone settings
click more or wireless and network settings
Mobile networks
access point names
press menu button on phone
reset to default
Check the apn settings are present & correct for your provider or enter them manually
Click to expand...
Click to collapse
Did it and didn't work. As far as I recall, in all other roms I have installed I never changed settings ain APNs, they were empty all the time. The phone automatically gets the connection to the carrier. It was all about enable or disable data.
I called my provider but they say the network itself should recognize you inmediatly.
I just flashed stock and it's working there but not in MIUI.
memop3 said:
Did it and didn't work. As far as I recall, in all other roms I have installed I never changed settings ain APNs, they were empty all the time. The phone automatically gets the connection to the carrier. It was all about enable or disable data.
I called my provider but they say the network itself should recognize you inmediatly.
I just flashed stock and it's working there but not in MIUI.
Click to expand...
Click to collapse
Iv always had my providers access point in my apn settings but may be different for others
The only other thing you can do is try a different stock rom firmware baseband
you can do this by flashing a different stock rom firmware via odin to what you are currently using
See dokys thread at top of dev section for a list of pre done flashable odin firmware or make your own with any latest firmware from sammobile.com using the splitter tool
marcussmith2626 said:
Iv always had my providers access point in my apn settings but may be different for others
The only other thing you can do is try a different stock rom firmware baseband
you can do this by flashing a different stock rom firmware via odin to what you are currently using
See dokys thread at top of dev section for a list of pre done flashable odin firmware or make your own with any latest firmware from sammobile.com using the splitter tool
Click to expand...
Click to collapse
Could flashing a different Percy kernel may work?
Hello again. I decided to buy 2 sprint branded phones. One came sim unlocked. I used the NV method on the other. On both I can place calls, but data says disconnected. The APN's were downloaded straight from the provider (att mexico). And I compared the apn setting with a working M8 with the same sim.
I have tried full reset, and changing prefered network type in *#*#info#*#* menu. All it does is say disconnected. Am I missing something?
Update: got it working by flashing a custom rom. I used viper (selecting unlocked version on carrier select screen)