Hey xda peeps. I'm new to the site and wanting to upgrade my note 3 roms but having some trouble getting custom roms installed.
First of all my phone specs.
SM-N9007 galaxy note 3
Ver. - 5.0 lollipop
Base - N007DIUGBOI1
KERNAL - 3.4.0-6104449
[email protected] #1
BUILD - LRX21V.N9007DIUGBOJ3
SE STATUS - Enforcing - SERP_SM-N9007_5.0-1_0039
S0V - MDF V1.0 R4 - VPN V1.4 R4.1
These roms are for the n9005 5.0.
I have tried full system wipe/dalvik cache and for a fresh install but does the same thing.
All help is much appreciated.
Thanks
Tasks performed,
Rooted
TWRP RECOVERY
(XPOSED FW won't work due to odex files) - Have tried looking for a compatible guide to deodex my stock rom but have stuggled to get a working one.
Tried installing 2 ROMS
Audax
0mega
Darkwolf
TWRP install zip doesn't flash rom it saying Can't find md5 file or checking for MD5 then after 20seconds it lists aroma 2.4xx installing files then freezes which writes the Rom name and then stops and reboots to recovery
I'm on day 5 browsing google and xda guides to get this custom rom and exposed installed but have had no luck.
Just wondering if the zip files corrupt or TWRP is not working?
Sorry in advanced if you get this all the time which after 5 days im reverted asking the community for guidance
Sorry for not being able to provide help as I am a noob aswell, but how did you get the custom recovery (team win) to work on your phone? I have the same model and it seems very rare. Did you flash a sm-n9005?
Sorry if I misunderstood anything I am a noob!
Thanks!
Who are you asking the 2016 poster or an even older post ??
Related
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles
Hi everyone. My SM-G7102 came with the following:
Android version:
4.3
Baseband version:
G7102XXUAML5
Kernel version:
3.4.0-2671946
[email protected] #1
Tue May 13 21:33:27 KST 2014
Build number:
JLS36C.G7102XXUANE2
SE for Android status
Permissive
I have flashed cwm based custom recovery and rooted using SuperUser 2.02. Everything is working fine.
[ Earlier, I had tried, Twrp and Philz recoveries, but they just gave me blank screen and reboots to system.]
I did a full nandroid backup today using my working cwm based recovery, on External SD Card directly.
I want to try out VANDROID ROM V1 by vandroid699. It says it is "E2 Stock Based ROM". My guess is that this is compatible with my device and its Jellybean 4.3.
I am also aware of the fact that once I upgrade the android version on my device, there is NO DOWNGRADING WITHOUT BRICKING THE DEVICE.
Please anyone confirm:
1. Is it OKAY to go for the Vandroid ROM V1 without having any problems?
2. Will I be able to do a "Nandroid Restore" if something bad happens?
3. I have also downloaded from Samsung update website this file "G7102XXUANE2_G7102OJVANE1_PAK.zip". It contains the Tar.Md5 file which is Odin-flashable.
Is it the RIGHT STOCK ROM FOR MY DEVICE? [btw, I am from Pakistan]
Thanks in advance
N.B: I have experience with Nexus 10, Nexus 7 2013, HTC HD2, in terms of flashing roms, kernels, nandroids, but I am new to Grand 2!
mfaisal98 said:
Hi everyone. My SM-G7102 came with the following:
Android version:
4.3
Baseband version:
G7102XXUAML5
Kernel version:
3.4.0-2671946
[email protected] #1
Tue May 13 21:33:27 KST 2014
Build number:
JLS36C.G7102XXUANE2
SE for Android status
Permissive
I have flashed cwm based custom recovery and rooted using SuperUser 2.02. Everything is working fine.
[ Earlier, I had tried, Twrp and Philz recoveries, but they just gave me blank screen and reboots to system.]
I did a full nandroid backup today using my working cwm based recovery, on External SD Card directly.
I want to try out VANDROID ROM V1 by vandroid699. It says it is "E2 Stock Based ROM". My guess is that this is compatible with my device and its Jellybean 4.3.
I am also aware of the fact that once I upgrade the android version on my device, there is NO DOWNGRADING WITHOUT BRICKING THE DEVICE.
Please anyone confirm:
1. Is it OKAY to go for the Vandroid ROM V1 without having any problems?
2. Will I be able to do a "Nandroid Restore" if something bad happens?
3. I have also downloaded from Samsung update website this file "G7102XXUANE2_G7102OJVANE1_PAK.zip". It contains the Tar.Md5 file which is Odin-flashable.
Is it the RIGHT STOCK ROM FOR MY DEVICE? [btw, I am from Pakistan]
Thanks in advance
N.B: I have experience with Nexus 10, Nexus 7 2013, HTC HD2, in terms of flashing roms, kernels, nandroids, but I am new to Grand 2!
Click to expand...
Click to collapse
Well its just an E2 stock rom flashable zip nothing extra like s5 apps or anything just Samsung bloatware removed ( i haven't tried it ) ...if u want another rom try Gennxt Rom by ballibro and yes the nandroid backup will restore everything and you can flash the firmware you mentioned ...
kuldude said:
Well its just an E2 stock rom flashable zip nothing extra like s5 apps or anything just Samsung bloatware removed ( i haven't tried it ) ...if u want another rom try Gennxt Rom by ballibro and yes the nandroid backup will restore everything and you can flash the firmware you mentioned ...
Click to expand...
Click to collapse
Thanks for you response
mfaisal98 said:
Thanks for you response
Click to expand...
Click to collapse
Welcome bro...[emoji4]
Hi, I'm thinking of installing CM11 ROM on my Samsung Galaxy S5 would like to know what is the best way to install this ROM step by step and if I get tired of this ROM and back to the original ROM I hope you can help me please thank you very much
Kurthval said:
Hi, I'm thinking of installing CM11 ROM on my Samsung Galaxy S5 would like to know what is the best way to install this ROM step by step and if I get tired of this ROM and back to the original ROM I hope you can help me please thank you very much
Click to expand...
Click to collapse
theres instructions on rom flashing by reading the dev section. happy hunting
Thinking about flashing cyanogenmod myself. What i am unsure on is, do i need a recovery to flash it or can it be done through odin so the knox isn't tripped? Any help would be appreciated.
1 Read the corresponding official CM threads.
2 Wrong section. Should be in Q&A.
Good luck
itsadogslife said:
Thinking about flashing cyanogenmod myself. What i am unsure on is, do i need a recovery to flash it or can it be done through odin so the knox isn't tripped? Any help would be appreciated.
Click to expand...
Click to collapse
Hi,
In order to CyanogenMOD you will need to do the following :
Root the device and install a custom recovery
download the cyanogenmod zip file from the right thread
you will also have to install the relevant GAPP's folder (normally listed on the CyanogenMOD thread)
Boot into recovery mode
Do a wipe of the device and then install the cyanogenMOD zip file
Wiat for that installation to complete
Install the GAPP's Zip File
Reboot and Enjoy CyanogenMOD goodness !
* Any Issues you Encounter by following these basic instructions are not my fault even if your phone explodes and causes a nuclear power plant meltdown. *
The main question is, will it trip knox?
Hi guys, I'm just wondering if there are any recent 5.0+ TouchWiz based roms that come with Xposed already built in? I have tried so many times to get it to work on my current rom but when flashing the framework zip, I just get errors. So if anyone could recommend a rom it works with or can assist me in getting it to work. It would be much appreciated.
Thanks . Dale.
Current phone and Rom information:
Samsung galaxy S5(SMG900F)
5.0TwiistedRom v7
Philz Recovery
Hello,
so at this moment i got stock 5.0.1 rooted but i get crashes sometimes [cuz of towelroot i think] so i want to get something more stable.
Question is : can i install ROM's for i9505 ?
I got one requirement - Viper4Android must work
I found this ROM's interresing will they work on my phone? :
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-super-wizcyan-29-nov-15-t3259562
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-crdroid-t3017844
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-resurrection-lollipop-v5-5-5-t3195202
I think you need a special kernel for the I9505 roms to work on the I9515.
You can find more info here.
I would be careful.
You could also flash back to stock, flash TWRP, and install supersu from TWRP.