Is there a gapps file for the droid 2 that can be flashed?
Related
Hi,
I recently bought a refurb Defy and was trying to install android 4 on it. I have gone through the forum but i am confused what to do.
I have rooted my phone using Superoneclick. I have installed ROM Manager from app store. But now i am stuck.I am reading posts but i am getting confused as to what to do.
The following are the defy details
Cam -Bayer
Android Version 2.2.2
Kernel Version 2.6.32.9-ga28fcc4
BuildNumber JOREM_U3.4.2_177-3
Can anybody please help me simple steps as to how to install android 4
Follow a guide on how to instal CM7 but replace the zip file with the one from a CM9 build (for the defy, not the defy+)
Sent from my MB525 using XDA
Install guide (courtesy of nogoodusername):
A How to on flashing ICS(Defy Plus Builds)
1:Head over to Stable Recovery from boot menu
2:Wipe Data (Nandroid Backup Before Doing this [optional])
3:Install Zip from SD
4:Select ur ICS(DefyPlus) zip
5:FLash
6:Flash CM9 Kernel
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Clear Cache and Dalvik Cache
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash CM7 Kernel
7:Clear Cache and Dalvik Cache
FIrst Boot will take some time...
TO CLEAR YOUR CONFUSIONS ABOUT GB KERNEL ICS AND FROYO KERNEL ICS
I have seen lot of confused user out there asking about which kernel to flash and stuff... So here u go read below...
So our beloved Awsome Developers make two types of nightlies
1-For DefyPlus(Can Also be used on Defy(RedLens))
These are the GB/CM9 kernel builds
These are found under /cm9-nightly-defy+/ folder of the servers which we have
To install these you need to follow the TuT to install ICS Defy Plus Above...
Green Lens Camera Wont work on these(Correct me if I and wrong)
2-For Regular Defy(Do not work on Defy plus)
These are Froyo/CM7 kernel Builds
These are found under /CM9-Nightly-Defy/ folder of the servers which we have.
To install these follow the TuT to install CM9 ICS FOR Defy stated above
3-Well there is no 3rd build(There is The MileStone2 Port by Walter79,But now that we have camera on our builds that one is not usefull...)
Click to expand...
Click to collapse
Basically, as labsin said, you can follow the same steps of CM7 flashing guide, but changing the build with an CM9 one and adding the correct kernel. In your case, you can choose which kernel to use, because Bayer Defy is compatible with both Froyo and Gingerbread kernels.
Questions go in the Q&A section
So I installed a custom rom (Dream Fuson V1) for the first time in galaxy y duos s6102 yesterday. Everything was going fine until I mistakenly installed the OTA update zip file using cwm, while I was supposed to install it using the stock recovery. So, the new features I was supposed to get after installing the update isn't there. Now my question is, can I simply install the update using stock recovery or should I first clear cache and dalvik?
Thanks in advance.
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles
Hey guys, what's the best way to upgrade a nightly of the same ROM? I'm specifically talking about Coldbird's CM13 here. What should I wipe first on TWRP before flashing the zip?
Hey xda peeps. I'm new to the site and wanting to upgrade my note 3 roms but having some trouble getting custom roms installed.
First of all my phone specs.
SM-N9007 galaxy note 3
Ver. - 5.0 lollipop
Base - N007DIUGBOI1
KERNAL - 3.4.0-6104449
[email protected] #1
BUILD - LRX21V.N9007DIUGBOJ3
SE STATUS - Enforcing - SERP_SM-N9007_5.0-1_0039
S0V - MDF V1.0 R4 - VPN V1.4 R4.1
These roms are for the n9005 5.0.
I have tried full system wipe/dalvik cache and for a fresh install but does the same thing.
All help is much appreciated.
Thanks
Tasks performed,
Rooted
TWRP RECOVERY
(XPOSED FW won't work due to odex files) - Have tried looking for a compatible guide to deodex my stock rom but have stuggled to get a working one.
Tried installing 2 ROMS
Audax
0mega
Darkwolf
TWRP install zip doesn't flash rom it saying Can't find md5 file or checking for MD5 then after 20seconds it lists aroma 2.4xx installing files then freezes which writes the Rom name and then stops and reboots to recovery
I'm on day 5 browsing google and xda guides to get this custom rom and exposed installed but have had no luck.
Just wondering if the zip files corrupt or TWRP is not working?
Sorry in advanced if you get this all the time which after 5 days im reverted asking the community for guidance
Sorry for not being able to provide help as I am a noob aswell, but how did you get the custom recovery (team win) to work on your phone? I have the same model and it seems very rare. Did you flash a sm-n9005?
Sorry if I misunderstood anything I am a noob!
Thanks!
Who are you asking the 2016 poster or an even older post ??