So I installed a custom rom (Dream Fuson V1) for the first time in galaxy y duos s6102 yesterday. Everything was going fine until I mistakenly installed the OTA update zip file using cwm, while I was supposed to install it using the stock recovery. So, the new features I was supposed to get after installing the update isn't there. Now my question is, can I simply install the update using stock recovery or should I first clear cache and dalvik?
Thanks in advance.
Related
Helo all,
Since my fisrt custom ROM, OXYGEM, my carrier name changed, even now, when i'm using the Aurora ICS rom from DZO, after installing the previous stock roms, the carrier name is not the one that was supost to be.
My girlfriend has the same phone. she was using the stock rom yet. I installed the Aurora ICS and the carrier name is right!
Do you know how can i overwrite tis problem? there's a file or something that I can copy from her phone.
Tanks
I suggest you to install official 2.2 or 2.3 to restore sytems to normality.
than you just root and instal CWM and custom rom again.
To install custom cum you can skip the root part off course...
Xourisso69 said:
I suggest you to install official 2.2 or 2.3 to restore sytems to normality.
than you just root and instal CWM and custom rom again.
To install custom cum you can skip the root part off course...
Click to expand...
Click to collapse
To install the Aurora ICS ROM i had to downgrade to stock 2.2 and install the 2.3 official rom!
So, i gues it doesn't resolve the problem! =/
Recently i had flashed to [CUSTOM][ROM][ICS/Jelly Bean mod] NextToICS ROM v2.0 Galaxy Y |Jelly Blast|[Updated]
http://forum.xda-developers.com/showthread.php?t=1679563 .But the interface is not good nd the icone are too small.Know i wanna flashed to ather rom like creed nd all.but m enable to flash...the flashig process is shown completed.but when i reboot it it i still have the same rom. i tried several times but unsuccesfull.i even tried with latest clockword mod but unsuccessful..so plzz suggest me friends wht to do ..i don want this rom..plzz any suggestion..
Thank you.!!!
nileshpandey84 said:
Recently i had flashed to [CUSTOM][ROM][ICS/Jelly Bean mod] NextToICS ROM v2.0 Galaxy Y |Jelly Blast|[Updated]
http://forum.xda-developers.com/showthread.php?t=1679563 .But the interface is not good nd the icone are too small.Know i wanna flashed to ather rom like creed nd all.but m enable to flash...the flashig process is shown completed.but when i reboot it it i still have the same rom. i tried several times but unsuccesfull.i even tried with latest clockword mod but unsuccessful..so plzz suggest me friends wht to do ..i don want this rom..plzz any suggestion..
Thank you.!!!
Click to expand...
Click to collapse
did u wiped cache n data?if yes,then go for format system,data,cache options n then go for mount system,data,cache options n flash ur required rom nw.if that evn doesn't helpd u.I'm sori.ask any other.
You have to wipe cache and data, than, to be sure, install stock rom, and then creed.
nileshpandey84 said:
Recently i had flashed to [CUSTOM][ROM][ICS/Jelly Bean mod] NextToICS ROM v2.0 Galaxy Y |Jelly Blast|[Updated]
http://forum.xda-developers.com/showthread.php?t=1679563 .But the interface is not good nd the icone are too small.Know i wanna flashed to ather rom like creed nd all.but m enable to flash...the flashig process is shown completed.but when i reboot it it i still have the same rom. i tried several times but unsuccesfull.i even tried with latest clockword mod but unsuccessful..so plzz suggest me friends wht to do ..i don want this rom..plzz any suggestion..
Thank you.!!!
Click to expand...
Click to collapse
My suggesion is just change your current kernel and then change the rom. But dont forget to wipe data and dalvik cache. It will work..
Sent from my GT-S5360 using xda premium
Change the kernel before installing another rom.
or flash stock rom via odin and then change the kernel or rom
mount the system,
im sure you forgot about that
it might sound redundant but i'm telling you flash a stock rom via odin first then flash your desired custom rom.
if you have a problem with odin look at the "all you need to know(sgy basics)' thread or sgy for dummies, if i recall it right.they have some tuts there
about odin flashable stock rom look for sir docky's thread (its a real life saver), i recomend DXLC1
ibelive there is a link to that thread in the threads a said earlyer.
lastly i advise you to take sometime to read user's feedback on any custom rom you chose, because frequent changing of roms is not very comfy, and maybe they might have some fix to your problem with their rom.
flashing new rom
hi
You may also when in recovery choose "Mounts and Storage" unmount /system and /data then choose format syste and format data then install your new rom..
cheers
Alphacode
Hi
I was on NA6 Kitkat (Rooted with CF auto root), and wanted to install V37 Temasek.
So, i installed latest CWM 6.0.4.6
I flashed V37 + Gapps (with all wipes done) = Bootloop at start
"Kernel is not blablabla enforcing" again & again...
Had to reflash stock NA6 to got a working N9005...
So, impossible to flash non TW roms for the moment ?
If this thread can avoid people to waste time like i did... :good:
luminouche said:
Hi
I was on NA6 Kitkat (Rooted with CF auto root), and wanted to install V37 Temasek.
So, i installed latest CWM 6.0.4.6
I flashed V37 + Gapps (with all wipes done) = Bootloop at start
"Kernel is not blablabla enforcing" again & again...
Had to reflash stock NA6 to got a working N9005...
So, impossible to flash non TW roms for the moment ?
If this thread can avoid people to waste time like i did... :good:
Click to expand...
Click to collapse
Hey i having a similar problem but is a but different i can boot in to CWM and install roms like Sweet ROm TW based but when i boot to android
it just goes to the normal stock firmware
But when i flash any AOSP based roms i just get stuck in bootloops like you do
Once on kit kat official you cannot flash cm 4.4.2 until bootloader fix press thanks if this helps
Sent from my SM-N9005 using XDA Premium HD app
Galaxy note 3 sm n900 vn rom installation
I currently have a galaxy note 3 sm n900 and am trying to install vn rom and it is stuck at 0% is there anything i can do. (been at 0% for a whole day):crying:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles
Greetings, i am new here and i am posting this just in case someone gets problem like this and doesn't know how to fix.
If you accidentally tried to install ROM for ZTE Blade III with older Clockwork mod recovery version (i.e. tried to install KitKat 4.4 CM 11 with 6.0.2.7 instead with 6.0.4.9)
Just find older CM version in this case CM 10.1 and install it, it should get you JB 4.1.2 version working and then you can install newer CW version or install back stock ROM.
Hope this helps someone.
Cheers.