Database Users

Dust under the screen

So I have noticed a fairly large grouping of dust has collected under my screen on the top left corner. Just wondering if anyone else has run into this and how did you get it taken care of?
Sent from my PC36100 using XDA App

ajk511 said:
So I have noticed a fairly large grouping of dust has collected under my screen on the top left corner. Just wondering if anyone else has run into this and how did you get it taken care of?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Happens to a lot of people including myself. I just deal with it since I can only see it during the day in the sun. You can take it to the spring store and they might fix it for you.

jxr94 said:
Happens to a lot of people including myself. I just deal with it since I can only see it during the day in the sun. You can take it to the spring store and they might fix it for you.
Click to expand...
Click to collapse
...or so you think:
http://forum.xda-developers.com/showthread.php?t=948417

I have recently noticed the same thing in the same upper left corner. I switched from my oversized battery and cover back to the original battery and cover to see if that helps prevent it from getting worse.

brandenk said:
I have recently noticed the same thing in the same upper left corner. I switched from my oversized battery and cover back to the original battery and cover to see if that helps prevent it from getting worse.
Click to expand...
Click to collapse
I've been using a different back as well, for the powermat charger. I wonder if that is what caused it. Well, off to the sprint store I guess. We'll see what they say.
Sent from my PC36100 using XDA App

I have the same problem in the upper-left hand corner. I didn't have an extended battery until today. Completely stock, even got the dust while I had my screen protector on. I do notice that my phone has what I think is called "screen separation". Sometimes when I press down on the screen, it feels strange like it is separated. Hasn't affected the operation of the phone, but it's not too big of a deal for me to take back to Sprint yet. I only notice the dust when the screen is completely black and in direct light, too.
ajk511 said:
I've been using a different back as well, for the powermat charger. I wonder if that is what caused it. Well, off to the sprint store I guess. We'll see what they say.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse

I actually noticed the dust under my screen about two weeks ago and have not made it to the sprint store yet. Should I even bother going there or are they not going to do anything for me? I have the Total Equipment Protection as well.

I've noticed dust under my screen as well. What sucks is the dust is right on top of the front facing camera ....maybe this weekend I will take it to the sprint store and see what they say.

Yeah I have it too, also have a blown speaker for the 2nd time -______-. I took it in to get fixed and they gave me a new screen (awesome) but forgot to put a earpiece back in. Looks like im just ignoring the 2nd time i got dust under the screen and gonna fix the rear speaker myself, or try to at least.

If they have any displays in stock, they'll replace it on the spot. Just make sure you tell them you want a brand new component. The store I took it too put a display that was all scratched up and nicked on the edges on my phone as if I wouldn't mind. How insulting!

Defective screen - is this terminal?

Hi everyone,
My phone survived falling off the roof of my car and being run over by another car - the leather slip case kept it intact. Initially I thought I'd got away with it, but its picked up a screen defect which has got progressively worse. Essentially the colours go screwy - a green tint with blue bands which move across the screen. Its definitely a loose wire as I've been able to "fix" the fault by tapping the back of the phone.
Until tonight, where its not going back to normal no matter where I tap or how hard. I'm not afraid of disassembly if its fixable - found a video online where they pull it literally to bits. But if I go buy the torx driver is the ribbon cable into the screen reasonably easy to get to? Anyone done it?
Still got 4 months left on my contract, so will be a little sad if I have to resurrect my Hermes.....

The blue thing usually happens with my phone. Got my screen replaced like a week ago and the problem persists. What I do is 'flex' the screen in the top left and bottom right and that usually works. Try like bending the screen (sort of) and it will probably work.

Skellyyy said:
The blue thing usually happens with my phone. Got my screen replaced like a week ago and the problem persists. What I do is 'flex' the screen in the top left and bottom right and that usually works. Try like bending the screen (sort of) and it will probably work.
Click to expand...
Click to collapse
Success!!!!! Sir, you are a genius, thankyou!

auximinies said:
Success!!!!! Sir, you are a genius, thankyou!
Click to expand...
Click to collapse
No problem, any day. Don't even ask how I figured out that that's the way it can be fixed haha.
Sent from my HTC HD2 using XDA App

My god how did your phone survive that
Sent from my HTC HD2 using XDA App

FingerPrint/Power button

My fingerprint/power button is slightly slanted. I was wondering if this is just me or not. The button is lifted slightly from one end.

i.mac said:
My fingerprint/power button is slightly slanted. I was wondering if this is just me or not. The button is lifted slightly from one end.
Click to expand...
Click to collapse
There's a data ribbon on one side that holds it crooked like that. this has already been brought up and pretty much all of them are like that (as far as I know) so I wouldn't be concerned about it.

live4nyy said:
There's a data ribbon on one side that holds it crooked like that. this has already been brought up and pretty much all of them are like that (as far as I know) so I wouldn't be concerned about it.
Click to expand...
Click to collapse
You've been a real relief today. Thank you.

This is the first thing I noticed after taking it out of the box. Couldn't believe they wanted it to be like this.
Sent from my MB860 using XDA App

Crooked here as well. The first atrix I had seemed to be straight though. Kind of annoying. Also one side of the screen is slightly lower than the other.

eallan said:
Crooked here as well. The first atrix I had seemed to be straight though. Kind of annoying. Also one side of the screen is slightly lower than the other.
Click to expand...
Click to collapse
Same for me. I had to return my first atrix because of battery issues and it had a straight one but the one I have now is tilted. I don't really stare at it so no big deal to me. At least my battery is performing now.
Sent from my MB860 using XDA App

To add to the build quality issues, I went through 3 units at the store an all had some degree of dust under the screen. I took the one with the least. I took a look at my cousin's unit the other day and it also had a couple of specs under the screen.

BBock9 said:
Same for me. I had to return my first atrix because of battery issues and it had a straight one but the one I have now is tilted. I don't really stare at it so no big deal to me. At least my battery is performing now.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Define performing. Mine is still garbage compared to what it should be. That's the same reason I returned the first one.

http://forum.xda-developers.com/showthread.php?t=989042
Sent from my MB860 using XDA App

okay at least im not the only one. a friend of mine thought it was a protective piece of plastic that needed to be peeled off at first. it looked too thick to be something like that so i tested it first to see if it would read my finger which it did so i left it on..
odd that motorola would place it like that

it is an inset reader attached to the board with a ribbon cable, as part of a button. Some sit slightly different than others, it is common on everything that has this type of multifunction setup.
get your OCD under control

digitalallstar said:
To add to the build quality issues, I went through 3 units at the store an all had some degree of dust under the screen. I took the one with the least. I took a look at my cousin's unit the other day and it also had a couple of specs under the screen.
Click to expand...
Click to collapse
id say its less a build quality issue and more a design issue, since the glass isnt glued to the screen. I have myself seen 3-4 atrix, all except one had either major dust or at least 1-2 specks.
and on top a software bug that scared the hell out of me, seeing dead and stuck pixels only in the CAMCORDER mode.

I should consider myself lucky then, no dust and my fingerprint/power button is straight. However, it is a refurbished phone (perhaps one that was returned by one of you!) so they might have taken a bit more care in reassembly. Who knows... Maybe it is best to buy second hand sometimes, or I'm just plain lucky

brendan_orr said:
I should consider myself lucky then, no dust and my fingerprint/power button is straight. However, it is a refurbished phone (perhaps one that was returned by one of you!) so they might have taken a bit more care in reassembly. Who knows... Maybe it is best to buy second hand sometimes, or I'm just plain lucky
Click to expand...
Click to collapse
I have had four refurb atrixs and each one has had a straight fingerprint scanner. All of them at the stores I have seen are slanted. Seems the refurbs are a little nicer in that aspect
Sent from my MB860 using XDA App

Same here ... a little slanted, but then again I hadn't really spent much time looking at the button before!

i never liked the button!!

[Q] Dead (?) screen strip

all right. I've found various things about this on the web regarding other HTC phones, but I can't seem to find if anyone else has had this problem with their shift... This morning I realized that the "clear" button in the notification dropdown on CM7 wasn't working for me. I wrote it off as a weird bug. But then I tried to play angry birds, and I can't drag them back, they just fall right off the slingshot.
So I zoom in and I can pull the birds back, but when I get to this strip on the screen, they fly off without my picking my finger up.
Besides the clear button, screen presses generally seem to work, atleast when I'm selecting icons in landscape mode from my home screens. But the n1 style live wallpaper will respond to touches in this "strip" of screen by shooting off the lines around it instead of in it. Also, when I tried to drag to a different homescreen and stop in this strip, it will bounce back. same thing with notification bar. If I try to start dragging the screen from this "strip" I get no movement. The weird thing, of course is that this part of the screen isn't completey dead in terms of responding to touches, because it does register on my device that it is being touched, but drags, the notification menu clear button, the live wallpaper, and, of course, angry birds act funky when I use this part of the screen.
I guess I have to go back to sprint. I think I'm just going to flash a stock rom, but not unroot it.
I also don't have time, so I'm kind of just hoping it will go away.
ANYWAYS... anyone else having touchscreen issues with their HTC EVO shift?

PS: I think clocking my kernel at 800 instead of the 1200 I was using might have something to do with this?
Was running at 800 to preserve battery life, but back at 1200 after a nandroid restore and the problem seems fixed.
2 be clear, I had this issue on CM7 and MikFroyo, so I don't think it could be software related. But CPU clocking related.
Yeah, I also doubt that is the case.

My screen had a freek out. With out touching the screen it would open and close apps jump screens and when I touched the screen I would get no response at all. Had to RUU and send it in for a new phone it was in the connection with the screen. So the sooner you ask for a replacement the better.
Sent from my PG06100 using XDA App

did you just call? any tips? I'm wondering if I can handle this over the phone or not. Also - what did you do while you were waiting for the new phone to come in?

turns out it was the friggen screen protector. however, before I realized that I called my local repair shop and they said that they would be able to swap my phone out for a new/refurb one for $35. Too bad it isn't actually an issue, because I've noticed that the phone is a little less responsive to touch even with the screen protector off... it's just that its not clearly an issue at this point.

I actually had a similar issue with a replacement phone where the left side about 1/8" wouldn't respond (couldn't press q button on keyboard at all). After some research I found out about a great lil app to test screen touch response and any bad areas and it helped me diagnose that it in fact was the screen having a fault...look up "touch test" in the appstore and it should narrow down where and if your screen has a bad area that's not responding...it helped to get my in-store replacement in and out the store since I could show them the issue right away along side an in-store model. I hope this helps and I that I read the post correctly. Let me know if it helps you.
Sent from my PG06100 using XDA App

My screen had a dead line going across the middle of the screen but only when swiping side to side, for some reason vertically it was fine....
unrooted, went to sprint store repaired in less than 30 minutes...

onefasttreopro said:
I actually had a similar issue with a replacement phone where the left side about 1/8" wouldn't respond (couldn't press q button on keyboard at all). After some research I found out about a great lil app to test screen touch response and any bad areas and it helped me diagnose that it in fact was the screen having a fault...look up "touch test" in the appstore and it should narrow down where and if your screen has a bad area that's not responding...it helped to get my in-store replacement in and out the store since I could show them the issue right away along side an in-store model. I hope this helps and I that I read the post correctly. Let me know if it helps you.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Awesome tip, dude. This will help me get a replacement for sure. The issue came back and this is solid proof it exists. Gonna make it hard for anyone to pretend there isn't a problem. Thanks!
Sent from my PG06100 using XDA App

No problem...glad to help...it definitely saved me time...I installed it on my phone and the stores phone and compared them side by side...that way they can't give you a BS answer of "screen needs calibration" etc etc. Lemme know how it goes.
Sent from my PG06100 using XDA App

Sorry didn't respond faster. I just called them and they sent me a new phone next day and I sent them the old phone. Easy as pie no problems with the reps or the techs they didn't argue about it at all. It did take a long time on the phone because they were checking the phone settings no sure what this was but oh well. Just remember to ruu back.
Killer Shift

So they ended up still pretending that there wasn't an issue, saying that maybe it was just the touchtest app. It took a while to convince them that it wasn't just an app.. but after I left it with them for an hour (an hour where I'm sure they did nothin) I came back and showed them the issue again, compared it to the shift that they had, and they finally agreed to order me a refurb. A hassle, but a necessary one.
Sent from my PG06100 using XDA App

Sounds like they just hated looking bad and that you had proven them wrong so they put up a wall...nonetheless I'm glad it ended up working out and hope the replacement phone works out for ya...
Sent from my PG06100 using XDA App

onefasttreopro said:
so they put up a wall...
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Agreed..It's awful how there is no set policies when it comes to service. Your fate pretty much rests with the tech you happen to get. Some are easy to get along with and some (obviously) aren't.
Sent from my PG06100 using XDA Premium App

The Refurb is great... oh, and FYI - don't use displex on touchscreens hahaha.

Is my screen dieing?

I keep getting random laginess and screen unresponsiveness. It doesn't seem to be rom specific as it has happened on cm7, myns 2.2, and now the rooted stock leak. There is a bright white spot that has been there since day 1 and that seems to be where it becomes most unresponsive. It also randomly scrolls and even the capacative buttons become unresponsive.
Help
Sent from my PC36100 using Tapatalk

flyboy1100 said:
I keep getting random laginess and screen unresponsiveness. It doesn't seem to be rom specific as it has happened on cm7, myns 2.2, and now the rooted stock leak. There is a bright white spot that has been there since day 1 and that seems to be where it becomes most unresponsive. It also randomly scrolls and even the capacative buttons become unresponsive.
Help
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
seems like your digitizer is lifting off the screen because mine would do the same until I fixed it by heating the screen with a hair drier for a bit then pushing the digitizer glass in around the edges.
The white spot is a very common defect-> my phone has it as well.
So its DIY or sprint tep to fix it. Good luck.

Problem with sprint is I think unless it does it all the time I don't think they will fix it. The closest store to me sucks, the last time I brought it in they told to just smash it because they wouldn't fix it. Maybe I will call customer service tomorrow as I don't see any physical defects, the screen is not lifting
Sent from my PC36100 using Tapatalk

Fresh warm 2.2 install, just did it again, so definetly hardware failure, I will call sprint tomorrow!
Sent from my PC36100 using Tapatalk

I tried the hairdryer thing, worked fine for 5 days, now the unresponsiveness is starting again, going to unroot and call sprint because u don't think there I'd a repair center near me
Sent from my EVO

Sprint is sending me a refurb. Gambling Iguess, but my phone is unusable right now.
Sent from my EVO

flyboy1100 said:
Sprint is sending me a refurb. Gambling Iguess, but my phone is unusable right now.
Sent from my EVO
Click to expand...
Click to collapse
Who knows you might get lucky , I wasn't. My original and refurb both have the screen issue but I can live with it. Just make sure to clean the screen regularly and u should be good.

I clean my screen daily, we will see. It is fine now, but an hour ago I couldn't do anything. Had to last really hard and beat on the screen to get it to work. 3 returns and you get a new one right?
Sent from my EVO

i have the light spot. Pretty sure its caused by heat. . Took it in and had the screen replaced by a repair center. It also had light leaks that also got fixed. The new screen is doing the light spots again though. I'm willing to to bet you have a novatec lcd panel. When it happened to me I took a pole and everyone who had this problem had the novatec over the epson. If my xoom does it ill be pretty pissed. My friend has a droidx that also has a light spot in the same area as my evo. Bottom middle, a little off center to the right. Am I right? Neither have screen unresponsiveness though.

flyboy1100 said:
I clean my screen daily, we will see. It is fine now, but an hour ago I couldn't do anything. Had to last really hard and beat on the screen to get it to work. 3 returns and you get a new one right?
Sent from my EVO
Click to expand...
Click to collapse
Actually for the screen I just turn it off and on and my problems go away.
This is actually my 2nd phone. First one the charging port broke off, I kept it and got a refurb. Then I dropped my refurb and cracked the screen. So I opened up and swapped my old evo's screen to my new one. Works fine, now.

boredmug said:
i have the light spot. Pretty sure its caused by heat. . Took it in and had the screen replaced by a repair center. It also had light leaks that also got fixed. The new screen is doing the light spots again though. I'm willing to to bet you have a novatec lcd panel. When it happened to me I took a pole and everyone who had this problem had the novatec over the epson. If my xoom does it ill be pretty pissed. My friend has a droidx that also has a light spot in the same area as my evo. Bottom middle, a little off center to the right. Am I right? Neither have screen unresponsiveness though.
Click to expand...
Click to collapse
Your right, its a defect in the novatech lcd, hence the change to epson lcd on newer hardware revisions

ok now that you mention it alex I do have screen unresponsiveness but I also fix by screen off then back on. Its random and I thought it was a cyanogen thing as I've been using that from for a long time now.

boredmug said:
ok now that you mention it alex I do have screen unresponsiveness but I also fix by screen off then back on. Its random and I thought it was a cyanogen thing as I've been using that from for a long time now.
Click to expand...
Click to collapse
I had the impression of it being the rom early on but after multiple flashes, its the hardware. I believe its due to the combination of lcd lifting and heat from the cpu. I had my swype keyboard on screen one day and noticed that the screen went berserk on/near the white spot on the lcd by watching the trace line

alexisprz said:
I had the impression of it being the rom early on but after multiple flashes, its the hardware. I believe its due to the combination of lcd lifting and heat from the cpu. I had my swype keyboard on screen one day and noticed that the screen went berserk on/near the white spot on the lcd by watching the trace line
Click to expand...
Click to collapse
Yup same here and I have a novatec. And turning the screen off and on doesn't have much affect. I have to do that 5 or 6 times, and run my thumbs from the bottom to the top pressing very hard, then it will start to work again
definitely not rom specific, as I am now completely unrooted running 3.70.
Maybe I will get get a refurb version 4
Sent from my EVO

flyboy1100 said:
Yup same here and I have a novatec. And turning the screen off and on doesn't have much affect. I have to do that 5 or 6 times, and run my thumbs from the bottom to the top pressing very hard, then it will start to work again
definitely not rom specific, as I am now completely unrooted running 3.70.
Maybe I will get get a refurb version 4
Sent from my EVO
Click to expand...
Click to collapse
Wow that sucks, I never had to go to those extremes when my screen acted up, good luck.

How do I tell what screen my new one has?
Sent from my EVO

So far no issues, figures, call for replacement and get it ordered and now my screen has been fine
Sent from my EVO

Acted up twice today, so glad a replacement is on the way
Sent from my EVO

how many refurbs do i have to go through before i get a new phone? 1 down so far.