Database Users

I"m stuck in the Bootloader

Hey guys ! i have tried to Install the ROM and when it install the program stop and now i stuck in the bootloader i can't go into my mobile anymore how and it said not allow 00028002 plss help me guys !

Have you installed HSPL? Which spl version is showing in bootloader?Which rom are you trying to install and which method of installing are you trying?
You need to provide more info if anyone is going to be able to help you. All is not lost, the fact that you are still in bootloader means this can be recovered.

I installed HSPL and SPL-1.42.0000 and i tried to install English ROM cause i bought it from my friend and language is Russian :| and i want change it into english !

can u even get into the 3 color screen by using VolDown button?

Maxnguyen said:
I installed 2 HSPL and i tried to install English ROM cause i bought it from my friend and language is Russian :| and i want change it into english !
Click to expand...
Click to collapse
As i asked earlier, what spl version is showing in bootloader? Many people think they have installed hspl2 but they have in fact not done it properly, hence my question.
There are also many many different english roms, so of these, which one are you trying? Again please provide the details otherwise you make it almost impossible for anyone to help you without guessing.
Edit: Ok I see from your earlier reply (which you have since edited) that you have spl 1.42.0000 - that is not hspl that is a stock spl and that's probably why the rom does not install. You need to use 1.42.hspl.

hOW TO INSTALL THE hspl ???

bountygiver said:
can u even get into the 3 color screen by using voldown button?
Click to expand...
Click to collapse
yes i can ! And now i stuck in that i can't even go into my mobile !

ClydeB1 said:
As i asked earlier, what spl version is showing in bootloader? Many people think they have installed hspl2 but they have in fact not done it properly, hence my question.
There are also many many different english roms, so of these, which one are you trying? Again please provide the details otherwise you make it almost impossible for anyone to help you without guessing.
Edit: Ok I see from your earlier reply (which you have since edited) that you have spl 1.42.0000 - that is not hspl that is a stock spl and that's probably why the rom does not install. You need to use 1.42.hspl.
Click to expand...
Click to collapse
It's a English Europe ROM and now i even can't connect my phone to computer because i stuck in the Bootloader with tri colour

Here is the problem :
1/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
2/
[/IMG]
3/AND I STUCK HERE I EVEN DUN NEED TO PRESS VOLUME DOWN BUTTON !
[/IMG]
4/ I FOUND OUT SOMETHING NEW WHEN I RESTART THE PHONE I PRESS THE VOLUME DOWN BUTTON AND I GOT THIS !
[/IMG]

when phone is in three color screen
1 - connect to usb
2 - run hspl2
3 - choose your hspl
DO NOT choose one that ends .0000
DO choose one that ends.hspl
4 - when phone restarts, go into bootloader (three coloured screen) make sure that next to spl it says x.xx.hspl and NOT x.xx.0000
5 - with phone in bootloader, connect again USB
6 - flash your rom.
7 - if the rom requires a different radio, flash teh radio, just like the rom.

samsamuel said:
when phone is in three color screen
1 - connect to usb
2 - run hspl2
3 - choose your hspl
DO NOT choose one that ends .0000
DO choose one that ends.hspl
4 - when phone restarts, go into bootloader (three coloured screen) make sure that next to spl it says x.xx.hspl and NOT x.xx.0000
5 - with phone in bootloader, connect again USB
6 - flash your rom.
7 - if the rom requires a different radio, flash teh radio, just like the rom.
Click to expand...
Click to collapse
i DID LIKE WHAT YOU SAY IT'S WORK BUT WHEN IT'S INSTALL MAYBE 10% AND THE SCREEN BECAME DARK AND IT RETURN TO THE OLD SPL-1.42.0000 :| I WAS CHOOSE 2.08.HSPL AND THEN I GOT spl-2.08.HSPL 8G XE BUT WHEN THE SCREEN BECAME DARK IT'S BACK TO SPL-1.42.0000

sounds like you are flashing a stock rom from sd card, , the first thing that happes is the hspl gets overwritten by the stock 1.42.0000 and so teh rest of the flash fails.... use USB not SD
If you 'think' you already are using USB, then you have left leoimg.nbh on your sd card, , , get rid of it.

Maxnguyen said:
i DID LIKE WHAT YOU SAY IT'S WORK BUT WHEN IT'S INSTALL MAYBE 10% AND THE SCREEN BECAME DARK AND IT RETURN TO THE OLD SPL-1.42.0000 :| I WAS CHOOSE 2.08.HSPL AND THEN I GOT spl-2.08.HSPL 8G XE BUT WHEN THE SCREEN BECAME DARK IT'S BACK TO SPL-1.42.0000
Click to expand...
Click to collapse
Hi
1. When it is on Bootloader connect usb
2. Run HSPL2
3. Select 1.42 hspl
4. When HSPL successful you will see on the bootloader spl name is changed
Then
5. Download a rom and the Latest radio from this forum
6. Get bootloader and flash the radio first
7. then flash the rom
DO NOT FLASH THE STOCK ROM FROM A CARD
It will change the spl
Good luck

samsamuel said:
sounds like you are flashing a stock rom from sd card, , the first thing that happes is the hspl gets overwritten by the stock 1.42.0000 and so teh rest of the flash fails.... use USB not SD
If you 'think' you already are using USB, then you have left leoimg.nbh on your sd card, , , get rid of it.
Click to expand...
Click to collapse
u mean delete the LEOIMG.bnh in SD card and take it off so how can i flash without put it into SD card ??

You don't even need HSPL on your phone if you are flashing stock rom... Just download the official english rom and click on it when your phone is in bootloader mode and reads "USB" down bottom, then it will flash to your phone.
I don't even use HSPL when flashing custom roms... I use SSPL.

Maxnguyen said:
u mean delete the LEOIMG.bnh in SD card and take it off so how can i flash without put it into SD card ??
Click to expand...
Click to collapse
Flash over USB
Into bootloader, plug in usb cable, , when the word 'serial' becomes 'usb' on the phone, run your rom update.

Thax u ! ^^~ finnaly i did it ! thax u a lotttttttttttttttttttt

http://forum.xda-developers.com/showthread.php?t=631537
read this thread.. have your all required answers..

Guide: Flashing WP 7 on your HD2

Okay, so I finally found the WP7 Rom and the new MAGLDR 112 that comes in the zip with it.
It's on DFTs forum.
I've uploaded the text file from DFT's forum which includes the download links for the ROM and MAGLDR 112(included in the ROM's zip file)
It's a pretty simple process if you've already flashed your own NAND Android ROM.
First I suggest you backup your SD card and your current NANDroid.
Then enter your bootloader (hold volume down and power button while device is off)
Connect to your computer and start the RomUpdateUtility provided in the MAGLDR112 folder.
Follow the prompts and update to MAGLDR 1.12
After that, your device should restart.
In MAGLDR 1.12 go to USB flasher and wait for the USB connection.
Then run the DWI (as Admin in Win7/Vista) and follow the prompts to install WP7.
After that the device will reboot and instead of booting into Android it will boot into WP7.
Simple
To activate Windows Live services follow this guide http://forum.xda-developers.com/showthread.php?t=912218
It's pretty straight forward.

hey hey!
i still have win6.5 stock rom installed.
do i need to do anything different like flash it to nand droid rom.
Sorry if the question is a stupid one.I am a real NOOB!
Thanks for guidlines!

elasticity19 said:
i still have win6.5 stock rom installed.
do i need to do anything different like flash it to nand droid rom.
Sorry if the question is a stupid one.I am a real NOOB!
Thanks for guidlines!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=893948
Follow this guide first, up until the point where it tells you to flash the Android ROM, instead flash the Windows Phone 7 ROM, and don't forget to install MAGLDR 1.12(from the WP7 Rom zip file and not the MAGLDR 1.11 from the link above)

THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

seriously out of topic question
will your android boot up from SD card if u're running WM7
in eg: copying all the Android folders into SD card, and booting clrad/haret?

My phone wont go into magloader after flashing it, i am simply stuck on the bootup screen.
Any ideas?

xandercom said:
My phone wont go into magloader after flashing it, i am simply stuck on the bootup screen.
Any ideas?
Click to expand...
Click to collapse
Same problem here

DanneG said:
Same problem here
Click to expand...
Click to collapse
Any ideas?
I have tried installing with both a 64bit and 32bit machine as another user suggested that might resolve it.
My next step is going to be reflashing of the NRG rom I installed, see if that will revert and then try again.

xandercom said:
Any ideas?
I have tried installing with both a 64bit and 32bit machine as another user suggested that might resolve it.
My next step is going to be reflashing of the NRG rom I installed, see if that will revert and then try again.
Click to expand...
Click to collapse
no idea, I have triead with a win 7 & win xp machine, same problem.
Everything runs without any problems, exept its stuck on the bootup screen

Do you have HSPL 2.08?
Sent from my HD2 using XDA App

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC Desire using Tapatalk

Solved it!
Download a new radio
I'm using Leo_RADIO_2.15.50.14 now
http://forum.xda-developers.com/showthread.php?t=611787

Hi, for me I have update to wp7 already but when I plug the USB to my PC the phone it don't show me anything...i can't syn I can't use it as USB drive..so what next that I next to do?

DanneG said:
Solved it!
Download a new radio
I'm using Leo_RADIO_2.15.50.14 now
http://forum.xda-developers.com/showthread.php?t=611787
Click to expand...
Click to collapse
Is it necessary to have that radio? I have the Tmous Leo and I have 2.10.50.26 (Im pretty sure) and I got through the installation process. I havent activated it yet, Im waiting on the downloads of the WPDK and all (slow internet). Everything seems to be working wonderfully except for 1 problem: if my screen is off for more than a minute or two, it wont turn back on and I have to yank the battery and restart my phone. Any way to fix that? So far, setting the screen to never turn off works fine, but that will kill my battery while not plugged in.

"E1FATAL HIT 1" Problem.

I need help with this problem. I read the post and have them run what they say, but I still have the problem. When I give the option in MAGLDR "Ad Recovery", I get the following screen "1EFATAL HIT 1". I flashed with several options, I've done task 29, even I did hard reset and I returned the handset to factory defaults. But still the problem. I need help.

diwif said:
I need help with this problem. I read the post and have them run what they say, but I still have the problem. When I give the option in MAGLDR "Ad Recovery", I get the following screen "1EFATAL HIT 1". I flashed with several options, I've done task 29, even I did hard reset and I returned the handset to factory defaults. But still the problem. I need help.
Click to expand...
Click to collapse
Is this your first time trying MAGLDR and android on the HD2? If so do you have HSLP and the correct radio flashed? If you dont know then find a TUT that explains how to go from winmo to andoid tep by step.
Cheers,
Evil.

I have no problems installing Android rom for over a year. Lately install "ICS NexusHD2 CM9 (5.Feb.2012)." In a system reset occurred to me this problem. I've done hard factory reset, I installed HSPL 2, 3, 4, original SPL, etc. I changed several radios. I installed the original rom from sd, etc. MAGLDR I have reinstalled several times, just as with Recovery. No but I think it's internal memory, or not work properly. Do not know if changing the polarity on the battery, as when reversing the polarity on the stack for a PC. The truth is that I think has no solution.

Im right there with you my hd2 did this same thing and I have no answers either..

diwif said:
I have no problems installing Android rom for over a year. Lately install "ICS NexusHD2 CM9 (5.Feb.2012)." In a system reset occurred to me this problem. I've done hard factory reset, I installed HSPL 2, 3, 4, original SPL, etc. I changed several radios. I installed the original rom from sd, etc. MAGLDR I have reinstalled several times, just as with Recovery. No but I think it's internal memory, or not work properly. Do not know if changing the polarity on the battery, as when reversing the polarity on the stack for a PC. The truth is that I think has no solution.
Click to expand...
Click to collapse
tashsru said:
Im right there with you my hd2 did this same thing and I have no answers either..
Click to expand...
Click to collapse
Try this.
Download stock windows mobile rom
Extract LEOIMG.nbh from downloaded wm rom
format sd card
put nbh file onto root of sd card
shut down phone
power on phone and hold vol down + end key to enter bootloader
install stock windows mobile rom which uninstalls hspl and everything else
boot windows mobile
once booted turn off
install hspl again (2.08)
install magldr or clk
install cwm
reboot
install rom
reboot
I think that will fix your problems.

Hello
I followed all your instructions, but the problem persists. I put some pictures of the screens. A pulse is when the option MAGLDR "Ad Recovery", and the other is when I do the partitioning. Not if you serve something. Thanks anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
[/URL][/IMG]

diwif said:
Hello
I followed all your instructions, but the problem persists. I put some pictures of the screens. A pulse is when the option MAGLDR "Ad Recovery", and the other is when I do the partitioning. Not if you serve something. Thanks anyway.
[/URL][/IMG]
[/URL][/IMG]
Click to expand...
Click to collapse
:/ sorry I thought it would fix it.

check out this thread
http://forum.xda-developers.com/showthread.php?t=982454

nightmare
I have officially given up.. I think this hd2 is a lost cause I have tried everything and well its strange. I have a stock rom on it and its still the same. it boots bt freezes up after boot no response and only way to shut it off is to pull the battery. so i officially give up..

try sticking the phone in the freezer for couple min and flash it. if it works then u have hardware problem. happened to me when i received my cousins hd2, when i tried to flash it with android i got that e1fatal error. try it, it wont hurt.

CLK Recovery Boot Error

Hey guys. Decided to try and fix my old HD2 which I stopped using after it became stuck on the MAGLDR screen at Go Go Go. Recently flashed CLK 1.5 via SD card because my USB port on the phone is broken. Tried to boot into recovery and I get this message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas? Also when I checked the bad block table it said I had a single bad block at 812. The start position however begins at 278 and the end position is at 1322. Also stated that it was marked. The partition section of the bad block is stated as Recovery. Not sure if this means the phone should be put in the bin or not lol.

Have you tried to boot to clk, back key!

shanman-2 said:
Have you tried to boot to clk, back key!
Click to expand...
Click to collapse
Should of said that. CLK boots fine. I can repartition sections if I want. I can choose to start Android NAND or Android EMMC etc. That boots fine. I just get this random error when trying to boot to recovery

Not sure if you use clk to mark the bad block and then reinstall clk ... maybe could help!
I operate without usb port aswell, so am interested.
Fastboot vis wifi could be handy...

shanman-2 said:
Not sure if you use clk to mark the bad block and then reinstall clk ... maybe could help!
I operate without usb port aswell, so am interested.
Fastboot vis wifi could be handy...
Click to expand...
Click to collapse
Yeah I reinstalled CLK but no go. Same error when trying to boot to recovery. Shame I can't load a rom from the SD card

DramatikBeats said:
Yeah I reinstalled CLK but no go. Same error when trying to boot to recovery. Shame I can't load a rom from the SD card
Click to expand...
Click to collapse
Boot to cLK and see what is the bad blocks layout for your phone like. Increase the recovery partition to, say, 7 MB and try flashing recovery alone again- I suggest CWM 5.0.2.6 for starters.
Swyped from my HTC HD2 using XDA app

ph03n!x said:
Boot to cLK and see what is the bad blocks layout for your phone like. Increase the recovery partition to, say, 7 MB and try flashing recovery alone again- I suggest CWM 5.0.2.6 for starters.
Swyped from my HTC HD2 using XDA app
Click to expand...
Click to collapse
Thanks for the tip but how do I flash Recovery alone without being able to use my usb port? I keep coming across CLK builds that are pre-bundled with Recovery but have not see a recovery build that I can install via sd card.
Edit: I reinstalled CLK and the bad block is in the system partition. So the recovery partition should of installed properly, it has no bad blocks. I'm still getting that error message if I try to boot into recovery after CLK starts. If I hold the home button to boot straight into recovery the phone gets stuck on the HTC boot logo

Anyone got any ideas before I chuck this phone in the bin?

DramatikBeats said:
Anyone got any ideas before I chuck this phone in the bin?
Click to expand...
Click to collapse
I see that you are using my black variant of cLK. Which version do you have installed? Did you try the stable cLK 1.5.rc1 first?
Well, 1.5.0.5 had an issue with the partition table;it was messed up after some certain changes (i.e. adding sboot).
Latest version (1.5.0.6) has this issue fixed.
So start from re-installing newer cLK (see my sig / cLK 1.5.black) and see if you still cannot boot into recovery.
Regards!

kokotas said:
I see that you are using my black variant of cLK. Which version do you have installed? Did you try the stable cLK 1.5.rc1 first?
Well, 1.5.0.5 had an issue with the partition table;it was messed up after some certain changes (i.e. adding sboot).
Latest version (1.5.0.6) has this issue fixed.
So start from re-installing newer cLK (see my sig / cLK 1.5.black) and see if you still cannot boot into recovery.
Regards!
Click to expand...
Click to collapse
Just installed 1.5.0.6. Same error when booting to recovery unfortunately.

Just change the size of the recovery partition in cLK to 7MB, commit the change, reflash the cLK NBH again, reboot to cLK, change recovery partition size back to what you set I the earlier step, commit changes, see if recovery boots.
The logic is- When you change a partition size in cLK, the underlying data is not destroyed. So when you set recovery as 7MB first, that layout will remain when you flash cLK the second time, just the marker for recovery will default to 5MB. Redoing the same partition layout will give recovery the needed space AND it will already be there in a 7MB partition, so it should boot.
I have never tried it for recovery, but have done this for /data and it works. Try it.
Alternatively, you can change the order of the positions and move cache to recovery's place, reflash cLK and then set the order again (cache to recovery's place).
Read up the cLK thread and the NAND bad Bocks thread, and sure there are creative solutions
Swyped from my HTC HD2 using XDA Premium

ph03n!x said:
Alternatively, you can change the order of the positions and move cache to recovery's place, reflash cLK and then set the order again (cache to recovery's
Click to expand...
Click to collapse
Unfortunately, the way it works now does not allow to change 'recovery' partition's order from the phone's menu(cause then you'll need a pc to reflash recovery and the purpose is to be pc-free).
You can do it through fastboot commands but this is not applicable in DramatikBeats' case since the USB port on the phone is broken.
So all that I could think of to help is to create a *.nbh file which has the recovery partition at 2nd place (after an empty one). I have tried it on my phone and I can enter to recovery as usual. Didn't try any other feature!
If the problem insists, then maybe the hardware problem extends beyond the broken USB port...Can't be sure
Regards!

kokotas said:
Unfortunately, the way it works now does not allow to change 'recovery' partition's order from the phone's menu(cause then you'll need a pc to reflash recovery and the purpose is to be pc-free).
You can do it through fastboot commands but this is not applicable in DramatikBeats' case since the USB port on the phone is broken.
So all that I could think of to help is to create a *.nbh file which has the recovery partition at 2nd place (after an empty one). I have tried it on my phone and I can enter to recovery as usual. Didn't try any other feature!
If the problem insists, then maybe the hardware problem extends beyond the broken USB port...Can't be sure
Regards!
Click to expand...
Click to collapse
Thank you for trying mate. Still getting the same error so I believe the phone is busted. The fact that MAGLDR couldn't boot up past the GO GO GO screen and CLK being stuck at a similar point leads me to think that this phone is now R.I.P. unfortunately. Would of been nice to have this guy as a second phone since he's served me well throughout the years. Thanks again though!

DramatikBeats said:
Thank you for trying mate. Still getting the same error so I believe the phone is busted. The fact that MAGLDR couldn't boot up past the GO GO GO screen and CLK being stuck at a similar point leads me to think that this phone is now R.I.P. unfortunately. Would of been nice to have this guy as a second phone since he's served me well throughout the years. Thanks again though!
Click to expand...
Click to collapse
i know that this is a dead tread but i've found out the same problem but the bad block is in the system partition and is marked... anyone could help?

Stuck on boot (soft-bricked?)

Hello there,
So I've tried to put Android on my HTC HD2, but now it wont boot anymore. When I try to run CustomRUU, I get error: 270. (Yes, I've installed the HSPL 2.08 thingy) Now when I boot my phone, all I see is a white screen (infinite loop). I've also tried to wipe my phone with the power button up and down pressed while my phone is powering on, this seems to work, but when it's finished, all I see is the HTC logo with a yellow-ish background.
I would be very happy if someone could help me and knows a solution to this problem.
Sapphire~

little help
darkshadw said:
Hello there,
So I've tried to put Android on my HTC HD2, but now it wont boot anymore. When I try to run CustomRUU, I get error: 270. (Yes, I've installed the HSPL 2.08 thingy) Now when I boot my phone, all I see is a white screen (infinite loop). I've also tried to wipe my phone with the power button up and down pressed while my phone is powering on, this seems to work, but when it's finished, all I see is the HTC logo with a yellow-ish background.
I would be very happy if someone could help me and knows a solution to this problem.
Sapphire~
Click to expand...
Click to collapse
use HD2 TOOLKIT 4.2 or 4.3.1
boot the phone to bootloader [ the tri-color screen ] power + volume down ]
run task29
run bootloader again
load CLK or magldr
run bootloader again
load Leo_Radio_2.15.50.14
IF CLK
during boot hold power key+ the back arrow key
IF MAGLDR
it will autoboot to magldr menu
Choose the rom you want, read instructions how to install it.

ya5 said:
use HD2 TOOLKIT 4.2 or 4.3.1
boot the phone to bootloader [ the tri-color screen ] power + volume down ]
run task29
run bootloader again
load CLK or magldr
run bootloader again
load Leo_Radio_2.15.50.14
IF CLK
during boot hold power key+ the back arrow key
IF MAGLDR
it will autoboot to magldr menu
Choose the rom you want, read instructions how to install it.
Click to expand...
Click to collapse
Thanks for your reply, but the only result I get are errors . I followed your steps exactly, here are some screenshots of what happens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I remember to had this error and you doing something wrong, now I forgot, BTW, did you installed the Radio 2.15 after Cotulla HSPL4?

eclyptos said:
I remember to had this error and you doing something wrong, now I forgot, BTW, did you installed the Radio 2.15 after Cotulla HSPL4?
Click to expand...
Click to collapse
I am not able to due to these errors.

darkshadw said:
I am not able to due to these errors.
Click to expand...
Click to collapse
Is not be "able", is something what you forgot to do. It can be even a problem with your USB which you don't know to have, which it not mean is not working properly but in some circumstances like flashing HD2 can get errors. I had those a lot and when I learned I rid of them all but at the moment I don't have mine HD2 to test it again. I already posted all the tools and guide here, if I find it, I will post it for you. BTW, I will recommend to use separate tools for each flash. I don't like the Toolkits.

eclyptos said:
Is not be "able", is something what you forgot to do. It can be even a problem with your USB which you don't know to have, which it not mean is not working properly but in some circumstances like flashing HD2 can get errors. I had those a lot and when I learned I rid of them all but at the moment I don't have mine HD2 to test it again. I already posted all the tools and guide here, if I find it, I will post it for you. BTW, I will recommend to use separate tools for each flash. I don't like the Toolkits.
Click to expand...
Click to collapse
Thanks, I did use seperate tools before I started this thread. Also, the USB is in a good state afaik, I've used it to root my HTC Wildfire and my Samsung Galaxy S3.

darkshadw said:
Thanks, I did use seperate tools before I started this thread. Also, the USB is in a good state afaik, I've used it to root my HTC Wildfire and my Samsung Galaxy S3.
Click to expand...
Click to collapse
Ok, then you are not new to this. Let me see if I find something.

eclyptos said:
Ok, then you are not new to this. Let me see if I find something.
Click to expand...
Click to collapse
Thanks, much appreciated!

darkshadw said:
Thanks, much appreciated!
Click to expand...
Click to collapse
...in the main time try, if you can, use different PC...

eclyptos said:
...in the main time try, if you can, use different PC...
Click to expand...
Click to collapse
Already did , same results >.<

Using power & volume button
> While phone is Off: Hold Volume down & press power button
can you get to bootloader if so post details of bootloader information exactly as you see them

Mister B said:
Using power & volume button
> While phone is Off: Hold Volume down & press power button
can you get to bootloader if so post details of bootloader information exactly as you see them
Click to expand...
Click to collapse
This is the screen I get:

darkshadw said:
This is the screen I get:
Click to expand...
Click to collapse
When you connect to PC instead of Serial text do you get USB?

darkshadw said:
This is the screen I get:
Click to expand...
Click to collapse
I would suggest using a 2 or 4gb memory card & try flashing a custom ROM & radio from sd card via this bootloader.
sd flashing tutorial here: http://forum.xda-developers.com/showthread.php?t=681317
Use only a custom rom such as linked below along with radio link. Doing with custom ROM has no SPL so you will retain the HSPL & have no issues with CID errors.
Custom ROM: http://www.mediafire.com/download/bhh47jlowm9zph6/Energy.Leo.23699.Sense2.5.Reference.Nov.24.7z
Radio: http://htcfanboys.com/download/joplayer/files/HTC HD2/Radios/Radio Leo 2.15.50.14.rar
The versions above are safe flash on any HD2 variant
Try flashing radio first then rom, if fails flash rom then radio, if suceeds it may resolve the mess you in now & allow easier further flash (after testing device stable) to your required ROM
if fails you could try an original rom via SD if you now what CID version it should be but you will loose HSPL with original rom & sd flash as first flash stage is the SPL & be extra careful if have the USA T-Mobile HD2 as wrong rom radio versions can brick it. Read HD2 wiki for more info:
http://forum.xda-developers.com/wiki/HTC_HD2

Mister B said:
I would suggest using a 2 or 4gb memory card & try flashing a custom ROM & radio from sd card via this bootloader.
sd flashing tutorial here: http://forum.xda-developers.com/showthread.php?t=681317
Use only a custom rom such as linked below along with radio link. Doing with custom ROM has no SPL so you will retain the HSPL & have no issues with CID errors.
Custom ROM: http://www.mediafire.com/download/bhh47jlowm9zph6/Energy.Leo.23699.Sense2.5.Reference.Nov.24.7z
Radio: http://htcfanboys.com/download/joplayer/files/HTC HD2/Radios/Radio Leo 2.15.50.14.rar
The versions above are safe flash on any HD2 variant
Try flashing radio first then rom, if fails flash rom then radio, if suceeds it may resolve the mess you in now & allow easier further flash (after testing device stable) to your required ROM
if fails you could try an original rom via SD if you now what CID version it should be but you will loose HSPL with original rom & sd flash as first flash stage is the SPL & be extra careful if have the USA T-Mobile HD2 as wrong rom radio versions can brick it. Read HD2 wiki for more info:
http://forum.xda-developers.com/wiki/HTC_HD2
Click to expand...
Click to collapse
Help, The instructions for flashing via MicroSD doesn't work for me. They say I have to boot to the bootloader until a 'searching' thingy comes up, but it doesn't. Any idea? I'm starting to get affraid it's broken ;~;, please help me
EDIT: I can see the searching thingy flash by real fast! I see it for maybe 50ms and after that it just goes back to the bootloader again... Any idea :/?
EDIT2: Okai.. .I've figured out why that happend, apparently, the SD card isn't supported or something like that (yes it's formatted in FAT32 format). But do I have to flash the radio also via sd? Because It says it failed in red letters.

try another sd and format it, be sure rename the file correctly or it will not work. If Rom flashes but radio will not try another radio version such as 2.12.50.02_2 (in my sig below), you can also try booting and see what happens & even retry usb flashing for the radio or even a complete original rom .

Mister B said:
try another sd and format it, be sure rename the file correctly or it will not work. If Rom flashes but radio will not try another radio version such as 2.12.50.02_2 (in my sig below), you can also try booting and see what happens & even retry usb flashing for the radio or even a complete original rom .
Click to expand...
Click to collapse
I get this now...? It will just reboot if I leave it like this for a few minutes...

Well ...
darkshadw said:
I get this now...? It will just reboot if I leave it like this for a few minutes...
Click to expand...
Click to collapse
Dear friend ... I had such problem before ... but when I tried with HD2Toolkit and Windows XP , The Serial Changed into USB ... you know ? maybe related to the drivers ... I just recommend you to try with Windows XP ... Good Luck
With best Wishes
Hitman1376​

Mmm not looking too promising, I would suggest first off fully charging & then putting in a clear zip lock or seal bag & putting in fridge to let cool for an hour or a freezer for 15 minutes then remove & pop rear cover & reset device using the reset pin pressed & kept pressed till device vibrates then watch boot process & see if proceeds further/fully.
You could also try flashing via cable again & do so using files in my links & see if get any better results & perhaps try an original complete ROM (loads of links in HD2 Wiki) via USB flash & also by SD if you know what country & vendor your device was .