So i have probably flashed my phone around twenty times, and each time something goes wrong or doesnt work, i have to use Odin and flash back to stock, do the JI6 update, install OCLF, root it, flash clockwork recovery, then try and flash another rom.
My concern is that it takes forever to do his process everytime. Is there an easier way to do this? Do you need to have JI6 before flashing a 2. 2 rom? Do you need root to install a custom rom? Or can you just copy over clockworm recovery to sd? Any info will help, thanks.
Sent from my SGH-T959 using XDA App
I've flashed my phone with every rom I could find. I was using ClockworkMod Recovery to do my flashing and never had a problem. but if you flash a 2.2 rom.... you can't go back to 2.1
Unless you open Odin and have your phone set to Download mode.
Use these files and click START
PIT- s1_odin_20100512.pit
PDA- T959-PDA
PHONE- T959UVJFD
Then your phone will be rolled back to 2.1 update1 STOCK.
I had to use this 4 times. It works.
**If you have a Nandroid Backup of a rom running 2.1 You can't use that to roll back**
YOU WILL BRICK IT UP!
Annex1 said:
I've flashed my phone with every rom I could find. I was using ClockworkMod Recovery to do my flashing and never had a problem. but if you flash a 2.2 rom.... you can't go back to 2.1
Unless you open Odin and have your phone set to Download mode.
Use these files and click START
PIT- s1_odin_20100512.pit
PDA- T959-PDA
PHONE- T959UVJFD
Then your phone will be rolled back to 2.1 update1 STOCK.
I had to use this 4 times. It works.
**If you have a Nandroid Backup of a rom running 2.1 You can't use that to roll back**
YOU WILL BRICK IT UP!
Click to expand...
Click to collapse
What if that rom includes a kernel?
Constantly Drinking
jzero88 said:
So i have probably flashed my phone around twenty times, and each time something goes wrong or doesnt work, i have to use Odin and flash back to stock, do the JI6 update, install OCLF, root it, flash clockwork recovery, then try and flash another rom.
My concern is that it takes forever to do his process everytime. Is there an easier way to do this? Do you need to have JI6 before flashing a 2. 2 rom? Do you need root to install a custom rom? Or can you just copy over clockworm recovery to sd? Any info will help, thanks.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Who's the stupid person who told you to flash JI6 first to go to 2.2?
jzero88 said:
So i have probably flashed my phone around twenty times, and each time something goes wrong or doesnt work, i have to use Odin and flash back to stock, do the JI6 update, install OCLF, root it, flash clockwork recovery, then try and flash another rom.
My concern is that it takes forever to do his process everytime. Is there an easier way to do this? Do you need to have JI6 before flashing a 2. 2 rom? Do you need root to install a custom rom? Or can you just copy over clockworm recovery to sd? Any info will help, thanks.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
yeah ...
I have no clue how you could be having this much trouble... are you following the guides?
First off you don't need to wait for the ji6 / flash the ji6 update to get to froyo. 2nd, why are you bothering with the lag fix before getting on the rom you want to run daily? Try to keep your flashes clean. By this I mean once you're odin'd back to stock, just flash 2.2, so there's no weird mods messing things up for you. If you're finding things wrong every time you have to eliminate as many variables as you can that could potentially cause something to go wrong. If you flash straight from stock, you're only variables will be within the 2.2 ROM you're flashing. Hope this helps. It's definitely worth it to get on one of the froyo roms in these forums, I recommend Axura, no problems at all and there's an even newer release than I'm running so it might be even better.
I did a backup with 2.1 update1 stock. Then flashed to 2.2 Obsidian V4.
That's my first flash and I only got the phone for two weeks. So apparently
I was still in learning mode. I did not backup my contacts as I thought
I could easily go back to 2.1 just as if having a dual bootable linux box.
However, after restoring to 2.1, the phone did not boot. It appears that I
have to use ODIN to bring it back. But my concern is I will lose my contacts
once 2.1 is back. So my questions are:
1. if I use odin, will I lose my contacts?
2. is there any other way to let the phone boot?
3. Not sure if my case falls into the category that flash to 2.2 then cannot
go back to 2.1 unless odin is used.
Sorry for asking so many questions.
Many thanks in advance.
Annex1 said:
I've flashed my phone with every rom I could find. I was using ClockworkMod Recovery to do my flashing and never had a problem. but if you flash a 2.2 rom.... you can't go back to 2.1
Unless you open Odin and have your phone set to Download mode.
Use these files and click START
PIT- s1_odin_20100512.pit
PDA- T959-PDA
PHONE- T959UVJFD
Then your phone will be rolled back to 2.1 update1 STOCK.
I had to use this 4 times. It works.
**If you have a Nandroid Backup of a rom running 2.1 You can't use that to roll back**
YOU WILL BRICK IT UP!
Click to expand...
Click to collapse
Ok i'm confused on how you will lose contacts.
When you add contacts to your phone are you choosing "google" as the place to add it? If you choose "phone" then you will lose contacts as data is wiped.
But always choose "google", then all of your contacts will be synced and stored to googles servers. Then once you add your google account after you flash your rom all of your contacts will be synced right back to your phone..... this is what I do and I always have my contacts no matter what
install check list
OCLF (Root only)
Rom Manager (clockwork recovery + Rom Installer)
thats all you need really for quick installs.
I did my first rom install about a week ago, since then i've flashed 4 different ones, havent had any issues. i tend to stick to installs that can be installed via clock work, Used odin 1 time that was because OTA JI6 broke me.
Obsidian V4 is unstable and was pulled from the public download page for revisions try V3 or Onyx R3.1
as for contacts, you don't have them synced Via gmail or atleast backed up on your sim?
Just so everyone knows there is a stock 2.2 for use with ODIN. No need to go back to stock 2.1 then up to 2.2 again. The 2.2 for ODIN is pre-rooted. I have done this twice now with no problems. Haven't needed One Click Root/Unroot since we got 2.2
It might be a little late to know this. But to be honest, I do not really buy into
the concept of putting everything in google's hand. That's why I chose to
save in the phone other than google.
I thought that by backing up the current ROM (2.1 update1 in my case),
I should be able to restore back to it whenever I want to.
Am I doomed? Really hate to shoot everybody an email asking for their
numbers. And worse, some of them don't have email since they are old
eminembdg said:
Ok i'm confused on how you will lose contacts.
When you add contacts to your phone are you choosing "google" as the place to add it? If you choose "phone" then you will lose contacts as data is wiped.
But always choose "google", then all of your contacts will be synced and stored to googles servers. Then once you add your google account after you flash your rom all of your contacts will be synced right back to your phone..... this is what I do and I always have my contacts no matter what
Click to expand...
Click to collapse
so far obsidian v4 has not given me any trouble, but I will give V3 a try later
to make sure I have at least one stable version.
As for contacts, I did not take it too seriously when I flashed to 2.2.
But now I realize it's a lot hassle to get all numbers back if I can remember
who are on my list.
Is there any hope to save my a**?
boystuff said:
install check list
OCLF (Root only)
Rom Manager (clockwork recovery + Rom Installer)
thats all you need really for quick installs.
I did my first rom install about a week ago, since then i've flashed 4 different ones, havent had any issues. i tend to stick to installs that can be installed via clock work, Used odin 1 time that was because OTA JI6 broke me.
Obsidian V4 is unstable and was pulled from the public download page for revisions try V3 or Onyx R3.1
as for contacts, you don't have them synced Via gmail or atleast backed up on your sim?
Click to expand...
Click to collapse
Thanks for all the replies but to be clear all my custom flashed roms flash successfully. Nothing wrong with flashing, just doing advanced stuff like testing eugenes kernels with other roms. If something goes wrong then i have to start over. I was just wondering if we can go from stock to 2. 2 which i know now we can. Do you need root to do this or can you just copy the update. Zip of the clockwork recovery to sd and get into it from stock recovery to flash the new rom
Sent from my SGH-T959 using XDA App
Ive been using gmail as my contacts backup since 06 when it was beta invite only. Synced via active sync on my windows mobile 5,6 and 6.5 phones with ease its just always made more sense then outlook or sim cards since i could access it anywhere i had internet.
Give it a shot doesnt hurt to always have atleast 1 backup
Sent from my SGH-T959 using XDA App
Related
I just had my phone rooted on tuesday by a friend. It started turning itself off for the first few hours and went back to normal for a day. Last night it started turning itself on and off every minute. I know nothing about phones, can anyone help me?
How did your friend root?
Did they delete system apps?
Did they apply lag fixes?
Perhaps just flash a custom rom. Their better than stock and should fix your issue. I hope they didn't do a lag fix. Disable it if they did.
He did something like holding the power button/volume up/down to get into download mode? That's all i know. He said he didn't remove any of the system apps, or change anything. He added a wifi-tethering for me, that's why he rooted it. I know nothing about phones and computers. I'm out of town for another week so i can't have him fix it, but i need to do something so i can use my phone. Any suggestions?
oh ya, he used ODIN if i remember right
I don't know why he would be using Odin if all he was doing was rooting the phone. Can you get to the web to DL anything? I would try flashing something with clockwork till you can re-flash to stock with Odin. You need to find out what exactly your friend did when he worked on your phone.
Can you adb? I would like to see the log.
Sent from my Bionixed SGH-T959 using XDA App
my phone wont stay on long enough to do anything. When i push the power/up/down buttons at the same time i get a picture of a droid and it says power reset or unknown upload mode
whats adb? I'm a preschooler when it comes to anything computer/phone related
I was getting panic mode/upload when I was messing with eugenes kernals.
intruda119 said:
I was getting panic mode/upload when I was messing with eugenes kernals.
Click to expand...
Click to collapse
As was I, and that's the only time I've seen that screen.
OP, you're friend definitely did more than simply root your phone. Especially if you say he used Odin? There's no reason to use Odin to gain root.
I would recommend you Odin back to stock and start fresh.
is there any way i can do it without Odin? I'm out of town for a week and need my phone
Rom manager / clockworkmod. Just go to the app store (it's free) and download it. Flash the recovery and flash back to stock 2.1 eclair. It should fix it then when you get home just use the one click root method to root your phone. Check the vibrant bible in android dev. to do it, it's really easy to do yourself since it is literally, one click ^_^ Also for the rom of 2.1 I also recommend going to the vibrant bible for that as well. All you have to do is dl rom manager, put the 2.1 rom on the root of your sd (not external sd) then go into rom manager and install custom rom (pick the stock 2.1). It will wipe your data but your phone should be fixed and you can always dl back your apps and import contacts through your gmail account. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=740077
that's eugene's stock 2.1 for vibrant flashable through clockworkmod ^_^
I just bought my Epic 4G a few days ago and quickly discovered the existence of rooting and custom ROMS. Needless to say I took the plunge the other day.
I attempted to install the Epic Experience Froyo yesterday but it doesn't seem to load up properly.
Seemed simple enough. I boot into clockwork, I cleared data/factory cache, cache partition, and davnik cache three times each. I installed the ROM from my SD card, install says it's successful, so I hit the reboot.
After this I expect my new rom to load up but all that happens is the samsung logo comes up for about a minute, phone reboots again and goes into the factory Android system recovery utility.
Any ideas? Please help, my phone is inoperable at the moment.
-Dennis
Sounds like kernel. Dl a costume kernel and flash it thru cwm.
Sent from my SPH-D700 using Tapatalk
I'll have to apologize ahead of time because I'm completely new to rooting.
Which kernel should I use (a link to one with instructions would be helpful), and how do I get it on my SD card if it isn't booting up? (my pc doesn't have an SD card reader)
Did you first use odin to install the DK17 modem and kernel through odin? That might be the step youmissed because if you just flashed straight from stock 2.1 to epic experience you need the updated froyo modem and kernel. Check here if you're still confused.
http://forum.xda-developers.com/showthread.php?t=853209
So, flash Odin/DK17 and then flash Epic Experience over this?
Ya also did you first do the one click root method to make sure you are definitely rooted? If you press. Volume down + camera button + power when booting and the letters are blue you are NOT rooted. If they are green then you are rooted. Sometimes when you install a rom it might take away your root so you might try doing it in the order of this:
1. Flash back to stock 2.1
2. Do theone click root method
3. Flash DK17 modem through odin
4. Install Epic Exprience
hgvidal said:
Did you first use odin to install the DK17 modem and kernel through odin? That might be the step youmissed because if you just flashed straight from stock 2.1 to epic experience you need the updated froyo modem and kernel. Check here if you're still confused.
http://forum.xda-developers.com/showthread.php?t=853209
Click to expand...
Click to collapse
I went straight from 2.1 to 2.2 firmware without using odin or anything of the sort. Will I notice a difference? If so what difference will it make and can I just install DK17 modem and kernel or do I have to revert back to 2.1 first?
idontwanttostudy said:
I went straight from 2.1 to 2.2 firmware without using odin or anything of the sort. Will I notice a difference? If so what difference will it make and can I just install DK17 modem and kernel or do I have to revert back to 2.1 first?
Click to expand...
Click to collapse
Hm that is interesting. When i first made the mistake of going from to a 2.2 rom without upgrading the modem my cell & data service wouldn't work. It kept looping on and off and would not stick. Maybe it depends what rom you went to as maybe some require the modem as mandatory and others do not? I am not sure. But if its working for you, you should just be able to flash the DK17 through odin without going back to 2.1.
hgvidal said:
Hm that is interesting. When i first made the mistake of going from to a 2.2 rom without upgrading the modem my cell & data service wouldn't work. It kept looping on and off and would not stick. Maybe it depends what rom you went to as maybe some require the modem as mandatory and others do not? I am not sure. But if its working for you, you should just be able to flash the DK17 through odin without going back to 2.1.
Click to expand...
Click to collapse
I just did it today with the newest froyo version out by chance would it come with them? If not where can i get them? I cant seem to find the modem to dl
How can i tell by looking in my phone if i have it or not?
idontwanttostudy said:
How can i tell by looking in my phone if i have it or not?
Click to expand...
Click to collapse
Go to settings -> about phone and then check where it says "Baseband version" it should say DK17 in there. If it doesnt follow these instructions to download the files you need. It has step by step directions
http://www.nomie.mobi/how-to-install-dk17-modem-samsung-epic/
I assume this is the rom you flashed:
http://forum.xda-developers.com/showthread.php?t=856715
In the first post it has a link to the instructions to properly flash the rom. You can use those instructions to flash the modem and see if it fixes your problem. You might be better off just flashing everything again. It would mean downloading odin and the files to your pc and flashing them to your phone from your pc. The simplest way to do this is follow this thread
http://forum.xda-developers.com/showthread.php?t=853209
Follow the instructions carefully and when your done you have the new modem, the froyo rom, clockwork recovery, and be rooted.
I was at the site earlier but when i click the dl link it takes me to some wordpress and tells me registration is currently not allowed then asks for a username and password
@Raylusk can i do this method even if i am running the 2.2 firmware? Or would i have to revert back to the original is so how do i do it?
idontwanttostudy said:
I was at the site earlier but when i click the dl link it takes me to some wordpress and tells me registration is currently not allowed then asks for a username and password
@Raylusk can i do this method even if i am running the 2.2 firmware? Or would i have to revert back to the original is so how do i do it?
Click to expand...
Click to collapse
You can do it running 2.2. This will wipe your phone and install the new system.
Sent from my SPH-D700 using XDA App
raylusk said:
You can do it running 2.2. This will wipe your phone and install the new system.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Ok I finally have it all worked out thanks a lot!
hgvidal said:
1. Flash back to stock 2.1 [through odin]
3. Flash DK17 modem through odin
4. Install Epic Exprience
Click to expand...
Click to collapse
I actually skipped step 2 and everything went fine for me. My laptop was being an asshole and not seeing the phone, so the 1 click root script simply wasn't working.. but then I realized that the DK17 flash via Odin that I got form the epic experience thread included clockworkmod and was pre-rooted and everything so I saw that step as unnecessary.
EDIT: Ok so I flashed it back to 2.1 stock, i'm gonna try flashing Bionix again, is there something I should do before flashing it? Am I in the wrong version or something? Help!
Ok so here's the situation:
I was running Axura 2.0.3 or something and things were ok, but I wanted to flash to something better, so I downloaded the Bionix Frost 2.2.1 ROM and flashed it. It didn't have any of my contacts or SMS so I went to flash it back to my last backup, which was 12/15/10, and Axura. I go to Clockwork Mod, and run the nandroid backup and now when my phone boots up, it goes through the screens, and freezes on the Galaxy S screen, then everything turns black and when I touch the screen, all the bottom buttons light up, but nothing happens, and the only way to get that to turn off is to pull the battery.
Is there any way I can fix this? I have Odin, but i'm not sure exactly what to do here.
flash a kernel. nandroid does not restores kernel.
Sent from my SGH-T959 using XDA App
First things first, calm down.
This is not hard, but it can seem that way if you freak.
Did you read the guides? Did you download rom manager, flash cwr, go to stock recovery and reinstall packages (twice maybe)?
i really think it's about flashing a kernel.
Sent from my SGH-T959 using XDA App
So what kernel do I need? I'm back at full 2.1 stock, and I want to get back to my Axura 12/15/10 nandroid, do I need a kernel?
That axura is 2.2 right? So any 2.2 kernels should be fine,
flash nandroid then before rebooting flash kernel.
In the phone information it says my Kernel is 2.6.29? It says firmware version is 2.1update 1.
If I just want to flash to Bionix, do I need to update a kernel or can I just go straight ahead and do that?
yes. you don't need to flash a kernel when you flash bionix.
You only need to flash a kernel when you are restoring a nandroid backup.
Thanks, you helped a lot.
One last question: how do I move my contacts and SMS over? Whenever I flash a new ROM I seem to lose it.
xKrazYx626 said:
In the phone information it says my Kernel is 2.6.29? It says firmware version is 2.1update 1.
If I just want to flash to Bionix, do I need to update a kernel or can I just go straight ahead and do that?
Click to expand...
Click to collapse
2.6.29 froyo .....u need 2.1 eclair kernel !!!!!
What if when rebooting to recovery re-installing packaged always end up in failure? Should I go ahead and flash a rom?
Sent from my SGH-T959 using XDA App
I Think i have bricked my nexus s ......it wont startup and goes to do first setup but force closes....i can access recovery but when i flash a rom it aborts ....only just bought it
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
afishpie said:
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please can you elaborate...or point me in right direction......recovery is now only accessible by flashing it first....phone just wont do anything
download a 2.3.3 nandroid backup and restore to it using clockwork recovery
ignore odin.
http://forum.xda-developers.com/showthread.php?t=884093
update to 2.3.3 using http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip
or just download CM7 and flash that along with gapps (wipe dalvik/cache/factory)
and your phone is not bricked. the definition of a bricked phone is a phone who cannot access recovery/fastboot/etc.. can access absolutely nothing
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
distortedloop said:
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
Click to expand...
Click to collapse
Many thanks to both of you.....for your help .....so much appreciated......i have got past first setup screen after applying a nandroid backup......it finally worked after 5 times trying....but i have stock android recovery but rom manager on phone .....how can i get clockwork mod back as everytime i flash it.....i get to use it for that one instance ans then it returns to stock android recovery
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
menov321 said:
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
Click to expand...
Click to collapse
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
sano614 said:
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
menov321 said:
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
Click to expand...
Click to collapse
No it doesn't. You're fine. The latest is android 2.3.3 with GRI40.
Sent from my Nexus S using Tapatalk
My brother and I both have a Vibrant. He broke his so I loaned him mine for a week. While he had mine (which I've upgraded to 2.2), he installed Android 2.1 Voodoo 4 on it. Little to say, after rebooting, the phone wasn't booting past the boot screen.
I've now followed some instructions from the forum, and have reflashed my phone with Eugene's non-bricking ROM through Odin. The phone boots up just fine now. However, I am trying to install ROM Manager on the phone, so I can reflash my recovery ROM (non Voodoo) - and the Android market tells me it can't install the app due to not having enough free space - though I have over 1GB.
I am guessing this is because the internal disk is still setup in the Voodoo file system, and just enough space was repartitioned for the OS to go back on.
Can anyone help me restore my phone?
EDIT: I've also tried flashing a different recovery ROM through ODIN (with repartition), which also wouldn't let me get past the bootup screen.
I'm taking a wild guess here, I seriously don't know, but did you click repartition in Odin? I think that's would work, but like I said, I'm not completely sure.
I didn't repartition for the Eugene rom fix (as per the instruction I read), but did when I tried to load another version ontop of that.
I was in the Voodoo chatroom, and was able to get some help. It sounds like I need to download a stock ROM and then reset my file partition to get rid of the EXT4 partition, and reset it all to the default.
I have Eugene's "non bricking" rom, but I don't think that's what I need. Can anyone point me in the right direction of what I need and how to do this?
Just search for the stock Odin images and flash back. They should be in a sticky. I would repartition as well.
I am trying to find a stock version I can ODIN flash. Do you know where I can get one?
http://forum.xda-developers.com/showthread.php?t=848737
I've gone through ODIN, done a reflash to the stock firmware, and repartitioned the phone as well.
Now, when I boot the phone up, I get the T-Mobile screen and the Galaxy S screen, and then the phone goes black (with no lights on) and doesn't go any further. My phone has been sitting on the desk like this for 20 minutes now.
I am wondering if this is like when moving to Voodoo, it takes a while to change the format to EXT4, is the phone having to go back to the default?
I 1am into the same problem with the old voodoo. What you'll need to do is flash back to stock via odin. Ur apps memory will be real low. Flash an old 2.1 voodoo. Let it do its thing once booted put a disable voodoo file into the folder and reboot. It will be ok after that. Hope that makes sense.
Sent from my SGH-T959 using XDA App
this thread might help
http://forum.xda-developers.com/showthread.php?t=848737
fatboy547 said:
I 1am into the same problem with the old voodoo. What you'll need to do is flash back to stock via odin. Ur apps memory will be real low. Flash an old 2.1 voodoo. Let it do its thing once booted put a disable voodoo file into the folder and reboot. It will be ok after that. Hope that makes sense.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Thanks fatboy, but I can't even flash back to stock. The phone won't boot up.