Database Users

[Q] Confused with different Bobcat Roms?

Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question

Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.

Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.

Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well

Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed

Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles

GT-I9515 Kernel question

Hello i need some input and help
I bought a new galaxy s4 value edition gt-i9515
So cusom recovery root and roms work
Recovery and rom only without touch and radio
Used cwn and rom from 9505.
So i think its a kernel issue...
As the device came with kitkat and i,m migrated from mtk platform where its possible to create twrp touch with stock kernel my question is there anything similar cause cwn from 9505 works not well (after restore i had to full wipe cause everthing fc, s)
Also i know that i have to repack a kk kernel for every rom version slimkat cwm stock...
Or has this changed?
So my thoughts i take the stock kk kernel and repack it to work with slimkat and my touch problems have gone.
Please correct me if I'm wrong.
I have both kernel but no pc and don't know how to repack.
So is her someone who can help me out
The better solution would be to add support for i9515 to some custom kernel but quick and dirty repack would do.
Thanks alot
phil2sat

i9515 - best ROM?

Hello,
so at this moment i got stock 5.0.1 rooted but i get crashes sometimes [cuz of towelroot i think] so i want to get something more stable.
Question is : can i install ROM's for i9505 ?
I got one requirement - Viper4Android must work
I found this ROM's interresing will they work on my phone? :
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-super-wizcyan-29-nov-15-t3259562
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-crdroid-t3017844
http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-resurrection-lollipop-v5-5-5-t3195202

I think you need a special kernel for the I9505 roms to work on the I9515.
You can find more info here.
I would be careful.

You could also flash back to stock, flash TWRP, and install supersu from TWRP.

N9005 bootloop problem!

Hi friends, I need help! I don't know why my N9005 is having bootloop (Samsung galaxy note 3 screen) with every kernel except darkloard kernel!! I can't boot any CM13 roms or idlekernel or any other kernel doesn't work for me! I am trying also to install twrp 3.0.x recovery but it won't boot also (only 2.x.x works).. I flashed Stock firmwares many times.. I used cf-autoroot i did everything but the problem persists!! help plzzz I don't know where the problem is!

Waelby said:
Hi friends, I need help! I don't know why my N9005 is having bootloop (Samsung galaxy note 3 screen) with every kernel except darkloard kernel!! I can't boot any CM13 roms or idlekernel or any other kernel doesn't work for me! I am trying also to install twrp 3.0.x recovery but it won't boot also (only 2.x.x works).. I flashed Stock firmwares many times.. I used cf-autoroot i did everything but the problem persists!! help plzzz I don't know where the problem is!
Click to expand...
Click to collapse
Try an older TWRP its common knowledge that 3 has problems .

I am using twrp 2.8.7 and it's working but as I said no kernel is working except darklord kernel!!

Soory OP is confusing .
Possible its the wrong kernels you are flashing ??. I have flashed 2 kernels this week no problem .

JJEgan said:
Soory OP is confusing .
Possible its the wrong kernels you are flashing ??. I have flashed 2 kernels this week no problem .
Click to expand...
Click to collapse
yes me too I am confused! i coudn't understand what's the matter!!! and why no kernel works (idlekernel, temask, cm13 roms, leankernel, civz kernel... nothing works!!)

There is rummors about secret silent update from google against custom kernels...
Sent from my Limited Edition Note 3 LTE using Super Tapatalk

help

i am using samsung galaxy j5 2015 v6.0.1 stock.... i have rooted my phone and have twrp3.0.2 recovery.... i tried to flash custom rom which was ressurection remix 5.8.2 with gapps 7.1 .... when i rebooted my device ... it showed samsung galaxy j5 logo..... above that was kernal is not seandroid enforcing set recovery to kernel..... and then there was a orage horizontal line on my logo and my screen slowly turned green.. ihave tried different roms posted on xda but same result... please help me out
thanks

It is because you flashed ROM that is ONLY for lollipop 5.1.1.
And you have 6.0.1, that is why those orange lines are appearing.
Now you have to flash stock firmware, and next time you want to flash custom ROM read carefully.

Ragazzza said:
It is because you flashed ROM that is ONLY for lollipop 5.1.1.
And you have 6.0.1, that is why those orange lines are appearing.
Now you have to flash stock firmware, and next time you want to flash custom ROM read carefully.
Click to expand...
Click to collapse
ty soo much fr such quick reply ...really impressed with xda forums and tips... i will try to degrade my android system and then flash these roms