I am new in this type of phone and I bricked it.
how I flash a rom with out HSPL and the phone dont do nothing only one thing
when I connect to the computer it reconize it like Qualcomm CDMA Technologies MSM
but now I dont know what to do to fix it. I think the phone is not damage because the pc
reconize it.
1. No LED light showing it's charging.
2. Won't power on at all.
3. Hard re-set doesn't work.
4. Can't get into bootloader.
I've had 5, and bricked two... Only hope is to just snatch the battery out for a few hours, and try again. Have a flash ready on A SD encase it ever starts unexpectedly.
Very similar to my story with a Happy ending here:http://forum.xda-developers.com/showthread.php?t=866852
you can contact the member of this group with the screen name of "trashcan"... he has the capability to jtag (revive) the unit.
Related
I attemted to flash my Kjam to WM6 & it went dead. It wont start at all. Kjam Service centre says there is a problem in the mother board and it needs to be replaced for $ 300+........now if flash fails...the ROM must have gone corrupt , what has it to do with the motherboard ?
can anyone throw light on whats the real thing ?
Deven.
take out the battery for hours then re-install it. try to boot in bootloader mode first(3 colors). If it work, it's the time to re-flash the right rom now!
When you start the device up what happens?
Same Problem accured for me!!!!!!!
I installeda new rom and my device didn't power on after that.
What should i do now?
afghahi said:
I installeda new rom and my device didn't power on after that.
What should i do now?
Click to expand...
Click to collapse
Nobody here is providing any details so everything is going to be just a guess. If either of these phones were a G4 and you flashed a rom that tried to update the IPL/SPL then its very likely you have bricked your device. But again, with no information about what rom you were trying to flash, what your IPL/SPL were beforehand, or details about what it means that it won't turn on, everything is just a guess...
Bricked Kjam
its comletely dead.....i had disconnected the battery for a couple of days then connected it but it wont start....i checked the battery using multimeter it is fully charged....neither does it power ON when connected to mains...It doesnt get detected when connected to the USB port..thats obvious since it is not powering up...so cant flash it again.. now m in a fix as to whether to spend another fortune after this sweetheart or keep it in a showcase ....
Deven
( a bricked KJam )
If nothing lights up that looks pretty terminal. :-(
Maybe you could buy a broken Wizard with a working motherboard? Alternatively maybe sell off your mostly working Wizard on this forum to raise money to buy a new device?
Sorry if you can't get it going. :-(
All started with trying to upgrade(rewrite) the GSM part because the Hermes had problems with phone part - when trying to call - the phone stop responding, bus the pda part sill worked.
So - I tried and tried and tried again, reading many threads about HARD SPL,Flashing radio, etc. Nothing worked..
In the end "i managed" to kill GSM - phone had "No Gsm" on boot-up.
From there i tried to downgrade SPL to 1.04 so that i try to "raw" rewrite the GSM part.
But something went terribly wrong, and while downgrading SPL, the phone suddently shutdown and never opened again.
Now i have the folowing situation: NO BOOTLOADER, no usb conectivity, nothing
This means that i cannot connect via USB whatever i try.
Is there any hope for me? or is it TOTALLY BRICKED?
Any help is apreciated!! I can even dismantle the mobile if there is any way to flash it via some kind of jtag connection...anything ...
The folks at www.imei-check.com can do the JTAG flashing. Just email them. It would be costly for you to do it yourself...
Are you saying that the phone won't turn on at all or that it does but you can't get a bootloader screen?
Have you tried taking the battery out for a while? Have you tried flashing an OEM rom and radio compatible with your device off an SD card?
All of this info is in the wiki, as are OEM roms you can flash.
Let us know how you get on.
Good luck.
WB
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
@wacky.banana: The phone is totaly dead: no bootloader, doesn't boot at all, doesn't seem to have any USB conectivity at all. Flashing from micro sd doesn't work : probably because the bootloader isn't working.
@drummer10630: i'll check with imei-chek about jtag flashing, especially the price and shiping costs.thanks
@markafreeman: I tried, but when i put the battery in, the red light goes off, not to amber . no soft or hard reset helps. not even leaving the battery out for 2 weeks - i had tried that too . thanks anyway.
Anything else I can try? - phone totaly dead, no bootloder, no usb conectivity - cannot use mtty, cannot flash from microsd
I had to get a replacement device at that point when it happened to me.
Maybe someone else know a way to get it working.
Good luck.
get onto orange
tell them you dropped the phone
and it crashed and wouldnt turn on
so you managed to hard reset it
and it crashed an ****ed up
they'll replace it
well they will send it to HTC
who just replace the handset rather than repair it
Hi dancameo2k , maybe you will not remember but plz:
I ve bought recenty an spv m3100, im effortless trying to flash the rom to an wm6 version.
Like you ive started with the hardsppl flash thing to prevent bricking it and prior to sd flashing... and im not sure if its workin...
plz can you explain in detail how did you bricked it??? thx!!!!
the rom you used to flash was an american version or european one???
i was running the button program and it stopped at 98% and the bar turned red. i did the recovery process and got the colored screen. after that i couldnt active sync phone with computer, i turned the phone off and now cant get it to turn back on. i am f$#%ed arent i
any help would be wonderful.
thanks
Which is your device,G3 or G4 ? well,if its a G3,then try to get into bootloaders (multicolor screen),if it gets there,try to flash Button's Rom again,but if its a G4,then I'm afraid it might be 'Bricked',still try to get into bootloaders,if it gets there,then its safe.
Cheers!
Don't worry i bricked my G4 like 3 or 4 times already but managed to revive it lol
If yours is a G4,
-enter bootloader ( i think camera+soft reset button) -- if you can't get into bootloader, maybe it's time to pay a visit to service center
-flash using wizard love ROM, just use the RUU included in the rar file, if you're not italian, just "Avanti" means something like next (http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar)
-After installation is finished and your device is alive again, install EnableRapi.cab and Cert_SPCS.cab
-SOFT RESET
-Let it reboot until you get into the today screen (ignore the ugly splash, that's the price you have to pay to get your device alive.. )
-Re-flash WM6 using Shelltool, read the shelltool documentation and make sure you don't miss anything.
I read there are easier method like soft and hard SPL, but never try. The above is what I always do when I brick my wizard.
its a g3
but the thing is everytime i try to turn it on, nothing happens. The first time, after it stopped at 98% i turned it off and got the bootloaders screen, but active sync didnt work, then i turned it off again and it never came back on. the next day when i got home, try to turn on and nothing. Also when trying to charge phone, no orange light shows up. anything you can think of will be awesome
thanks
chris
dead battery perhaps? try borrowing one of your friend's charged battery.
I bricked my wizard several times but never got to that "really dead" point.
The only thing I can think of is just, IF you managed to get that bootscreen again, and can have your wizard alive long enough to flash, don't turn it off again, but try re-flashing using RUU (they worked on bootscreen even though active sync is not connected). I also don't have experience reviving G3s, maybe another member with G3 can help?
My name is carlos and im new in the forum.
This is my problem. I have an HTC Imagio. I tryied to update it but i fail because my phone wont turn on again. I dont know what can i do because I new in the htc world and I dont know how can I start.
Please heeeeeeelpppppp meeeeeeeeeeeeeeee
when yoy say "fail" what exactly happen....???
The phone wont turn on again T_T
You're not giving a very good explanation, did you attempt boot loader mode? anything else? at the present moment, you're just taking up thread space..
The boot loader mode is the hard reset??? or what is it?? The phone doenst enter on the hard reset (color screen with 3 options)
Moved as this is not ROM Development
Sorry about that, anyone know how i can fix it????
Hi i have a imagio dead. No bootloader load (someone wrote a blackstone hspl) and broke it .. the only thing when i connect on usb it is found as a qualcomm msm smthing. no drivers for this.. looked all over, xda, google. i found some jtag methods... I wrote a Intelpxa for a rw6815 with jmmflaser... but befor trying a jtag method, and/or try to sell it for components, i want to give it another try. Does enyone know how at least connect to mtty(to write wia usb the bl), or write a bl (any) wia usb?
Imagio Bricked
No USB way...
Unbrick a phone just can be made with JTAG tools... See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list
Hello everyone ... this is my first post on the forum I'm a reprimand in my assistance, a residue in Brazil and a customer trou Imagio HTC unlock the verizon and I just noticed that no longer seems to me he is the one CDMA XV6975 which blotted out and not turned over, but do not have IMEI MEID DEC and HEX as well ... riff bought a box to try and repair it could make you turn it on, no longer leaves the HTC logo and is vibrating, already tried the hard reset recovery mode and nothing continues to vibrate, not boot tried one more rom's not leave 0%. Can anyone help me with this device, because the customer does not come out of my foot.
Thanks to all.
Htc imagio bricked
hello guys, i really need help from u. i bricked my imagio this evening and right now it wont turn on so i don't know if u guys can hlp me with any software to recover it.
I will be very happy to c my imagio is breathing.
thanks for your help may God bless you all.
please i need help,here is the historique of my htc
i already tryed to read code using lmxkey,after connect to soft phone dead and cant power on
now even with volume up and power on phone cant give any signal no boot mode
thx
hello every body me still waiting for any solution where is expert
Did you do anything to your device before this behaviour,
With the information that you have provided, I can assume that you have a battery problem since your phone doesn´t boot up or gets into bootloader.
Otherwise, if you have flashed incorrectly (eg. flashing a rom from other phone to your device by mistake) or messed with the phone...that´s definitely symptoms of a bricked phone.