Back Button Powers off screen? - HD2 Android Q&A, Help & Troubleshooting and Genera

I've been using android exclusively for the pass few days and have been really impressed with the progress that has been made on the HD2. I now find this phone to be less intolerable than when it was on wm6.5.
I have noticed i am using the hardware buttons a lot more in android. One problem i have though is that often when I use the "back" button it turns off the screen about maybe 30 percent of the time or so. I believe this because the buttons are not separate pieces but connected?
anybody else experiencing similar issues? Any fixes out there? Sorry if this has been addressed already in a different thread.

You have fat fingers

actually i have very skinny fingers. i only weigh 115 lbs. I have something else that is quite thick but if i used it on my phone i might crack the screen haha.
seriously though no one else is having this problem?

I think it's a hardware problem, maybe something (probably dirt) is stuck under your buttons?

I have similar problems with the back and middle button. It seems to be from them wearing out, which is happening a lot quicker since using android because the buttons are more necessary for operation. I've always been very gentle with my buttons, too. My phones in perfect condition except for the button issues. There's a couple threads around about the hard buttons wearing out... I don't think they were manufactured all that well personally... they don't seem all that stable. Most people don't have problems, but many have. Most newer android phones seem to use capacitive buttons. They are probably more stable that way, don't wear out easily, and have less manufacturing defects.
I've been thinking of sending mine in for warranty repair, because mine are progressively getting worse... yours might too. Or you can maybe set your volume keys as the back key. It would be great if some sort of onscreen back key could be made as that is probably my most used button.

Related

G1 problem - Buttons sinking?

The face buttons on my G1 seem to be retreating into the holes around them slightly.
I have big fingers so it is getting to be a chore to press those buttons; especially considering that the buttons were flush to the face to begin with.
I would show a picture of it, but the sinkage isn't so bad that you can see it, but I definitely feel it.
Anyone else having this problem? Its there a way to fix this? Is there any kind of product that extends the buttons so they are easy to press?
My power and back buttons feel slightly recessed (which would make sense as they're the ones I use most). It is kinda annoying, but I doubt there much we can do without opening the phone

Problem with the buttons..

I had this HD2 for almost 2 months now.. and the leftmost button is now tad lower compare to the rightmost..and SOMETIMES it does not register the tactile...
I had checked some of my friends HD2 and it's getting the same problem...the leftmost is really just a tad lower..but their lowest button STILL works..is it because mime is the oldest ?
ANyone having the same observation and thus the problem..????
My on/end call button also feels very spongy (brand new handset). I will try and return it in the next couple of days...
I had three of these (sold the fourth unopened) and two of them had dodgy buttons, the other was perfect. I suspect it's mass-production that's to blame but ultimately the buttons do feel 'cheap' on the HD2 and definitely let the side down.
Been using long_press much? its sort of natural to press pretty hard, could account for it.

Capacitive button fix???

I have read a lot about the capacitive buttons on N1 being a little faulty.... it responds only when clicked on the upper half of the button... Just wondering if some developer here already found a fix for that...
If not, then is this a hardware limitation or some software glitch?
I think it's a hardware limitation. Once you get used to it it's just fine, but I agree it bothers me sometimes to have to touch it twice.
Some ROMs keep adding and removing the capacitive fix.
I dont see a problem.
You have to accept that they are different buttons.
-> On the screen I tab softly..
-> The cap.buttons, I hold my finger... (never tab it)
When you forget this, you tab on them like on your screen icons and you got to tab more times and start worrying about them...
I believe the capacitive button bug was fixed with google official OTA update.
I clearly had it before (had to hit on the upper part of the buttons) and now it's gone since the update
You can fix it? Mine is still like before.
waanz said:
I believe the capacitive button bug was fixed with google official OTA update.
I clearly had it before (had to hit on the upper part of the buttons) and now it's gone since the update
Click to expand...
Click to collapse
are you serious ???
Yea mine are fixed too on cyan's latest.
faraz1992 said:
I have read a lot about the capacitive buttons on N1 being a little faulty.... it responds only when clicked on the upper half of the button... Just wondering if some developer here already found a fix for that...
If not, then is this a hardware limitation or some software glitch?
Click to expand...
Click to collapse
They work fine if you just aim a tad high on the button. You adjust quickly.
What about the "area expansion fix"??
I have just upgraded to 2.2.. It still has problems with only the top half of the soft buttons being sensitive. I have also noticed that unless I'm holding the phone or touching the metal casing the buttons don't really work at all. It seems like a hardware issue. Although I do have thick skin from playing the guitar and rockclimbing. So I'm probably not as capacitive as the avarage user. Just wondering if anyone else has the same problems or even a fix?
Yeah I have to hit the upper part of the button as well. I would be interested in finding a fix for this too....
I'm running the stock OTA 2.2.1 rom right now if that helps any.
There is no fix, and the problem exists for all N1s ever produced. Hit the buttons on their top side.
I disagree, I hit mine bang on the graphic. Originally I did have to use the top but an update did fix it.
yeah there is no software fix for this its a hardware issue, i have to press mine on the top half, its never really bothered me though because most of the time i use my thumb and its so large it never misses the buttons hehe
i'd be curious to know though if the ones claiming that its fixed on their N1's how old their N1's are the newer ones may have a different touchscreen that had this issue fixed if its even possible to fix, if you look at the width of the screen border at the sides that is about equal to distance of the dead zone at the bottom of the glass so my guess is its by design and they may not have even been able to make that area of the glass touch sensitive due to how close to the edge of the glass it is
Rusty! said:
I disagree, I hit mine bang on the graphic. Originally I did have to use the top but an update did fix it.
Click to expand...
Click to collapse
try to press them at the lower half only pressing on the graphic works fine on my N1 most of the time, pressing right above the graphic always works. if i try with my index finger to press the lower part of any of the graphics it never works.
Anyone on cyanogen vouch for it being a software issue.
It's not software. I've had 2 N1's, and both do this.
I've disassembled one of the N1's about 10 times, and I've seen the under-side of those capacitive buttons. The part that detects the finger is really small. Probably 1cmx1cm box. And it's naturally placed a tad bit above the actual icon on the capacitive button. Just hit the button with your entire finger, not just the tip, and it will be fine.
Or keep crying about it. It's not ever going to be fixed. It's the way the phone was manufactured.
Frito11 said:
try to press them at the lower half only pressing on the graphic works fine on my N1 most of the time, pressing right above the graphic always works. if i try with my index finger to press the lower part of any of the graphics it never works.
Click to expand...
Click to collapse
Yeah lower portion is no-go, but dead center is bang on each time.
Rusty! said:
Yeah lower portion is no-go, but dead center is bang on each time.
Click to expand...
Click to collapse
Same here no problem at all on the graphic
Sent from my Nexus One using XDA App

A question for Omnia 7 owners about the capacative buttons

I was curious whether the buttons are easy to trigger by accident.
On my Nexus S and the Focus, there is a subtle upward curve at the bottom of the phone. This small lip seems to prevent a lot of accidental presses of the capacitive buttons.
In my experiences with a completely flat face phone (the HD7), accidentally pressing the capqcitive buttons was extremely common and annoying. I like the looks of the Omnia 7 more than the Focus, but if it leads to similar problems as the HD7 (always pressing the buttons by accident) then I'd rather go with the focus.
For me that's one of the most annoying things about the phone. I hit the search button all the time.. But some say there will be a firmware update to fix that.
singularity0821 said:
For me that's one of the most annoying things about the phone. I hit the search button all the time.. But some say there will be a firmware update to fix that.
Click to expand...
Click to collapse
That's exactly what used to happen to me with my HD7. When I held the phone part of my thumb would be on the bezel and it would hit the search button. Also, when I held the phone in landscape my finger would also hit it.
With the Nexus S I don't run into this problem because the bottom is curved a bit. I've also played with the Focus a bit and it seems to have this slight curve at the bottom as well.
yup same thing here, this is when I spend time try to browse through apps and use my phone when it was still new. now i got the hang of it, and i dont really fiddle it as much as before now, just a basic need. and i got what a really wanted, fast and responsive phone.

[Q] Wobbly volume buttons on GNote3.

First off I want to start by saying that this is potentially the best piece of technology I have ever bought. I am in LOVE with the flexibility of Android (brand new iOS switch over) and the raw power and hardware of the N3.
I bought this beast a couple of days ago and I instantly noticed that the home button was a bit wiggly if I tried hard to make it wiggle. Needless to say I ran to the web and found that may others have been having the same issue but its not a deal breaker in any way. I have come to terms with it and it no longer bothers me.
What I also noticed was that the volume buttons are quite loose and shake quite a bit if I move them around with my finger. I can also hear them rattling a little bit if I shake the phone and if it vibrates there is a slight sound. Is this also standard with all N3's or are my volume rockers a one off case?
I am under a replacement warranty and getting a new piece should be no issue, but if this volume issue is a common one then I wont bother as everything else is working perfectly and I don't want to risk running into different problems with another N3.
floko127 said:
First off I want to start by saying that this is potentially the best piece of technology I have ever bought. I am in LOVE with the flexibility of Android (brand new iOS switch over) and the raw power and hardware of the N3.
I bought this beast a couple of days ago and I instantly noticed that the home button was a bit wiggly if I tried hard to make it wiggle. Needless to say I ran to the web and found that may others have been having the same issue but its not a deal breaker in any way. I have come to terms with it and it no longer bothers me.
What I also noticed was that the volume buttons are quite loose and shake quite a bit if I move them around with my finger. I can also hear them rattling a little bit if I shake the phone and if it vibrates there is a slight sound. Is this also standard with all N3's or are my volume rockers a one off case?
I am under a replacement warranty and getting a new piece should be no issue, but if this volume issue is a common one then I wont bother as everything else is working perfectly and I don't want to risk running into different problems with another N3.
Click to expand...
Click to collapse
Not seen any issues regarding Volume buttons being dodgy, only the home button. (only a small percentage tho) - Guess you just got a lemon unit, it does happen from time to time with any hardware.
I've got no problems on the home button or the volume buttons or the power button. Once you put a case on it you won't notice if it's just minor. But if it's bad, is get it changed. ..?
Sent from my SM-N9005 using Tapatalk

Categories

Resources