Hello guys,
i have a new SE X2, and normally when i get a new mobile phone i want to update it. But now comes my problem, on SEUS after i presses quiter and power button and connect to pc after that nothing happen only normaly starts.
Do have anyone a idea how to solve this problem?
thank you very much for help
ps. sorry for my bad english
is it able to update the software from sd, like on X1? or is any special driver needed to run SEUS for X2?
Maybe another software exists to update the X2, but i havent found anyone
there be search button
Related
Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!
I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers
Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? Can´t find it anywhere. Loved that thing...
Thanx!
I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....
i am on the pc for 8-10 hours to solve the problm on this ****ing s200, after a hard reset the device start to work well , but when i ll do a soft reset it could not establish a connection with the pc again moreover "error opening the shortcut or locating the target filename" is shown when i click the comm manager button. i assume that it may be a problem because of the rom version, although i search all the forum and some other sources i cant find a s200 rom which is working, finally i installed the altest version of 818 pro 2.15.13.27 which i founded in the forum. then when i install some software and make a soft reset the device refuse to open and the calibration screen is shown. i dont know what is happened but i am sure that there are some hardware problem. i dont know if somebody else have this kind of problem?? i have also a jamin and it works perfectly with its latest rom. finally give a few dollars more and buy jamin if you really want to use those htc staff...
ps: I am not sure but maybe if s200 ROM will be installed the problem is solved but it refused to install an older rom , now all the soft reset cause the setup screen of windows!!!
Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...
wfreed said:
Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...
Click to expand...
Click to collapse
Have you tried to install another ROM? with a different Bootloader
Battery?
Check the Wiki, there is a lot of usefull info there
Good luck
Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!
wfreed said:
Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!
Click to expand...
Click to collapse
Hi
here you can find one: http://forum.xda-developers.com/showthread.php?t=409966
The other questions I am no the master, so let´s learn form them
Cheers
Thanks a lot all yours!!
I solve my trouble reflashing my WM5 rom...
I used the Jwrightmcps Crossbow ROM Update 2.12.08 WWE, very fast and very stable WM6 rom! Realy a amazing work by our friend Jwrightmcps!
Including, I want suggest here that all those that still suffering in WM5 (living slowly with crashes, troubles, crashes, more troubles and this poor and slow system), try reflash your HTC with a rom like this... my device reborn!! It was dead more now is alive!!! And much more fast and stable! Before it is slowly my old Jornada 720 (206MHz), but now it realy seems have 520MHz!
Thanks a lot for all.
The link for this excelent work is HERE:
Jwrightmcps Crossbow ROM Update 2.12.08 WWE
(Download the apropriate rom to your device, folow the instructions and EnJoY!! Be HaPpY!!)
This rom don't supports 8GB SDHD cards, but download and Install 2 cabs below and it will support it:
CAB01 - SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_Fre ePK.cab
CAB02 - Signed_Storage_Settings_App.cab
Special thanks to big_quads for this solution!
Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"
What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.
4m4s0 said:
Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"
Click to expand...
Click to collapse
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop
mtechfan said:
What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.
Click to expand...
Click to collapse
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...
kronos1 said:
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop
Click to expand...
Click to collapse
The customizations programs...
what?!
I am able to turn it on, but it's like an empty windows..
Everytime I restart the phone it asks me if I want to factory-reset it, and when I tap "Yes" it freezes at istallation of "_setupJbed.CAB"
4m4s0 said:
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...
Click to expand...
Click to collapse
I was referring to the OS on the computer, not the phone.
mtechfan said:
I was referring to the OS on the computer, not the phone.
Click to expand...
Click to collapse
Oj... Sorry... WinXP SP3
you must install microsoft activesync 4.5 first.
===unreail from china===
unreail said:
you must install microsoft activesync 4.5 first.
===unreail from china===
Click to expand...
Click to collapse
Already did that...
I have an idea for you.
Press no to the factory reset and let the phone start up, then...
yes, I know this is tedious but install all the individual cabs from an extracted ROM you want one by one. When completed you should have a full version again. You can even try to see if the update works again.
Check here -> http://forum.xda-developers.com/showthread.php?t=683619
Please make sure you only install the cabs relevant to which OS you have o the phone. This means... if you have 6.5.2 then only get cabs from a 6.5.2 Rom. Ditto for 6.5.3
As you may have heard already, I am moving over to Android now and have sent my X2 back. So I am sorry I cant help any more than this.
i tried to update my xperia x2 but i felt the phone is not responding and i disconeccted it then when i start it it worked but the i install some apps and the restarts and never start up again the phone give a small tone on the orange microsoft screen and after a few seconds it's turned off.
any one can help me please ?
thank you for replying back to me and helping me solving the problem.
you are the best
Can you share the solution? Thanks...
don't worry bro, just Repeat the same process(means update process) using SEUS.
follow the instructions as required by the SEUS.
i did the SEUS update again but it failed so i had to take it to a pro man to fix it.
Since you posted this a while ago, i am wondering if you found the solution to your phone. I see the same issue with my X2, the screen is just dead and does not start..
How was your issue fixed??
shrayyef your problem will be solved if you follow exactly what I'm going to say.
I had the same problem with se x2 and I tried many many many times untill I solve the problem all you need install update service of sony ericsson and make update for your phone if it doesnt work try to find a good computer with a good usb port because X2 needs 0.2 port I hope it will work for you and good luck man
There's no update service available for X2 anymore.
This is same with my problem
my xperia x2 now isn't on if i press power button.. only vibrate..
anyone can help this problem..?