Related
Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks
Try downloading a stock firmware that has 3 files and tick repartition. Then flash jpy.
Sent from my GT-I9000 using XDA App
Go all the way back to JM8 to be safe. Maybe re-partition too, 512 PIT should be the right one to use but double check what samfirmware.com says.
Then flash whatever ROM you want.
Maddmatt said:
Go all the way back to JM8 to be safe. Maybe re-partition too, 512 PIT should be the right one to use but double check what samfirmware.com says.
Then flash whatever ROM you want.
Click to expand...
Click to collapse
And don't forget to switch your left and right speaker while holding right ear with left hand...
Download jpjpa from http://www.emoiz.com/download-stock-firmwares-for-samsung-galaxy-s-i9000
install it with 512 pit file then flash xxjpy without ticking repartetion option
xxjpy is just a update for working firmware
Stock JPU should work fine as well..
I had put on the ICS 4.0.3 from the google code project.
It worked fine, but I wanted to go back to my fully functional phone. I earlier had darky's 10.2.2 EE.
For going back to Darky's, I downloaded the latest pakcage 10.4.2 and went into CWM. It failed to update. then I tried wiping the cache etc, then also it failed to flash the package.
Then I tried using CWM's restore and wanted to go back to image prior to darky 10.2.2.. that also failed.
now when I rebooted system, hoping to do a factory reset, the phone is not booting up.
I tried connecting odin in download mode, that odin cant see the phone, even though the download mode is visible on the phone.
need help, seriously, and urgently...
Looks like you posted to the wrong section...
sraghav said:
I had put on the ICS 4.0.3 from the google code project.
It worked fine, but I wanted to go back to my fully functional phone. I earlier had darky's 10.2.2 EE.
For going back to Darky's, I downloaded the latest pakcage 10.4.2 and went into CWM. It failed to update. then I tried wiping the cache etc, then also it failed to flash the package.
Then I tried using CWM's restore and wanted to go back to image prior to darky 10.2.2.. that also failed.
now when I rebooted system, hoping to do a factory reset, the phone is not booting up.
I tried connecting odin in download mode, that odin cant see the phone, even though the download mode is visible on the phone.
need help, seriously, and urgently...
Click to expand...
Click to collapse
If you have download mode you will be fine, its only a soft brick.
If its not recognizing your phone in download mode it means drivers are not installed properly, download kies from Samsung it will install correct drivers.
Try again full stock gb rom with Odin and reparation selected.
Also post in help next time.
Sent from my GT-I9000 using xda premium
sraghav said:
I had put on the ICS 4.0.3 from the google code project.
It worked fine, but I wanted to go back to my fully functional phone. I earlier had darky's 10.2.2 EE.
For going back to Darky's, I downloaded the latest pakcage 10.4.2 and went into CWM. It failed to update. then I tried wiping the cache etc, then also it failed to flash the package.
Then I tried using CWM's restore and wanted to go back to image prior to darky 10.2.2.. that also failed.
now when I rebooted system, hoping to do a factory reset, the phone is not booting up.
I tried connecting odin in download mode, that odin cant see the phone, even though the download mode is visible on the phone.
need help, seriously, and urgently...
Click to expand...
Click to collapse
First of all, I think that you wrote in the wrong forum, should be in General section.
That said... if you can enter download mode, then your phone is NOT bricked.
Just install (or reinstall) Samsung USB drivers for your PC, and Odin will connect again.
Edit: I tought I was the first to reply but it seems others were quicker in that
sraghav said:
I had put on the ICS 4.0.3 from the google code project.
It worked fine, but I wanted to go back to my fully functional phone. I earlier had darky's 10.2.2 EE.
For going back to Darky's, I downloaded the latest pakcage 10.4.2 and went into CWM. It failed to update. then I tried wiping the cache etc, then also it failed to flash the package.
Then I tried using CWM's restore and wanted to go back to image prior to darky 10.2.2.. that also failed.
now when I rebooted system, hoping to do a factory reset, the phone is not booting up.
I tried connecting odin in download mode, that odin cant see the phone, even though the download mode is visible on the phone.
need help, seriously, and urgently...
Click to expand...
Click to collapse
st4rk said:
If you have download mode you will be fine, its only a soft brick.
If its not recognizing your phone in download mode it means drivers are not installed properly, download kies from Samsung it will install correct drivers.
Try again full stock gb rom with Odin and reparation selected.
Also post in help next time.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
jonsat said:
First of all, I think that you wrote in the wrong forum, should be in General section.
That said... if you can enter download mode, then your phone is NOT bricked.
Just install (or reinstall) Samsung USB drivers for your PC, and Odin will connect again.
Edit: I tought I was the first to reply but it seems others were quicker in that
Click to expand...
Click to collapse
these people are right i had the same prob all i did was re install kies drivers and flashed darky 10.2 re odin edition
sraghav said:
I had put on the ICS 4.0.3 from the google code project.
It worked fine, but I wanted to go back to my fully functional phone. I earlier had darky's 10.2.2 EE.
For going back to Darky's, I downloaded the latest pakcage 10.4.2 and went into CWM. It failed to update. then I tried wiping the cache etc, then also it failed to flash the package.
Then I tried using CWM's restore and wanted to go back to image prior to darky 10.2.2.. that also failed.
now when I rebooted system, hoping to do a factory reset, the phone is not booting up.
I tried connecting odin in download mode, that odin cant see the phone, even though the download mode is visible on the phone.
need help, seriously, and urgently...
Click to expand...
Click to collapse
Same happened fto me with odin, all I did was use another computer and there you have it
Are you people serious?
Sent from my GT-I9000 using xda premium
dark_knight35 said:
Looks like you posted to the wrong section...
Click to expand...
Click to collapse
siky_dude said:
Are you people serious?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Yes, I'm serious .
dark_knight35 said:
Yes, I'm serious .
Click to expand...
Click to collapse
I'm not :screwy::what::sly:
Sent from my GT-I9000 using xda premium
How do you say your rom is called...?
Enviado desde mi GT-I9000 usando Tapatalk
Apologies for the wrong forum, I guess I was too panicky...
Now I found a solution, use odin with a different computer (which had the drivers etc set up), then get this rom
http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
flash it using the instructions given, and wow, the phone is back to life.
After that, I I upgraded to Darky's 10.4.2 and it looks good so far..
Thanks for the help, tips, ideas and the patience for my mis-placed msg in this forum.
what would I do without open source community ?
love you guys
sraghav said:
Apologies for the wrong forum, I guess I was too panicky...
Now I found a solution, use odin with a different computer (which had the drivers etc set up), then get this rom
http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
flash it using the instructions given, and wow, the phone is back to life.
After that, I I upgraded to Darky's 10.4.2 and it looks good so far..
Thanks for the help, tips, ideas and the patience for my mis-placed msg in this forum.
what would I do without open source community ?
love you guys
Click to expand...
Click to collapse
For the future... You can`t flash stock roms over CM7/9 or any aosp port via CWM you need to flash a stock base rom first
you need to install a corruspending Karnel via ODIN in ur phone , if u need details u can search in the forum or just PM me
siky_dude said:
Are you people serious?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Reported as junk. Because people are serious and you are not more clever than anyone here.
This document from my ROM project.
You need to start from "How to install JVU stock Firmware" part and stop at installing GamerzRom step.
Please report this thread for moving it right place. Be careful mate. You can't switch from Cyanogenmod and ICS to Samsung based roms from CWM. You need to flash original rom with repartition again.
If your PC doesn't see the device, try Ubuntu live cd or Virtualbox. You can flash your phone with heimdall on Ubuntu. If you need help about this just PM me. Take care mate.
burakgon said:
Reported as junk. Because people are serious and you are not more clever than anyone here.
This document from my ROM project.
You need to start from "How to install JVU stock Firmware" part and stop at installing GamerzRom step.
Please report this thread for moving it right place. Be careful mate. You can't switch from Cyanogenmod and ICS to Samsung based roms from CWM. You need to flash original rom with repartition again.
If your PC doesn't see the device, try Ubuntu live cd or Virtualbox. You can flash your phone with heimdall on Ubuntu. If you need help about this just PM me. Take care mate.
Click to expand...
Click to collapse
Hmmm, go troll someone else, gaming engine boy .
Sent from my GT-I9000 using xda premium
siky_dude said:
Hmmm, go troll someone else, gaming engine boy .
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Hahahahahah!!! Again !!!
sraghav said:
I had put on the ICS 4.0.3 from the google code project.
It worked fine, but I wanted to go back to my fully functional phone. I earlier had darky's 10.2.2 EE.
For going back to Darky's, I downloaded the latest pakcage 10.4.2 and went into CWM. It failed to update. then I tried wiping the cache etc, then also it failed to flash the package.
Then I tried using CWM's restore and wanted to go back to image prior to darky 10.2.2.. that also failed.
now when I rebooted system, hoping to do a factory reset, the phone is not booting up.
I tried connecting odin in download mode, that odin cant see the phone, even though the download mode is visible on the phone.
need help, seriously, and urgently...
Click to expand...
Click to collapse
Just to make you know. You shouldnt flash any stock based from over cm/ics rom, because it runs on totally different partitioning and file systems.....flashing this will most likely cause soft brick....next tikme use Odin if coming from cm/ics roms to stock ones
Sent from my GT-I9000 using XDA
I need the PIT file for GT-N8010 16GB model.
Thank you.
Sent from my GT-N8010 using Tapatalk HD
Nobody
Sent from my GT-N8010 using Tapatalk HD
CuBz90 said:
Nobody
Sent from my GT-N8010 using Tapatalk HD
Click to expand...
Click to collapse
Unselect repartition and try again without .pit
legion1911 said:
Unselect repartition and try again without .pit
Click to expand...
Click to collapse
Tried that with no luck.
Sent from my GT-N8010 using Tapatalk HD
Use the odin version and odin manual you find here:
http://forum.xda-developers.com/showthread.php?t=2104988
I'll take a look. Thanks
I've noticed that from recovery, when I choose to reboot into Bootloader, I get the fuzzy screen continuously.
What is rebooting to the bootloader supposed to look like?
CuBz90 said:
I've noticed that from recovery, when I choose to reboot into Bootloader, I get the fuzzy screen continuously.
What is rebooting to the bootloader supposed to look like?
Click to expand...
Click to collapse
The original recovery has no "reboot into bootloader" option.
Dude... use a stock samsung rom, use the odin I give on that page and use odin as written in the manual you find there.
legion1911 said:
The original recovery has no "reboot into bootloader" option.
Dude... use a stock samsung rom, use the odin I give on that page and use odin as written in the manual you find there.
Click to expand...
Click to collapse
Ok, i'll give that a try now. I didn't know it had to be a certain version of Odin.
Thanks
Still no luck.
Looks like it's stuck like that.
Thanks for your help anyway.
I've also noticed that after flashing stock firmware via Odin, the phone stays stuck on the bootloader, unless I do a factory reset in recovery.
EDIT: I've also just noticed that according to the link below, I am flashing the wrong firmware, but I downloaded the UK stock N8010 firmware from Sammobile. Strange.
http://forum.xda-developers.com/showthread.php?t=2016792
Still no luck. I guess I'll have o cope with it for now. I'll eventually send it to get fixed.
Sent from my GT-N8010 using Tapatalk HD
Pit file makers wanted!!!
CuBz90 said:
Still no luck. I guess I'll have o cope with it for now. I'll eventually send it to get fixed.
Sent from my GT-N8010 using Tapatalk HD
Click to expand...
Click to collapse
What did you do?
CuBz90 said:
I need the PIT file for GT-N8010 16GB model.
Thank you.
Sent from my GT-N8010 using Tapatalk HD
Click to expand...
Click to collapse
You can look here http://forum.xda-developers.com/showthread.php?t=2268735
You can use my batch file N8000_SaveMyPitfile.zip or N8020_SaveMyPitfile and send me or post the pit file result for control.
As you can see the batch make only a copy of a little portion memory of N8010
So i can verify it (if it is completed for ex.) post it as regular n8010 pit file and post new batch for save my pit file of N8010 16GB!
If you still need the pitfile, I've ordered a red note 10.1 wifi only 16gb. (which is the n8010, I think)
It will arrive this Friday or Saturday; if I'm at home to open the door, that is.
So it might be Monday or later (I'll try to keep you posted)
I'll install a custom recovery and get root anyway. (Is there TWRP for it?)
Sent from my SHV-E160L using XDA Premium HD app
awesomefireduck said:
If you still need the pitfile, I've ordered a red note 10.1 wifi only 16gb. (which is the n8010, I think)
It will arrive this Friday or Saturday; if I'm at home to open the door, that is.
So it might be Monday or later (I'll try to keep you posted)
I'll install a custom recovery and get root anyway. (Is there TWRP for it?)
Sent from my SHV-E160L using XDA Premium HD app
Click to expand...
Click to collapse
If so you would be my hero. :good:
Somehow I have broken my GT-N8010 a few days ago and I've been trying to find a pit file since that day, so I would need this pit file too, please.
Regarding your question about TWRP: http://forum.xda-developers.com/showthread.php?t=2133920
What version of Odin have you tried?
Actually, you do not need a pit.
Please boot into recovery (Vol-Up + Power + Home) and tell me what your CSC is.
tweetatoo said:
What version of Odin have you tried?
Actually, you do not need a pit.
Please boot into recovery (Vol-Up + Power + Home) and tell me what your CSC is.
Click to expand...
Click to collapse
I'm currently at work, but will have a look when I'm at home.
But as far as I found out, an update via PDA File from Samsung (Stock FW) didn't change anything.
Also all tips on other threads:
- Wipe data /Cache, Dalvic Cache, System and so on changed nothing.
It freezes at the Boot Image "Samsung Galaxy Note 10.1"
Best Regards
tweetatoo said:
What version of Odin have you tried?
Actually, you do not need a pit.
Please boot into recovery (Vol-Up + Power + Home) and tell me what your CSC is.
Click to expand...
Click to collapse
actual CSC is : Any
Odin version i used was: V1.85
I also tried with odin version V3.07 but no success
here it is
GenMcMayr said:
If so you would be my hero. :good:
Somehow I have broken my GT-N8010 a few days ago and I've been trying to find a pit file since that day, so I would need this pit file too, please.
Regarding your question about TWRP: http://forum.xda-developers.com/showthread.php?t=2133920
Click to expand...
Click to collapse
This should be it...
Hi,
Ive got at present "S5363XXLK1_S5363O2ULK1_S5363XXLK1_HOME.tar.md5". Flashed to my gt-s5363 phone. At present its unrooted. I was only able to use "cwm blah_blah" before when I had the 2.3.5 official firmware. I think there is issues with o2 galaxy y. After getting my phone back to official upgrade 2.3.6 what can I flash without risking bricking it again? possibly odin 4.42 Ive just seen a video where someone as flashed a one file flashing. Is it ok or is there any more proven roms for my phone. At first it wouldnt root with the normal "update.zip" I had to use "Universal_GB_ROOT_v9.zip". I was able to back up and restore, but after trying the "[email protected]@xda.zip" it bricked it. Any advice please.
tg
Same here. My phone got bricked again =.= Maybe I missed a step. Just download a stock firmware.
Start off with Samsung Kies and restore the phone with it.
Sent from my GT-S5360 using xda app-developers app
kies not working on s5363
Kies is proving a no-goer, what I did, was to update kies ,this put new drivers on pc, I then exited kies and ran odin 3.07 and downloaded a rom from tzar site. I ran a one file zip with "home" at the end. This unbricked my phone and installed offiicial 2.3.6 firmware. Then when I tried to connect kies with my phone it said "cannot retrieve information" ,,but Im not going to mess with kies if its being tempermental. I can still copy from phone with windows explorer.
JasoX said:
Start off with Samsung Kies and restore the phone with it.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok so I have a mje stock note 3 that is stuck in a loop. I tried kies to stock odin w firmware and pit and still nothing. The phone boot sometimes but shoes only the top bar with the drop down menu and a blank home screen, shortly after it displays an error about something unable to work and reboots again and the loop begins until it deckdes to half ass boot again.
Has anyone encountered such a problem? It happened after I noticed misbehaving of some stock apps that kept crashing and I resorted to stock restore the phone with kies.
Thanks for any and all help.
The knox hasnt been tripped and its sjpposed to be intirely stock.
Sent from my GT-N5110 using Tapatalk
Have you ever rooted or installed a custom recovery?
jub2k3 said:
Ok so I have a mje stock note 3 that is stuck in a loop. I tried kies to stock odin w firmware and pit and still nothing. The phone boot sometimes but shoes only the top bar with the drop down menu and a blank home screen, shortly after it displays an error about something unable to work and reboots again and the loop begins until it deckdes to half ass boot again.
Has anyone encountered such a problem? It happened after I noticed misbehaving of some stock apps that kept crashing and I resorted to stock restore the phone with kies.
Thanks for any and all help.
The knox hasnt been tripped and its sjpposed to be intirely stock.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
so u have tried to download your MJE firmware from samfirmware and flash via ODIN I believe.
Have you tried to go into stock recovery after finish flash from ODIN and to wipe data/factory reset & wipe cache partition ?
I have no idea about verizon N900, but I guess it should be the same. You may not follow my suggestion if you are unsure about this, as I have no idea about this device. Just give an option of suggestion you may try, because on N9005, this wipe / reset sometimes is quite useful to solve bootloop on stock firmware.
Nope stock recovery no root.
Sent from my GT-N5110 using Tapatalk
I have not tried samfirmwares as they take too long to download, but I will take your advice and post results.
Sent from my GT-N5110 using Tapatalk
jub2k3 said:
Have not tried samfirmwares as they take too long. But I will try sammobile and the wipe and post results.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
okie.
I just tried your advice Sonic. I flashed N900VVRUBMJE_N900VVZWMJE_N900VVRUBMJE_HOME.tar.md5 from samfirmwares and I used odin 3.09 and still no success.
It now doesn't lag at the verizon logo its a little smoother but it still stays there and then it reboots and the loop continues.
Any other suggestions guys?
Is it safe to repartition with the pit file being flashed as well or will the phone be worse off afterwards?
jub2k3 said:
I just tried your advice Sonic. I flashed N900VVRUBMJE_N900VVZWMJE_N900VVRUBMJE_HOME.tar.md5 from samfirmwares and I used odin 3.09 and still no success.
It now doesn't lag at the verizon logo its a little smoother but it still stays there and then it reboots and the loop continues.
Any other suggestions guys?
Is it safe to repartition with the pit file being flashed as well or will the phone be worse off afterwards?
Click to expand...
Click to collapse
Did u do factory reset / full wipe?
If u have the correct pit for ur model nd firmware, shld be fine.
Sent from N7105, DN3 with AGNi kernel.
I did a full wipe/ clear cache and then full firmware flash from sammobile then one with pit but still no success.
What did work was using a uart box and the phone in DM to reset the efs and then rewrite the fullflash from sammobile. Now the phone works perfect just has an invalid imei 00/0 but it still works. I am going to extract a QCN from another 900V and edit it with my phone's info tomorrow and write it to see if that fixes the no IMEI and No serial number issue. I will post results afterwards.
Thank you guys for the input.
OK solved with a donor QCN now all is good on this note.
Thanks to all for the assistance.