Database Users

Semi bricked HTC Magic (Proximus) HELP NEEDED

Hi everybody,
Call me stupid if you like but....
I have a HTC Magic from Belgian telecomservice Proximus.
Some days ago I did the following.
- deleted all files from SD-card
- wrote down following:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005 (SAPP 10000)
CPLD-12
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
- ran the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
- RUU said: cannot find customer-ID
On this point my mobile was stuck on the RUU / USB screen
- I ran RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver
- RUU said: cannot find customer-ID
now my mobile says:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
Now I think (I'm a noob) my mobile is semi-bricked.
I tried to make a Goldcard, but couldnt because I cannot run adb.
I can run fastboot from AndroidSDK/tools
adb doesnt find devices.. fastboot finds my device.
Anyone who can help me? I would be really thankfull.

Ouch ouch, looks like its more than semi bricked for now. Since it updated your spl to a perfected one there isn't hacked yet. I'm afraid that the only thing there might save this phone is running another RUU your mobile will accept. You have to find one which got 1.76.0009 or higher cause the S=ON now
If this wont work the only hope will be a spl hack will be released and will be done through fastboot.
But most of all it sounds like the best thing there could happen is that your warranty is still valid and they will replace it for you.
Anyway, don't take my words as 100% cause i'm no expert on this matter!!!
If you dare to try to flash another spl/radio through fastboot look at this: http://forum.xda-developers.com/showthread.php?t=605239
BUT, as your new spl is perfected it will most probably not work and ruin the possibility to use fastboot.
Maybe and just maybe, it will be easier to get a replacement if it's fully bricked and it's impossible to get into fastboot and recovery.

Thanks already for the fast answer.
Let me try your suggestions first.
Warranty will not be provided I assume.

I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!

radjagios said:
I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!
Click to expand...
Click to collapse
Try to wait a little while, like i wrote i'm not an expert on this matter.
Maybe if you're lucky someone will drop by with a solution for it. But to be honest, i wouldn't keep my hopes up
And sorry didn't follow the thread, don't have any links for RUU cause i'm not really sure which you should use.
But if Belgium got the update which include HTC sense, i guess that would be the right one.

I found a solution to my problem.
Here's what did I do.
hxxp://forum.xda-developers.com/showthread.php?t=656798

Got the exact same issue.
Tried the goldcard with the sandisk 2GB, but with an usb adapter. (I read the card should work)
I could do everything in the goldcard tutorial but when inserting the goldcard in the phone nothing happens at boot or when pressing the recovery keys at boot.
It jumps right away to versions screen.
The strange thing is though. Once I inserted the sd card in the phone, I can no longer use it on the PC (please insert media). Which I could do before.
When inserting the sdcard on another magic phone, it's working fine.
Going to get a Kingstong 2GB with sdcard adapter in the mean time and try it in the pc's card reader.
(HTC Magic 32A)
It really sucks Proximus sells android phones you cannot update. What's the use to have open source software then?
I also wander why the RUU update went wrong, once you root the phone is should work no ?

hmmm, I Read on this forum there is no fix for the 1.76.0009
h**p://forum.xda-developers.com/showthread.php?t=548218&page=27
radjagios, can you confirm the goldcard is working for this?
You have any useful info like sappimg version you have put on it?

[Q] [HELP] HTC Magic 32A bricked i think...

hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,

NOT DEVELOPMENT RELATED
iondarie said:
hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,
Click to expand...
Click to collapse
NOT Development related​
Moving to General.
Please be mindful of where you post your inquiries. The Development sub-forum is reserved for developers with contributions ONLY!
Thank you.

Make goldcard and flash again.

Hi
my device screen shown hexagonal on chips,like your device ,stuck on RUU USB,
last time i ask anybody here what i can do..i didn't found ..
nothing we can do as long as we have a root,
if you have a root you can
fastboot oem rebootRUU.
or tell us your
fastboot oem -h ,screen..
Now i can fix my phone by myself. i got JTAG ,and built my own ,
just only JTAG can works,God save my phone..

Man you dont need jtag!!!Dont pay for this situation!Just find an original Signed RUU and flash like nothing happens.Or create goldcard from another android phone.!

yes if
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..

awebagar said:
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..
Click to expand...
Click to collapse
His phone is not MT3G v1.2 or Fender, his phone is common HTC Magic 32A, so he need create goldcard and flash RUU again
His first attempt was wrong cause every official ROM checks CID on phone. If phone's CID is not equal with ROM CID then update will fail. RUU updated hboot and radio and failed at CID-step and locked in RUU-mode.

Fastboot FAILED... (remote: not allowed) problem!!

Hello everyone!
I need help with my phone ASAP. I recently tried to get Ginger Yoshi 1.5 on my phone but I needed to change my Spl and radio to 1.33.2010 and 3.22.20.17. I managed to change them both but that's when everything started going bad. When I changed them my phone went from 32A to 32B, at that moment I thought something had went wrong so I flashed back my Spl to what I think it was the stock Spl 1.33.0013. After that it went back to 32A but the radio remained 3.22.20.17. I havent changed it back or anything because now my phone is kinda bricked. I only have access to fastboot\hboot screen, but when I try to flash something it wont let me saying "FAILED (remote: not allowed)". If I try to update Hboot mode it says "Model ID incorrect! Update Fail!".
I have been searching for a solution but I haven't seen anybody else with my spl and radio combination. I'm starting to give up hope on my phone . I don't know what to do anymore. I need some help.
Yes, I'm a newbie at this. I think this is my third time changing a ROM.
Thanks in advanced for any help and/or advice!
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
OCT 21, 2009, 22:33:27

Do you have access at android?If yes try rooting and flash custom recovery.Then flash from recovery new unlocked Hboot.

nikosdd said:
Do you have access at android?If yes try rooting and flash custom recovery.Then flash from recovery new unlocked Hboot.
Click to expand...
Click to collapse
Hi there! If by that you mean if I can actually boot a ROM then I can't, it stays in the HTC Magic screen. Or if you mean if I can get adb connection with cmd I can't also because it does not recognizes my phone. All I get access to is fastboot and hboot, though it doesn't work either.. I try to flash a new radio, spl or recovery image but it does not works. Maybe I need a new goldcard? Since it says model ID incorrect.
Thanks for your help!

Your phone is MyTouch 3G v1.2 with audiojack 3.5" and it is NOT common 32A. Don't use manuals for Magic 32A.
You flashed wrong combo and it is main problem. May be this manual will help, but i have no guarantee
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
p.s. Megaupload links are dead cause US District Court shutdowned this site)
http://www.4shared.com/zip/hW3I1tfT/MyTouch35RootingFiles.html
http://www.4shared.com/zip/ALht1xbT/unlockr_Sappimg_mt3gv12.html
p.p.s. And you need goldcard. Must have goldcard to flash special sappimg.zip
Tech reasons of solution:
- you have perfected HBoot and can't flash anything by 'fastboot flash' command
- you have wrong radio (combo, cause hboot and radio must be together)
- if you will flash special sappimg.zip you will have 1.33.2010 s-off eng hboot. With this hboot you can flash your stock combo back (and don't forget about custom recovery for mt3g v1.2)

Yes my phone is the Fender LE. I found out that even though they say 32A they're actually 32B as well. What a way to get confused. And as you said, some links are broken because of megaupload no longer existing . I couldn't find the files that I needed. My phone is now fixed running Cyanogenmod 6.1.0 (I gave up trying to flash ginger yoshi, I don't lke the idea of having to change spl and radio).
After I found out what I had to do to fix it I thought that it wasn't so big of a deal, just flash a sappimg file with a diferent Spl and that is it, S-off and an Eng spl.
Though when it said "Model ID incorrect" I had no idea why that happened. I had to open the Hex editor again an re-edit my Sd card's code with the goldcard I had created before. After that everything went back to normal, I flashed CM6 and now my phone is up and running like a charm!
I've seen some other users with the same problem I had, maybe if someine would explain them what they need to do to fix it would be a good idea.
Thanks for explaining! And for the links.
This is what I now have:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.xx.xx (I forgot the last 4 numbers )
Running CM6.1.0

Now can not download the Stock rom with root for MT3G 32A 1.2 because all the link are dead. Could you please give a helping hand?
Thank

See if you find the rom in this link.
http://shipped-roms.com/index.php?category=android

Thank you,
but still can't

[Q] Sapp310 32 A Can't exit Ruu mode

I used to rooted and unlocked this phone. And installed a rom. Then I think I installed a wrong HBOOT or a radio and it bricked. I tried to debrick but it didn't work. Then I put the phone aside for a while. Now I want to make it work again. I did a lot stuff on it that I don't remember. Now phone starts in RUU mode.
I'm a noob so I don't know every commands or how these things work so I followed some guides but I've got errors every time. Is my phone bricked totally? Is JTAG necessary? or is there a way to get out from RUU mode and install correct HBOOT and RADIO? or if those correct than what am I doing wrong? This is a My Touch 3G T-mobile. And it says Sapp310 under the battery and there's an A next to barcodes. I don't know if it means 32A or not.
Recently the phone has
------------------------------------
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP31000)
CPLD-13
RADIO-6.35.08.29
Nov 3 2009, 15:56:29
RUU
-------------------------------------
Please help me and guide me to fix this phone. Thank you.

[Q] HTC Magic bricked ? blocked on RUU USB screen ; S-ON ; Changed 32B to 32A

Hey guys !
I tried to repair my HTC Magic 32B (Vodaphone) and put the CyanogenMod 6.1. After some stupid tests I think I brocked my phone. By the way I installed a 32A version...
The RUU screen is the only one availible. This is what I can see :
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-10
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
I can use some fastboot commands.
I can't access to the recovery screen. I can't flash any image.
I can't use ADB, so I can't change the S-ON to S-OFF.
If I launch the RUU updater there's a freeze at 81% on a step (famouse problem because of a wrong SPL or Radio version I don't really remember).
I created a goldcard with another androphone, if it can be helpfull...
I hope somebody can help me I'm really disarmed...
Regards.​PS : Sorry if there are some mistakes in my sentences I don't speak english very well and I do my best.

LOL :laugh: you are trying to change thing which are never made to change, you definitely need a RUU, flash the Vodafone 32b RUU and read before you proceed don't download wrong file or else your phone will be useless.
RUU link
i use ruu once a month for my device lol best of luck

Yeah I ever tried to install a RUU update 32B voda (In my case 1.91.163.1 Vodafone France DRC92) but there is a bootloader error.
hxxp://lightpics.fr/images/3/mPEWt.png
(juste replace hxxp by http, you know...that antispam security)
But if I try with a 32A version (like xxx.4shared.com/file/ 203189441/59bd18ab/RUU_Sapphire_HTC_Europe_305401.html) there is that freeze at 81% at the "System Update" step.
(replace xxx by www)
Thanks for replying I think this is a kind of tricky problem.

ya it is tricky, the hboot info u have provided looks messed up, so can you tell me your stock hboot detail, then I can help you better.
1: which board it 32A or 32B?
2: which brand it is google (G) or HTC (H)?
3: and radio and hboot?
your radio is of Rogers Canada WWE (RUU), your spl is of three different RUU
---------- Post added at 01:05 AM ---------- Previous post was at 12:38 AM ----------
I found one RUU for your device of which spl and radio is same :cyclops:, as the one you mention but only its board is 32A.
RUU no. :
38) [xda-ftp] [4shared] 3.05.631.7 Rogers Canada WWE
use find(Ctrl+F) feature of your browser to easily locate it
see if it works :fingers-crossed:

Woah..I changed many things, including HBOOT, so yeah I don't really remember the default configuration.
The default configuration is a HTC Magic 32B "with Google", not Roger.
I'm not 100% sure but I think the HBOOT version was something like 1.33.xxxxx
I can't remember anything else.
Edit : You edited your post while I was posting mine. Should I follow your instructions anyway ?
Edit 2 : I don't wanted to wait so I downloaded and launched the RUU you recommanded to me but I still have the same freeze problem at 81% during the system update...damn
Edit 3 : I checked the default CID with a fastboot command and the CID is VODAP203 (seems logic because my phone is from a french operator). After a search on Google the HBOOT version corresponding is 1.49.xxxx

hmm.... I have experienced the problem you are facing and correct RUU is the only option. I am from India and my magic is shipped from U.S., I have to flash the U.S. version RUU and not the Indian one, may be you are also experiencing same problem. I hope your battery is okay and even your usb besides don't any USB hubs or USB spliters make sure there is a direct connetion between your phone and PC (some USB hubs are slow so a conflict might occure) just to be safe.

sorry for replying late, see if this works for your device, you will require a goldcard for this http://forum.xda-developers.com/showthread.php?t=548218
also tell what is your main version

satanic666 said:
sorry for replying late, see if this works for your device, you will require a goldcard for this http://forum.xda-developers.com/showthread.php?t=548218
also tell what is your main version
Click to expand...
Click to collapse
I can't access to the bootloader screen, only the RUU screen so I can't update the sappimg.zip.

for starting the ruu process, turn off your device, manually press back+power key to load fastboot while your phone is connected to PC, then in cmd go to place where you have placed ADB then type
Code:
fastboot devices
you see a device in the list then proceed with the running RUU (currently i m assuming you know about using adb )

The command returned the string : HT93SKF07033
Thank's for replying again.

satanic666 said:
hmm.... I have experienced the problem you are facing and correct RUU is the only option. I am from India and my magic is shipped from U.S., I have to flash the U.S. version RUU and not the Indian one, may be you are also experiencing same problem. I hope your battery is okay and even your usb besides don't any USB hubs or USB spliters make sure there is a direct connetion between your phone and PC (some USB hubs are slow so a conflict might occure) just to be safe.
Click to expand...
Click to collapse
hi i am from india i too have the same problem i receive the message on screen sapphire pvt 32a ship s-0ff
hboot- 1.76.009 (sapp*****)
cpld-10
radio-6.35.08.29
dec 8 2009, 17:38:48 plz help and tell the perfect ruu which will work

rs32323 said:
hi i am from india i too have the same problem i receive the message on screen sapphire pvt 32a ship s-0ff
hboot- 1.76.009 (sapp*****)
cpld-10
radio-6.35.08.29
dec 8 2009, 17:38:48 plz help and tell the perfect ruu which will work
Click to expand...
Click to collapse
what is your uid when you check it under adb??
Sent from my Dream/Sapphire