[Q] MIUI v.3 Data Problem - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Hi, Just installed this ROM using the recommended kernel (percy_g2's CM#2). I've search for a bug related to data connections but seems It's only me. SIM card recognizes my provider and I can make/receive calls and sms, but using the data plan it's impossible, showing it's disconnected. Checked and unchecked the roaming option and still doesn't work. What are my options?

Reset apn settings to default or manually enter them - your provider can send you the settings
Phone settings
click more or wireless and network settings
Mobile networks
access point names
press menu button on phone
reset to default
Check the apn settings are present & correct for your provider or enter them manually

marcussmith2626 said:
Reset apn settings to default or manually enter them - your provider can send you the settings
Phone settings
click more or wireless and network settings
Mobile networks
access point names
press menu button on phone
reset to default
Check the apn settings are present & correct for your provider or enter them manually
Click to expand...
Click to collapse
Did it and didn't work. As far as I recall, in all other roms I have installed I never changed settings ain APNs, they were empty all the time. The phone automatically gets the connection to the carrier. It was all about enable or disable data.
I called my provider but they say the network itself should recognize you inmediatly.
I just flashed stock and it's working there but not in MIUI.

memop3 said:
Did it and didn't work. As far as I recall, in all other roms I have installed I never changed settings ain APNs, they were empty all the time. The phone automatically gets the connection to the carrier. It was all about enable or disable data.
I called my provider but they say the network itself should recognize you inmediatly.
I just flashed stock and it's working there but not in MIUI.
Click to expand...
Click to collapse
Iv always had my providers access point in my apn settings but may be different for others
The only other thing you can do is try a different stock rom firmware baseband
you can do this by flashing a different stock rom firmware via odin to what you are currently using
See dokys thread at top of dev section for a list of pre done flashable odin firmware or make your own with any latest firmware from sammobile.com using the splitter tool

marcussmith2626 said:
Iv always had my providers access point in my apn settings but may be different for others
The only other thing you can do is try a different stock rom firmware baseband
you can do this by flashing a different stock rom firmware via odin to what you are currently using
See dokys thread at top of dev section for a list of pre done flashable odin firmware or make your own with any latest firmware from sammobile.com using the splitter tool
Click to expand...
Click to collapse
Could flashing a different Percy kernel may work?

Related

Galaxy S - no signal

After factory data reset phone can't see GSM network and can't register. It says NO SERVICE. SIM card ok. check at another phone. What can be a problem and how to fix it?
Some info below:
fw: 2.1update1
baseband i9000xxjf5
kernel 2.6.29
build ECLAIR.XWJF7
csc i9000serjf2
p code: gt-i9000hkxbri
Have you checked your APN settings?
I can't make even phone call. APN...What to check in particular? wifi and gps are working fine. tried service mode... it says signal strength 0db.
My wifes is the same way it cant lock on a service provider after factory restore only way it works is with a custom rom cant figure it out
Contact your network and enter mobile network settings manually .
jje
flash to custom rom maybe?
it's your APN settings
just google your APN settings... i.e. i'm with Bell mobility... if I google Bell APN I will find the info I need... that data goes into settings>wireless>mobile networks>access point names
hit the menu button and add apn.... bell's examples are here http://androidforums.com/samsung-i7500/87145-bell-mobility-apn.html
they are carrier specific obviously
Hi All,
This happened to me before and I was as frustrated as you and when I was about to give up, I tried one last restoration, but only this time I did it correctly. After that, I restored 5 different versions of Samsung Galaxy S stock ROM back to my Samsung Galaxy S. One of these versions were Chinese, and everything was in Chinese.
Samsung Galaxy S had no signal was because the modem file was missing while you were performing the restoration.
Now, all you have to do is go to this page and follow the instructions to restore the Stock ROM back to your Samsung Galaxy S.
You can try to install a different rom just in case. I had the same problem and i tried to fix it applying different modems but that wouldnt work so i ended flashing cyanogenmod and back to another custom rom and that did the trick.
Even flashing back to the latest official rom for my country and operator.
Tapatalk

No network Available

I just flash gingerbread on my galaxy s once rebooted it doesnt recognize my network, I make a network scan but my network Claro Puerto Rico dont appear.
Any guess or help??
Check your APN settings, if backed up, restore, reboot
Sent using TCP/IP
Check your csc code by either
Download nitrality from market and then go to tools
or type *#272*your imei#
Changing csc will factory reset your phone..
@ Talon: since Spetember edition, *#272.... is not making factory reset, just reboot.
spamtrash said:
@ Talon: since Spetember edition, *#272.... is not making factory reset, just reboot.
Click to expand...
Click to collapse
You mean 2.3.5 onwards? ok thanks for letting me know.
Best to warn just in case though may not be on the latest yet
Yep, tested recently with JVR... no factory reset anymore
making things easier, isn't it?
EDIT:
originated from Click
I tried it on JVR, stock, odexed... worked without FR (speedmod kernel). Cf kernel, deodexed Ramad's ROM - worked without as well on JVS.
I'm not sure if some customized kernel/ROM will not cause the FR...
I just went to the phone company and they flashed from froyo to gingerbread 2.3.3 but still having problem the data icon stay still on letter E and start to flash on and off constantly.
When E flashes, it means, that EDGE network is available, but phone cannot connect to it. Usually, it means problems with APN settings.
Go to Setings - Wireless Networks - Mobile Networks and Access Points. You shall have some access points available. If not, try to ask your operator to send you setup sms or try so search on internet to find the setup rigth for your operator.
Sent from my GT-I9000 using XDA App

[Q] SGS GT-1900 odin issue

I'm trying to update my SGS GT-1900 to gingerbread with odin, i follow the steps correctly (Remove sim, put it into download mode, connect to pc with odin open) but odin doesn't recognise that the phones connected, do i need to install any drivers or such?
Yes, you need. Unfortunately, you have to install modem drivers. Or standalone, or just install KIES.
But then be careful, you have to: install KIES, reboot, kill two KIES processes running in background (or exclude it from startup via msconfig.exe), and after run Odin.
Standalone drivers should do the work as well...
its working with my friends galaxy s, but its taking a couple of hours and it still says 'setupconnection' is this normal?
no, there is communication error. Normal flash in Odin is 2-5minutes only.
Please look out the COM edit box change to yellow afte connecting.
if not change,
make sure you have installed the correct driver.
Try to reinstall again.
xtommydbx said:
I'm trying to update my SGS GT-1900 to gingerbread with odin, i follow the steps correctly (Remove sim, put it into download mode, connect to pc with odin open) but odin doesn't recognise that the phones connected, do i need to install any drivers or such?
Click to expand...
Click to collapse
Just install kies first, it will install all drivers needed to connect you galaxy S.
When connected to odin, you should see one of the white boxes turn yellow immediatly, this means you are ready to flash.
If everything fails, just copy the stuff to a USB and try on another PC, I've done it in windows xp 32 bits and win 7 64 bits, so I think you shouldnt have problems in most sistems setups.
managed to flash (pda: jvk Phone: jvk csc: jvk kor) everything works except the internet, kies wont alloow me to fix it.
xtommydbx said:
managed to flash (pda: jvk Phone: jvk csc: jvk kor) everything works except the internet, kies wont alloow me to fix it.
Click to expand...
Click to collapse
For data you will need to add back your provider's APNs. Go to
Settings->Wireless and network->Mobile networks->Access Point Names
You have to have the correct APN settings for your network here in order to use data. Search the forums if you don't know the settings for your network. There are several threads with network settings listed.
LiverpoolFCfan said:
For data you will need to add back your provider's APNs. Go to
Settings->Wireless and network->Mobile networks->Access Point Names
You have to have the correct APN settings for your network here in order to use data. Search the forums if you don't know the settings for your network. There are several threads with network settings listed.
Click to expand...
Click to collapse
can you link me to correct optus settings plz cant seem it find it, need net asap.
Or else just flash with the csc for ur country... If yes then type *#272*imei# and see whether ur country is selected...
Sent from my GT-I9000 using xda premium

GT-i9505 No mobile network/data after flashing custom ROM

Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
samersh72 said:
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
Click to expand...
Click to collapse
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
somepepe**** said:
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
Click to expand...
Click to collapse
and reflash the custom rom after flashing the modem
samersh72 said:
and reflash the custom rom after flashing the modem
Click to expand...
Click to collapse
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
going out now for a while but thought id ask - do you think that installing official stock rom (perhaps from your s4 unrooting guide) would help flashed via odin? from searching i can see that some folk suggest that stock will reinstall everything i need...im hoping so, i really wouldnt mind going back to stock, anythings better than this
somepepe**** said:
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
Click to expand...
Click to collapse
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
samersh72 said:
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
Click to expand...
Click to collapse
yes put it in "phone" mode, thats the second or third one i have flashed now so im not sure it wont help but for sure ill try again!
are you able to determine that its not corrupted? would it state as such if it were? im going to flash a stock firmware as a last resort. lost after that haha
edit - installed cwm using sgs4 flasher and re-installed my custom rom and gapps, booted no probs and network now working - sorted!! thanks for your help i dont think i would have reflashed the rom without your advice to do so
So I'm practically in the same boat. I'm currently on P.A.C. man nightly 09/18 (Vodafone Germany branded device). I never had similar problems, but now I can't call (or be called) and I'm not able to use mobile data.
I nearly tried everything:
1) I checked the IMEI (saved it before switching over to custom roms), but an IMEI number is still there.
2) Went back to stock to see if it's a problem of P.A.C. man ROMS or not. On stock it didn't work either.
3) Went back to P.A.C. man ROM and flashed modem XXUBMF8 via Odin 3.04 (from this thread: http://forum.xda-developers.com/showthread.php?t=2192025)
4) Flashed the modem again after I flashed the ROM because it didn't work either.
So I'm completely lost now, I really don't know what to do next. I had mobile data for a couple of seconds every now and then, but nothing stable. And since the problem came up (yesterday evening) I can not make any calls at all.
Can someone help me?
Edit: The very strange thing is that I have full reception balks in the notification area (only in grey). But still, I guess this means that the device is somehow able to detect a signal but can not connect to it?
Edit2: I apparently have no Device-ID. May that be a problem?
So I took some screenshots to show you guys my problem a bit better. For some reason my mobile data now works (currently HSPA, but it's extremely slow). But I still can't make any calls (or get called too). =/
Edit: So to sum this up: the strangest thing about this problem is, that even when I go back to full stock I can't make calls. =/ What could be the problem? An IMEI number is present in the settings (althouh the 'IMEI SV' under 'About phone' --> 'Status' was one digit below the current one that I can see under those stats). The whole problem makes me believe that my provider can't sort my phone number to my device (I'm on Vodafone; but if that's really the case: why the hell does mobile data works sometimes?!). The other possibility: something with the modem/radio is broken. Could this be the problem? The thing is that I also tried to flash a custom modem, but the problem is still there...
I'm really concerned that my phone just became an expensive paperweight
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer!
You also flashed a different modem didn't you? Did this help or was it only the custom recovery? I'm confused because I used CWM before and never had problems. But then this mess all came up...
Yes I flashed several modems, that didn't help..only using a different custom recovery to flash my custom Rom again helped..hope you get sorted!
Sent from my GT-I9505 using xda app-developers app
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Gotcher said:
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Click to expand...
Click to collapse
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
soyusado said:
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
Click to expand...
Click to collapse
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Install stock ROM
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Mate you should try installing Stock ROM that might help I think !
.::Alien::. said:
Mate you should try installing Stock ROM that might help I think !
Click to expand...
Click to collapse
I tried that already, but it didn't help. Same problem...
I factory resetted the phone, wiped cache and dalvik cache and then flashed my Vodafone branded stock ROM via Odin that I had on my device when I got it. Didn't help for some reason... But: should I also try to go back to stock ROM via KIES? I haven't tried this method until now...
Edit: About my flashing method: I went from the stock ROM to rooted (via CF Auto root with Odin). For PAC I then flashed TWRP 2.6.0 and then in recovery factory resetted the phone, wiped cache and dalvik and then installed PAC. After that I installed GApps. I used this method before and it worked without any problems...
Edit2: I found this thread, it appears to be the same/a similar problem with the S3: http://forum.xda-developers.com/showthread.php?t=1805709&page=6
Now is there something similar for the S4? I think I tried calling ##72786# on stock ROM and it didn't work...
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Delete the unused APNs.
Do you have mobile data?
Also I asume that you're running the latest vertigo's build, because with me GSM/WCDMA/LTE is always selected.
Sent from my GT-I9505 using Tapatalk 4
Sometimes I have mobile data, but only for very limited time; for the majority of time, I don't have mobile data and can not make calls.
I also tried to delete the unused APNs, but still no change =/
I tried to use a different Micro SIM in this device, but the same problem appears. No data, no phone although I have grey reception balks.
any update on this one?!

[SOLVED] Mobile Network not working

Hey everyone,
i had some issue with my note 3 after update from 4.4.2 stock rom to Touchwiz MM Port for Note 3
That ROM is perfect but the issue is bit too high:
My mobile network not working. The settings under mobile network are correct but it says "disconnected" for mobile network state under "About Device" -> "Status".
Then i tought I should update the modem, what I have done to new Baseband N9005XXUGPOK2
But the issue still exist
Should I update the bootloader also?
Thanks for the help in advance
Correct APN settings ??
JJEgan said:
Correct APN settings ??
Click to expand...
Click to collapse
Yes, corret settings have removed settings and add once again and double checked all information.
Nothing happend if I start mobile network.
For the modem and bootloader, I recommend updating both in tandem.
I will do flash modem and bootloader after work at home to see if it works.
First the modem flash and then the bootloader, or should I take both into Odin at same time?
Thanks
Solved the problem.
I´ve updated modem and bootloader, after that it wont go.
But I´ve tested a solution from my friend, he said I should go to the homepage from my provider and there can u put in your phone number and they will send u a SMS with a configuration.
After that my mobile network works.
That´s strange because the APN settings I manual put in was correct !?
tuxxx said:
Solved the problem.
I´ve updated modem and bootloader, after that it wont go.
But I´ve tested a solution from my friend, he said I should go to the homepage from my provider and there can u put in your phone number and they will send u a SMS with a configuration.
After that my mobile network works.
That´s strange because the APN settings I manual put in was correct !?
Click to expand...
Click to collapse
Hi can you please link to the files you used? Thanks!

Categories

Resources