hi guys, i had done some mistake.
after i upgrade 2.1 to 2.2 official rom i found tat my hp was locked.
so i decide to root the phone
i follow the procedure in www.theunlockr.com
after i done at adb i wanna start to superboot.
when i at fast boot mode i plug in my usb cable and run a ‘install-superboot-windows.bat’ (2.1 build not same with me)
now my phone stuck at o2 logo and keep restart.
i reali no idea on this. can anyone help me ??? please!!!!!!!
i cannot in recovery mode.... any one can help ??? please
Related
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help
If it is realy a brick without any chance of life I need a part of it: the keypad.
Thats really rude.
not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen
All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.
Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.
Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.
Hello everyone
I read almost all posts about “dead atom” and “6815 dead” - but don't find any similar problem.
Yesterday I flashed new rom WM6.5 by USB cable - and something goes wrong, maybe cable is broken.
Now when I put battery to device, It automatically turns on bootloader screen.
I was trying to flash rom by sdcard but It doesn't work - I wait 10-20min and bootloader screen blinks two times and again about 10-20min bootloader screen blinks... over and over again...
My bootloader is damaged???
Thanks for any response,
____________________
Problem resolved:
sdcard was a problem, when I change sdcard device flashed OK....
Don't worry guy!
Don't worry guy. If your device can boot into bootloader you can try to flash rom v 1.00.03 from hp site or in this site.
hi
the rom v 1.00.03 is not on this site. How can i update it if the file is .nbf ... yo bot in bootloader with sd or dsuu mode u have to have the .nb0... please i have the same problem and i have 3 days of diferent methods of flashing...
The same problem. The RW6815 goes to bootloader screen again and again. Bl. ver.1.0.5.
Anybody can help me?
hello i have in hand a htc tatoo who only restart and show TATOO and restart again , any help please ? thx
Try out flash boot.img if not work restore nandroid backup or install new ROM
please im newbee can u post here a method thx
You can find all info you need here:
http://forum.xda-developers.com/showthread.php?t=821004
the phone is just stuck in a boot-loop; first try to do a wipe from the recovery if the problem persists .. install a new rom.
I hope to check out was useful to you.
click thanks please
acore.process.stopped
Hi,
When I turn on my tattoo it goes to aeroplane mode and then acore process stopped. Any advice?
to be honest booting in TATTOO only is the best ; take less time and doesn't drain the battery
Connect your phone with PC via USB. Enter the recovery, and place boot.img file on your SD card.
Re-install ROM and it should boot up with in no time.
hey guys im new here so bare with me...
i have a problem with defy , the story start with miui that i try to install and the cable went off during the install, since than i cant flash .
the battery is dead and i couldn't go to boot loader, somehow i mange to turn the defy on with the McGravier method , and the only screen i can see is the boot loader , the rsd lite revile the phone but any flash that i try to install finish with error code like this, error verifing code group 33/39 and ect' .
i try any sbf rom from virsion 2.1 to 2.21, 2.2.2, 2.3.3, 2.3.4 and i try to install and flash the phone on any windows xp vista and win7 ,and on a diffrent pc ,why its always finish with fail in the rsd program its mange to go to 100% and than its fail all the time.
plz help im hopeless
thanks
Where did you buy your phone?.
What was your original rom?
hey , i buy my defy in israel and the virsion was 2.1 with modifiction of opertor like virizon - in israel its call cellcom , what to do ? what version i need to install ?
help anyone ?
I know you said that you cant get any other screen but...
Can you get into recovery menu?
Remove Battery, Press VOLUME DOWN and POWER and then plug in the battery. ( HOLD THE BUTTONS!) after a while , an android with a warning triangle shoud appear.. maybe try wiping ? ( if you can )
hi ; thanks for the help man , but i cant get into recovery mode i try your way and nada
i found the rom that i try to flash for the first time for miui maybe it will help u ?
JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf.gz.crdownload